Railway gap ruler for rail gap measurement Rail Feeler Gauge 0.02 mm, 0.03 mm, 0.05 mm, ,0.25 mm, 0.30 mm, 0.35 mm ,0.40 mm,0.45 mm, 0.50 mm, 0.55 mm ,0.6 mm ,0.7 mm , 0.75 mm, 0.8 mm,0.85 mm ,0.9 mm, 0.95 mm,1.00 mm. Steel ruler -2~17.5 cm Gap ruler 5-30 m m
nqg-5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m -75kg/m . The quality of cutting section meets the requirement of railway industrial standards. It is a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc.
power AC 110 / 220V 50 60 HZ motor AC220V 750W Control Striping and crimping, or just crimping operation Foot switch Size 4000 L�?550 W�?550 H mm weight 85 Kgs Press Press force 2 å?¨ Stroke 30 mm Stripping Wire size UL 1007 AWG 16~32 Striping length 2~6 m/m
power AC 110 / 220V 50 60 HZ motor AC220V 750W Control Striping and crimping, or just crimping operation Foot switch Size 4000 LÃ??550 WÃ??550 H mm weight 85 Kgs Press Press force 2 Stroke 30 mm Stripping Wire size UL 1007 AWG 16~32 Striping length 2~6 m/m
Model SJIC38P BK SJIC38P C SJIC38P M SJIC38P Y OEM Model SJIC38P-BK(T44E1) SJIC38P-C(T44E2) SJIC38P-M(T44E3) SJIC38P-Y(T44E4) Color : Black/Cyan/Magenta/Yellow Ink Type : Pigment Chip : 100% Compatible chips For Use In CW-C6030A/CW-C6030P/ CW-C6530A/CW-C6530
Model OEM Model Color Ink Type NE-SJIC36BK(PG) SJIC36P(K) BK Pigment NE-SJIC36C(PG) SJIC36P(C) C Pigment NE-SJIC36M(PG) SJIC36P(M) M Pigment NE-SJIC36Y(PG) SJIC36P(Y) Y Pigment For Use In: Epson ColorWorks CW-C6030A/C6030P/C6530A/C6530P
NQG 5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m 75kg/m . The quality of cutting section meets the requirement of railway industrial standards. It's a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc.
Hi, From the previously volume of 200 m gallons in Rotterdam, we still have 100 m stored in our tanks. D6 Fob rotterdam Port Offer Available on our FOB-DP-TTT procedure for USD 1, 12 per gallon net to the buyer! Need Genuine Buyer to move forward Thanks Kumar
Commodity: Ultra pure and ultra fine copper powder (UPC) not radioactive End Use: Aerospace industry and Medical industry, Composition (isotopes): 63Cu 69.1% +/- 0.05% and 65Cu 30.9 % Â +/- 0.05% High purity: 99.9998 % Particle size (granulometry): from 2 m to 10 m. Minimum order quantity: 500 kg Origin: Non-criminal and Non-Sanctioned Country Packaging: under Argon 2 kg bottles Location: Germany Availability: Currently available
Black Pepper GL 530* Appearance = Pass Color = Pass Odor = Pass MC = 12.77% FM = 0.26% Fungi = 0 Density = 530.12 gr/L Light berries = 10.75% Country of Origin: Lampung & Bengkulu, Indonesia Total Amount Available: 25 M/T Minimum Order Quantity: 1 M/T *GL at 530 due to higher light berries content. Actual GL could be 550 and above.
A mixture of concrete-raw materials which practically packaged in red bag as a solution for pouring areas that are difficult to reached by truck mixers, such as projects in remote areas, the completion of building rooftops, and to build home kitchen. To produce 1 m3 concrete, require 43 bags of Beton Instan�®. K250: for foundation, slab, beam,or column on 1-3 storeys building. (This guidance is flexible and can be adjusted refer to your design plan) > PRODUCT DETAILS - Prices shown are per 1 set (contains 20 bags) and varied by region - Minimum order 1 set - 1 m3 = 43 bags of Beton Instan - Mix with water 4-5 liters per bag > HOW TO CALCULATE VOLUME Beton Instan volume = Length (m) x Width (m) x Height or Thickness (m) x 43 bags E.g; Pouring area P (4 m), L (1 m), T (10 cm) Beton Instan Volume = 4 m x 1 m x 0.1 m x 43 bags = 17.2 bags (rounded to 18 bags) > HOW TO ORDER 1. MUST TO contact the admin to confirm the avalability of product and delivery schedule before ordering 2. Select the strength and area according to your needs and project location 3. Input the required volume then complete your transaction 4. After the order received by Jayamix by SCG, concrete will be processed and delivered refer to the agreed schedule. > SPECIFICATIONS Brand: Jayamix by SCG Function: Pouring Material: Cement, Split, Sand, Admixture Product Dimension: 50 x 70 x 15 cm per zak Weight: 50 kg per bag
Chlorinated rubber paint for boats is a long-lasting ship bottom antifouling paint formulated with chlorinated rubber, plasticizer as the base material, cuprous oxide as poisonous material and exudation aid. Chlorinated rubber antifouling paint can prevent marine attached organisms from fouling the bottom of the ship and keep the bottom of the ship clean. The paint dries quickly, is easy to apply, and has good seawater impact resistance. Chlorinated rubber boat paint is suitable for marine facilities such as ship bottoms, docks, and offshore drilling platforms to prevent marine attached organisms from fouling for a long time. Advantages of Chlorinated Rubber Antifouling Paint For Ships Long-term antifouling coatings. Effectively protect ship bottom against marine growths such as barnacle, oyster, bryozoans and algae. Quick dry in a low temperature, high durability in ordinary fouling conditions and good workability. Excellent compatibility with chlorinated rubber primer Specification of Chlorinated Rubber Antifouling Paints for Ships Type Solvent Solid Content 75% Mixing Ratio One component Dry Film Thickness 75�¼m per coat Specific Gravity 1.7kgs/Liter Coverage Rate (Theoretical) 0.21kg/m2/75�¼m  0.129L/m2/75�¼m  Drying Time Temperature 10â?? 20â?? 30â?? Dry to touch 40mins 30mins 20mins Dry Hard 6hrs 5hrs 4hrs Package 20kgs bucket What is the service life of the chlorinated marine paint for rubber? Antifouling paints have been the most effective and also a widely employed method for preventing fouling of underwater portion of ships. These paints are applied over anticorrosive coatings to remain in contact with seawater. The antifouling paints contain toxic material(s) which are constantly released from the surface of the film into the seawater at a controlled rate inhibiting the growth of fouling organisms. Chlorinated rubber paint formulations utilize cuprous oxide as the main toxic agent. It prevents fouling for periods of about 15-18 months even in Indian waters where fouling is more intense and occurs throughout the year. Now the chlorinated rubber paint price is reasonable, anything you need, please contact us. As a paints factory, we will do our best to meet all the needs of customers.
T2 Inclined Moving Walk GRACES is outstanding for is beaulful appearance and superior performance. The specially designed combs and escalator structure ensure the entire escalator more firm and anti-slip. Features Of T2 Inclined Moving Walk The diversilied specification of GRACES not only offers for various malls but also used for railway station, airport and subway with public heawy duty characters. GRACES (ravelator/moving walk) is designed for heavy taffic areas which incduded the airport, metro station and subway. It features a space-saving, environmentally sound design. The T2 Inclined Moving Walk features a robust and durable construction, ensuring long-lasting performance and reliability. Its advanced engineering design allows high load-bearing capacity to ensure continuous transportation of passengers. In addition, the moving walkway is equipped with more than 30 safety features to provide passengers with a safe and comfortable experience. The product is intelligently designed with attention to aesthetics and functionality. It has a sleek and modern appearance, blending seamlessly with the surrounding architecture. The moving walk is also energy-efficient, contributing to sustainable and eco-friendly transportation solutions. IFE Elevator's T2 Inclined Travelator is a public transportation solution designed to increase mobility and convenience on different floors. Its durability, safety features, aesthetic appeal, and energy efficiency make it a reliable choice for those in need of inclined transportation systems. Specification Of T2 Inclined Moving Walk Specification T2 Lifting height range/m 1.5H9.5 Use segment length/m 50 Tilt angle/° 40494 Nominal width/mm 800/1000 Nominal speed/m/s 0.5 Applicable environment Indoors The type of work Normal type Handrail structure Vertical armrests Drag method Y-/VVVF Startup mode Standard single speed Standard self-starting Frequency conversion low speed Frequency conversion self-starting Number of horizontal steps as standard H6m -- H>6m -- Pedal depth/mm as standard 266.67 Additional brakes H6m No H>6m Yes Truss deflection 1/750 Safety factor for moving parts 5 Now the price of passenger escalator is reasonable, if you want to buy new escalator, please contact us. As an elevators company, we can provide kinds of elevators and escalators for sale, anything you need, please leave us a message.
Never used machine. Feed capacity: approx. 35 t/h Grain size: Raw material: 0-150 �¼m Circulation material: 0-150 mm Bulk density: 1.0-1.2 g/cm2 Free moisture: 0-0.5% Temperature: 120 °C Product: Briquette > 10 mm 25 t/h fine < 10 mm approx. 10 t/h Device parameters: Roll diameter: 1000 mm Roll body width: 930 mm Maximum load: 7200 kN Rolling speed: 0.42 m/s Press: 400 kW Hydraulic system: 3 kW Roller presses are used for pressing or briquetting various types of coal, minerals, ores and mixtures with binders. In order to achieve sufficient breaking strength by pressing or briquetting, products with low surface moisture are suitable for handling. Depending on the input material and the final product, roller presses can be equipped with optional functions. The material fed into the screw is a mixture of gypsum hemihydrate and gypsum dihydrate. The arrow screw lifts the material and pushes it into the area between the two rollers. Briquettes are created by pressing the material in the gap between the cylinders. A certain part of the material leaves the press through the gaps of the trough forms. The subsequent screening process is performed with a 10 mm cut. Adapting the press to the overall system as part of the trial run is extremely important to deliver a product that meets quality requirements. Interruption of the briquetting process due to a lack of material leads to disruption of the material flow as well as excessive stress on the roller press. The technical description of control and regulation of the roller press, including accessories, is part of the specification of the independent energy and control system supplier.
Never used machine. Feed capacity: approx. 35 t/h Grain size: Raw material: 0-150 �¼m Circulation material: 0-150 mm Bulk density: 1.0-1.2 g/cm2 Free moisture: 0-0.5% Temperature: 120 �°C Product: Briquette > 10 mm 25 t/h fine < 10 mm approx. 10 t/h Device parameters: Roll diameter: 1000 mm Roll body width: 930 mm Maximum load: 7200 kN Rolling speed: 0.42 m/s Press: 400 kW Hydraulic system: 3 kW Roller presses are used for pressing or briquetting various types of coal, minerals, ores and mixtures with binders. In order to achieve sufficient breaking strength by pressing or briquetting, products with low surface moisture are suitable for handling. Depending on the input material and the final product, roller presses can be equipped with optional functions. The material fed into the screw is a mixture of gypsum hemihydrate and gypsum dihydrate. The arrow screw lifts the material and pushes it into the area between the two rollers. Briquettes are created by pressing the material in the gap between the cylinders. A certain part of the material leaves the press through the gaps of the trough forms. The subsequent screening process is performed with a 10 mm cut. Adapting the press to the overall system as part of the trial run is extremely important to deliver a product that meets quality requirements. Interruption of the briquetting process due to a lack of material leads to disruption of the material flow as well as excessive stress on the roller press. The technical description of control and regulation of the roller press, including accessories, is part of the specification of the independent energy and control system supplier.
Technical Parameters: Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2180 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2200 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Features : Multi Color & Multi Material Capability High quality printing with 7 m Lidar Resolution Upgradeable and customizable flexibility High speed CoreXY with 20000 mm/s Acceleration Dual Auto Bed Leveling What to Expect from the X1-Carbon 3D Printer 20 m/s�² acceleration Micro lidar assisted bed leveling Active vibration compensation for better print quality Spaghetti failure detection and auto-pause Print resume after power outage Advanced materials empower advanced projects. Bambu Lab X1 Carbon, equipped with extra cooling and a hardened nozzle and drive gear, unlocks a wider selection of materials, including PA, PC, PET, and TPU, and specializes in carbon fiber and glass fiber reinforced polymers. Colors & Beyond With Bambu Lab Automatic Material System (AMS)ï¼?you can now enjoy printing freely in multiple colors and materials. Vibration Compensation & Extrusion Compensation The active vibration compensation (XY) algorithm and extrusion compensation guarantees extra smoothness and gets you good prints. Dual Auto Bed Leveling Dual Auto Bed Leveling system checks for increased reliability.The lidar and analog force sensors crosscheck for an extra layer of redundancy in bed leveling. Al inspected first layer Tired of waiting out that first layer? The lidar sensor can check your first layer so that you can get back to doing...anything else.
Our VKOILL company offers the best quality, best price and operation for fresh Carrot . FOB HCM, Vietnam port or CIF/ CFR your ports PRODUCT: Ogoo Carrot Fresh * GRADE: 1 * ORIGIN: Vietnam * BRAND: Ogoo; Vkoill; OEM your private brand * PACKING: - 4.5kg/ box - 10kg /box * SIZE: - S: 70-150g /pc - M: 150-220g /pc - L: 220-250g /pc - 2L: 250-350g /pc - 3L: 350-450g /pc * LOADING: - 40RF/ 20RF - With pallet/ wt pallet * INCOTERMS: FOB/ CIF/ CFR * DELIVERY: Around 10 days since deposit * CAPACITY: 20 containers per week VKOILL is a leading grower and exporter, supplying high quality fruits and vegetables from Vietnam to worldwide market. Our "Ogoo" brand stands for consistent quality, safety and long-lasting customer relationships. Our Vietnamese Ogoo fruits are with naturally active enegry, creating fruitful days and breakthrough in life for our consumers. * FEATURES - Fresh carrots from Vietnam are valued for their vibrant color, crisp texture, sweet flavor, and nutritional value like rich in essential nutrients. - The flesh is crisp and crunchy, offering a satisfying bite. - Planting in Vietnam, fresh carrots have a sweet and earthy flavor, with hints of natural sweetness that intensify with cooking. -------
ATLAS-WT3 Freight Elevators ln the elevator car, fixed limit devices are installed on the left and right sides of the floor, and retractable limit devicesare installed near the front door to prevent the car from scratching to the elevator. Features Of ATLAS-WT3 Commercial Freight Elevators Automobile Limiting Device In Car. Landing Floor Call Elevator Device. Specification Of ATLAS-WT3 Freight IFE Elevators NO. Specification ATLAS-WT3 1 Capacity (kg) 2000 2500 3000 2 Speed (m/s) 0.5 1 0.5 1 0.5 1 3 Operation System full collective selection operation 4 Driving System VVVF 5 Door Operator System VVVF 6 Traction Machine Permanent Magnet Synchronous Gearless type 7 Control System CTRL80 8 Car Dimension mm 1800Ã??2300 2000Ã??2500 2300Ã??2500 width*depth 9 Shaft Size mm 3000Ã??2700 3300Ã??2900 3600Ã??2900 W*H As one of escalator and elevator companies, we will do our best to meet all the needs of customers.
