Product Code Product Description PRS-ZE0180 Semi-Automatic Penetrometer for Liquid Limit, 220-240 V 50-60 Hz PRS-ZE0180/110 Semi-Automatic Penetrometer for Liquid Limit,110 V 60 Hz PRS-ZE0182 Liquid Limit Penetration Test Cone 30° Angle,Stainless Steel PRS-ZE0183 Cone Test Gauge for PRS-ZE0182 PRS-ZE0184 Liquid Limit Penetration Test Cone 60° Angle,Stainless Steel PRS-ZE0185 Cone Test Gauge for PRS-ZE0184 PRSGH-1425 Moisture Content Tin with Lid �:55 mm x h:35 mm, Aluminum PRSGH-1435 Moisture Content Tin with Lid 75 mm x h:50 mm, Aluminum A Cone Penetrometer is used to determine the moisture content at which clay soils pass from a plastic to a liquid state, and used also for the determination of undrained shear strength. The PRS-ZE0180 Semi-Automatic Penetrometer for Liquid Limit consists of a cast iron base with course and fine leveling screws, a digital penetration measurement gauge 0.01 mm resolution/readibility and an automatic penetration timer unit. The PRS-ZE0180 is equipped with a digital, 99 second timer, which can be set to the standard 5 second free-fall time or to some other setting for customized tests. When engaged the timer will allow the needle to free fall into the sample for the specific time interval and then lock the needle from advancing while providing a direct reading of the test results. 320 g weight should be added to the 30° angle cone to get a total weight of 400 g for the shear strength test. Semi-Automatic Penetrometer for Liquid Limit supplied complete with; � Automatic Penetration Timer Unit, � 30° Penetration Cone � Sample Cups, 3 pcs. Aluminium, �55 mm x h:35 mm.
Product Code Product Description PRS-ZE0200 Manual Liquid Limit Device (Casagrande),BS PRS-ZE0202 Manual Liquid Limit Device (Casagrande), ASTM - AASHTO PRS-ZE0210 Motorized Liquid Limit Device (Casagrande), BS, 220-240 V 50-60 Hz PRS-ZE0212 Motorized Liquid Limit Device (Casagrande),ASTM â??AASHTO 220-240 V 50-60 Hz PRS-ZE0215 Metal Grooving Tool and Gauge Block, ASTM PRS-ZE0216 Plastic Grooving Tool, ASTM PRS-ZE0217 Plastic Grooving Tool, BS PRS-ZE0218 Brass Grooving Tool, AASHTO PRS-ZE0220 Resilience (Rebound) Tester, ASTM PRS-ZE0221 Resilience (Rebound) Tester, TS 1900-1; AASHTO PRS-ZE0225 Spare Brass Cup, for all Models STANDARDS : ASTM D4318; BS 1377:2; AASHTO T89; TS 1900-1 The PARSROS Manual and Motorized Liquid Limit Apparatus (Casagrande) are used to determine the moisture content at which clay soils pass from plastic to liquid state. The Devices consist of an adjustable crank and cam mechanism, a blow counter and a removable brass cup fitted on the base. Different models with the same shape but with different base and cup weights are available according to the required specifications. Manual and Motorized versions are available. PRS-ZE0200 and PRS-ZE0200 models are supplied with a BS type plastic grooving tool. PRS-ZE0202 and PRS-ZE0212 models are supplied with a ASTM type plastic grooving tool. Other types of grooving tools should be ordered separately. Product Model Manual Motorized Dimensions 240x230x150 mm 200x290x170 mm Weight (approx.) 2 kg 4.2 kg
Product Code Product Description PRS-ZE0270 Hydrometer Test Set PRS-ZE0272 Soil Dispersion Mixer, 220-240 V 50-60 Hz PRS-ZE0273 Hydrometer Bath, 220-240 V 50-60 Hz PRS-ZE0274 Hydrometer 151H PRS-ZE0275 Hydrometer 152H PRS-ZE0276 Hydrometer Jars, 1000 ml PRSGC-0900 Sodium Hexametaphosphate, 1kg STANDARDS : ASTM D422; AASHTO T88 Hydrometer Test Set is used to determine the particle size distribution of very fine materials such as silt and clay. The soil dispersion mixer for hydrometer test method, operates at over 13,000 r.p.m, includes dispersion cup, stirring paddle, automatic switch-on by positioning bowl, 100 W power consumption The hydrometer bath, circulation unit, ambient to 35°C working temperature, 50 L capacity tank with 8 pcs. sedimentation cylinder capacity. 152H Hydrometer should be ordered separately. The Hydrometer Test Set is supplied complete with; â?¢ Dispersion mixer â?¢ Hydrometer bath â?¢ Hydrometer, 151H, 1pcs. â?¢ Sodium hexametaphosphate 1 kg, â?¢ Sedimentation cylinder, 1000 ml, 6 pcs. â?¢ Heater, â?¢ Circulation unit â?¢ Rubber stopper for sedimentation cylinder â?¢ Beaker, 600 cc 151 H Hydrometer 11 â?? Length 0,995-1,038 g/ml Ä°n 0,001 g/ml division 152H Hidrometre 11â?� Lenght 5 - 60 g/L in 1g/L Ä°n 1g/L division Dimensions 330x630x450 mm Weight (approx.) 20 kg
Product Code Product Description PRS-ZE1320 Falling Head Permeability Set PRS-ZE1322 Falling Head Permeability Cell 100 mm dia. PRS-ZE1324 Wooden Stand with 4 Manometer Tubes PRS-ZE1326 Soaking Reservoir Tank STANDARDS : BS 5930:1999, / 1377, ASTM 46 / 47 The PRS-ZE1320 Falling Head Permeability Set is used to study the behaviour of soil, particularly finegrained soils such as clay-like or silty soils, with respect to water flow. The PRS-ZE1322 Falling Head Permeability Cell is manufactured from plated steel with an inside diameter of 100 mm. The PRS-ZE1324 Wooden Stand is fitted with 4 glass Manometer Tubes of each 1500 mm long with inside diameters of about 21 mm, 12 mm, 5 mm and 3.5 mm. All tubes have connection valves. The PRS-ZE1326 Soaking Reservoir Tank is manufactured from plated steel with an over-flow tube and is used for containing the permeability cell during the test. Optional Equipment For De-Airing Water should be ordered separately. The PRS-ZE1320 Falling Head Permeability Set is supplied complete with; â?¢ Ã? 100 mm Falling Head Permeability Cell â?¢ Wooden Stand with 4 manometer tubes â?¢ Soaking Reservoir Tank â?¢ 3 m Hose Product Code Dimensions Weight (approx.) PRS-ZE1322 150x150x260 mm 3 kg PRS-ZE1324 230x100x1700 mm 6.6 kg PRS-ZE1326 320x320x250 mm 3.6 kg
Product Code Product Description PRS-A0610 Wide Wheel Abrasion Testing Machine, 220-240 V 50 Hz(110 V 60 Hz version is available upon request) PRS-A0610/1 Wide Abrasion Wheel, for PRS-A0610 PRS-A0610/2 Convert Equipment Set from PRS-A0610 Wide Wheel Abrasion Testing Machine to PRS-A0613 Narrow Wheel Abrasion Testing Machine PRS-A0611 Abrasive Corundum Sand 25 kg for PRS-A0610 and PRS-A0613 PRS-A0613 Calibration Marble for PRS-A0610 PRS-A0612 Narrow Wheel Abrasion Testing Machine, 220-240 V 50 Hz (110V 60Hz version is available upon request) PRS-A0613/1 Narrow Abrasion Wheel, for PRS-A0613 PRS-A0613/2 Convert Equipment Set from PRS-A0613 Narrow Wheel Abrasion Testing Machine to PRS-A0614 Wide Wheel Abrasion Testing Machine PRS-A0610 Mould, EN 12808-2, Polyethylene, 100 ±1x100 ±1x10 ±1 mm, for PRS-A0613 STANDARDS Wide Wheel : EN 1338, 1339, 1340, 1341, 1342, 13748-1,13748-2, 14157 Narrow Wheel: 10545-6, 12808-2 PRS-A0610 Abrasion Testing Machine is designed for determining the resistance to abrasion/wear of natural stones and concrete products used for paving. The abrasion wheel is 70 mm thick and rotates at a speed of 75 rpm. The machine is equipped with adigital counter which stops the machine at the end of a preset number of revolutions. PRS-A0613 Narrow Wheel Abrasion Testing Machine is designed for determining the resistance to abrasion of unglazed tiles, grouts used for tiles and clay pavers. The abrasion wheel is 10 mm thick. Abrasive corundum sand, calibration marble (boloneisse) and mould (for EN 12808-2) should be ordered separately. PRS-A0610 and PRS-A0613 Abrasion Testing Machines can be convert the other. When there is a need for abration of different type materials, PRS-A0610 Machine can be convert to PRS-A0613 Machine and also PRS-A0613 Machine can be convert to PRS-A0610 Machine by using PRS-A0610/2 or PRS-A0613/2 by users. Appropriate convert equipment set (PRS-A0610/2 or PRS-A0613/2) should be ordered seperately. Dimensions 620x670x1350 mm Weigh (approx.) 130 kg Power 370 W
Figure tutsuluk are manufactured with natural stone stone powder. Carving wood by hand to the table raw and real tutsulug have been shaped by beech tree was used. And bring out the texture of the tree to protect the tree and the colors are 1. Class teak oil has been applied. Incense ash to avoid the middle part of the tree is carved in. Stick incense, in order to be opened a small hole on the inner side of the mouth of the figure. 3 organic brand satya incense are sent as a gift. (15 g), Bamboo Bar, wood dust, plants, honey, prepared with organic oils and incense resins are produced with the traditional method of hugs in India. Do not contain carbon. The texture of clay models made with stones collected from the coast of Assos has been transferred from the mold after it was taken. Finally, the mold is manufactured with the loss of the dust to the actual stone figure. Stone height: cm head length ranged from 7.5 cm 28-30 CM. It is handmade in the tone to be sent because there may be very little difference in the texture and color of the figure. We use the natural patterns of the wood to be sent to the color of the base and contains a diversity of. In the gallery you can see examples of the base product to be sent.
Figure tutsuluk are manufactured with natural stone stone powder. Carving wood by hand to the table raw and real tutsulug have been shaped by beech tree was used. And bring out the texture of the tree to protect the tree and the colors are 1. Class teak oil has been applied. Incense ash to avoid the middle part of the tree is carved in. Stick incense, in order to be opened a small hole on the inner side of the mouth of the figure. Organic Satya incense gift box are sent as a brand. (15 g), Bamboo Bar, wood dust, plants, honey, prepared with organic oils and incense resins are produced with the traditional method of hugs in India. Do not contain carbon. The texture of clay models made with stones collected from the coast of Assos has been transferred from the mold after it was taken. Finally, the mold is manufactured with the loss of the dust to the actual stone figure. Stone height: cm head length ranged from 7.5 cm 28-30 CM. It is handmade in the tone to be sent because there may be very little difference in the texture and color of the figure. We use the natural patterns of the wood to be sent to the color of the base and contains a diversity of. In the gallery you can see examples of the base product to be sent.
Figure tutsuluk are manufactured with natural stone stone powder. Carving wood by hand to the table raw and real tutsulug have been shaped by beech tree was used. And bring out the texture of the tree to protect the tree and the colors are 1. Class teak oil has been applied. Incense ash to avoid the middle part of the tree is carved in. Stick incense, in order to be opened a small hole on the inner side of the mouth of the figure. Organic Satya incense gift box are sent as a brand. (15 g), Bamboo Bar, wood dust, plants, honey, prepared with organic oils and incense resins are produced with the traditional method of hugs in India. Do not contain carbon. The texture of clay models made with stones collected from the coast of Assos has been transferred from the mold after it was taken. Finally, the mold is manufactured with the loss of the dust to the actual stone figure. Stone height: cm head length ranged from 7.5 cm 28-30 CM. It is handmade in the tone to be sent because there may be very little difference in the texture and color of the figure. We use the natural patterns of the wood to be sent to the color of the base and contains a diversity of. In the gallery you can see examples of the base product to be sent.
Fly ash is used: In the production of lightweight concrete. Low-cement concrete is used in the preparation of road bases. Fly ash is also used in slag-silicate concretes, which are used to repair roads, airfields, bridges, as well as in the construction of acid-resistant floors in chemical plants, livestock farms, and metallurgical facilities. In the production of foam concrete, its introduction into the foam concrete mixture increases the aggregate stability of the mixture between the beginning and end of the cement dough setting, which prevents the movement of components and prevents negative effects on the formation of the structure. Fly ash easily replaces cement in the production of mortars, ready-mixed concrete, and finished products. It is used as an additive to cement without reducing its activity, is used in the preparation of concrete for road construction, and as an additive to clay in the manufacture of tiles and bricks. As a component of dry construction mixes: production of dry masonry mixes consisting of cement, sand, fly ash, ICP, and powdered superplasticizer.
---------Description--------- ! We provide installation work and operational training for all of our equipment! Fixed Sand Screening & washing Plant is one of the solutions in the manufacturing quarries, where crushed stone products or any type of construction aggregate need to be sorted into fractions for the further use. Aggregate sorting plant can be used for both stone and sand products, as long as it is mixed of different fraction sizes. Also, sorting plants can be supplied with sand washing system, so that clay and sand crushed out from the main product is washed away, to be readily usable at the end. Equipment consists of: 20 m3 feeding bunker 2200 x 6000 mm vibrating screen 750 x 7500 mm double helix screw washer Feel Free To Contact Us For Any Additional Information!
Quick Details Place of Origin:turkey Brand Name: OCC Paper Scrap Model Number: 09987 Type: OCC Packaging & Delivery Packaging Details per customers demand Delivery Time 7 days Specifications: Bales & Scrap paper with high quality 1. Product Type: Waste Paper 2. Type: OCC, ONP, OMG, YELLOW PAGES, A3, A4 WASTE PAPER 3. Packing: BALE (1.2-1.4 TONS/ BALE) 4. Feature: Mixed & NOT MIXED 5. Quantity: 1000 Tons per Month 6. Place of Origin: Germany 22/23 tons in 40 Feet Container - 36 bales in each Container We could offer Monthly bulk Quantities of Paper both scrap in bales & non scrap as below: OCC Waste Paper OINP waste paper OMG Waste Paper ONP Waste Paper The Materials we can supply: ONP OINP Magazine OCC Sorted Office Paper Waste Yellow Pages Telephone directories Waste newsprint paper Mixed Paper Gray Back Clay Coated Cardboard Mixed Pulp and Imported Waste Paper 1. Bulk Packing: Plastic film wrapped on strong wooden pallets with four 4 angle protector) 2. Ream Packing: 100 sheets per ream wrapped with PE Coated Kraft Paper and film on strong wooden pallets with four angle protector. 3. Roll Packing: Kraft paper/Film wrapped outside on strong wooden pallets or without pallet
Firewood BIRCH 25 L (pcs). One of the main properties of firewood is heat (calorific value). Calorific value is the size that indicates how much energy a certain amount of burnt firewood emits. Firewood is divided into three groups of heat: The first group of heat is wood of oak, ash, birch, hornbeam, maple, elm, with a calorific value of 2250 to 2500 kcal. The second group of heat is black alder, pine firewood, the caloric content of which is from 1800 to 1900 kcal. The third group of heat is firewood of alder, aspen, linden, willow, spruce, poplar, with a calorific value of 1500 to 1700 kcal. Firewood of the first group of heat is the most incandescent, so it is best suited for loaded boilers of higher power, but it is not recommended to fire clay or ovens, since too high combustion temperatures can lead to cracking of cocci or the furnace itself. We offer broken dried firewood from birch, ash, alder, black alder, aspen wood, neatly placed in rows in wooden containers. The density of the volume of neatly stacked firewood is significantly higher than that of smashed firewood. The volume of one container is 1.5 m3 and corresponds to 2 m3 of the volume of combined firewood. Firewood containers in your yard ?less busy space, garbage, handling after stacking firewood in a firewood shed. Wooden containers can also replace firewood, just by placing them in the yard in the desired place and covering their top with any coating. The advantage of the firewood we offer: *there is no need to overload the translated firewood; *unloading in a place convenient for you (firewood, pantry, etc.); *wooden containers remain with the customer; *quality firewood in convenient packaging at a low price. We can also offer dry split firewood in bags of 25 ltr. and 40 ltr each.
