(1) product description LH-PSR sulfur recovery catalyst is used to treat with the acid gases containing h2s for the sake of recovery sulfur element and environmental protection in oil refinery, chemical factory, iron & steel plant and natural gas treatment processes. The conversion of sulfur can reach to 65~75% in a ordinary bumer, 92-95% it react by two stages clause processes, furthermore to higher than 98% if by three clause reactors. (2) technical specification Type: LH-PSR-1, LH-PSR-21, LH-PSR-31, LH-PSR-41, LH-PSR-51 Size & shape, mm: dia.4-6 balls Color: white Main contents of al2o3, % max.93 Bulk density , g/ml 0.65-0.82 Surface area, m2/g Min.35 Pore volume, ml/gMin.0.4 Crushing strength Min.150n/pc Abrasion loss , % Max.0.3 Major function 1.Universal catalyst for sulfur recovery in acid gas 2.With high hydrolysis and conversion of cos and cs2 3.Catylyst with high sulfate resistance and conversion 4.Catylyst with protection of oxygen leakage 5.Catylyst for tail gas hydrotreating.
Property SVR3L Test method 1.Dirt (retained on 45m aperature ), max. %wt 0. 03 max TCVN 6089:2004 2.Ash, max. %wt 3.Volatile matter, max. %wt 4.Nitrogen, max. %wt 5.Initial Wallace Platicity (P0) range 6.PRI (P30/P0) *100 7.Colour (Lovibond scale) 0.50 max 0.80 max 0.60 max 35 min 60 min 6 max TCVN 6087:2004 TCVN 6088:2004 TCVN 6091:2004 TCVN 6092:2004 TCVN 6092:2004 TCVN 6093:2004 8.Mooney Viscosity ML(1'+4')100oC TCVN 6090:2004 Rubber SVR 3L. Property 1.Dirt (retained on 45m aperature ), max. %wt 2.Ash, max. %wt 3.Volatile matter, max. %wt 4.Nitrogen, max. %wt 5.Initial Wallace Platicity (P0) range 6.PRI (P30/P0) *100 7.Colour (Lovibond scale) 8.Mooney Viscosity ML(1'+4')100oC SVR5 0.05 max 0.60 max 0.80 max 0.60 max 30 min 60 min
Namewater soluble coenzyme q10 Chemical name2-[(all-e)-3, 7, 11, 15, 19, 23, 27, 31, 35, 39-decamethyl-2, 6, 10, 14, 18, 22, 26, 30, 34, 38-tetracontadecaenyl]-5, 6-dimethoxy-3-methyl-p-benzoquinone Cas no. 303-98-0 Specification20% (hplc) Physical and chemical properties Appearance: light yellow granule Molecular formula: c59h90o4 Molecular weight: 863.36 Dispersity: to prepare water soluble coenzyme q10 solution (10ml) whose concentration is 1mg/ml. Distilled water is used. The solution shall be placed for 30 minutes after 15 seconds vibration. Appearance shall be observed and no suspended materials and sediments shall be found. Solubility: to prepare water soluble coenzyme q10 solution (10ml) whose concentration is 1mg/ml. Distilled water is used. The solution shall be extracted by ultrasonic for 1 hour and be centrifugalized for 10 minutes at the speed of 2000r/min. The content of clear solution shall be measured. (in case of coenzyme q10, the solubility of it shall not be lower than 95 %. ).
1. Product Name Trade Name: Fast Red F5RK,F3RK,F2RK C.I. Number: Pigment Red 170 CAS Number: 2786-76-7 EU Number: 220-509-3 Chamical Family: Mono azo 2. Physical, Chemical and Fastness Properties Molecular Weight: 454.48 Molecular Formula: C26H22N4O4 P.H. Value: 6.5-7.5 Density: 1.25-1.36 Oil Absorption ml/100g : 35-45 Light Fastness: 7 Heat Resistance: 180 Water Resistance: 5 Oil Resistance: 5 Acid Resistance: 5 Alkali Resistance: 5 3. Application Shade: Bluish Red,Yellowish Red Main Application: Solvent-Based Ink, Offset Ink, Water-Based Ink, Solvent-Based Paint, Water-Based Paint, Industrial Paint, Plastics, Rubber, Textile Printing , Stationary
1. Product Name Trade Name: 3132 Fast Red 2R C.I. Number: Pigment Red 21 CAS Number: 6410-26-0 EU Number: 229-096-4 Chamical Family: Mono azo 2. Physical, Chemical and Fastness Properties Molecular Weight: 401.84 Molecular Formula: C23H16ClN3O2 P.H. Value: 6.0-7.0 Density: 1.5 Oil Absorption ml/100g: 35-45 Light Fastness: 6 Heat Resistance: 120 Water Resistance: 4 Oil Resistance: 4 Acid Resistance: 4 Alkali Resistance: 4 3. Application Shade: Yellowish Red Main Application: Offset Ink, Water-Based Ink, Water-Based Paint, Solvent-Based Paint, Industrial Paint, Textile Printing , Stationary
1. Product Name Trade Name: 1104 Fast Yellow 10G C.I. Number: Pigment Yellow 3 CAS Number: 6486-23-3 EU Number: 229-355-1 Chamical Family: Mono azo 2. Physical, Chemical and Fastness Properties Molecular Weight: 395.20 Molecular Formula: C16H12 Cl2N4O4 P.H. Value: 6.0-7.0 Density: 1.6 Oil Absorption ml/100g: 25-35 Light Fastness: 6 Heat Resistance: 160 Water Resistance: 4 Oil Resistance: 4 Acid Resistance: 5 Alkali Resistance: 5 3. Application Shade: Greenish Yellow Main Application: Offset Ink, Water-Based Ink, Solvent-Based Paint,Water-Based Paint, Industrial Paint, Plastics, Rubber, Textile Printing ,Stationary
1. Product Name Trade Name: Fast Yellow G C.I. Number: Pigment Yellow 1 CAS Number: 2512-29-0 EU Number: 219-730-8 Chamical Family: Mono azo 2. Physical, Chemical and Fastness Properties Molecular Weight: 340.33 Molecular Formula: C17H16N4O4 P.H. Value: 6.0-7.0 Density: 1.6 Oil Absorption ml/100g : 25-35 Light Fastness: 6 Heat Resistance: 160 Water Resistance: 4 Oil Resistance: 4 Acid Resistance: 5 Alkali Resistance: 5 3. Application Shade: Bright Yellow Main Application: Air Drying Paint, Offset Ink Can Use: Industrial Paint, Water-base Coating
Pigment Yellow 14 1. Product Name Trade Name: Permanent Yellow 2GS,2G,2GB,5GF,5GFG,2GSW C.I. Number: Pigment Yellow 14 CAS Number: 5468-75-7 EU Number: 226-789-3 Chamical Family: Disazo 2. Physical, Chemical and Fastness Properties Molecular Weight: 657.55 Molecular Formula: C34H30Cl2N6O4 P.H. Value: 6.0-7.0 Density: 1.6 Oil Absorption ml/100g : 35-45 Light Fastness: 5 Heat Resistance: 180 Water Resistance: 5 Oil Resistance: 4 Acid Resistance: 5 Alkali Resistance: 5 3. Application Shade: Greenish Yellow Main Application: 2G,2GB for Offset Ink, Plastics 2GS,5GF for NC,PA,PU Solvent-Based Paint,, Industrial Paint 2GS-W for Water-Based Ink, Water-Based Paint, RubTextile Printing, Stationary
1. Product Name Trade Name: 1136 Fast Yellow 5GX C.I. Number: Pigment Yellow 74 CAS Number: 6358-31-2 EU Number: 228-768-4 Chamical Family: Mono azo 2. Physical, Chemical and Fastness Properties Molecular Weight: 386.36 Molecular Formula: C18H18N4O6 P.H. Value: 6.0-7.0 Density: 1.6 Oil Absorption ml/100g : 35-45 Light Fastness: 6 Heat Resistance: 180 Water Resistance: 5 Oil Resistance: 4 Acid Resistance: 5 Alkali Resistance: 5 3. Application Shade: Bright Yellow Main Application: Solvent-Based Ink, Offset Ink, Water-Based Ink, Solvent-Based Paint, Water-Based Paint, Industrial Paint, Textile Printing
1. Product Name Trade Name: 3118 Fast Red BBN C.I. Number: Pigment Red 48:1 CAS Number: 7585-41-3 EU Number: 231-494-8 Chamical Family: Mono azo 2. Physical, Chemical and Fastness Properties Molecular Weight: 556.16 Molecular Formula: C18H11ClN2O6SBa P.H. Value: 7.0-8.0 Density: 1.8 Oil Absorption ml/100g : 35-45 Light Fastness: 6 Heat Resistance: 180 Water Resistance: 4 Oil Resistance: 4 Acid Resistance: 4 Alkali Resistance: 5 3. Application Shade: Yellowish Red Main Application: Solvent-Based Ink, Offset Ink, Water-Based Ink, Solvent-Based Paint, Water-Based Paint, Industrial Paint, Plastics, Rubber, Textile Printing
1. Product Name Trade Name: 3106 Pigment Red R C.I. Number: Pigment Red 4 CAS Number: 2814-77-9 EU Number: 220-562-2 Chemical Family: Mono azo 2. Physical, Chemical and Fastness Properties Molecular Weight: 327.72 Molecular Formula: C16H10ClN3O3 P.H. Value: 5.5-7.5 Density: 1.45-1.65 Oil Absorption(ml/100g): 25-35 Light Fastness: 6 Heat Resistance: 120C Water Resistance: 4 Oil Resistance: 3 Acid Resistance: 3 Alkali Resistance: 3 3. Application Main Application: Water-based Ink, Water-based Paint, Industrial Paint, Plastics, Rubber, Textile Printing, Stationary
1. Product Name Trade Name: 1160 Permanent Yellow HR C.I. Number: Pigment Yellow 83 CAS Number: EU Number: 226-939-8 Chamical Family: Disazo 2. Physical, Chemical and Fastness Properties Molecular Weight: 818.49 Molecular Formula: C36H32Cl4N6O8 P.H. Value: 6.0-7.0 Density: 1.7 Oil Absorption ml/100g : 35-45 Light Fastness: 5 Heat Resistance: 200 Water Resistance: 5 Oil Resistance: 5 Acid Resistance: 5 Alkali Resistance: 5 3. Application Shade: Reddish Yellow, Transparent Main Application: Solvent-Based Ink, Offset Ink, Water-Based Ink, Solvent-Based Paint, Water-Based Paint, Industrial Paint, Plastics, Rubber, Textile Printing, Stationary
CAS NO. 84625-40-1 Constituents : Fatty Oil including Linoleic acid: (C18: 2 w6) 35-45% Linolenic acid: (C18:3 w3) 20-40% Active Ingredients: Sotololn FEMA No.:2485 Applications : Food : Used to add avor/taste to food, butter, avoring syrups, Baked Products, Condiments, Hard Candy, Sweet Sauces, Gelatin Puddings Health : Antiseptic, Expectorant, Carminative, Laxative, progesterone Cosmetics : Anti-inammatory and antioxidant to reduce pain caused by arthritis Physical Properties : PROPERTIES SPECIFICATIONS RESULTS Appearance Pale yellow to golden colored Liquid Conforms Odor Characteristic Fenugreek odor Conforms Refractive Index 1.450 - 1.490 @20 C 1.481 Specic Gravity (g/mL) 0.900 - 0.945 @20 C 0.926
CAS No.: 8002-60-6 Constituents : Total extract including Essential Oil30-50% alpha & beta - zingiberene Farnesene, curcumene, geranial, thujanol, neral, sesquiphellandrene, 24-35% total pungent compounds, Shogals less than 5% FEMA No.:2523 Applications : Food : As spice in soups, rice and meat dishes and various cuisines, as avor and spice in confectionary, beverages and liquor industry, Candies, Meat Products, Condiments etc. Health : Gastrointestinal problems, aiding food digestion, nausea and vomiting, migraine headache PROPERTIES SPECIFICATIONS RESULTS Appearance Brown to brownish red viscous liquid Conforms Odor Spicy, warm complex aroma odor Conforms Refractive Index 1.50 - 1.51 @20 C Conforms Specic Gravity (g/mL) 0.950 -0.980@20 C Conforms
Perfluoro-C2-18-alkylethyl iodides CAS:68188-12-5 Molecular formula:I(CF2)nCF2CF2I Appearance (20):light pink solid Boiling point:130 270 Melting point:50.77 vapor density: (Air = 1) > 1 pH(20) :6 Specific gravity(35):1.8 g/mL Usage: The perfluoroalkyl ethyl series is an important starting material for producing the corresponding alcohol, thiol, sulfonyl chloride, and other fluorinated intermediates. These intermediates can be further modified to produce various fluorinated surfactants, fluorinated surface coatings, and other fluorinated fine chemicals. They have excellent and unique properties including low surface tension, high heat stability, high chemical resistance, as well as water & oil repellency.
Quick Details CAS No.:3441-14-3 Other Names:Direct dyes scarlet Strength:150% Type: Direct Dye MF:C35H25N7Na2O10S2 Place of Origin: China Usage:Leather, Paper,Textile We also supply direct red 31/ 239 /80 / 81/ 224/ 243/ 277/ 79/ 89 Product Description: 1) Name: Direct Red 23 2) Chemical formula: C35H25N7Na2O10S2 3) Usage: Mainly used in Paper and Textile dyestuffs Molecular FormulaC35H25N7Na2O10S2 P.H. Value 7.5 Density(g/cm3) 1.2-1.5 Oil Absorption(ml/100g) 30-35 Light Fastness 7 Heat Resistance 160 Water Resistance 5 Oil Resistance 4 Acid Resistance 5 Alkali Resistance 5. Packaging detail:25kg/kraft bag, iron drum, carton, according to customers' requirement Delivery detail:prompt delivery.
Typical Chemical Analysis Element % Element % SiO2 64.7 CaO 1.3 A12O3 17.6 K20 .46 Fe2O3 4.4 Na2O 2.5 MgO 1.8 TiO2 .16 H2O (Crystal) 5.9 Specifications SPECS TYPICAL ANALYSIS API SPECS Fann @ 600 rpm 35 - 40 30.00 Fann @ 300 rpm 25 - 30 Plastic Viscosity 10 Yield Point/Plastic 1.5 - 2.0 3 Maximum Viscosity Ratio Filtrate 13.5 ml. 15.0 Maximum Dry Sieve Analysis 78% - 80% (-200 Mesh) Wet Sieve Analysis 2.5% - 3.0% 4.0 Maximum Moisture 7.0% - 9.0% 10.0% Maximum pH (6.0% solution) 8.5 - 9.5. 25, 50 and 1000kg.
Targets of chemical - SVR 3l management of rubber by TCVN 3769:2004. 1. Concentrations of contaminants retained on the 45m sieve,% m / m, not more than: 0.03 2. Ash,% m / m, not more than: 0.50 3. Nitrogen content,% m / m, not more than: .60 4. Volatiles content,% m / m, not more than: 0.80 5. Early plasticity (Po), not less than: 35 6. Maintain the viscosity index (PRI), not less than: 60 7. Lovibond color index, the form, not more than: 6 8. Mooney viscosity ML (1 '+ 4') 1000C. 33, 33kg/loose bale/ load on 20'DC container/20mts.
Product feature 1.High strength, high elasticity, excellent stickiness and cohesion made stickiness/airproof more flexible and resistent. 2.One-component, moisture curable, non-sagging, no dropping on stand surface, convenience construction. 3.No solvent, no corrosion to base materials, no pollution to the environment. 4.Excellent sealing, puncture resistance, good aging, oil and water resistance. Applications 1.Elastic bondings for windshield and side glass of automobile repair. Technical Data Test items Performance Density: 1.25+/-0.05g/cm3 Touch dry time: 10~60 min Curing in 24h: 3~5mm Volatile content: =6.0MPa Shore A hardness: 55+/-5A0 Elongation at break: >=450% Extrudability: 150g/min Application temperature: +5~+35 C; 310 ml cartridge packing/400ml, 600ml sausage packing
Full cream milk powder We can supply full cream milk powder meet venezuela standard : Specifications: Manufacture obtain by the spray method Appearance uniform Colour creamy Fat 28% min Protein 24% min Lactose 35% min Moisture content 4% max Or the specs as arranged: Grasa min. 26, 0 mßx. 27, 0 Humedad mßx. 3, 5 Protefnas min. 24, 5 Cloruros min. 0, 07 mßx. 0, 11 Cenizas mßx. 5, 9 Acidez (g ac.Lactico/100g) mßx. 1, 35 Grasa libre mßx. 2, 0 Lactosa min. 34, 0 -ndice de insolubilidad (ml) mßx. 0, 5 Partfculas quemadas mßx. B-15n Vitamina a min. 960 (ug/100g) min. 3200 (ui/100g) Vitamina d3 min. 8 (ug/100g) min. 320 (ui/100g) We can supply full cream milk powder meeting the requirement in the international marketonly imported machine in china can make this kind of products.If we don't have other big order that time, we can supply at least 2000mt per month.