We are counted among the well-reputed firm for providing cold water Inlet also known as cold water difusser inlet pipe and hot water Outlet Pipe or dip tupe to our esteemed patrons. Customers can easily get them from us in varied specifications at nominal prices. We are engaged in manufacturing of insert moulded Inner lnlet pipe and Inner Outlet pipe used in inner tank of Electric Water Heater made with high precision from stain-less steel (304 food grade) and temperature resistant engineering plastic. These pipes are also called as dip tubes and plays important role in electrical water. Our dip tubes or inner inlet pipes are designed to direct the incoming cold water to the bottom of heater. Also the inner outlet pipes are designed to fetch hot water from the top of the water heater thereby increasing efficiency of water heater. Highlights 1. Material SS 304 and Nylon 6 2. Leak proof thereby ensuring efficient hot water. 3. Rust proof solution 4. Unbreakable dip tube for water heater an end to maintenance of dip tube. 5. Available in customized lengths from 80 mm to 1650mm
We are counted among the well-reputed firm for providing Inlet and Outlet Pipe to our esteemed patrons. Customers can easily get them from us in varied specifications at nominal prices. We are engaged in manufacturing of insert moulded Inner lnlet pipe and Inner Outlet pipe used in inner tank of Electric Water Heater made with high precision from stain-less steel (304 food grade) and temperature resistant engineering plastic. These pipes are also called as dip tubes and plays important role in electrical water. Our dip tubes or inner inlet pipes are designed to direct the incoming cold water to the bottom of heater. Also the inner outlet pipes are designed to fetch hot water from the top of the water heater thereby increasing efficiency of water heater. Highlights 1. Material SS 304 and Nylon 6 2. Leak proof thereby ensuring efficient hot water. 3. Rust proof solution 4. Unbreakable dip tube for water heater an end to maintenance of dip tube. 5.available in customised lengths from 80 mm to 1650mm
Water Level Indicator Flat tape water level Indicator Enhanced Laser Marked Tape Features Durable PVDF non-stretch tape Improved electrical properties Thicker dog bone design prevents clinging to sides of the well Permanently laser marked every 1/100 ft or each mm The PVDF flat tape is laser marked every 1/100 ft or each mm; lengths up to 5000 ft (1500 m). New flat tape has increased tensile strength and electrical efficiency by using 6 strands of copper coated stainless steel and 13 strands of stainless steel in each conductor. The P7 Water Level Meter Probe is engineered to allow submersion to 1000 ft. (300 m). Sensor at the tip of the probe provides
VOLVOFM12 startMachine * intercooler intake pipe clamp Electric control box FKDQ640-7 hand pneumatic pressure relief valve JYSQ21-25 Inclinator XXQ-178 178-310 transmission shaft 1.02.51.003 35-70 BOP AccessoriesFZ35-70 Ram rubber core 7-5/8" Seal: Oil F/Transmission Assy Ps-350/500 YS26001 Oil Filter, p/n LF 3625. FLEETGUARD for MERCEDES-BENZ model OM502LA engine. Material: synthetic canvas, steel 131100704 Oil seal with two lugs R01-FG dimensions 255x299x20 Drilling wire rope 6*19+FC left cross 6.2mm 1670 QUICK RELEASE VALVE, FOR DRAWWORKS, MODEL: JC70DB, MAKE: HONGHUA, P/N: KPJ-L15 AIR FILTER D-M42 FOR HPUYZ095.00 Drill pipe power tong accessories ZQ203-100 Right angle connector 0108.01-03M Wheel Loader AccessoriesWA380-3 starter motor 6743-82-6820 Drilling rig top drive accessoriesDQ40/50/70 roller SJ62 01.1.04 NB800G.05.13.00 Spring guide Plate:Clamp,Service Loop 78002 Drilling rig top drive accessoriesDQ40/50/70 flat steel wire cylindrical helical compression spring medium size 245*13*45 crank DQ70BSC 9703330011 �¦90-150/5 34JR6Y-L6 three-position four-way reversing valve for drilling rig special air control element Hydraulic tank accessories F-1600 O-ring 190*3.55G GB/T3452.1-1992 588-04-3 Drill pipe clamp accessories ZQ203-100 Upper sealing ring SHIM, ROTARY TABLE, ZP-375, NOV 10038013-001 LOCKWIRE Z6001-8 TEST FITTING, SAE-6 93024-6SAE 59124P230010 HOSE ASSEMBLY CONNECTING COLLECTOR; 23519348; DETROIT DIESEL; MIDDLE OUTLET PIPE Drill pipe clamp accessories ZQ203-100 pin 0101-39M Casing power tong accessories TQ35-13 3/8" jaw plate assembly 7" 56.620.00 PDC bit 152.4mm M1365 Power end accessories JR5231TSN OFM600 lubricating oil filter element P080001485 8864951P167 ARM,BEARING PE Bearing for 34ZS-21,25 Three position, four way valve-FOR BOP CONTROL UNIT, BPM Truck inner tube 1200in 20in Kunlun 50008-12-C5 SCREW, CAP-HEX HD (UNC) PIN-II PS80-03 FOR SAFETY CALIPER BRAKE ASSEMBLY, FOR DRAWWORKS, MODEL: JC70DB 35�?35 BOP accessoriesFZ35-35 dust ring DFZ5414-22 Pin : Spiral 51222-12-24 Electric control box FKQ640-6Accumulator rack 6PK.01.18-00 Liquid end accessories SEV5320TGJ TPH400 oil guide ring 4" Die support 203-216 1.03.09.046 GT550E variable speed* high and low speed hose 25YT-5J Explosion-proof plug-in Hydraulic tank accessories F-1000 Spacer Cylindrical roller bearings 234 PIN, CARRIAGE, GUIDE BEAM 123715 BRG, PLAIN, 9.00 x 9.187 x 0.75 M02-1041-010 hydraulic hose 2.4.21.080 Winch output shaft accessories ZJ32L6 shift mechanism BA70011-06.00 Detroit diesel engine parts crank linkage * crankshaft 16V149 5149096 Drill pipe clamp accessories ZQ203-100 Barometer connector assembly 010802-00M Swivel gooseneck SL225-02 for plug SL225 Casing power tong accessories TQ340-35Y washer 52.100-06 30173216-1 30171147-EX-2/39 Hydraulic tank accessories F-1600 Mud pump insurance valve piston Seven-pin plug/seat P28K4QJG/P28J4MQJG
Funcation: 1. Â High speed: It can cut 100~120 cut per minute. (50mm long) Â 2. Tolerance: +/- 0.5% of cutting length 3. Cutting type: Cutting is neat due to using a cold cutter which is durable. 4. Automatic operation: It works automatically only by setting length and quantity 5. Automatic stopper: It stops automatically if materials run out during operation 6. Memory: Set-length, set quantity & set speed will not be erased even if power off & on 7. Application: Belt loop, soft tube, string, plastic zipper, elastic band, small webbing, etc.
Pyramid screen API 35 PMD500DX-A35 Retaining pin 30173958 Round dies for metric thread GOST 9740-71: M30 X 3.5 Nylon pipe 12 X 1.75 75SI to X J-750 for 200 m Main bearing bushing RGF1000-02.02 32-38Standard Step Liner NBM455-2000/2000A 3801950003 XJ045SJHZC016 two-position three X one-way air control valve for XJ-450 unit gasket casing 64843012 648403012 Pin connector BJ150 STEM SCREW J007416 Hydrocyclone 4 AKR-2S12N Power entry circuit breaker P-HA-RPS-32000000 57986457 Air filter Hydraulic filter SP08x10 Cylinder seal Kit for positioner assy BUW 1050 43.25 H18-2513-04A Piston ring P101382HP SPM QWS-2500SD pump TWS-2000 TUBE ASSY BRAKE LINE 110173 1.07.05.006 brake disc 2.4.51.712 sealing ring Ring RS11309.05.026/RS-F1600/F1300 Retarder temperature sensor 15326309 Clip 219 with sealing GNZS703E Flow Switch DKM-1/4,G1 GH3101-05.13.00Spring guide Axle bushing 56.650.01 QC010012 Piston SEAL IMPELLER 648405082 19110-72 Pressure testing connector PT-3 REGULATOR AVR BASLER VOLTAGE DECS100-B15 CLUTCH BLADDER LT965/305T JC030701 Capacitor Bank CRBG11/root3-200-1W,16uF,200KVAR,11/root3 KV inserts battery dies holder ZQ203-100-SM 4 Jaw plate assembly 3 1/2 ZQ203-100 AC225002-3200-Brake assy for DG 450 HOOK Piston rod 107.29.110.24 Lanshou LS O RING: 97.5 X 3.55GGB/T3452.1-1992 Bolt 50108-16-C 2.4.20.115 Hose assembly Steel Cord Bucket Bolt TDS500 ad-Y55-76.8m elevateÃ??10 X50mm Counter Sink Head 134-0964 Parking brake oil filter Circuit Breaker T4L 250 TMD 50-500 FF 3P 1SDA054227R1 ABB Washer for hydraulic wrench ZQ 203/100 ZQ203-015 114869-PL-RED Connector Power Single Pin 646/777 MCM Hydraulic hoses 32 mm at 35 MPa L-20m with NPT-1 1/4" fitting Refuel Oil Suction Filter Element 810504-00-1800 SEALANT277 Cardan BHJ-250E751 Friction clutch pressure plate ATD 330 OH harting HAN24EAGGLBK2409300240304 56041502 Oil filter element Pressure hose 22IIIX470 1400036262, Ex. Flood Light, Warom Pn : Bat85-Hie-400; 220v;50hz?Atex For Warom Wellsite And Lighting Termination Unit-Bornier de Raccordement pour le Servomoteur Hydraulique NTHS03 5112280563 FILTER Globe valve JZR3-L8 Seal P109379 SPM TWS-600S pump Spring Wichita ATD-330H STVC 211 Fitting Hyd Male NPT X Female JIC 3/8" X 3/8" Pump Oil 46C14 DC Indicate lamp XB2BVB4C LEVER FOR VALVE 5"-6" 24228001 3537 Bolt 3/4" X 4-1/2" drilled head Pressure recorder M365-415 10126853-011 Low Voltage AC drive 3P 380-480V,9.4A ACS510-01-09A4-4 ABB BEARING OB 2 REQ'D 648408201S 42869 SEPARATOR BUSHING COVER / PULSATOR 412804 Oil seal PD220X260X18 HG4-692-67 Connecting coupling JC073.10 Transmission shaft VHJ250E V-ribbed belt 8RK1245 Main bearing 4065-19-12[4M5082.01-05 280 X180 20/ChSnSb11-b Grooved Liner NBM451-2000
Product Description Product Info for Swarovski 8x25 CL Pocket Binoculars (Green, Wild Nature Accessories Package) The Swarovski Optik 8x25 CL Pocket Binoculars are a lightweight optic with the quality construction and viewing precision that nature enthusiasts have come to expect from the brand. They feature a dual-hinge bridge that allows the optical barrels to fold tightly underneath for a compact footprint that can fit in a pocket, pack, or purse. The folding bridge design also yields a broad 51-74mm interpupillary distance, so the binoculars are comfortable for a wide range of adults and children. High-quality glass bearing Swarovski's SWAROBRIGHT, SWAROTOP, and SWARODUR lens coatings deliver a crisp image with accurate color rendition across the entire field of view. The optical tubes are nitrogen-filled to prevent internal fogging from condensation and submersible to a depth of 13'. This model of the CL Pocket comes with the Wild Nature accessories packageâ??a nylon web neck strap and a green field bag. Optical Performance 8x magnification, 25mm objectives 52�° apparent angle of view, 357' at 1000 yards linear field of view 8.2 ft close focus distance 17mm eye relief Use and Handling Recessed center focus wheel Twist-up eyecups made of hypoallergenic material Dual-hinge folding bridge enables compact footprint 51-74mm interpupillary distance will fit children and adults Swarovski CL Pocket Wild Nature Specs Prism Type Roof Performance Magnification 8x Objective Lens Diameter 25 mm Angle of View 6.8�° (Actual) Field of View 357' @ 1000 yd / 119 m @ 1000 m Minimum Focus Distance 8.2' / 2.5 m Exit Pupil Diameter 3.1 mm Eye Relief 17 mm Interpupillary Adjustment 48.3 to 73.7 mm / 1.9 to 2.9" Diopter Adjustment -5 to +5 Focus Type Center Features Water Resistance Waterproof General Dimensions 4.3 x 3.9 x 1.8" / 10.9 x 9.9 x 4.6 cm Weight 12.2 oz / 345.9 g Packaging Info Package Weight 2.01 lb Box Dimensions (LxWxH) 7.7 x 7.2 x 3.3"
Phone : +62 (21) 57945487 Fax : +62 (21) 57944748 Whatsapp : +62 851-7512-3152 Instagram : @expertbinocular https://www.expertbinocular.com/products/Swarovski... Product Description Product Info for Swarovski 10x25 CL Pocket Mountain Binoculars (Green, Wild Nature Accessory Package) The Swarovski Optik 10x25 CL Pocket Binoculars are a lightweight optic with the quality construction and viewing precision that nature enthusiasts have come to expect from the brand. They feature a dual-hinge bridge that allows the optical barrels to fold tightly underneath for space-saving compact footprint that can easily fit in a pocket, pack, or purse. The folding bridge design also yields a broad 51-74mm interpupillary distance, so the binoculars are comfortable for a wide range of adults and children. High-quality glass bearing Swarovski's SWAROBRIGHT, SWAROTOP, and SWARODUR lens coatings deliver a crisp image with accurate color rendition across the entire field of view. The optical tubes are nitrogen-filled to prevent internal fogging from condensation and submersible to a depth of 13'. This model of the Pocket CL comes with the Mountain accessory packageâ??a black web neck strap and a green carry case. Optical Performance 10x magnification 25mm objectives Compact roof prism optical path Highly reflective SWAROBRIGHT prism coating optimizes color representation and contrast Anti-reflection SWAROTOP lens coating reduces glare and improves contrast, color rendition, and clarity Scratch-resistant SWARODUR coatings protect exterior lens surfaces 294' field of view at 1000 yards Use and Handling Closed-bridge/dual-hinge configuration Recessed center focus wheel with raised ridges to more easily control the focus precision �±5 right eye dioptric correction 51-74mm interpupillary adjustment range accommodates a wide variety of users from children to adults Twist-up eyecups for comfortable use with or without eyewear Long 17mm eye relief Comfortable 2.5mm exit pupil Swarovski CL Pocket Wild Nature Specs Prism Type Roof Performance Magnification 10x Objective Lens Diameter 25 mm Angle of View 5.6�° (Actual) Field of View 294' @ 1000 yd / 98 m @ 1000 m Minimum Focus Distance 8.2' / 2.5 m Exit Pupil Diameter 2.5 mm Eye Relief 17 mm Interpupillary Adjustment 51 to 74 mm / 2 to 2.9" Diopter Adjustment -5 to +5 Focus Type Center Features Fogproof Yes Water Resistance Waterproof General Dimensions 4.3 x 3.9 x 1.8" / 11 x 9.8 x 4.6 cm Weight 12.35 oz / 350 g Packaging Info Package Weight 2.01 lb Box Dimensions (LxWxH) 7.7 x 7.1 x 3.2"
High-performance laser machine designed for efficient cutting and engraving in industries such as Footwear, Apparels, Electronics & Embroidery. With its advanced features and precise control technology, it offers exceptional speed, accuracy, and versatility, making it an ideal choice for large-scale cutting and engraving applications. Single Head Configuration: This machine is equipped with Single laser head, enabling simultaneous cutting or engraving operations. It maximizes productivity by reducing processing time and increasing efficiency. High-Speed DSP Control: The machine utilizes advanced 64-bit high-speed DSP control technology, enabling continuous and fast curve cutting. It optimizes the processing route for improved efficiency and shorter production time. Stable and Precise Cutting: The three-way reflective system and 6-balanced sliding type guide rails ensure stability and precision in both cutting and engraving processes. Wide Range of Materials: The machine is suitable for working with various non-metal materials, including cloth, leather, acrylic, rubber, wood, paper, ceramics, and more. Characteristic BS-6040 BS-9060 BS-1490 Model No. BS-6040 BS-9060 BS-1490 Engraving Area 600 mm x 400 mm 900 mm x 600 mm 1400 mm x 900 mm Cutting Speed 0-800 mm/min 0-800 mm/min 0-800 mm/min Laser Power 80 W 80 W 100 W Resolution 0.025 mm 0.025 mm 0.025 mm Positioning Precision
Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 3000 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 500x400 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 850x540x300 mm; Maximum Work piece weight: 450 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 1800 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 400x320 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 620x480x300 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1700x1300x2160 mm; Approx. Machine weight: 1500 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
This system contains below parts and its description is as below: Battery watering plug (BWP): This plug is made from polyprolene material. It will allow water inside only when the electrolyte level is below plastic float inside. Please note that this BWP will not work on gravity water pressure. It requires Minimum 10 psi water pressure for normal operation. Each BWP has one adaptor for easy fitting in 30 MM TYPE THREAD CELL VENT PLUG. ( there is one more adaptor for lift battery cell 35 mm push in type ) Water feeding pump: It is a 12 v dc windshield washer Pump required to pump and supply water to BWP with pressure. There are two wires coming from battery (on which this system is installed) through Push to on switch. When the switch is pressed then Pump will get on and supply water to BWP (at a time to six nos. plugs.) Please refer images. DM water tank: It is a 5 liters tank used to store dm water. The water feed Pump is mounted on this tank only. Blue Color PU Tubing. : We are providing tubing in continuous shape. And user needs to cut the tube as req. and installed in between two plugs. There is blue color PVC dead cap to use in extreme last plug. Please see photo for ref. Small Plastic Connector: This connector connects 4 mm PU pipe from Pump with 6 m PU pipe to BWP. Please refer images. Push to ON switch and wires: The push to ON switch and wires provides 12 v dc supplies to water feed pump. Please refer image. Other Instructions: The BWP is a low weight delicate, accurate, sensitive plastic moulded and assembled product. So handle it gently, do not apply very high manual pressure to fix in battery cell. Otherwise the top cover will get damage. Keep minimum distance in between DM water tank and Lead acid Battery. When you want to TOP up DM water then simply press and hold Push to ON switch. Now Pump will feed water to each BWP and the flow will become Zero when all Battery cells electrolyte level reaches to BWP float point. When you press switch again then as the electrolyte level is there so every BWP will not allow water into battery cell. Package Contents: Water Storage Tank Pipeline /Water tubes Feed water Pump End Plugs Battery watering Plug
This system contains below parts and its description is as below: Battery watering plug (BWP): This plug is made from polyprolene material. It will allow water inside only when the electrolyte level is below plastic float inside. Please note that this BWP will not work on gravity water pressure. It requires Minimum 10 psi water pressure for normal operation. Each BWP has one adaptor for easy fitting in 30 MM TYPE THREAD CELL VENT PLUG. ( there is one more adaptor for lift battery cell 35 mm push in type ) Water feeding pump: It is a 12 v dc windshield washer Pump required to pump and supply water to BWP with pressure. There are two wires coming from battery (on which this system is installed) through Push to on switch. When the switch is pressed then Pump will get on and supply water to BWP (at a time to six nos. plugs.) Please refer images. DM water Tank: It is a 5 liters tank used to store dm water. The water feed Pump is mounted on this tank only. Blue color PU Tubing. : We are providing tubing in continuous shape. And user needs to cut the tube as req. and installed in between two plugs. There is blue color PVC dead cap to use in extreme last plug. Please see photo for ref. Small Plastic Connector: This connector connects 4 mm PU pipe from Pump with 6 m PU pipe to BWP. Please refer images. Push to ON switch and wires: The push to ON switch and wires provides 12 v dc supplies to water feed pump. Please refer image. Other Instructions: The BWP is a low weight delicate, accurate, sensitive plastic moulded and assembled product. So handle it gently, do not apply very high manual pressure to fix in battery cell. Otherwise the top cover will get damage. Keep minimum distance in between DM water tank and Lead acid Battery. When you want to TOP up DM water then simply press and hold Push to ON switch. Now Pump will feed water to each BWP and the flow will become Zero when all Battery cells electrolyte level reaches to BWP float point. When you press switch again then as the electrolyte level is there so every BWP will not allow water into battery cell. Package Contents: Water Storage Tank Pipeline /Water tubes Feed water Pump End Plugs Battery watering Plug Auto Feed Water Control Unit
Quality Product : Lowest Price : Benefit to the end user : Battery watering plug (BWP): This plug is made from polyprolene material. It will allow water inside only when the electrolyte level is below plastic float inside. Please note that this BWP will not work on gravity water pressure. It requires Minimum 10 psi water pressure for normal operation. Each BWP has one adaptor for easy fitting in 30 MM TYPE THREAD CELL VENT PLUG. ( there is one more adaptor for lift battery cell 35 mm push in type ). Water feeding pump: It is a 12 v dc windshield washer Pump required to pump and supply water to BWP with pressure. There are two wires coming from battery (on which this system is installed) through Push to on switch. When the switch is pressed then Pump will get on and supply water to BWP (at a time to six nos. plugs.) Please refer images. DM water tank: It is a 5 liters tank used to store dm water. The water feed Pump is mounted on this tank only. Blue color PU tubing : We are providing tubing in continuous shape. And user needs to cut the tube as req. and installed in between two plugs. There is blue color PVC dead cap to use in extreme last plug. Please see photo for ref. Small Plastic connector: This connector connects 4 mm PU pipe from Pump with 6 m PU pipe to BWP. Please refer images. Push to ON switch and wires: The push to ON switch and wires provides 12 v dc supplies to water feed pump. Please refer image. Other Instructions: The BWP is a low weight delicate, accurate, sensitive plastic moulded and assembled product. So handle it gently, do not apply very high manual pressure to fix in battery cell. Otherwise the top cover will get damage. Keep minimum distance in between DM water tank and Lead acid Battery. When you want to TOP up DM water then simply press and hold Push to ON switch. Now Pump will feed water to each BWP and the flow will become Zero when all Battery cells electrolyte level reaches to BWP float point. When you press switch again then as the electrolyte level is there so every BWP will not allow water into battery cell. Package Contents: Water Storage Tank Pipeline /Water tubes Feed water Pump End Plugs Battery watering Plug Auto Feed Water Control Unit
O seal strip n 5.3 p/n: 1101300004 M15-1001-01B 58624P230018 HOSE ASSY VOLVO series dieselEngine Parts Diesel Filter Part * Diesel Filter P/N 26560145 filter SP-06*10 Cylinder liner piston accessories F-1300 cylinder liner gland MAGN.TERM.SIEM 3RV1021/1AA10 00A15C001.045 Flanged metal hose YZJR/100X18 51103-C WASHER, LOCK HI-COLLAR Ordinary nozzle JZS 4-10mm GLAND, ARMORED CABLE M614002989-03 WASHER, FLAT, REGULAR 50903-C Hydraulic anchor FZ 143.66*62mm TUBE ASSEMBLY, BRAKE 30171957 Hydrolyzed Polyacrylate Ammonium Salt NH4-HPAN Drilling Winch oil pump drive shaftParts ZJ-45 gear pump BD100 Multi-component copolymer JT888 Hydraulic tank accessories F-1600 spray pump 50008-44-C5 SCREW, CAP-HEX HD (UNC) Drilling rig top drive accessoriesDQ-LHTY solenoid valve circuit breaker 5SJ62 01.1.09 79832 ARMATURE BEARING UPPER GE TRANSMITTER 4-20MA, RTD 0-800 C, HOUSING N10250 Drill pipe power tong accessories ZQ203 small flange 125 19.1100-03 H15-3222-12 Reverse rotation pump turntable-J SB6Ã??8FJP SB68FJP0003 Trunk accessories ZJ32L6 Upper corner transmission box ZJ32/L6 VOLVOFM12 Universal*Front turn signal housing Z6001-CAN WIRE;LOCKING; 0.051";150FT Lubricator: Air Line 7811133 35Ã??70 BOP accessoriesFZ35-70 O-ring seal JK00213-31 Wellbore Stabilizer MFG-1 Silicone Wall Stabilizer Electric control box FKDQ640-7 AO module IB IL AO 2/SF-PAC Liquid end accessories SEV5320TGJ TPH400 oil guide ring 4-1/2" Jaw 3 1/2" (D=89 MM) complete with roller 01.01-18M of tong ZQ203-100 VOLVO series dieselEngine Parts Diesel Filter Part * Diesel Filter P/N 21040558 Air Filter Element, AF 25138M. CATERPILLAR C-15 Perforating Gun Accessories Vertically Oriented Perforating Gun Tip DX89D-27 Diesel generator set accessoriesC550D5 QSX15-G8 rocker arm 3100776 35*70 BOP accessoriesFZ35-70 Compression plug 11148.13 M10491 MAN33.430TGA chassis*input shaft oil seal 81965030475 NK400 lubricating* oil baseshell cushion HYDRO-PNEUMATIC ACCUMMULATOR, 6" 110562-2 M10500 35Ã??35 BOP accessoriesFH35-35/70 piston outer sealing surface FW1305.16-00 HTL pulse encoder module FEN-31 3AFE68978955 Roller shaft accessories ZJ-45Brake wheel net 106.02.25.00 65 B" REG left hand Pin x Pin swivel saver sub Power selection box accessory GJC40-17 hydraulic starter motor S60 LOCKWASH 25MM 86871-20 53000-8-S PLUG, EXT PIPE-CTSK HEX Drill pipe tong accessories ZQ203-100 support ring 0103-02M ND3128 Body chassis*Through shaft oil seal GT550E Transmission*Hydraulicfine oil filter element 35Ã??70 BOP AccessoriesFZ35-70 hinge seat JK00213-52 190 series diesel engineParts engine system * high temperature water chamber group 12VB.47.30A CLUTCH LT1168/305T, DRAWING NO: T014-018.00 BOLT M10X30-Q , CPTDC P/N: JC030808 Drill pipe tong accessories ZQ203-125 transfer cylinder seal assembly General test tool ball seat SQS 7" Winch drive shaft accessories ZJ-45 parallel axle II SLEEVE FOR HYD DISC BRAKE, MODEL: PSZ 75A, MAKE: HH, P/N: PSZ75A-2-13
Technical Parameters : Travel of X and Y Axes: 800x630 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1130x9500x300 mm; Maximum Work piece weight: 750 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 2200x1650x1910 mm; Approx. Machine weight: 2980 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters Travel of X and Y Axes: 500x400 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 850x540x300 mm; Maximum Work piece weight: 450 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 1790 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters Travel of X and Y Axes: 400x320 mm; Maximum cutting thickness: 300 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 mm. mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 620x480x300 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Numerical Control System: X8 ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1700x1300x2160 mm; Approx. Machine weight: 1480 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
Technical Parameters : Travel of X and Y Axes: 630x500 mm; Maximum cutting thickness: 350 mm; Wire diameter: Standard 0.18 mm; Optional: 0.12-0.2 m mm; Cutting Taper: 6 degrees (Plus and Minus 3 degrees)/ 80 mm Degree/mm; Work Table Size (LxWxH): 1020x640x350 mm; Maximum Work piece weight: 300 kg; Surface Roughness(Ra): "Cutting Condition: Straight line cutting and Height less than 40mm. One-time wire cutting, Ra: less than 2.3 um; Two-time wire cutting at same position, Ra: less than 1.6um; Three-time wire cutting at same position, Ra: less than 1.0 um. " u.m; Machining precision/Processing precision: "0.01. Multi time wire cuttings: Material=Cr12 and Height=40mm. Precision less than 0.006mm" mm; Positioning accuracy of X/Y axis: 0.03 (plus or minus 0.015) mm; Maximum cutting speed: More than 120 square mm/min; Numerical Control System: X8, HF SYSTEM or HL SYSTEM ; Display: Latest Version ; Serial Interfaces: USB port, RS 232C port, Ethernet port ; Remote control: With the function ; 3-D Graphical Preview: With the function ; Total machine power: 1.8 KV; Wire speed: 11.5 m/s; Minimum feed increment: 0.001 mm; Pulse width adjustable range: 15-150 us; Maximum power consumption: less than 2 KVA; Approx. Machine size (LxWxH): 1960x1620x2160 mm; Approx. Machine weight: 2200 kg; Approx. control cabinet size (LxWxH): 670x700x1100 mm; Approx. control cabinet weight: 100 kg.
