Printing grade frosted PC film suitable for special printing, helmets, signs, nameplates, protective covers, etc. Anti-scratch PC film Uses: window lenses for electronic products such as mobile phones, MP3, MP4, DVD, backlight sources, etc. It has excellent physical and mechanical properties, especially excellent impact resistance, high tensile strength, flexural strength and compressive strength; good heat resistance and low temperature resistance, stable mechanical properties in a wide temperature range, size Stability, electrical properties and flame retardancy, can be used for a long time at -60~120; no obvious melting point, melted at 220-230; high rigidity, high viscosity of resin melt; low water absorption and small shrinkage , Small creep, high dimensional accuracy, good dimensional stability, low permeability of the film; it is a self-extinguishing material; stable to light, but not resistant to ultraviolet light, good weather resistance; oil resistance, acid resistance.
Printing grade frosted PC film suitable for special printing, helmets, signs, nameplates, protective covers, etc. Anti-scratch PC film Uses: window lenses for electronic products such as mobile phones, MP3, MP4, DVD, backlight sources, etc. It has excellent physical and mechanical properties, especially excellent impact resistance, high tensile strength, flexural strength and compressive strength; good heat resistance and low temperature resistance, stable mechanical properties in a wide temperature range, size Stability, electrical properties and flame retardancy, can be used for a long time at -60~120; no obvious melting point, melted at 220-230; high rigidity, high viscosity of resin melt; low water absorption and small shrinkage , Small creep, high dimensional accuracy, good dimensional stability, low permeability of the film; it is a self-extinguishing material; stable to light, but not resistant to ultraviolet light, good weather resistance; oil resistance, acid resistance.
Printing grade frosted PC film suitable for special printing, helmets, signs, nameplates, protective covers, etc. Anti-scratch PC film Uses: window lenses for electronic products such as mobile phones, MP3, MP4, DVD, backlight sources, etc. It has excellent physical and mechanical properties, especially excellent impact resistance, high tensile strength, flexural strength and compressive strength; good heat resistance and low temperature resistance, stable mechanical properties in a wide temperature range, size Stability, electrical properties and flame retardancy, can be used for a long time at -60~120; no obvious melting point, melted at 220-230; high rigidity, high viscosity of resin melt; low water absorption and small shrinkage , Small creep, high dimensional accuracy, good dimensional stability, low permeability of the film; it is a self-extinguishing material; stable to light, but not resistant to ultraviolet light, good weather resistance; oil resistance, acid resistance.
Introduction: 1. Equipped with SYNRAD RF excited laser, better laser mode, longer working life and higher stability, suit for long time continuous work. Or domestic laser source with low price and simple maintenance. 2. High speed galvanometer scanning system, suitable for mass production. 3. PC controlled, friendly interface and easy operation. 4. Input format, bmp, jpg, dxf, plt, etc. Application: 1. It is particularly well suitable for marking or engraving on nonmetal materials, including PMMA (acrylic), organic glass, bamboo, wood, resin, plastic, paper, cloth, leather, home appliance, IC, etc. 2. Applicable products and industries: garment accessories, pharmaceutical packing, architectural ceramics, beverage packing, fabric cutting, rubber, nameplate, IC, leather, etc. 3. Besides the general marking machines, Tianhong also have the specific ones for specific clients regarding different products for production lines, such as the button marking machine, bearing production line marking machine, caliper marking machine, etc.
Best Signs Making CNC Router for Small Shop Model: A6090C This signs making cnc router is widely used in advertising industry, it is a helpful machine for small business. Best CNC router good for signs making, logos making, decoration, crafts making, vinyl signs, carved wood signs, numbers, letters, stencil, stencil signs, POP signage, ADA signage, 3D signs, office signs, business signs, interior signs, outdoor signs, sculptures,Gemini Letters, 3 Dimentional letters, Mall Signs, Institutional sign, Nameplates, Braille Signs, Engraved signs, Metal signs, Acrylic letters, Donor Walls, Way finding Signs, custom signs and custom signage etc. This signs cnc router is a very compact useful cnc kits for small business. CNC Sign Router Applications: 1, 2D signs, 3d signs, plastic molding, characters cutting, LED light slot, light box molding, logo production etc. 2, For most advertising material working, such as acrylic, plastic board, double color board, MDF, PVC etc, meanwhile soft metal, like copper, aluminum and simple woodworking.
4x8 Plywood CNC Router Plywood Sheets CNC Cutting Machine Model: 1325V This 4X8 plywood cnc cutter is widely used in plywood sheet cutting, chipboard cutting, particle board cutting, slatwall cutting, furniture industry, furniture decoration industry, woodworking decoration industry, musical instrument industry, wooden crafts industry, etc. And this machine is suitable for large area plate engraving, solid wood furniture engraving, solid wood art murals carving, MDF carving and cutting, etc. Application of plywood cnc cutting machine: Woodworking Industry: stereo wave board processing, wooden door, various furniture product auxiliary processing, plywood cutting. Advertising Industry: Advertising label, PVC plate, PCB board (drilling and engraving), Double color boards, logo production, acrylic cutting, plastic suction for making advertising dedication, word cutting, sign making, crystal word, LED display screen, kinds of doorplate, nameplate and so on. Mold Industry: Apply for carving various molds, wood pattern, Foam mould, and metal mold, etc. Musical instrument industry: instrument 3D surface engraving, shape cutting Wooden crafts. Exhibition industry: showcase, etc.
This kind tape used clear polyester film as carrier,both side coated with acrylic adhesive for permanent sticky and then both side covered with release paper as release liner. It would be also called spacer tape. Features Good initial adhesion,good retention viscosity. Excellent insulation and temperature resistance,especially for the PET film has a strong adhesion. High tensile strength,good weather resistance,according to EU environmental directive production. There are stripping layers on both sided,which is easy to be machined. Application Membrane switch insulation spacer(membrane switch line up and down isolation insulation) Membrane keyboard Nameplate or panel bonding,PP,PC,ABS and other plastic made of products bonding. Product construction Backing material PET film Type of adhesive solvent acrylic Total thickness 0.125mm/0.138mm/0.15mm/0.175mm/0.2mm/0.225mm/0.275mm Color Transparent Release liner white paper+printing paper
We can supply Stainless Steel D Belts in different types of thicknesses, gauges, grades and sizes. Product: Stainless steel strip. Process: cold rolling. Product specifications: 0.2-6mm thickness; width can be customized. Packing: standard export packing. Surface treatment: 2B, BA, NO.1, NO.4, 8K, HL, wire drawing, mirror surface, oil grinding, polishing, etc. Grades: 304L, 316H, 316L, 316TI, 317L, 310S, 436L, 904L, 201, 301L, 304, 304H, 321, 2205. Processing type: Slitting Applications: architectural decoration, elevators, household appliances, kitchen and bathroom, advertising nameplates, roof structures, machinery manufacturing, petrochemical, boiler containers, etc.
We supply Stainless Steel Coils in different types of thicknesses, gauges, grades and sizes. Product: Stainless Steel Coil. Process: cold rolling, hot rolling. Product specifications: 0.2-16mm thickness; width and length can be customized. Packing: standard export packing. Surface treatment: 2B, BA, NO.1, NO.4, 8K, HL, wire drawing, mirror surface, oil grinding, polishing, etc. Grades: 304L, 316H, 316L, 316TI, 317L, 310S, 436L, 904L, 201, 301L, 304, 304H, 321, 2205. Processing type: leveling, slitting, cutting, bending, stamping, CNC machining, laser cutting, etc. Applications: architectural decoration, elevators, household appliances, kitchen and bathroom, advertising nameplates, roof structures, machinery manufacturing, petrochemical, boiler containers, etc.
We can supply stainless steel plates in different types of thicknesses, gauges, grades and dimensions. Product: stainless steel plate. Process: cold rolling, hot rolling. Product specifications: 0.2-16mm thickness; 1219/1500/1800mm width; 2438/3000/6000 length. (Note: width and length can be customized) Packing: standard export packing. Surface treatment: 2B, BA, NO.1, NO.4, 8K, HL, wire drawing, mirror surface, oil grinding, polishing, etc. Grades: 304L, 316H, 316L, 316TI, 317L, 310S, 436L, 904L, 201, 301L, 304, 304H, 321, 2205. Processing type: leveling, slitting, cutting, bending, stamping, CNC machining, laser cutting, etc. Applications: architectural decoration, elevators, household appliances, kitchen and bathroom, advertising nameplates, roof structures, machinery manufacturing, petrochemical, boiler containers, etc.
We supply Stainless Steel Coils in different types of thicknesses, gauges, grades and sizes. Product: Stainless Steel Coil. Process: cold rolling, hot rolling. Product specifications: 0.2-16mm thickness; width and length can be customized. Packing: standard export packing. Surface treatment: 2B, BA, NO.1, NO.4, 8K, HL, wire drawing, mirror surface, oil grinding, polishing, etc. Grades: 304L, 316H, 316L, 316TI, 317L, 310S, 436L, 904L, 201, 301L, 304, 304H, 321, 2205. Processing type: leveling, slitting, cutting, bending, stamping, CNC machining, laser cutting, etc. Applications: architectural decoration, elevators, household appliances, kitchen and bathroom, advertising nameplates, roof structures, machinery manufacturing, petrochemical, boiler containers, etc.
We can supply stainless steel plates in different types of thicknesses, gauges, grades and dimensions. Product: stainless steel plate. Process: cold rolling, hot rolling. Product specifications: 0.2-16mm thickness; 1219/1500/1800mm width; 2438/3000/6000 length. (Note: width and length can be customized) Packing: standard export packing. Surface treatment: 2B, BA, NO.1, NO.4, 8K, HL, wire drawing, mirror surface, oil grinding, polishing, etc. Grades: 304L, 316H, 316L, 316TI, 317L, 310S, 436L, 904L, 201, 301L, 304, 304H, 321, 2205. Processing type: leveling, slitting, cutting, bending, stamping, CNC machining, laser cutting, etc. Applications: architectural decoration, elevators, household appliances, kitchen and bathroom, advertising nameplates, roof structures, machinery manufacturing, petrochemical, boiler containers, etc.
High Adhesion No-Wove Tissue Double Sided Tape Descriptions: Tissue double sided tape is made from non woven-tissue paper coated on both sides with acrylic adhesive or hot melt rubber adhesive andlaminated with release paper. Tissue double sided tapes made with wide range of adhesive to get different adhesion level and so makes its application wider. We also make repulpable tissue tapes for news paper and printing industries and which is environmental friendly products as its fully recyclable. Features: Excellent tack and good strength for immediate bonding, good resistance to solvent, heat and chemical. Applications: Foam and felt lamination in automobile and appliances manufacturing. Splicing of films/paper/ oils, lamination and fastening in paper/plastic and printing industries, adhere posters and envelopes, in shoe and leather industry, for computerized embroidery, for mounting nameplates, metal/polycarbonate stickers etc.
Aluminum plates whose purity can reach over 99.00% are called pure aluminum plates. Commonly used alloy codes for industrial pure aluminum plates are 1050, 1060, and 1100. Among all aluminum plate series, the pure aluminum plate series contains the most aluminum. Series 1 aluminum plates have the advantages of low density, easy processing, corrosion resistance, good electrical and thermal conductivity, strong reflectivity, and low price. They are widely used in lighting fixtures, reflectors, decorations, chemical industry containers, heat sinks, signs, electronics, Lamps, nameplates, electrical appliances, stamping parts and other products.
The parameters of the 8-liter pearl pot are as follows (fully intelligent setting) 1. Customizable 110V, 220V, English export and cross-border e-commerce versions, Provide American, British, European, Australian and other power cables. 2. Chinese operation panel, English manual, English nameplate, English Certificate of conformity, neutral packaging. 3. Power: 1350W 4. Material: Aluminum alloy non stick inner liner 5. Single unit weight: 6kg, packaging size: 41cm * 31cm * 35.5cm 6. 4 units per piece: 25kg 7. Packaging type: One unit, one white bag+difference sticker (can be labeled)
Our company provide 330kV oil-immersed power transformer ,with capacity of 360MVA and below. The transformer is based upon world-wide advanced technology and also incorporates the experiences of internationally leading transformer companies as well as our own long-term experiences. Low loss, low partial discharge and high short circuit withstand capability series transformers are achieved through innovation and optimization. Our transformer conform entirely with latest national standard GB1094.1~2-1996, GB1094.3-2003, GB1094.5-2003 and international standard IEC-76. Outstanding features as follows: 1. Low loss, low noise The core laminations are composed of imported high quality grain-oriented cold-rolled silicon steel sheets with chamfered joints and the joints are step-lapped with 5 steps, thus ensuring low loss and low noise. The inside of the tank is lined with magnetic and copper shields, measures have been take for metallic structural pares located in high magnetic field, to deduce stray loss and thereby the total load loss, and to relieve local overhearing. Performance standard of 330kV class transformers which designed and manufactured by our company, can reach GB 10-type or GB11-type, and the noise is much lower than GB. 2. Safe and reliable service Reliability is the everlasting objective of our company, partial discharge of finished products are constantly kept below 100pC, ensuring that the transformers can be operated under long service voltage and occasional over-voltage without trouble. Low current density in winding conductor and appropriate cooling arrangement ensure that the winding temperature rise and top oil temperature rise are lower than that specified in the national standard by more than 5K and that the mechanical stress in winding conductor during short circuit does not exceed certain safe limit. Together with technological procedures during manufacture and other means to elevate mechanical strength, transformers can withstand server short circuit in all case during service. 3. Easy erection and maintenance To minimize erection work at sit, transformers are so fabricated that lifting the active part out of the tank for inspection after arrival at sit is not mandatory. Beside, all components to be mounted on the transformer at site have been preassembled before dispatch, and all secondary wirings have been laid down into conduits on the transformer and connected to the terminals in the control cabinet or terminal box. Natural oil circulation and forced air cooling (ONAF) are generally adapted in our 180kV class transformers below 240MVA. 70% nameplate rating can still be achieved in case the fans are out of service. Little maintenance work is required for the cooling devices. 4. Careful fabrication Vertical winding machines with tension device are used for winding, so that the windings can be wound more tightly and therefore mechanically strength as a whole. All insulation parts subjected to mechanical stress during short circuit, such as spacers in windings are made with T4 densified pressboard to deduce shrinkage. Drying process for the windings are carried out twice, once for ht individual winding, and again for the assembled phase block. After core and coil assembly, an additional vapor phase drying (VPD) is once more carried out to ensure that all insulation parts are thoroughly dried and no further shrinkage is possible to occur during service. All the high voltage terminals and nearby metallic structural parts are rounded up to prevent partial discharge. High voltage bushing terminals are contained with turrets, and kept concentric with the turret. All the leads are properly crimped and metallized to be rounded up. VPD process insures that the moisture content within the transformer is kept at a very low level, and the core and coil assembly is once more cleaned by condensed vapor flowing down the surfaces. The fabricated tanks are relived from welding stress and shot-blasted integrally, so as to be free form oil leakage trouble and to give the tank a clean, pleasant looking appearance. fumigation wooden case
for the measurement of electrical variables in heavy current power system RISH Ducer M40 (Fig. 1) is a programmable transducer with a RS 485 bus interface (MODBUS ). It supervises several variables of an electrical power system simultaneously and generates 4 proportional analogue output signals. The RS 485 interface enables the user to determine the number of variables to be supervised (up to the maximum available). The levels of all internal counters that have been configured (max. 4) can also viewed. Provision is made for programming the RISH Ducer M40 via the bus. A standard EIA 485 interface can be used, but there is no dummy load resistor for the bus. The transducers are also equipped with an RS 232 serial interface to which a PC with the corresponding software can be connected for programming or accessing and executing useful ancillary functions. This interface is needed for bus operation to configure the device address, the Baud rate and possibly increasing the telegram waiting time (if the master is too slow) defined in the MODBUS protocol. The usual methods of connection, the types of measured variables, their ratings, the transfer characteristic for each output and the type of internal energy metering are the main parameters that can be programmed. The ancillary functions include a power system check, provision for displaying the measured variably on a PC monitor, the simulation of the outputs for test purposes and a facility for printing nameplates. The transducer fulfils all the essential requirements and regulations concerning electromagnetic compatibility(EMC) and safety (IEC 1010 resp. EN 61 010). It was developed and is manufactured and tested in strict accordance with the quality assurance standard ISO 9001. nSimultaneous measurement of several variables of a heavycurrent power system / Full supervision of an asymmetrically loaded four-wire power system, rated current 1 to 6 A, rated voltage 57 to 400 V (phase to neutral) or 100 to 693 V (phase-ton phase) nFor all heavy-current power system variables n4 analogue outputs nInput voltage up to 693 V (phase-to-phase) nUniversal analogue outputs (programmable) High accuracy: U/I 0.2% and P 0.25% (under reference nconditions) 4 integrated energy meters, storage every each 203 s, storage nfor: 20 years Windows software with password protection for programming, data analysis, power system status simulation, acquisition of nmeter data and making settings DC-,AC-power pack with wide power supply tolerance / nuniversal Provision for either snapping the transducer onto top-hat rails or securing it with screws to a wall or panel
Introduction Joda Technology Co., Ltd. adhering to the "customer first, forge ahead" business philosophy, adhere to the "customer first" principle to provide our clients with quality services. The company has the world's advanced production equipment, all products have passed ISO9001, 9002 quality system certification, a variety of products have been awarded national, provincial and ministerial quality products, products are widely used in aerospace, instrumentation, chemicals, construction, packaging, air conditioning, Solar energy, refrigerators and other industries. Main products 1 series industrial pure aluminum, 2 series super hard aluminum, 3 series easy cut aluminum, 4 series easy cut aluminum, 5 series magnesium alloy, 6 series anodized, corrosion resistant aluminum, 7 series aviation super hard aluminum. Characteristic There are more than 1000 aluminum alloy grades registered in the world. Each grade of European and American metal has various states.And obvious differences in hardness, strength, corrosion resistance, workability, weldability and decoration. When European and American companies choose the grade and status of aluminum alloy, it is difficult to meet the above aspects at the same time, and it is not necessary. According to the performance requirements of the product, the usage environment, the processing process and other factors, prioritize various performances. To a reasonable selection of materials. The main Applications Our aluminum coil products are widely used in construction, packaging, air conditioning, chassis cabinets, automobile casings, ships, refrigerators, solar reflectors, mobile phone casings, mechanical and electrical equipment, cosmetics, etc., and can also be used in power plants, chemical and petrochemical plants for anti-corrosion insulation. Curtain wall, bottle cap, kitchen utensils, luggage, clock accessories, metal stampings, lighting, signs, nameplates, craft gifts, metal cans, heat sinks, household appliances panels, decorative building materials, transportation facilities, Mp, mobile phone casings, elevators and automobiles Inside and outside the decoration industry! Technical Parameters Product grade: 1XXX / 3XXX / 5XXX / 6XXX Thicknessï¼?mm: 0.1 ~ 5 Diameterï¼?mm: 100 ~ 1500 Hardness: O H12 H14 H16 H18 H24 etc. Surface treatment: Cold rolling hot rolling Our purpose Integrity-based, quality first. Customer satisfaction is our pursuit! If you have any questions, please feel free to call us.
This manual will assist you in installing, using and maintaining your flow meter. It is your responsibility to make sure that all operators have access to adequate instructions about safe operating and maintenance procedure. Operating Principle: Liquid flows through the turbine housing causing an internal rotor to spin. As the rotor spins, an electrical signal is generated in the pickup coil. This signal is converted into engineering units (liters, cubic meters, gallons etc.) on the local display where is applicable. Optional accessory modules can be used to export the signal to other equipment. Upon receipt, examine your meter for visible damage. The turbine is a precision measuring instrument and should be handled carefully. Remove the protective plugs and caps for a thorough inspection. If any items are damaged or missing, contact us. Make sure the turbine flow model meets your specific needs. For your future reference, it might be useful to record this information on nameplate in the manual in case it becomes unreadable on the turbine. Refer to the nameplate for your customized products specification. . Cautions for Installation turbine type flow meter 4.1 Mounting Positions â?¢ Pipes must be fully filled with liquids. It is essential that pipes remain fully filled at all times, otherwise flow rate indications may be affected and measurement errors may be caused Avoid Air Bubbles. If air bubbles enter a measurement pipe, flow rate indications may be affected and measurement errors may be caused Avoid all pipe locations where the flow is pulsating, such as in the outlet side of piston or diaphragm pumps. Avoid locations near equipment producing electrical interference such as electric motors, transformers, variable frequency, etc.
GDVA-404 Portable current transformer voltage transformer CT PT analyzer Tests for Current Transformer: 1. Excitation curve and parameters test 2. Turns ratio test 3. Ratio and phase error test 4. Polarity mark check 5. Winding resistance measurement 6. Secondary loop burden measurement 7. Error line curve test for protection CT 8. Transient CT parameters test 9. CT nameplate guess 10. Saturation hysteresis loop curve measurement Tests for Potential Transformer: 1. Turns ratio test 2. Ratio error and phase angle error test 3. Polarity test 4. Secondary burden test 5. Winding resistance test Applications of CT/ PT Analyzer: 1. CT nameplate check 2. CT parameters check in work burden 3. CT transient parameters analysis 4. CT ratio and phase error calibration 5. PT routine test Main specification: 1. Test standards: IEC60044-1, IEC60044-6, GB1208, GB16847, C57.13 2. Power supply: AC220V±10%,50Hz/60Hz±10% 3. Power output: 0.1~125V (AC) 4. Current output: 0.001~5A(RMS) 5. Power output:300VA 6. Maximum knee voltage measurement:45kv 7. Current measurement: Range:0~10A (automatically change range in 0.1/0.4/2/10A) Error
