Silicone Coated Paper Suppliers and Manufacturers

Capacity: 2.5Oz, 4Oz, 5Oz, 6Oz, 7Oz, 8Oz, 10Oz, 12Oz & 16Oz. Type: Single wall, Double Wall, Rippled

GLPOLY thermal gap pad is applied in military equipment of 2019 National Day Parade. Why can GLPOLY stand out from competition and be applied in military equipment of 2019 National Day Parade? We are not boasting and flaut ourself, actually we had received certificate of merit from department concerned. The market is deluged with thermal gap pads, common customers can not distinguish high performance thermal pad from bad ones, because they dont have a special equipment to test and verify what the manufacturers marked. Many peers said that they can produce thermal gap pad with 15.0W/mK or 17.0W/mK of thermal conductivity, most of them falsified. We do not want to belittle peers, but after we tested their product, we got fake information often. one is falsification thermal conductivity, the other one is hgih thermal resistance. Bad performance causes distrust of customer in domestics brand. GLPOLY sticks to principle of integrity, we show customer what it is. The raw materials are imported from Germany and Japan, in order to enhance thermal performance, secondary processing will be proceeded by nanoscale grinder. It will reduce the particle size and increase specific surface area to decrease thermal resistance and improve thermal performance. No one else do it like this. Customer requested 5.0W/mK of thermal conductivity at least, when we learned application, we recommended thermal gap pads with 5.0W/mK and 6.0W/mK. Customer satisfied with parameters, but they prefered to test by themselves.

GLPOLY XK-G30 is high performance, low thermal impedance thermal gel with thermal conductivity of 3.0W/mK, it is ideal for AI equipment. Some suppliers marked for AI product thermal managementon specification and deceived customers with fake data, unfortunately, long-term reliability test will tell the truth. IDRIVERPLUS, a famous service robot company, the engineer consulted us about thermal management materials for autonomous sweeping vehicle. He stated definitelyfirstly, thermal conductivity is 3.0W/mK or greater, secondly, 10-year service life. Most of suppliers failed to satisfy these two requirements. But to GLPOLY, these were not barriers any more, we were not bragging, we showed customer the test of object. GLPOLY intrduced automated production lines, eliminating artificial error and keeping product consistent. It is cartridge package desiged for automated dispensing production, decreasing time consuming hand assembly, reducing labor cost and improving productivity. GLPOLY takes Bergquist, Chomerics Therm-A-GAP GEL30 and Laird Tflex 508 as benchmark, providing quality product and design flexibility.

Usual Specification: W 75% min, C 0.2% max, Si 1.0% max, S 0.04% max, P 0.04% max, Mn 0.5% max, Cu 0.15% max, As 0.1% max, Sn 0.08% max, Mo 0.5% max, Sb 0.05% max, Ni 0.005% max, Co 0.005% max

For medical equipment such as ventilators. Thermal insulation pad XK-P20 offers a high reliable performance, produced by IATF16949 certified factory. (1) More than 20% profit can grow, because using GLPOLY thermal gap pad. (2) Market share will increase 20% , from purchasing the high stability quality product made by GLPOLY (3) What GLPOLY can provide, no second in China. GLPOLY recommends XK-P20, which can service the thermal structure inside medical equipment, such as the MRI, CT, ventilator etc. GLPOLY thermal gap pad with thermal conductivity of 2.0 ~ 3.0 w/m �· k is satisfied, which have been supplied to more than 10 medical equipment companies, exported abroad. In the domestic material market, are mixed up with good and inferior quality. So which brand can be trusted, that must the one that hold some experience in medical electronics. GLPOLY is one of these trusted brands In the face of the unprecedented shortage of medical devices, the export of products made in China also needs quality certification. GLPOLYs thermal insulation materials have RoHS report and UL. For urgent medical needs, we will give priority to produce and delivery and provide the best quality. Beijing Wandong Medical Co., Ltd. is a customer we have been cooperating with for many years, they make MRI and CT devices. GLPOLY provides them with thermal gap filler pad XK-P20S, thermal conductivity 2.0 w/m �· k, thickness of 0.7 mm required by the drawing, breakdown voltage measured to be greater than 10KV. In addition, increasing the tensile strength of the material and control the silicone oil content. Medical equipment have very strict quality control, but compared with well-known brands such as Hankel, 3M, Fujipoly, Customer Wandong Medical chose GLPOLY. In fact, If know more the details of GLPOLY brand, can find our 70% of our products are used in new energy vehicles, so: (1) The factory has already obtained the certifactions of IATF16949, ISO14001 and OHSAS180001, and its quality control has been higher than most peers. (2) XK-P20 thermal insulation pad with many years of product experience in medical electronics, so that no quality defection (3) Passed SGS test. Comply with export standards (4) The service life is as long as 10 years. The operating temperature is -50~220flammability level is UL94 V-0 To sum up, what GLPOLY can provide is good quality, high performance thermal management materials for export.

It is not easy to find a alternative to Laird Tflex 900 in local Chinese market in the past. It changed a lot in recent years. At least, GLPOLY XK-P80 is able to compete with top class brand such as Laird, Bergquist, Fujipoly or 3M. Many manufacturers said that their thermal materials are alternative to top class products as mentioned above, but if you test the objects, you can always find some probems, parameters mismatched. For instance, some manufacturers made the thermal conductivity of 8.0W/mK, which is as high as Laird Tflex900â??s, but the hardness is beyond expectation, it is detrimental to heat transfer. GLPOLY can provide a excellent alternative to Laird Tflex900, no matter thermal properties or physical properties. Here is a case. One millimater wave radar manufacturer consulted with us about high performance thermal gap pad which is used for replacing Laird Tflex900. Some properties must be consistent with that of Laird Tflex900. We recommended GLPOLY XK-P80 to customer. This thermal pad is a high thermal performance, electrical insulation and highly conformable gap filling material with a thermal conductivity of 8.0W/mK. I can imagine that customer will doubt the performance of this thermal gap pad, but test will exhibit detail. Test resulteds showed that both GLPOLY XK-P80 and Laird Tflex900 provided a thermal conductivity of 8.0W/mK, but XK-P80â??s thermal impedance 0.13â??in2/W which is much lower than Laird Tflex900â??s. This really surprised customer, â??This is only local product that meet our requirements I had tested.â?? GLPOLY has been providing thermal gap pad and thermal gap filler for some car manufacturers, help resolving problems of battery pack and ECU thermal management, such as NIO GAC etc. GLPOLY is able to provide complete portfolio of thermal management materials including thermal gap pad, two component thermal gap filler, one-part thermal gel, (thermal

(1) More than 20% profit can grow, because using GLPOLY thermal gap pad. (2) Market share will increase 20% , from purchasing the high stability quality product made by GLPOLY (3) What GLPOLY can provide, no second in China. XK-G30 is a necessary material for the thermal conductive structure of service robots, drone and other AI smart technique. However, not all thermal conductivity gel can definitely be used in AI technology. It should be a veritable performance of thermal conductivity, also has a reliable service life, that can be used more than 8years. GLPOLY is one of the few thermal materials manufacturers that can really meet the needs of high-end applications. IDRIVERPLUS, a well-known service robot design company in China, found GLPOLY when they were designing the unmanned cleaner. Their requirements are very clear, thermal conductivity >3.0 w/m �· k, with a service life of more than 10 years, also reach the flammability UL94 V-0. These three indicators can actually brush off many similar products, because once doing the reliability testing, these similar product will not have an excellent test result like GLPOLY. 5 pipes of XK-G30 samples were soon delivered to Beijing, for a month-long technical examination, meanwhile, GLPOLY also did aging testing and silicone oil bleed out testing in its own testing room. As expected, XK-G30 satisfied the requirement, and received the "Adoption". The advantage of GLPOLY XK-G30: (1) As a conventional product of thermal conductivity gel, never solidify, low density and low thermal impedance, much better than normal thermal grease (2) Producing by automatic line, ensures product consistency. (3) 55ml/300ml Tube package, suitable for customerâ??s automatic dispensing, reduce cost the hand operation. (4) Thermal conductivity 3.2 w/m k, not lower than 3.0 w/m k.

Although technologies over electrical vehicle has been developed for years, we still dont have a perfect thermal management solution over electrical vehicle battery pack. Besides the reasons of battery pack structure, I think thermal interface materials has a great impact on thermal management. The market of thermal gap filler(thermally conductive adhesive) looks very chaotic, many thermal gap filler was called thermal adhesive for structure bond, actually, they are still thermal silicone encapsulant in essence. Moreover, some engineers dont know thermal materials very well and state requirements unclear, resulting a unsatified trial and failed impression on domestic brand. Many manufacturers only concerned to thermal conductivity and laid less attention on other parameters, such as curing time, curing status, bond strength, maintaince. GLPOLY thermal gap filler (thermally conductive adhesive) XK-D25H is epoxy based, high performance and good electrical insulation thermal adhesive which had been improved from traditional epoxy adhesive. Mix ratio is 1:1 by volume, just a few of manufacturers can accomplish it, for example, 3M thermally conductive epoxy adhesive mix ratio is 2:1. It is truth that data can be checked out from website. GLPOLY thermally conductive adhesive (thermal gap filler) XK-D25H features 1) short curing time, draft in 5 minutes and become steady in 12 hours, 2) semi rigid after curing, protect battery modules by dampening vibration, 3) Improved bond strength greater than 3.7Mpa, 4) mix ratio 1:1 by volume, fit for dispensing equipment. One of battery customers tested and compared materials among five suppliers, they checked thermal conductivity, electrical insulation, curing time and bond strength and so on. Two of suppliers were eliminated because of longer curing time that it is unfavourable for process. In the high temperature aging test, GLPOLY thermally conductive adhesive (thermal gap filler) XK-D25H performed normally, the variety of parameters are less than 10%. The competing one failed because of week bond strength, and moreover, its mix ratio is 2:1 which is unfavourable for customers robot system. Besides stable thermal performance, GLPOLY thermally conductive adhesive provides reliable physical ptoperties. 1)filling gaps under low pressure, 2) low stress, 3) strong structure bond. GLPOLY thermal materials has been applied in military equipment because of high performance and reliable properties. Thermal gap filler is on trial in battery pack in four major enterprises. GLPOLY thermal materials help you keep you devices cool and well performed.

Putty soft fast silicone impression material , 2x400 grams , Made in Germany CE&ISO Based on Additional vinyl silicon Setting time in patient mouth 1:30 minutes Excellent Tear strength High Elastic recovery 99.89% Shade Violet Suitable for Single or Sandwitch impression technique

Feature ?neutral, one-component, room temperature curing silicone sealants used in construction, non-corrosive to most building materials Outstanding uv and weathering resistance Good working time Suitable for most of construction materials Main purpose: 1 all kinds of doors and windows, glazing seal; 2 kinds of building materials, aluminum, steel, stone, tile and other adhesive seal; 3 indoor decorative glass adhesive seal. Construction summary: 1 you must use a solvent such as toluene or acetone, the interface must be clean and keep clean; 2 in the need to protect the site affix tape, but do not touch the tape will be the construction of the Surface; 3 before sealant cured, timely trimming, in order to achieve a beautiful look. Application restrictions: 1 can not be used as a structural adhesive. 2 long-buried interfaces and long-term immersion occasions unfit for use. 3 greasy materials unfit for use. 4 after the sealant has not cured prior to construction, not completely closed isolated from the air.

For semiconductor, photoelectric applications. Bazzel

For semiconductor, photoelectric applications. Bazzel

For semiconductor, photoelectric applications. Bazzel

Silica fume Analysisresult 900 (%)920 (%)940 (%)970 (%) Sio289.0292.0994.896.77 K2o1.321.120.630.26 Na2o0.520.420.350.29 Ph value8.187.786.607.10 Loi 750f¦1.801.600.900.80 Moisture content (when bagged) 0.41 0.400.430.41 Coarse particles:·+45 micron 64.732.6 Specific surface area (b.E.T.)1 8 m2/g19 m2/g19 m2/g19 m2/g Bulk density(kg/m3) 200~350 (900u)200~350 (920u)200~350 (940u) 500~600 (900d)500~600 (920d)200~350 (940u) 800kg/jumbo bag, 20'fcl contains 16 tons.

Urja Peelable Coating Or Strippable Coating