Seal level: IP67 (1 meter underwater immersed for 1 hour) Shock resistance, vibration, anti-misplacement Insertion cable Suspension anti-electromagnetic interference protection No installation tools In addition, compared with other reinforced shell smaller and lighter; Signal attenuation; to prevent unauthorized tap and disconnect; support most of the network services; easy to engineer management and maintenance; highly resistant, including heat, humidity, dust and water interference; excellent expansion and application upgrade potential; 1. Rated current: 1.5A 2. Rated voltage: 125V 3. Insulation resistance: 500Ω 4. Contact resistance: 30MΩ 5. withstand voltage: AC 1000V RMS 50 Hz or 60 Hz 1 minute machine material 1. Housing: ABS resin (UL94V - 0) PBT (UL94V - 0 compliant) Nylon 66 (UL94V - 0 compliant) Nylon 46 (UL94V - 0 compliant) 2. Contact line: 0.45 m m diameter phosphor bronze gold plated, the thickness of 0.35, nickel-phosphorus bronze alloy Selective nickel plating 3. Shield: 0.20 - 0.25 mm thickness tin plated brass 4. Gold plated: 3U inch, 6U inch, 15U inch, 30U inch, 50U inch surroundings 1. Operating temperature: -40C to 70C Products are in line with SGS environmental requirements, quality assurance. Delivery is stable, please contact the Advisory 400-888-7082
LED Circuit Board Aluminum PCB White Aluminium PCB Aluminum PCB/Metal Core PCB/MCPCB/Insulated Metal Substrate(IMS) Insulated metal substrate (IMS consists of a metal baseplate (Aluminum is commonly used because of its low cost and density) covered by a thin layer of dielectric (usually an epoxy-based layer) and a layer of copper(35um to more than 200um thick). The FR-4 based dielectric is usually think (about 100um). Compared to a classical printed circuit board, the IMS/MCPCB provides a better heat dissipation. It is one of the simplest way to provide efficient cooling to surface mount components. Among all Metal core PCBs, Aluminum MCPCBs are the most common type-the base material consists of aluminum core with standard FR4. It features a thermal metal-clad layer that dissipates heat in a highly efficient manner, while cooling components and increasing the overall performance of the products. Currently, Aluminum-backed PCBs are regarded as the solution to high power and tight tolerance applications. MKTPCB has been offering Aluminum PCB manufacturing services for over ten years. Our full-feature Aluminum circuit boards making capabilities and value-added options including Free DFM Check allow you to get high-quality Aluminum PCBs done within budget. Aluminum PCB Metal Core PCB Materials and Thickness The metal core of the thermal PCB can be : 1) Aluminum (aluminum core PCB), 2) Copper (copper core PCB or a heavy copper PCB) or a mixture of special alloys, while the most common being Aluminum core PCB. The thickness of metal cores in PCB base plates is typically 30 mil - 125 mil, but thicker and thinner plates are also available. MCPCB copper foil thickness can be 1 - 10 oz. MKTPCB Aluminum PCB Capacity : MKTPCB can produce 1-Layer, 2-Layer, 4-Layer and 6-Layer Aluminum PCBs. Multilayer aluminum PCB is mainly used by high power Industrial products, like outdoor Led screens.
Deutz Spare Parts Deutz FL912 Piston Ring 1)size:100x3+2.5+2.5+5mm 2)material available: nodular iron, cast iron, steel, alloy, and etc( we can do as customer's request) 3)surface treatment: polishing, plating, nitridation, oxidation, phosphate coating, and etc (we can do as customer's request) 4)packing: plastic bag and white box(we can do according to per customers' requirements TP/RIK/NPR/KS/PC/SM/MAHLE/GOETZE/COFAP/TRW...) 5)product advantage: reduce fuel consumption, high heat stability, corrosion and wear resistant, adapts to high rotation speeds and high loads, meets the matching requirements of new models 6) Series available: Audi/VW, Mitsubishi, Mazda, Mercedes-Benz, BMW, Honda, Toyota ,Nissan, Hyundai, Kia, Cummins, Peugeot, Chelvrolet, Ford, Deutz, Volvo... We have developed more then 1000kinds piston rings and we could do as you required. We also produce water pumps. Welcome you contact for consulting, inquiry and order RFQ Q: Are you trading company or manufacturer ? A: We are manufacturer of piston rings and water pumps. Our factory was found in 1996 and our plant is 30000square meter, more than 200 workers, 20 technicians. Q: How long is your delivery time? A: Generally it is 3-7days if the goods are in stock. Or it is 7-30 days if the goods are not in stock, it is according to quantity. Q: Do you provide samples ? is it free or extra ? A: Yes, we could offer the sample for quality testing but not free. Q: How about the warranty? A:Â Usually Our Warranty is 12 month. Â Otherwise, if any quality problem, we accept money refund in 15 days.
This kind of metal laser engraving machine price specially fit for processing high reflective material such as brass ,red copper and galvanize sheet etc . Features: .High speed arc cutting with dual ball screws and dual-motor drive systems .High accuracy and stability with overall casting structure which effectively eliminate the vibration generated during high-speed cutting .Save cost by ensuring the accuracy and service life of the moving parts . The moving parts of metal laser engraving machine price can be lubricated automatically with the automatic concentrated lubrication function . .High-performance laser generator imported from Germany , Continuous cutting high reflecting material such as copper ,brass and galvanized sheet with high-precision .Improving cutting efficiency greatly with leapfrog function of cutting head ,parabolic motion between the cutting contours and automatic frog jump during switching contours. . .Crossbeam for metal laser engraving machine price scb2018ym are made through drawing and finishing process. Light weight , high rigidity , high dynamic performance . .Effectively reduce yellowing result from corner cutting by the following function of the power ,frequency and speed . Applicable materials Metal materials such as aluminum alloy , Galvanize sheet , Carbon steel , stainless steel , Brass , Red copper etc. Technical Parameter Maximum material size 600 x600 mm Laser power 500W-1000W Maximum speed 60m/min Positioning Accuracy ±0.03mm/1000mm Repeated accuracy ±0.01mm/100mm Model CMA0606D-G-B metal laser engraving machine price Work environment Temperature 0-45?? Humility?¤ 80%ï¼?clean, less dust Maximum accelerated speed 1.2(G) Supply voltage 380V/50Hz-60Hz Machine weight 2400Kg Dimension 2000mmx1680mmx2000mm
There are tin foils in many places in life, such as chewing gum, chocolates, and over-the-counter packaging. They all have a certain aluminum content, and recycling of these wastes will result in a lot of metal aluminum resources. Since aluminum and aluminum alloys have good ductility, their use in life is very broad. So how can these aluminum-plastic composites be completely separated into aluminum and plastic? Dongying Group gave a perfect answer - Aluminium-plastic separation equipment refers to equipment that completely separates aluminum-plastic composites into aluminum and plastic. The equipment is suitable for handling scrap and waste of various pharmaceutical factories, aluminum-plastic board factories, food and beverage factories and other aluminum foil packaging industries. For example, used bags, capsules, toothpaste, wow bottles. Aluminum plastic bags, candy bags, tea packaging, and decorative aluminum-plastic plates. The aluminum scraps can be smelted by the recycled aluminum foil in the equipment, which is the finest raw material for the silver powder factory, the fireworks factory, and the aluminum factory (trained into aluminum ingots); the PVC plastic can be pressed into pieces, and the tube can be used for packaging and conveying pipelines. Great potential. The main advantages of Dongying Group's aluminum-plastic separators are as follows: 1. Complete dry physical separation will not cause secondary environmental pollution. 2. The separation rate of aluminum plastic is as high as 99%, with good social and economic benefits.
This kind of metal laser engraving machine specially fit for processing high reflective material such as brass ,red copper and galvanize sheet etc . Features: .Improving cutting efficiency greatly with gantry double-drive structure and imported German rack & pinion transmission system . .Save cost by ensuring the accuracy and service life of the moving parts . The moving parts of metal laser engraving machine price can be lubricated automatically with the automatic concentrated lubrication function . .Close-loop laser cutting control system , auto focus , high-speed piercing and automatic tracing-edge function. . . Rapid response with gantry rack dual-driven system, reinforced welding body. The stress is eliminated by tempering and vibration aging to scb2018ym ensure that the metal laser engraving machine price deformation tolerance is within 0.02mm .High-performance cast aluminum guide rail , after finite element analysis , realizes highly accelerated speed circular arc cutting. Applicable materials Metal materials such as aluminum alloy , Galvanize sheet , Carbon steel , stainless steel , Brass , Red copper etc. Technical Parameter Maximum material size 2000 x4000 mm Laser power 1000W-4000W Maximum speed 120m/min Positioning Accuracy ±0.03mm/1000mm Repeated accuracy ±0.02mm/100mm Model CMA2040C-GH-B metal laser engraving machine price Work environment Temperature 0-45â?? Humilityâ?¤ 80%ï¼?clean, less dust Maximum accelerated speed 1.2(G) Supply voltage 220V/50Hz-60Hz Machine weight 12000Kg Dimension 10600mmx3470mmx1875mm
This kind of metal laser engraving machine price specially fit for processing high reflective material such as brass ,red copper and galvanize sheet etc . Features: .Improving cutting efficiency greatly with leapfrog function of cutting head ,parabolic motion between the cutting contours and automatic frog jump during switching contours. .Save cost by ensuring the accuracy and service life of the moving parts . The moving parts of metal laser engraving machine price can be lubricated automatically with the automatic concentrated lubrication function . .High-performance laser generator imported from Germany , Continuous cutting high reflecting material such as copper ,brass and galvanized sheet with high-precision . . Rapid response with gantry rack dual-driven system, reinforced welding body. The stress is eliminated by tempering and vibration aging to scb2018ym ensure that the metal laser engraving machine price deformation tolerance is within 0.02mm .Crossbeam for metal laser engraving machine price are made through drawing and finishing process. Light weight , high rigidity , high dynamic performance . Applicable materials Metal materials such as aluminum alloy , Galvanize sheet , Carbon steel , stainless steel , Brass , Red copper etc. Technical Parameter Maximum material size 3000 x1500 mm Laser power 500W-1000W Maximum speed 80m/min Positioning Accuracy ±0.03mm/1000mm Repeated accuracy ±0.02mm/100mm Model CMA1530C-G-E metal laser engraving machine price Work environment Temperature 0-45â?? Humilityâ?¤ 80%ï¼?clean, less dust Maximum accelerated speed 0.8(G) Supply voltage 220V/50Hz-60Hz Machine weight 4000Kg Dimension 5400mmx2200mmx2000mm
Description The Window & Door Safety Lock. According to the Royal Society for the Prevention of Accidents (RoSPA) an estimated 4000 children under the age of 15 are injured by falling out of windows each year. In order to prevent this from happening RoSPA recommend that there should be a means of limiting the opening of any window where the cill level is more than three meters above external ground level. Our security cable window restrictor offers you that peace of mind for a small investment and is suitable for use on all kinds of windows and doors including UPVC, aluminum, wooden and metal profiles. The 20cm long cable provides a 10cm opening as recommended by the RoSPA. This enables the windows to be opened enough to allow sufficient ventilation but not enough for someone to fall out. A key is also provided so that the restrictor can be locked as required and also so the window can be fully opened when necessary. This means that the restrictor can be used on fire escape windows providing the key is kept in easy reach of the window. The restrictor is ideal for homes, hotels, student accommodation etc. It also provides an added benefit of extra security, the restriction of how much the window can be opened prevents burglars from being able to use the window as an access point. These restrictors are very easy to install and comes with four steel screws for fitting. The restrictor consists of a zinc alloy body, a nickel plated pin and a steel wire rope which is 20cm long.
Description The Window & Door Safety Lock. According to the Royal Society for the Prevention of Accidents (RoSPA) an estimated 4000 children under the age of 15 are injured by falling out of windows each year. In order to prevent this from happening RoSPA recommend that there should be a means of limiting the opening of any window where the cill level is more than three meters above external ground level. Our security cable window restrictor offers you that peace of mind for a small investment and is suitable for use on all kinds of windows and doors including UPVC, aluminum, wooden and metal profiles. The 20cm long cable provides a 10cm opening as recommended by the RoSPA. This enables the windows to be opened enough to allow sufficient ventilation but not enough for someone to fall out. A key is also provided so that the restrictor can be locked as required and also so the window can be fully opened when necessary. This means that the restrictor can be used on fire escape windows providing the key is kept in easy reach of the window. The restrictor is ideal for homes, hotels, student accommodation etc. It also provides an added benefit of extra security, the restriction of how much the window can be opened prevents burglars from being able to use the window as an access point. These restrictors are very easy to install and comes with four steel screws for fitting. The restrictor consists of a zinc alloy body, a nickel plated pin and a steel wire rope which is 20cm long.
Fanso Global Limited (FG) copper cathodes are known for high purity and consistent quality. Our Copper cathodes are produced using the Mount ISA electro-refining process and are 99.99% copper purity levels that meets the international quality standards BS 6017 1981 (1989) and u-Cath-1 / ASTM B-115 (1999) and are registered as LME A Grade. They are high grade and have the lowest levels of various group and individual impurities. Fanso Global Limited (FG) Copper cathodes are used in the manufacture of continuous copper rods for the wire, cable and transformer industries, and copper tubes for consumer durable goods and other applications in the form of alloys and sheets. SPECIFICATION OF COPPER CATHODE Product: Copper Cathodes Grade A (Electrolytic Copper Grade) (LME standards) Standard Cu Cathode-1, purity 99.99% Dimension: 914mm x 914mm x 12mm (LME standards) Weight of each sheet: 125kgs (+/- 1%) Net weight of each pallet: 2mts (+/- 1%) Min. weight in each container: 20mts approx. Gross weight of each container: 22.20mts approx. Packing: palletized banded by aluminum bands 2. CHEMICAL COMPOSITION Copper (Cu) : min% 99.99% Other materials may be present which are described below: Oxygen O2 -- Sulfur S:.............................. 4 PPM Iron Fe:..............................2 PPM Silver(Argent) Ag::..............................10 PPM Lead Pb:..............................0.2 PPM Nickel Ni:..............................0.2 PPM Selenium Se:..............................0.3 PPM Antimony Sb:..............................0.1 PPM Silica Si:..............................0.3 PPM Cobalt Co:..............................0.2 PPM Arsenic As:..............................0.1 PPM Bismuth Bi:..............................0.1 PPM Manganese Mn:..............................0.1 PPM Tellurium Te:.............................. 0.05 PPM Aluminum Al:.............................. 0.5 PPM Magnesium Mg:.............................. 0.4 PPM Zinc Zn:.............................. 0.4 PPM -
Universal h6014/h6052/h6054 headlamp replacement5x7 6x7inch, hi 54w low 30w with white drl and amber turn signal light, the headlight applicate for jeep, gmc vehicle, isuzu, mazda, honda, mitsubishi, hyundai, mercedes-benz, mercury, light, medium and heavy-duty trucks, classic cars. Features: Power:hi 54 watt /l 30w Leds:3w cree* 18pcs Lumen:theoretical 5400 lumen Voltage:dc 10-30v Color temperature:6000k Beam:hi low beam in one with drl & amber turn signal Housing:die-cast aluminum alloy Background color: black Lens:pc Mounting bracket: h4 plug Waterproof rate:ip67 Lifespan:above 50, 000 hours Warranty:one year limited Oem&odm:available Designed packing:available Application: Fits all 5x7inch or 7x6inch rectangular sealed beam headlight 1. For 1987-1995 jeep wrangler yj 2. For 1984-2001 jeep cherokee xj 3. For 1986-1992 jeep comanche mj 4. For 1980-1994 patrol y60 5. For 1988-1990 dodge ramcharger 6. For 1990-1993 dodge ram pickup 7. For 1990-1993 dodge w250 8. For 1986-1993 dodge van 9. For 1985-1987 chevy silverado 10.For toyota pickup, toyota mr2, toyota celica, toyota supra, nissan 240sx, Vehicles, jeeps, motorcycle h6054 h5054 h6054ll 69822 6052 6053 h6014.
Nickel metals, products is a distribution center Located in houston, texas. It was Primarily founded for the sole purpose of providing alloys to the oil and Gas, metals, chemical, and pharmaceutical industries at a very competitive Price. The company accomplishes this goal by purchasing directly from the Mill and passing down the savings to the customer. .We do business all over the world with registered documents of Operation, we belong in the usa stock market, we are the fastest and Reliable, purity: 99.9% min grade: grade nickel metals int crystal, copper mine Product type: Crystal image, natural copper mine stone Regional feature: Huston texas Place of origin:africa(senegal, south africa, cameroon) Brand name: Nickel metals :copper mine Item Description 1.Material 100% natural rock crystal 2.Color Mixed color 3.Size 12cm/10cm 4.Weight 210g depending on customers order 5.Moq 1 Metric tone 6.Deliver time 1)sample order:3days after receipt of payment 2)bulk order:7-15days after receipt of payment 7.Payment 1)l/c;t/t;paypal;west union; moneygram etc 2)sample order:100% payment before shipment 3)bulk order:50% deposit balance before shipment 8.Packaging 1) bubble paper inside and hard corrugated box or wooden case outside 2) according to customers' requirement
1.The high-rigidity, high-accuracy and high-stability rack 1)base and y axis are made by integrated design?x axis uses the high-hardness aluminium alloy and is suppressed into shape by a molding machine. 2)x axis is completed at one time by a large special equipment. Every parts and installation planes of base and y axis are assembled exactly to ensure high precision. 3)fast assembling to avoid deformation. 2.High-speed, high-precision and long-life x/y axis 1)rolling guides used on x/y axis are imported from japanese brand thk, which has low noise and high precision. 2)the linear motors used on x/y axis are made by japanese company sanyo, which is exclusively used in pick&&place machine. 3)the grating ruler with high resolution is imported from britain company renishaw, which ensures the high precision of x/y axis motion. 3.The high-speed and high-precision head 1)the parts and base of head are made by aviation-grade aluminum, which makes the head more stable and reliable. 2)adapting japanese micro servo motor and iko guide rail, which ensures the up-down of z axis in high-speed, high-accuracy, and high stability. 3)high-precision ball spline ensures the high-accuracy of rotation. 4.The recognition camera with excellent performance 1)using germany basler linear scan camera. 2)the ring-shaped light source is made by osram lamp beads that has highlight and high-stability, and lighting comes from its base and 8 sides. 6.Electric feeder with high stability and high speed 1)complete menu: the size of electric feeder can be from 8mm to 72mm, tube feeder and tray feeder. 2)the feeding speed is in the advanced stage of industry with 20pcs per second. 3)unique technology of current controllers was employed in machine drives, which ensures the extremely low heating level of electronic feeder.
Specifications Op 2.1 duplex service drop Applications To supply 120 volt aerial service for temporary service at construction sites, outdoor or street lighting. For service at 600 volts or lower at a conductor temperature of 75 maximum. 2.2 triplex service drop Applications To supply power from the ulility`s lines to the consumer`s weatherhead. For service at 600 volts or less(phase to phase ) at a conductor temperature of 75 maximum for pe insulation or 90 maximum for xlpe insulation. 2.3 quadruplex service drop Applications To supply 3 phase power, from a pole-mounted transformer to the use`s servic head where connection to the service entance cable is made. To be used at voltages of 600 volts or less phase to phase and at conductor temperature not to exceed 75 for pe insulated conductors or 90 for xlpe insulated conductors. Conductor standards: 1. B-230 aluminum wire, 1350-h19 for electrical purposes. 2. B-231 aluminum conductors, concentric-lay-stranded. 3. B-232 aluminum conductors, concentric-lay-stranded, coated steel reinforced (acsr). 4. B-399 concentric-lay_stranded 6201-t81 aluminum alloy conductors. 5. B498 zinc-coated steel core wire for aluminum conductors, steel reinforced (acsr). 6. Duplex service drop cable meets or exceeds all applicable requirements of ansi/icea s-76-474
This kind of metal laser engraving machine specially fit for processing high reflective material such as brass ,red copper and galvanize sheet etc . Applicable materials Metal materials such as Carbon steel , stainless steel , aluminum alloy , Galvanize sheet , Brass , Red copper etc. Features: . Rapid response with gantry rack dual-driven system, reinforced welding body. The stress is eliminated by tempering and vibration aging to scb2018ym ensure that the metal laser engraving machine deformation tolerance is within 0.02mm .High-performance laser generator imported from Germany , Continuous cutting high reflecting material such as copper ,brass and galvanized sheet with high-precision . .Crossbeam for metal laser engraving machine are made through drawing and finishing process. Light weight , high rigidity , high dynamic performance . .Improving cutting efficiency greatly with leapfrog function of cutting head ,parabolic motion between the cutting contours and automatic frog jump during switching contours. .Save cost by ensuring the accuracy and service life of the moving parts . The moving parts of metal laser engraving machine can be lubricated automatically with the automatic concentrated lubrication function . Technical Parameter Maximum material size3000 x1500 mm Laser power500W-1000W Maximum speed80m/min Positioning Accuracy±0.03mm/1000mm Repeated accuracy±0.02mm/100mm ModelCMA1530C-G-E metal laser engraving machine Work environmentTemperature 0-45 Humilityâ?¤ 80%ï¼?clean, less dust Maximum accelerated speed0.8(G) Supply voltage220V/50Hz-60Hz Machine weight4000Kg Dimension5400mmx2200mmx2000mm -
Needle Punching Machine Nonwoven Needle Punching Machine Middle-speed Needle-punching machine Features:Needle punch machine suitable for normal nonwoven geotextile production, such as needle punched cotton, shoe material, geotextile felt, etc.High speed counter needle punching machine is used for production of high-density and high-performance nonwovens such as PU leather substrate, top lining for automobile and filtering materials 1Model�GMZ-360M 2Dimension of M/C�L3600W1400H2025(mm) 3Weight�6100kg 4Total power�12.35kw 5Main motor�7.5KW; 3 phase AC power 50Hz/ 6Product density50g/-85 0g/(depend on the raw material type also product requirements and No of units) 7The average output�360kg/hour(Working at width 2500mm&300g/under running normal) 8ProtectionMain motor overload protection 9The control mode�Constant power & Inverter control 10Working width�2800mm/adjustable/cut at mid/product width more than 2500mm 11�Needle plate�Galvanized-faced ; with 3500holes/ 12Bearing�KOYO/Or according to the customer's requirements 13Type of holes�Diameter1.83mm/An inverted cone 14Electrical components�SIEMENS 15Inverter�ZhengTai 16Fabric speed Recycled material or man-made fiber material or mixing material 17Fabric speed0.5-11m/min(depend on the raw material type also product requirements) 18Trip of needle�40 mm 19Transfer roller�Diameter:168mm/ Chromium plating process/high quality 50# steel 20Needle plate High strength alloys and shock shape /totally 18 mm thickness 21The main shaft & other work shaft Diameter: 80mm/ Dynamic balance and strength strengthening heat treatment/high quality steel 22Print Color Grey 23The control cabinet and panel Digital display instrument, and equipped with knob regulator, professional electric schematic diagram 24NoteDirectionThe round-trip distance of the needle can be adaptive adjustment according to the thickness of the raw materials.
Features Permanent current up to 1000 A, 5KVA Max current output up to 1100A. Built-in digital ammeter 0.5% accuracy. Built-in digital timer resolution 1 ms (Optional). Made up of two units, control and power unit Thermal and short-circuit protection. With 6m length 1000A heavy current test cable With contact Applications TEST-901 primary current injection test set adopts ARM Chip to control its output process and large capacity of toroidal transformers. It is equipped with LCD display and current meter; it can show primary current value, second current value, turn ratio and the action time. Packing is used as aluminum alloy body with PC panel. TEST-901 is mainly applied to CT turn ratio testing in the power system and contact resistance test which need large current. Circuit Breaker Test Current Transformer Test Resistance Test Power Transformer Test Primary current injection test TEST-901 primary current injection test system is a necessary equipment in all walks of life in electrical commissioning needs large current place, used in power plants, substations, electrical manufacturers and scientific research, laboratory and other units, belonging to short-term or intermittent working system, It has a small size, light weight, good performance, easy to use and maintenance features.
Product Introduction Ring die pellet machine is specially designed for mass industrial production of wood pellets.It is a full set of mechanized production equipment. It can convert biomass raw material and solid waste into energy fuel with high density.wood pellet mill is suitable for various kinds of materials whose moisture content is less than 15%.The machine is fully automatic electric heating, and can adjust the humidity of materials to deal with problems of congestion and not forming. Raw material Raw materials from a wide range of eucalyptus, pine, fruit trees and other wood waste, wheat, soybean meal, corn, rice husk and other crop straw, sawdust, sawdust and other materials. Working principle When the ring-die pellet machine is in operation, the material rotates into the material cavity through the feeding port, and the centrifugal force causes the material to continuously circularly move and adhere to the inner wall of the stamper to form a uniform annular material layer, Constantly rotate the extrusion, making it forced into the ring hole in the molding, and continue to squeeze outwards, gradually by the dial to promote the particles out of the discharge port. Advantage 1. Die legislation, vertical frequency feed, to prevent uneven feeding. 2. The host drive using high-precision gear drive to enhance the wear resistance of gear, particle machine running more smoothly. 3. Double mold, a variety of aperture to meet user requirements of various granulation. 4. Spindle and Siamese hollow shaft made of high quality alloy steel, a substantial increase in wear resistance. 5. Particle molding system bearings are used high-quality silent bearings, longer service life, safer operation. 6 .Automatic timing oil lubrication system to ensure adequate lubrication bearings, more safe and reliable operation.
This kind of laser metal cutting machine specially fit for processing high reflective material such as brass ,red copper and galvanize sheet etc . Applicable materials Metal materials such as Carbon steel , stainless steel , aluminum alloy , Galvanize sheet , Brass , Red copper etc. Features: . Rapid response with gantry rack dual-driven system, reinforced welding body. The stress is eliminated by tempering and vibration aging to ensure that the machine deformation tolerance is within 0.02mm .High-performance laser generator imported from Germany , Continuous cutting high reflecting material such as copper ,brass and galvanized sheet with high-precision . .Crossbeam are made through drawing and finishing process. Light weight , high rigidity , high dynamic performance . .Improving cutting efficiency greatly with leapfrog function of cutting head ,parabolic motion between the cutting contours and automatic frog jump during switching contours. .Save cost by ensuring the accuracy and service life of the moving parts . The moving parts can be lubricated automatically with the automatic concentrated lubrication function . Technical Parameter Maximum material size3000 x1500 mm Laser power500W-1000W Maximum speed80m/min Positioning Accuracy,±0.03mm/1000mm Repeated accuracy,±0.02mm/100mm ModelCMA1530C-G-E Work environmentTemperature 0-45, Humility,?¤ 80%,clean, less dust Maximum accelerated speed0.8(G) Supply voltage220V/50Hz-60Hz Machine weight4000Kg Dimension5400mmx2200mmx2000mm
Applications The rotary steam retorts are well suitable for all kinds of high-viscosity products packaged with thermal resistant materials. 1. Plastic container: Plastic bowl or cup; 2. Metal container: tin can. Features of Steam Retorts 1.Low noise of the water rain retorts, creating a quiet and comfortable working environment; 2.The inside rotating body is made by using one-time molding process in machining center after being welded and assembled. The concentricity of axis and rotating body during rotation is controlled within ideal range; 3.The supporting rollers adopt antifriction bearing structure, boasting small rolling friction and long service life; 4.The transmission system incorporates a reduction box with braking function and an automatic positioning system, ensuring the crate guide rail of the rotating body stays horizontal with trolley guide rail and other guide rails of matched equipment after rotation stops; 5.The crate compaction system utilizes cylinder automatic and respective compaction. All the cylinders are made of alloy, avoiding many disadvantages such as inaccurate spring return of rotating crate cylinder, cylinder deformation and air leakage, etc; 6.The reduction box base is integrated into the rotary steam retort, successfully avoiding a series of problems resulting from concentricity change of transmission shaft brought by deformation of reduction box base and retort body; 7.The rotating speed is governed by frequency converter so that rotating speed can be adjusted anytime depending on product viscosity to avoid delamination and precipitate; 8.The whole sterilization process adopts PLC fully automatic linearity control. Via the PLC control, the temperature difference of thermal distribution is limited within �. The autoclave sterilizers allow for multi-stage heating, effectively saving energy. It also has an a dditional F value recorder (optional), capable of storing 100 scheduled processes.
