INTRODUCTION: Due to different appearance, amorphous core include plastic Fe-based amorphous core and epoxy Fe-based wound amorphous core; According to the size, this Fe-based magnetic core is divided into high saturation amorphous beads and filter inductance iron cores. It can used in iron-based amorphous filter inductor and spike suppressor. COMPARE: 1.Plastic case color can change 2.Have better performance in electric car 3.There is a foam pad inside to prevent shaking FEATURE: 1.Suitable for many different high frequency products 2.Magnetic permeability can adjustable between 150-1200 3.High saturation magnetic induction 4.Low coercivity 5.Low core loss 6.ODM available
Code: SWC 3011 Material: 100% cotton OR Polyester and Cotton blend SIZE: XS, S, M, L, XL, 2XL, 3XL, 4XL, 5XL, 6XL Colour: Navy Blue, Royal Blue, Light Blue, Petrol Blue, Tan, Red, Orange, Green, Bottle Green, Dark Grey, White. Description: Flat coat collar One flap pocket on left side of chest Pen pocket on left sleeve â?? Two flap pockets on the lower side of shirt Two trouser pockets Elasticized waist on trousers Hanger loop on collar Reflective tapes on arms, legs and over the chest/shoulder. Piping done on collars and pockets. Adjustable cuffs and ankle openings. Bartacking done in places where more strength is needed to support extra load.
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Tare weight 5.7T Payload 30T-40T Specification Overall size(L*W*H)mm 12350*2480*1520 Wheelbase (mm) 7050+1360+1360 Chassis Main beam "Material: Q345B fabricated carbon steel; Type: straight type; Height: 480mm; Upper plate: 14mmï¼? Bottom plate: 16mm Middle plate: 8mm Process: welded by automatic submerged-acr" Cross beam 10# C type; Q235 Twist lock 12 units King pin 50# Running system Axle "Brand: Xinya; Capacity: 13T16P QTY: 3 units" Tyre "Brand: Chengshan/Triangle Type: 12R22.5-18PR; double mounted; QTY: 12 units" Rim 22.5*9.0-14, 12 units Landing gear 28T total Lifting capacity and 50T static capacity; double speed; large pad feet; Suspension Mechanical system with beams equaliser Leaf spring "Germany type; 90*13mm Qty: 10+10+10" Brake system "Brand: Xinya Type: Dual line braking system Brake air chamber: 6 in total, T30/30*4 + T30*2 Air tank: 40L*2 unit ABS: none" Accessories Electric system "24V LED light; waterproof wire; 7 ways (7 wire harness); Tail lamp with turn signal & brake light & side lamp & reflector etc." Tool box "1 unit; include: 1 tyre spanner, 1 gudgeon sleeve & 1 cranking bar & instruction sheet " Spare wheel bracket 1 unit Print "sand blaster; Color optional; 1 coat of anticorrosive prime, 2 coats of final paints" Protectors "Mudguard; Mud-flags behind rear axle; Mid & Rear Side protection;"
Product Description The Accurate Boss Valiant Reels are baitcasting single speed reels. They are designed for inshore and light action offshore applications. These reels are made with innovative design that minimizes size and weight while maximizing strength, longevity and fish fighting power. These reels were built with shallow water jigging in mind, but they can also be used for live-bait coastal fishing, snapper fishing around reefs, jigging for silver salmon, or targeting school-sized tuna, yellowtail and dorado. The unique curvature of the BV-500â??s rugged body gives this compact, extremely lightweight reel the structural integrity of models twice its size. Basing the BV-300â??s design on the original premise of the Roman Arches or Domes used in early architecture, Accurate has been able to create a significantly stronger reel using less material. While the BV-500â??s walls are thinner, its non-flexing frame and side plate enable it to withstand more stress than similarly sized reels. Accurate has also managed to fit the drive train of a bigger reel perfectly into the BV-500â??s small profile. These Boss Valiant Reels also incorporate a new Accurate feature â?? an easy-find â??Cam Stopâ?? at strike. Instead of having buttons at free spool and strike, these reels have a secure indent in the Drag Cam that stops the drag lever before going into full. This useful feature offers a fail-safe during the heat of battle, preventing the angler from going too far into full drag. These reels offer performance that's as close as you can get to a two-speed in a single-speed reel. Features: 6061 T6 Aircraft Aluminum Anodized for increased corrosion resistance Smooth, Easy Find Cam Stop Strike Sleeved spool for greater Free spool 2 ARB bearings with seal washers for improved corrosion resistance Lever Drag Recessed Ergonomic Thumb Plate Precision-Cut Stainless Steel Gears
Technical Parameters Travel of X and Y Axes: 250x300 mm; Maximum cutting thickness: 350 mm; Maximum Work piece weight: 200 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 340x500x350 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 1.2 KVA; Approx. Machine size (LxWxH): 1480x1010x1400 mm; Approx. Machine weight: 1050 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 1200x1500 mm; Maximum cutting thickness: 1000 mm; Maximum Work piece weight: 3500 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1300x1900x1000 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 4200x3600x2300 mm; Approx. Machine weight: 10000 kg; Approx. Machine control cabinet size: 1200x800x800 mm; Approx. Machine control cabinet weight: 150 kg.
Technical Parameters Travel of X and Y Axes: 630x800 mm; Maximum cutting thickness: 600/800 mm; Maximum Work piece weight: 1000 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 680x1080x600 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2265x1865x1980 mm; Approx. Machine weight: 3500 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
DK7745 Technical Parameters Travel of X and Y Axes: 450x550 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 750 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 500x750x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1865x1350x1900 mm; Approx. Machine weight: 1250 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.
Technical Parameters Travel of X and Y Axes: 400x500 mm; Maximum cutting thickness: 460 mm; Maximum Work piece weight: 450 kg; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 460x690x460 mm; Surface Roughness /Ra: Ra less than 2.5 u.m; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Machining precision/Processing precision: 0.015 mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: 150 square mm/min; Wire speed: 11 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1600x1240x1400 mm; Approx. Machine weight: 1250 kg; Approx. Machine control cabinet size: 700x670x1100 mm; Approx. Machine control cabinet weight: 80 kg.