ND-1 portable tamper is a special machine for ballast tamping on railway lines and turmouts. Choose high-vibration, high-power gasoline engine as power, with high output power and stable. performance. The air compression hammer impact pick is used to impact the ballat. The impact force is large and the tamping effect is good. The whole machin is smal in size, ight. in. weight, and convenient. to go up and down, which can ffectively guarantee driving safety during operation. Specification Model ND-1 Type Rail Tamper Material Stainless Steel Dimensions (L x W x H) (mm) 840*470*350 mm Engine Two- stroke petrol engine,1.6kW Rated RPM 4400 r.p.m Impact energy 30~40 J Impact frequency 22 Hz Fuel tank volume 0.95 L Weight 25 kg
YCD-2 hydraulic tumout tamping machine is a special mainenance mechanical equipment for railway turmouts. it is mainly used for tamping the seeper bllast in the tumout section, and can also take into account the tamping efect of the main track bed ballast. Specification Model YCD-2 Type Rail Tamping Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1420*660*1380mm Engine HONDA GX390 petrol engine Power 6.6 kW Vibrating frequency 60~70 Hz Exciting force 34kN Clamping force 9.4 kN Insertion force 2.9 kN Working pressure 5.0 MPa Tamping insertion depth: 90~ 120mm under sleepers Weight 337 kg
NCM-5.1 frog and switch grinding machine is specifically designed for grinding operations through switch and crossings and either side of the rail head. The rail grinding device of the machine can be tilted by 30�° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The frog and switch grinding machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. NCM-5.1 Engine Honda GX270 Petrol engine Power supply 5.1kw Spindle revolution â?¥3900r/min Grinding stone inclination 30 Grinding stone feeding stroke 80mm Grinding stone feeding accuracy 1mm Weight 117KG
Code: SWC 3011 Material: 100% cotton OR Polyester and Cotton blend SIZE: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL Colour: Navy Blue, Royal Blue, Light Blue, Petrol Blue, Tan, Red, Orange, Green, Bottle Green, Dark Grey, White. Description: Flat coat collar One flap pocket on left side of chest Pen pocket on left sleeve â?? Two flap pockets on the lower side of shirt Two trouser pockets Elasticized waist on trousers Hanger loop on collar Reflective tapes on arms, legs and over the chest/shoulder. Piping done on collars and pockets. Adjustable cuffs and ankle openings. Bartacking done in places where more strength is needed to support extra load.
Code: SWC 3005 Material: 100% Cotton OR Polyester and Cotton blend SIZE: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL Colour: Navy Blue, Royal Blue, Light Blue, Petrol Blue, Tan, Red, Orange, Green, Bottle Green, Dark Grey, White. Flat coat collar Two cut pockets on chest with concealed heavy duty industrialgrade (brass/Nylon) zip fastening. Two patch pockets on back Two-way concealed heavy duty industrial grade (brass/nylon) zip fastening. Pen pocket on left sleeve Elasticized back Side vents Adjustable cuffs and ankle openings. Bartacking done in places where more strength is needed to support extra load.
Code: SC 1103 Material: 100% Cotton OR Cotton & Polyester Blend. SIZE: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL Colour: Navy Blue, Royal Blue, Light Blue, Petrol Blue, Tan, Red, Orange, Green, Bottle Green, Dark Grey, White. Description: Flat coat collar Two flap chest pockets with snap buttons. Two patch pockets on back Two-way concealed heavy duty industrial grade (brass/nylon) zip fastening. Pen pocket on left sleeve Elasticized back Hanger loop on collar Two trouser pockets Adjustable cuffs and ankle openings. Bartacking done in places where more strength is needed to support extra load.
Rovan Baja 5TS 360 injection car shell 36CC petrol carScale 1:51, Displacement 36cc four bolt engine(with NGK and walbro carb.1107),single cylinder,two stroke,air-cooled2,LxWxH:817x480x255mm3,Tread:395mm(F)/400mm®4,Wheelbase(F/R):570mm5,Rear wheel drive6,Rear shaft Brake7,18KG full metal gear throttle servo8,55KG metal gear steering servo9,dominator pipe (Gen.2)10, Metal diff. gear set11,Gen.3 knobby tyres set with Gen.4 wheel hubs and nylon beadlocks12,CNC 8mm metal absorber13,SC6V4500 Battery14,RC4G 2.4G 4 channel controller with LCD screen15,8000RMP new clutch kit16,High strength nylon front&rear suspension set17,New ratio can18,Front & rear lean prevention set 199MM half shaft19,Alu.metal clutch tripod21,metal roll cage22,New symmetric steering kit23,Attached with service kit bag24,New incorporated Hex.clutch bell kits25,CNC front absorber supporting tower(also fit for 5T or 5SC truck)26,CNC alloy F&R thicker board27,CNC alloy rear absorber brace rod28,CNC alloy rear shock support and bar set29,new anti-leaking fuel tankScale 1:51,Displacement 45cc four bolt engine(with NGK and walbro carb.1107),single cylinder,two stroke,air-cooled2,LxWxH:817x480x255mm3,Tread:395mm(F)/400mm®4,Wheelbase(F/R):570mm5,Rear wheel drive6,Rear shaft Brake7,20KG full metal gear throttle servo with CNC servo arm8,65KG metal gear steering servo with CNC servo arm9double exhaust pipe with muffler( including metal rear bumper)10, Metal diff. gear set11,full terrain tyres set with nylon beadlocks12,CNC 8mm metal absorber137.4V-5C 4200amh battery14,RC4G 2.4G 4 channel controller with LCD screen15,8000RMP new clutch kit16,Front & rear lean prevention set 17new strengthen 9mm half shaft18,Alu.metal clutch tripod19 metal roll cage20,New symmetric steering kit with CNC alloy drag link21,Attached with service kit bag22,New ratio can23,New incorporated Hex.clutch bell kits24,CNC alloy front & rear suspension arm set25,CNC front absorber supporting tower(also fit for 5T or 5SC truck)26,CNC alloy F&R thicker board27,CNC alloy rear absorber brace rod28,CNC alloy rear shock support and bar set29,CNC alloy ball connector30,CNC alloy rear wheel bearing carrier31,Rear LED light with CNC alloy rear foundation32,Front LED light33,new anti-leaking fuel tank34,Metal sealed wheet nutsThe 5TS360 is a combination of the Baja5T and SC essences. It also absorbs the LT's roll cage and the car casing, making the roll cage and the car body of the whole car one-piece, making it easier to assemble and disassemble.The front of the car has a huge front elevation buffer cover, and the lamp can be fitted with LED bead
Selling gas oil Heavy origin iran FOB, CIF
Selling Crude oil stock origin iran From China FOB, CIF
Selling naphtha From UAE Along with the analysis file Seller from UAE
Product Description Magnetic Rail Versine Measuring Kits is also called string box for railway curve measurement. It is a necessary tool for railway works construction. Curve positive vector measuring box is a regular work in rail line maintenance. In order to facilitate the work of the workeProduct Description NQG5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc. Specification Model NQG-5.1 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 800*560*500mm Engine GX270 petrol engine 5.1KW Specification of cutting disc �?400*�?32 *4mm Cutting disc no. of revolutions 3320 r/min Linear speed of cutting disc 70m/s Cutting accuracy Verticality0. 4mm, flatness0.3mm Cutting time 2 min ( cut off 60kg/m rail) Weight 50kgr to complete this job, a new line curve positive vector measuring box has been development. Feature Curve versine measuring box is a fine production, it is portable, pocket, and good looking. The box body resistant ABS material for yellow, and easy to operate. Specification Model ZSH-50 Type Versine Measuring Device Material Plastic Dimensions (L x W x H) (mm) 133*66*26mm Measuring Range 50m Weight 210kg
Oil and Fuel Absorbent Socks absorb oil, fuel, diesel, petrol and other hydrocarbons whilst repelling water at the same time. These 7.6cm x 3.6m booms are used to contain, divert and absorb spills. Oil and fuel absorbents are made from meltblown polypropylene and are colour-coded white for easy identification. These absorbents are able to absorb up to 20 times their own weight in oil and have a fast-wicking action to clean up spills quickly. Oil and fuel absorbents are hydrophobic, which means they repel water. This makes them ideal for cleaning up oil and fuel spills in wet environments, including ponds, sumps, drains, lakes, rivers, creeks or in the rain. Features: Constructed in a Tube Shape Capable of Bending Attracts and Absorbs Oil (Oleophilic) Resists and Repels Water (Hydrophobic) Benefits: Flexible Low Liquid Leakage Can be Used in Many Applications Absorbs both Light and Heavy Oil Contains Oil without Getting Bogged Down by Water Typical Oil Spill Applications: Oil Control in Ports and Marinas Around the World Helps Contain and Absorb Small or Large Oil Spills Bent to Surround Leaky Equipment On Boat Decks, Shops, and other Industrial Locations ITEM CODE:JXY-OASK101,102,103 Dimension:7.6cm x 1.2m,7.6cm x 2.4m,7.6cm x 3.6m Qty Per Bale:20pcs per bale, 12pcs per bale,8pcs per bale
Being a well-distinguished company in the market, we are into offering Virgin Base Oil SN 500. Base oils are used to manufacture products including lubricating greases, motor oil and metal processing fluids. Different products require different compositions and properties in the oil. One of the most important factors is the liquid's viscosity at various temperatures. Whether or not a crude oil is suitable to be made into a base oil is determined by the concentration of base oil molecules as well as how easily these can be extracted. Base oil is produced by means of refining crude oil. This means that the crude oil is heated in order that various distillates can be separated from one another. During the heating process, light and heavy hydrocarbons are separated - the light ones can be refined to make petrol and other fuels, while the heavier ones are suitable for bitumen and base oils.[1] There are large numbers of crude oils all around the world that are used to produce base oils. The most common one is a type of paraffinic crude oil, although there are also naphthenic crude oils that create products with better solubility and very good properties at low temperatures. By using hydrogenation technology, in which sulfur and aromatics are removed using hydrogen under high pressure, you can obtain extremely pure base oils, which are suitable when quality requirements are particularly stringent.[2] Chemical substances - additives - are added to the base oil in order to meet the quality requirements for the end products in terms of, for example, friction and cleaning properties. Certain types of motor oils contain more than twenty percent additives
Product Details of Catalytic Converter Exhaust Manifold for Nissan Altima1.High precious metal load and high technology washcoat for premium performance.2.Stainless steel construction, ,internal substrate material and precious metal loading have been carefully engineered for maximum efficiency and to avoid "MIL" code issues that are common with lower quality products.3.Federal Emissions compliant design.4.EPA Approved;5.TWG products are covered by 25,000-miles catalytic performance & 50,000-miles structural integrity warranty.Catalytic Converter Exhaust Manifold for Nissan AltimaCatalytic converters are usually used with internal combustion engines fueled by either petrol (gasoline) or diesel.Manufacturer Part Number: 674-659 , RI19590Interchange Part Number:40810, 641169, 1195,NIS2527, NIS2534Fits the following vehicles:Fitment2002 2003 2004 nissan altima Base Sedan 4-Door/S Sedan 4-Door/SL Sedan 4-Door 2.5L2002 2003 2004 2005 Nissan Sentra SE-R Spec V Sedan 4-D/SE-R Sedan 4-Door 2.5L2003 Nissan Sentra Limited Edition Sedan 4-Door 2.5L2004 Nissan Sentra S Sedan 4-Door/LE Sedan 4-Door 2.5LFeature of Direct Fit Catalytic Converter for Wrangler 4.0LCeramic catalyst cores are typically wrapped in mounting mats made of ceramic fibers and packaged into steel housings. Specially developed materials and technologies allow the design and construction of extremely durable catalytic converters. A number of converter canning technologies were developed, including clamshell, tourniquet and stuffing. In each of the technologies, the converter shell geometry has to provide the required mounting density for the mat. The design of converter inlet and outlet headers or cones affects the gas flow distribution and pressure drop. In applications with space limitations, catalysts can be placed inside catalytic mufflers.Workshop
NCM-5.1 Rail Switch Grinding Machine NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head. Specification Model NCM-5.1 Type Rail Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 2100*1120*1030mm Engine Honda GX270 Petrol engine Rated power 5.1kW Grinding wheel speed 3600r/min Grinding wheel feeding stroke 80mm Feed adjustment accuracy l0mm Grinding wheel rotation angle 30° Weight 117kg
NLB - 600 type internal combustion bolt wrench is suitable for railway line sleeper bolt and nut of unscrew and fastening operation. This machine is double sleeve and homework, reverse torque large in 600 n m., can unscrew various corrosion bolt, the working efficiency is high. At the same time change impact torque for static torque, make the operation of rail fastener pressure error is small; Reversing agile, centralized control, convenient operation, it is a lot of multifarious pine, bolt operation indispensable necessary equipment. Parameter Parameter Of NLB-600 railway maintenance rail bolt wrench with petrol engine model NLB-600 the gasoline engine type engine the gasoline engine power rating 4.5KW the engine speed 3600 r/min sleeve quantity 2 sleeve center distance 214 + 0.5 mm tightening torque adjustable 80-170 (N, m) maximum unscrew torque > 600 n, m factory tightening torque 125 N, m work efficiency
Product Description NGM-6.3 Digital Control Profiling Rail Grinder NGM-6.3 Digital control profiling rail grinder , with petrol engine . Mainly used for the restoration and grinding of welded joints, calendering burrs, rail surface repair, waveform wear, etc. in the maintenance and construction of railway rails. BENIFITS 1.Gasoline driven, strong adaptability to an open working environment. 2.The feeding of the grinding controlled by the electric, high polishing precision. 3.Following copying, easy operation. Specification Supporting power imported GX270 gasoline engine (6.3kW / 3600rpm) MCU running speed 16 MIPS LCD display resolution 128 64 DOTS Timer real-time display resolution hour, minute and second Timer cumulative display resolution hours Timer output resolution year, month, day, hour, minute Magneto output voltage ~ 12V External charging power supply ~ 220 V Grinding wheel stroke 59 mm Profiling track 1010 mm Deflection angle of profiling �± 90 �° Grinding wheel inching feed accuracy 0.01 ~ 0.5 mm (real-time setting) Working environment temperature - 20 ~ + 70 Overall dimension of main engine (length* wide* Height) 1565 550 973 (mm) Weight 99 kg
Product Description NGYM-I Rail Waist Grinding Machine Rail waist grinding machine is suitable for grinding works before railway laying, subway maintenance welding and gluing insulated joints construction. This work is one of the heavy workload jobs in the rail welding operation. In the past, it was mainly carried out by hand-held electric grinder or angle grinder, it has led to high labor intensity, low operation efficiency and slow working speed, poor grinding surface quality, serious environmental pollution etc. The rail waist grinding machine is suitable for 50kg/m-75kg/mrails. Specification Model NGYM-I Material Stainless Steel Dimensions (L x W x H) (mm) 1120*430 *780mm Engine petrol engine Max output power 4.0kw/3600rpm Grinding wheel spindle speed 3600rpm Grinding wheel diameter �¦ 100-230mm Grinding wheel size 2-124*106*34.5/18 G-A20 P 7B-45m/s Machine weight 57kg
Product Description Lithium battery powered Rail bolt wrench machine (model: LJ-LDB171X) is composed of host, control system, battery system and rail traveling part. The utility model has the advantages of compact structure, light weight, flexible assembly and disassembly, convenient use and no exhaust emission. It can be transported separately, which is convenient for single person to carry on site. The weight of the separated part is less than 15kg. It is applicable to the laying, maintenance and emergency rescue of railway, and is specialized in various railway bolt operations Specification Model NGM-4.4II Type Rail Profile Grinding Machine Material Stainless Steel Dimensions (L x W x H) (mm) 1480*470*810mm Engine Two-stroke petrol engine/4.4KW Main shaft rpm 4670r/min Bolt screwing flat grinding wheel 125*65*M20 Grinding head angle of inclination 90° Grinding head stroke 45 mm Total weight 61kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg