Sphere Shaped Nickel Plated Magnets ; Size: OD 5mm :216 Pieces ; Features: Max operating temp : 80°C ; Grade: N35 ; Coating: Nickel -Ni; Directions of Magnetization :Top - North Pole / Bottom - South Pole and Thickness Magnetized. Nickel Coated Magnets have many industrial, educational and household uses.It is best to Nickel coated for long-term maximum energy output and usage. These Magnets are highly resistance against demagnetization.
Feature: -Max operating temp 80°C -Grade: N35 -Coating: Nickel -Ni -Directions of Magnetization :Top - North Pole / Bottom - South Pole and Thickness Magnetized. Nickel Coated Magnets have many industrial, educational and household uses .It is best to Nickel coated for long-term maximum energy output and usage. These Magnets are highly resistance against demagnetization.
Feature: -Max operating temp 80°C -Grade: N35 -Coating: Nickel -Ni -Directions of Magnetization :Top - North Pole / Bottom - South Pole and Thickness Magnetized. Nickel Coated Magnets have many industrial, educational and household uses. It is best to Nickel coated for long-term maximum energy output and usage. These Magnets are highly resistance against demagnetization.
Ferrite magnets are made of a composite of iron oxide and barium or strontium carbonate.These materials are readily available at a lower cost than other types of materials used in permanent magnets making it desirable due to the lower cost. Ceramic magnets have a good balance of magnetic strength, resistance to demagnetizing and economy. They are the most widely used magnets today.
Neodymium magnets, rare earth magnets, bar magnet, ring magnet, ferrite magnet, ndfeb magnet, alnico magnet, disc magnet, smco magnets, rectangular magnet, n52 grade magnet, segment magnet, multi pole magnet, n35 grade magnet, y30 magnet, ferrite slab, n45 grade magnet, rare earth magnet ring, neodymium magnets bar, neodymium magnets block, rare earth magnets large, rare earth magnet bar, neodymium magnets strong, ferrite magnet ring, rare earth magnet disc, neodymium magnets arc, alnico magnet bar, rare earth magnet block, ferrite magnet blocks, large neodymium magnets, large rare earth magnets, strong neodymium magnets, super strong neodymium magnets, strong rare earth magnets, large ring magnet, ring neodymium magnets, wholesale neodymium magnets, super strong rare earth magnets, strong bar magnet, arc neodymium magnets, disc neodymium magnets, large bar magnet, custom made neodymium magnets, arc segment magnet.
An effortless, perfect tee for everyday wear. 4.3-ounce, 100% combed ring spun cotton, 32 singles 1x1 rib knit neck Shoulder to shoulder taping Please note: This product is transitioning from woven labels to tear-away labels. Your order may contain a combination of both labels.
Meivalve is a professional valve spare parts supplier and manufacturer that specializes in providing wholesale valve parts at competitive prices. Our extensive product catalog includes API 6A valve seat seals, peek seal rings, valve stem packing for FC gate valves, hammer union seals, valve stem U-packing seals, ring joint gaskets, and more. Our products are designed for the oil and gas industry, and we pride ourselves on delivering high-quality equipment and accessories to meet industry standards. With our commitment to quality and customer satisfaction, Meivalve is the go-to source for all your valve spare parts needs.
MAX DETECTION DEPTH: Metals:120mm; Non-ferrous Metals(Copper): 100mm; AC Wire: 50mm; Single-strand copper wire: 40mm; Wooden 2 modes choices: Precision mode:20mm; Depth mode:38mm AUTOMATIC RING DOWNï¼?After 5 minutes ofinactivity; POWER SUPPLY: 300mAh rechargeable lithium battery Tpye-C Charging PRODUCT SIZE 138*68*22mm PRODUCT WEIGHT 122g PACKAGE SIZE 203*98*45.5mm
A favorite year after year, these polos are known for their exceptional range of colors, styles and sizes. The soft pique knit is shrink-resistant and easy to care for, so your group will always look its best. 7-ounce, 100% ring spun combed cotton heavyweight pique Garment washed for softness Flat knit collar and cuffs Horn-tone buttons Side vents
A favorite year after year, these polos are known for their exceptional range of colors, styles and sizes. The soft pique knit is shrink-resistant and easy to care for, so your group will always look its best. 7-ounce, 100% ring spun combed cotton heavyweight pique Garment washed for softness Flat knit collar and cuffs Horn-tone buttons Side vents
These clothing are made from 70% Rayon from Bamboo and 30% Organic Cotton Ring Spun Fleece. They are pre-washed and pre-shrunk. These beautiful bamboo clothes are made in Canada. They come in various styles including crew neck, v neck, long sleeves- button ups well as different sizes and colors. Gorgeous hoodies is also available with
Details More options Material 100% polyester 100%cotton, T/C, 100%polyester, leather... Size 58cm 52cm-56cm for kids, 58cm-62cm for adults Panel multi- panel 5,6,7,8 Visor Regular Common, cover, sandwich, piping Structure Structure Structured or unstructured Logo Custom Embroidery, printing, applique, leather, woven label Back closure plastic Magic tape, plastic, metal, ring brass buckle Sweatband Cotton Cotton, polyester, T/C Inner seam taping Cotton Cotton, polyester, T/C PRODUCE YOUR OWN QUALITY MASKS
Details More options Material 100% polyester 100%cotton, T/C, 100%polyester, leather... Size 58cm 52cm-56cm for kids, 58cm-62cm for adults Panel multi- panel 5,6,7,8 Visor Regular Common, cover, sandwich, piping Structure Structure Structured or unstructured Logo Custom Embroidery, printing, applique, leather, woven label Back closure plastic Magic tape, plastic, metal, ring brass buckle Sweatband Cotton Cotton, polyester, T/C Inner seam taping Cotton Cotton, polyester, T/C
technical specifications Material: Tantalum. Chemical Composition: Tantalum (Ta)= 34,7 % Niobium (Nb)= 12,5 % Titanium Dioxide (TiO2)= 0,88 % Tungsten(W) = 10,8 % Vanadium (V)= 11,2 % Hafnium (Hf) = 12,5% Product Presentation: Mesh 200 Product Packaging: Double ring drum. Min Purchase Order: 26 MT (metric tons). It fits in 1 Container. Max Purchase Order: 1200 MT per month with production increases. The business model shall initially be tested with a 26 MT purchase order (PO). Thereafter, the quantity could be increased as demanded. For large POs, a face-to-face meeting is a requirement. Stock availability: The product is ready for shipping. Place of delivery: FOB - Santa Marta, Colombia. Method of payment: The payment is made by trust, escrow or letter of credit which becomes effective at the time of mineral verification and before its movement to another destination. Cost: USD $73 / kg
Tubing Head Tubing head is a vital component in the oil and gas industry, enabling the safe and efficient production of hydrocarbons from underground reservoirs. It provides a secure connection for production tubing, controls wellbore pressure, and helps maintain the integrity of the wellhead system. Description The Tubing Head is an adapter between the first casing column and the blowout preventer set (during drilling) or wellhead (after completion). The adapter can be threaded or welded to the casing and can have flanged or clamped connections to match the blowout preventer set or wellhead. It is the primary interface for pressure control equipment. At the time of installation, the casing head is usually tested for very stringent pressure and leakage parameters prior to the installation of any surface equipment to ensure viability under blowout conditions. Characteristics The tubing head and tubing cross are used to suspend the tubing and seal the annular space of tubing. Its characteristics are: 1. The secondary sealing form between the tubing hanging and the reducer flange includes O-ring seal, greased BT seal and metal-to-metal seal; 2. The sealing forms of tubing hanging and tubing head are metal-metal seal, special synthetic rubber seal or metal seal + special synthetic rubber seal; 3. With grease injection port and sealed test port; 4. The lower sealing form of the tubing head includes O-ring seal, greased BT seal and metal seal; 5. The tubing hanging and tubing head reducer flange can directly pass through the cable and can be equipped with a downhole safety valve control pipeline interface; 6.The side exit link is threaded or wire-flange type, and is equipped with VR thread for easy valve replacement operation.
Description Pup Joint, also referred to as Riser Spool, or Surface Riser Spool is a pressure-containing piece of equipment having end connections, used below or between drill-through equipment. The Spacer spool is a wellhead section that has no provision for suspension of tubular members and which may have no provision for sealing of tubular members. It is used to provide separation between two components with equal-sized end connections. providing exceptional performance as a wellhead extension, securing connection for choke manifold and kill manifold. Features A. Flanged, studded, and rubbed ends are available in any combination. B. We can produce a spacer spool for any combination of size and pressure ratings. C. Integral forged material ensures excellent reliable working performance. D. spacer spools are designed to minimize length while allowing sufficient clearance for wrenches or clamps unless otherwise specified by the customers. E. The standard Spacer Spools do not include outlets, although outlets can be added as per request. F. Our spacer spool is suitable for general working conditions and sour service. G. Stainless Steel 316L or Inconel 625 corrosion-resistant alloy ring grooves are also available. H.Normally we will provide tap-end studs and nuts with studded-end connections.
Characteristics of digestion vessels inside microwave digestion system: 1. Material selection: TFM (or PFA), low blank value 2. No recycled materials are added to the product to ensure purity 3. Suitable for use with microwave digestion instruments of various brands and models 4. The price of the same product quality is one-half to one-third of the original factory 5. Various types of microwave digestion tanks can be processed according to customer requirements Our factory has its own advantages: 1. Our factory can process raw materials without adding recycled materials, ensuring a very low background 2. For microwave digestion vessels of various models, as long as you need to drive acid later, we can help you match acid-driving electric heating plates of different sizes, which greatly saves you the trouble of multiple consultations, and the matching purchase is more cost-effective 3. Any part we process can match the original factory Any part we process can match the original factory, and the price is better than the original factory 1. Suitable for Italian Milestone ETHOS outer lining 34199 2. Suitable for Italian Milestone ETHOS digestion tank 33806 3. Suitable for Milestone ETHOS digestion tank cover 35140 5. Suitable for Milestone ETHOS main control spring 050184 6. Suitable for Milestone ETHOS main control gasket 050183 7. Suitable for Milestone ETHOS ceramic sleeve (including sealing ring) 055135 8. Suitable for Milestone ETHOS main control bracket 45191T 9. Suitable for Milestone ETHOS sealing screw 055139 Our factory can customize the vessels that are suitable for microwave digestion systems of various manufacturers as follows: Adapt to American CEM, Milestone, Anton Paar, Jena, Shanghai Sineo, etc.
The check valve is a kind of one-way valve, which relies on the pressure of the medium to realize the metal seal between the spool and the valve body, the greater the medium pressure, the better the sealing performance. Product Description The check valve is a kind of one-way valve, which relies on the pressure of the medium to realize the metal seal between the spool and the valve body, the greater the medium pressure, the better the sealing performance. The check valve design and manufacture of APImeivalve fully meet the requirements of API spec 6A and can be used interchangeably with equipment conforming to API spec 6A. The valve body is made of alloy steel forging, with strong mechanical properties, and can withstand high pressure, with safe and reliable performance. The bonnet and valve body are bolted together, and the seal is the sealing ring on the bonnet and the inner wall of the valve body. The sealing performance is reliable. It provides minimal assembly clearance between the bonnet and body (designed to be 0), thereby reducing erosion of bolts and holes by corrosive media and reducing bolt loads. Hard alloy is hard-faced on the core and sealing surface of the valve body so that it has good wear resistance and corrosion resistance. The core material should use sulfur-proof steel, and other parts should use the method of limiting hardness so that the valve can be used in an environment containing H2S. Install the valve body into the pipeline according to the flow direction on the valve body. The valve core by the upper and lower pressure to achieve movement and sealing so that the valve core can not be stuck. Technical Parameters 1. One-way flow of the working medium. 2. Working pressure: 2,000 psi ~ 20,000 psi 3. Nominal diameter: 2.1/16 "~ 4.1/16" (52mm ~ 103mm) 4. Working medium: oil, natural gas, mud, H2S and CO2 gas 5. Operating temperature: -46C ~ 121C (LU level) 6. Material level: AA, BB, CC, DD, EE, FF, HH 7. Specification level: PSL1 ~ 4 8. Performance level: PR1 ~ 2
Ball screw gate valves are designed for large caliber, high-pressure manual valves. The valve combines the tail balance lever and the unique ball principle to make its operation light, low torque, and easy to operate. Its diameters range from 3 1/16 "to 9" and its pressures range from 10,000 psi to 20,000 psi. Product features: 1. Two-way downstream sealing structure, which improves the service life; 2. Fixed metal seal (between gate and seat and seat and body); 3. Simple and reliable gate and seat design can reduce field service; 4. Sealing ring between seat and body helps seal at low pressure. They also prevent granular contaminants from entering the body chamber and sealing area; 5. Stem seal design covers all pressure classes, temperature ranges, and all fluid conditions encountered in wellhead and manifold environments; 6. Metal seal between bonnet and valve body, up to 20000psi working pressure; 7. Reverse stem seal structure allows the valve to replace stem seal under pressure drive; 8. To ensure safety, a grease injection device can be placed on the stem after the inverted seal. The device can be placed on the bonnet to eliminate body leakage; 9.Ball screws can effectively improve the switching efficiency and reduce the switching torque, which is more conducive to opening and closing the valve easily and quickly. For more information, please visit our website.
The check valve is a kind of one-way valve, which relies on the pressure of the medium to realize the metal seal between the spool and the valve body, the greater the medium pressure, the better the sealing performance. The check valve design and manufacture of APImeivalve fully meet the requirements of API spec 6A and can be used interchangeably with domestic and foreign equipment conforming to API spec 6A. The valve body is made of alloy steel forging, with strong mechanical properties, and can withstand high pressure, with safe and reliable performance. The bonnet and valve body are bolted together, and the seal is the sealing ring on the bonnet and the inner wall of the valve body. The sealing performance is reliable. It provides minimal assembly clearance between the bonnet and body (designed to be 0), thereby reducing erosion of bolts and holes by corrosive media and reducing bolt loads. Hard alloy is hard-faced on the core and sealing surface of the valve body so that it has good wear resistance and corrosion resistance. The core material should use sulfur-proof steel, and other parts should use the method of limiting hardness so that the valve can be used in an environment containing H2S. Install the valve body into the pipeline according to the flow direction on the valve body. The valve core by the upper and lower pressure to achieve movement and sealing so that the valve core can not be stuck. Technical Parameters 1. One-way flow of the working medium. 2. Working pressure: 2,000 psi 20,000 psi 3. Nominal diameter: 2.1/16 4.1/16 (52mm 103mm) 4. Working medium: oil, natural gas, mud, H2S and CO2 gas 5. Operating temperature: -46 C 121 C (LU level) 6. Material level: AA, BB, CC, DD, EE, FF, HH 7. Specification level: PSL1 4 8.Performance level: PR1 2
