Slab size: 3200x1600mm / 3000x1400mm Thickness: 12mm / 15mm / 20mm / 30mm Net Weight Per Square Meter: 12mm - 29 kg/sqm 15mm - 36 kg/sqm 20mm - 48 kg/sqm 30mm - 72 kg/sqm Color: White Base with Dark Grey Veins Surface Finish: Polish / Matt / Leather Ingredient: Natural Quartz Grains + Unsaturated Polymer Resin Mohs Hardness: 7 Water Absorption: 0.04% Heat Resistance: 300 Application: Kitchen Countertops, Vanity Tops, Benchtop Surfaces Logo & Color: Customized
Cement Type I CPC ASTM C 150-92 Sold in Cement Carrier Port of origin, Pertigalete, Venezuela
Chemical Name: 2-Mercapto benzimidazole Molecular Formula:C7H6N2S Molecular Weight: 150.19 CAS NO: 583-39-1
Chemical Name: Tetramethyl thiuram disulfide Molecular Formula: C6H12N2S4 Properties: White or light gray powder (granule). The density is 1.29. Soluble in benzene, acetone, chloroform, CS2 partly soluble in alcohol, diethyl ether, CCI4 insoluble in water, gasoline and alkali with lower concentration. Meeting hot water becomes to dimethyl ammonium and CS2. Be sensitive to skin and peogaster Application: Can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and EV cure systems Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for EPDM. May be used as a retarder in the vulcanisation of polychloroprene rubber with ETU and also be used as bactericide and pesticide Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Chemical Name: N-Tertiarybutyl-2-benzothiazole sulfenamide Molecular Formula:C11H14N2S2 Molecular Weight:238.37 Quality standrad:HG/T2744-96 CAS NO:95-31-8 Properties: Gray white powder (granule). The density is 1.26-1.32. soluble in benzene, CS2, methyl alcohol, acetone. chloroform, alcohol, insoluble in gasoline, water, acid and alkali with lower concentration Application: Provides fast cure rate and high modulus development in NR, SBR, BR and blends. Normally used alone or with small quantities of ultra accelerators in tire compounds or industrial rubber products low poison and high efficiency. It is good back up for NOBS. Be regarded as standard accelerator Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.
Chemical Name:N-Cyclohexyl-2-benzothiazole sulfenamide Molecular Formula:C13H16N2S2 Molecular Weight:264.4 CAS NO:95-33-0 Properties: Gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. Soluble in benzene,boluene, chloroform, CS2, CH2Cl2 acetone, ethyl acetate, hardly soluble in alcohol, insoluble in water,gasoline, acid / alkali with lower concentration. Application: A medium fast primary accelerator suitable for NR, IR, SBR, NBR, HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing temperatures, causing no scorches. Vulcanized show excellent physical property and quick complete. Usually used alone when activated by DPG, TMTD and TS. Packaging: 25kg plastic woven bag, paper with plastic film bag, kraft paper bag or jumbo bag Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 1 year.
Chemical Name:2-Mercaptobenzothiazole Molecular Formula: C7H5NS2 Modular Weight: 167.25 CAS NO: 149-30-4 Properties: Slightly foul odor and bitter taste, nonpoisonous. Specific gravity: 1.46-1.52.Soluble in ethyl acetone, acetone, dilute solution of sodium hydroxide and sodium carbonate, ethyl alcohol. Not easily soluble in benzene. Insoluble in water and gasoline. Application: Used for NR, IR, SBR, NBR, HR and EPDM.One of the mainly used acidic accelerators currontly and a medium fast primary accelerator. Imparts excellent aging properties, when used both alone and in combination with DM,TMTD and many others, mainly basic accelerators for higher activity. But care should be taken because it has a slight tendency to scorch. Unsuitable for use in the manufacture of food contact materials. Mainly used in the manufacture of tires, tubes, footwear, rubber belts and hoses etc. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging:25kg bag.
Chemical Name: Dibenzothiazole disulfide Molecular Formula:C14H8N2S4 Properties: A little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than MBT. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging: 25kg bag.
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
- ADVANCED PERC CELL TECHNOLOGY: Based on M10-182mm wafer with multi-busbar Best choice for ultra-large power plants - MODULE TECHNOLOGY: Half-cut cell technology; High module efficiency; Low breakage rate; Annual power degradation 0.55% Less power loss by minimizing the shading impact - HOT SPOT LOSS: Optimized electrical design and lower operating current Reduced hot spot loss and better temperature coefficient. - FAST & SAFE: Easy installation and handling; Environmentally friendly - MODULE DURABILITY: Mechanical load test (withstand wind, snow, static or ice) up to 5400Pa; Ideal for PV rooftops, ground mount, floating - THE #1 DOMESTIC PV MANUFACTURER IN VIETNAM: 100% Automatic production line; International quality PV technology
Jute is another bast fiber similar to flax, ramie, bamboo, and kenaf. It is processed using a similar method - retting to rot away the unuseful parts of the plant, then drying and processing. It is an important historical fiber commonly produced in monsoon climates such as Bangladesh. It used to be used for coffee sacks, sandbags during World War 1 and for rope and cording. The fibers can be 3 to 13 feet long!
Robusta green coffee beans are known for their distinct flavor and higher caffeine content compared to their Arabica counterparts. These beans are sourced from the Coffea canephora plant and are often characterized by a strong, slightly bitter taste with earthy and nutty undertones. Robusta beans are prized for their resilience to pests and diseases, making them easier to cultivate in various climates. Their higher caffeine content contributes to a more robust and intense flavor, which is well-suited for espresso blends and instant coffee production. Robusta green coffee beans are a key component in many coffee blends, providing a bold and hearty character that appeals to those who prefer a stronger, more bitter coffee taste.
Arabica coffee beans are renowned for their exceptional flavor and aroma. These beans, native to the high-altitude regions of Central and South America, are prized for their mild, smooth, and nuanced taste. Arabica coffee is often characterized by its notes of fruit, floral, and even nutty undertones, making it a preferred choice for connoisseurs and specialty coffee enthusiasts. With a lower caffeine content compared to its counterpart, Robusta, Arabica beans are celebrated for their balanced acidity and overall superior coffee-drinking experience. Whether brewed as a single-origin or blended with other varieties, Arabica coffee beans consistently deliver a delightful and refined cup of coffee.
Canned fish items refer to seafood products that have been processed, cooked, and sealed in airtight containers, typically cans, to ensure preservation and longer shelf life. These products are convenient and widely consumed due to their accessibility and versatility. Common examples include canned tuna, salmon, sardines, and anchovies. Canning helps maintain the freshness and flavor of the fish while providing a convenient and ready-to-eat option for consumers. Canned fish is often used in various dishes such as salads, sandwiches, and pasta, making it a popular choice for quick and nutritious meals. Additionally, the canning process ensures that the fish retains its nutritional value, including essential omega-3 fatty acids and protein.
Canned vegetables are vegetables that have been processed, sealed in airtight containers, and then heated to destroy microorganisms, enzymes, and other potential contaminants. This canning process helps to preserve the vegetables, extending their shelf life and making them convenient for storage and transportation. Canned vegetables retain much of their nutritional value and can be a convenient and versatile addition to various dishes. They are available in a wide range of types, including beans, peas, corn, carrots, tomatoes, and more, providing a convenient option for those seeking quick and easy access to vegetables without the need for immediate refrigeration.