EAN Product code: PS000199 Trade name: PS000199.FOR Subaru XV (2018-2022) wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger. Environmental protection materials: ABS + PC Coil design: a large effect of a single coil Emission power: 15W / 10W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-143 KHz Input interface: power supply Charging mode: electromagnetic induction [wireless terminal] USB Installation location: central content box Wireless charging induction distance: less than 4mm Charging indicator: green is standby, blue is charging, red is foreign or abnormal Left and right steering wheel driving universal. Already passed through the CE FCC RoHS Product Size: 21 * 18 * 4cm Commodity weight: 0.27kg PC/CTN Support one product one generation order business More commodity specifications and preferential policies; welcome the letter to consult the business Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC. 5. Support QC3.0 fast charging protocol. 6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal. Step Price (FOB): 1. Sample unit price is USD110.40 2. 200set, USD66.24 3. 400set, USD59.62 4. 600set, USD53.66 5. 800set, USD48.29 Remarks: Free shipping charge for samples. More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EAN Commodity code: PSZ0196. Trade name: PSZ0196.For Ford Mustang (2015-2021) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level. Environmental protection materials: ABS + PC Coil design: a large effect of a single coil Emission power: 10W / 15W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-143 KHz Input interface: power supply Charging mode: electromagnetic induction [wireless terminal] USB Installation location: central content box Charging indicator: green is standby, blue is charging, red is foreign or abnormal Left and right steering wheel driving universal. Already passed through the CE FCC RoHS Product Size: 30 * 20 * 8 cm Commodity weight: 0.60kg PC/CTN Support one product one generation order business More commodity specifications and preferential policies; welcome the letter to consult the business Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC. 5. Support the QC3.0 fast charging protocol. 6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
EAN Product code: PSF2402 Trade name: PSF2402.For Ford Sharp world (2015-2018) wireless vehicle charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level. Environmental protection materials: ABS + PC Coil design: a large effect of the single coil Transmitting power: 15 W and 10 W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-205 KHz Input interface: power supply of the original cable connector Charging mode: electromagnetic induction [wireless terminal] USB Charging indicator: green is standby, blue is charging, red is foreign or abnormal Already passed through the CE FCC RoHS Size of goods: 31.5 * 24.5 * 7.5 cm Commodity weight: 0.80kg PC/CTN Support one product one generation order business More commodity specifications and preferential policies; welcome the letter to consult the business Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC. 5. Support the QC3.0 fast charging protocol. 6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
EANï¼? Product code: PSF2404 Trade name: PSF2404.For Ford Raptor F150 (2015-2018) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level. Environmental protection materials: ABS + PC Coil design: a large effect of the single coil Transmitting power: 15 W and 10 W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-205 KHz Input interface: power supply of the original cable connector Charging mode: electromagnetic induction [wireless terminal] USB Charging indicator: green is standby, blue is charging, red is foreign or abnormal Already passed through the CE FCC RoHS Size of goods: 31.5 * 24.5 * 7.5 cm Commodity weight: 0.80kg PC/CTN Support one product one generation order business More commodity specifications and preferential policies; welcome the letter to consult the business Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC. 5. Support the QC3.0 fast charging protocol. 6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal.
EAN Product code: PS000146 Trade name: PS000146.FOR Ford F150 (2015-2019) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger. Environmental protection materials: ABS + PC Coil design: a large effect of a single coil Emission power: 10W / 5W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-143 KHz Input interface: power supply Charging mode: electromagnetic induction [wireless terminal] USB Installation location: central content box Wireless charging induction distance: less than 4mm Charging indicator: green is standby, blue is charging, red is foreign or abnormal Left and right steering wheel driving universal. Already passed through the CE FCC RoHS Product size: 38 * 17 * 9cm Commodity weight: 0.59kg PC/CTN Support one product one generation order business More commodity specifications and preferential policies; welcome the letter to consult the business Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC. 5. Support QC3.0 fast charging protocol. 6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal. Step Price (FOB): 1. Sample unit price is USD110.40 2. 200set, USD66.24 3 400set, USD59.62 4. 600set, USD53.66 5. 800set, USD48.29 Remarks: Free shipping charge for samples. More categories of commodity specifications and preferential policies, welcome to letter message consulting business
EAN Product code: PS000162 Trade name: PS000162.FOR Ford Explorer (2020-2021) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger. Environmental protection materials: ABS + PC Coil design: a large effect of a single coil Emission power: 10W / 5W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-143 KHz Input interface: power supply Charging mode: electromagnetic induction [wireless end] USB Installation location: central content box Wireless charging induction distance: less than 4mm Charging indicator: green is standby, blue is charging, red is foreign or abnormal Left and right steering wheel driving universal. Already passed through the CE FCC RoHS Product Size: 24 * 14.5 * 3cm Commodity weight: 0.26kg PC/CTN Support one product one generation order business More commodity specifications and preferential policies; welcome the letter to consult the business Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC. 5. Support QC3.0 fast charging protocol. 6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal.
EANï¼? Product code: PSZ306 Trade name: PSZ306.For Porsche Cayenne (2018-2020) Wireless car charger. In line with QI wireless charging standards, compatible with multi-brand mobile phones, Bluetooth headphones, electronic watches, car keys and other electronic devices for automatic induction charging. Built-in fast charging chip, large coil configuration, higher charging efficiency, OEM quality level. Environmental protection materials: ABS + PC Coil design: a large effect of the single coil Transmitting power: 15 W and 10 W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-205 KHz Input interface: power supply of the original cable connector Charging mode: electromagnetic induction [wireless terminal] USB Charging indicator: green is standby, blue is charging, red is foreign or abnormal Already passed through the CE FCC RoHS Size of goods: 31.5 * 24.5 * 7.5 cm Commodity weight: 0.80kg PC/CTN Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silica gel to prevent mobile phone offset, environmental friendly material ABS + PC. 5. Support the QC3.0 fast charging protocol. 6.15W super-large coil, short-circuit protection, overcurrent protection. Connector cable installation, left and right steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light green is in standby state, blue is in charging, and red is in foreign body or abnormal. More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
EANï¼? Product code: PS000197 Trade name: PS000197.FOR Jeep Free Light / Cherokee (2019-2022) Wireless car charger. Built-in fast charging chip, large coil configuration, charging efficiency is higher. Compatible with multi-brand mobile phone models of special multifunctional wireless vehicle charger. Environmental protection materials: ABS + PC Coil design: a large effect of a single coil Emission power: 15W / 10W Conversion efficiency: 75% + Input parameters: 9-16V Output parameters: 5-9V Operating temperature: -20â?? + 70â?? Operating frequency: 110 KHz-143 KHz Input interface: power supply Charging mode: electromagnetic induction [wireless end] USB Installation location: central content box Wireless charging induction distance: less than 4mm Charging indicator: green is standby, blue is charging, red is foreign or abnormal Left and right steering wheel driving universal. Already passed through the CE FCC RoHS Size of goods: 31.5 * 10.5 * 6cm Commodity weight: 0.31kg PC/CTN Product auspicious feeling: 1. Wireless charger uses DC DC input. Built-in car standard level charging coil, compatible with a variety of mobile phone wireless charging. 2. A number of safety protection functions, in line with wireless charging standards, safe power and stable connection. 3. Constant temperature charging, reasonable control of working temperature, cold air cycle air intake design. 4. Nano anti-slip silicone, prevent mobile phone offset, environmental protection material ABS + PC. 5. Support QC3.0 fast charging protocol. 6.15W Very large coil, short circuit protection, overcurrent protection. Straight plug-in installation, the left steering wheel driving common. matters need attention: 1. Make sure that there is no debris on the charging pad. 2. Put the phone or other compatible device on the charging panel and indicate that the battery is charging when the blue indicator light is on; when the green indicator light is on, the battery is fully charged. 3. It is normal for the charging pad and the mobile phone to get hot. If you use the mobile phone (such as playing music) when charging, the charging pad and the mobile phone may become hotter. 4. Charging indicator light green is in standby state, blueis in charging, and redis in foreign body or abnormal. More categories of commodity specifications and preferential policies, welcome to letter message consulting business.
A 20-ton diesel forklift is a type of heavy-duty industrial forklift that is powered by a diesel engine and is capable of lifting loads weighing up to 20 tons. These forklifts are typically used in manufacturing, construction, and other industries that require the movement of large, heavy loads. They are known for their durability and power and often feature advanced features such as four-wheel drive, automatic transmission, and a variety of attachments to make them suitable for a wide range of applications. Due to the high power and heavy loads, they can handle they are required to be operated by trained and certified personnel. Features 1)Drive axle and braking system: The drive axle with a fully enclosed wet brake is adopted. The axle is an oil-cooled, hydraulically controlled handbrake. The axle housing has high strength and large bearing capacity, and at the same time fully considers the stress effect caused by the impact load of the vehicle under various complex and harsh working conditions, which is safe and has a long service life. The brake flushing system is equipped with a buzzer alarm for insufficient brake pressure, and protection devices such as the gearbox disengagement (indicator light) when braking. 2) Steering axle: The horizontal cylinder-type steering axle is used. Under working conditions, the forklift has sufficient steering force to control the steering of the forklift, so that the yaw and steering resistance of the wheels are small. The steering trapezoid design is reasonable, which can reduce tire wear. 3)Mast and frame: The wide-view gantry is used, which has high strength and rigidity, and will not deform under complex and harsh working conditions, prolonging the service life of the gantry and providing drivers with a good vision. The surface of the gantry rollers is specially treated for long-term anti-wear properties. 4)Cab: The cab is spacious and bright, with a wide field of vision. The inner seat and joystick are designed according to the ergonomic theory, and the operation is easy, flexible and comfortable. Weight-adjustable air pressure shock absorbers are installed under the seat. Combination instrument, beautiful appearance, small size, including steering column and steering wheel, and the steering wheel can be adjusted back and forth to provide spacious space for operation, inspection and maintenance. The standard air-conditioning system creates a comfortable working environment for the operator, and the standard reversing image provides the operator with a safe and standardized use environment. Learn more
In a proton exchange membrane fuel cell, the main function of the gas diffusion layer is to support the catalyst and provide a channel for the gas participating in the reaction and the water generated. It is one of the key components of the membrane electrode. The porous titanium plate has a good and uniform large number of pores, the porosity can be controlled by adjusting the diameter of the powder, and it is made of sintering, high temperature resistance and corrosion resistance. Product Parameters Color: Metallic Shape: Square plate, disc, can be customized Process: Powder sintering Fine filter: 1 m 65 m Material: Pure titanium Operating Temperature: 0 300 Thickness: 0.8mm 2.8mm Performance: Acid resistance, alkali resistance, high temperature resistance, breathable Features 1. Corrosion resistance It exists between the bipolar plate and the catalyst layer. During the electrochemical reaction, the high current density is 2A/cm2, which has high electrical corrosion resistance and must have corrosion resistance; 2. Porous air permeability Serve as a medium for hydrogen/oxygen or methanol/air to diffuse to the catalyst layer, and must be a porous and breathable material; 3. High conductivity To act as a current conductor, it must be a highly conductive material; 4. High thermal conductivity The reaction is an exothermic reaction, and overheating will cause damage to the proton exchange membrane. The gas diffusion layer must be a high thermal conductivity material to conduct heat away to avoid damage to the proton exchange membrane; 5. Good permeability Fuel cell reaction to generate water will cause performance degradation, so the gas diffusion layer must be able to export water and have high hydrophobicity; Due to its characteristics, porous titanium plates can also be used in the following industries: (1) Manufacture of sweating material. That is, the pores of ordinary powder metallurgy materials are impregnated with low-melting point substances, and they work at high temperatures At this time, the impregnation melts and seeps out, making the material "sweat" to dissipate heat. In this way, ordinary materials can be used to replace expensive heat-resistant alloys, and the service temperature of heat-resistant parts can be further increased. (2) Manufacture filter material. Used to filter gas, filtrate, and poison, etc. (3) Impregnated with the anti-friction agent to manufacture oil-containing and oil-free lubricated bearings; impregnated with spices to manufacture fragrance-containing handicrafts, etc. (4) Manufacture materials such as vibration reduction, noise reduction, and heat insulation.
The SUS 316L powder sintered small filter element is made of 316L powder pressed through a mold and then sintered at high temperature. It adopts its technology and strictly controls every step of the production process, including powder particle distribution, molding and sintering. It has high mechanical strength, high temperature resistance and corrosion resistance. The SUS 316L powder sintered small filter element has good, uniform pore size distribution, good air permeability, cleanable regeneration, weldable and mechanically processable, etc. By adjusting the powder particle size and process conditions, it is possible to produce porous metal sintered filter elements with a wide range of filtration accuracy. Product parameters Material: 316L, 304 Specifications: OD 8- 37mm Length 10-50mm Accuracy: 1-50 m Temperature resistance: 600 Maximum working pressure difference: 0.6Mpa Application Environment Nitric acid, sulfuric acid, acetic acid, oxalic acid, phosphoric acid, 5% hydrochloric acid, molten sodium, liquid hydrogen, liquid nitrogen, hydrogen sulfide, acetylene, water vapor, hydrogen, coal gas, carbon dioxide gas and other environments Product features 1. Good mechanical properties 2. Stable shape 3. Good air permeability 4. Good chemical stability, high temperature resistance, acid and alkali resistance, fire prevention and anti-static 5. High temperature resistance 6. Uniform bubbles, wide range of gas dispersion, no clogging Product applications 1. Catalyst recovery 2. Gas-liquid filtering and separation in the sectors of fermentation for environmental protection, medicine, beverage, food, metallurgy, and petroleum.3. Dust removal, sterilization and oil mist removal for various gases and steam 4. Noise reduction, flame resistance, gas buffer Craftsmanship The first step is to screen high-quality stainless steel 316L powder particles that meet the requirements according to the needs, and then use a custom-made mold for powder molding. After the molding is completed, put the product into a high-temperature vacuum furnace for sintering, and finally take it out for cooling and demoulding, and finally connect the interface by welding or riveting and then put into use. Filtration principle A sintered metal microporous filter element made of stainless steel is used to separate microscopic particles and filter a variety of materials. The interior is hollow and the wall thickness is uniform. The other end is open with one end shut.The material of the cylindrical cylinder wall is made of stainless steel sintered metal microporous material and make the function of filtration and separation.
A 20 ton diesel forklift is a type of heavy-duty industrial forklift that is powered by a diesel engine and is capable of lifting loads weighing up to 20 tons. These forklifts are typically used in manufacturing, construction, and other industries that require the movement of large, heavy loads. They are known for their durability and power, and often feature advanced features such as four-wheel drive, automatic transmission, and a variety of attachments to make them suitable for a wide range of applications. Due to the high power and heavy loads, they can handle they are required to be operated by trained and certified personnel. Features 1. Drive axle and braking system: The drive axle with a fully enclosed wet brake is adopted. The axle is an oil-cooled, hydraulically controlled handbrake. The axle housing has high strength and large bearing capacity, and at the same time fully considers the stress effect caused by the impact load of the vehicle under various complex and harsh working conditions, which is safe and has a long service life. The brake flushing system is equipped with a buzzer alarm for insufficient brake pressure, and protection devices such as the gearbox disengagement (indicator light) when braking. 2. Steering axle: The horizontal cylinder-type steering axle is used. Under working conditions, the forklift has sufficient steering force to control the steering of the forklift, so that the yaw and steering resistance of the wheels are small. The steering trapezoid design is reasonable, which can reduce tire wear. 3. Mast and frame: The wide-view gantry is used, which has high strength and rigidity, and will not deform under complex and harsh working conditions, prolonging the service life of the gantry and providing drivers with a good vision. The surface of the gantry rollers is specially treated for long-term anti-wear properties. 4.Cab: The cab is spacious and bright, with a wide field of vision. The inner seat and joystick are designed according to the ergonomic theory, and the operation is easy, flexible and comfortable. Weight-adjustable air pressure shock absorbers are installed under the seat. Combination instrument, beautiful appearance, small size, including steering column and steering wheel, and the steering wheel can be adjusted back and forth to provide spacious space for operation, inspection and maintenance. The standard air-conditioning system creates a comfortable working environment for the operator, and the standard reversing image provides the operator with a safe and standardized use environment.
Product Information Electrostatic discharge (ESD) is a common natural phenomenon. The effects of ESD on electrical and electronic equipments, devices or systems are everywhere. It is a very high degree of harmful electromagnetic energy. Only to improve the level of anti-static interference can ensure the safe use of electronic products. ESD genertor is used to evaluate the electrostatic immunity performance of electrical components and electronic equipments by simulating real We are also ISO9001 certified. Our self-developed electrostatic discharge (ESD) generator, electrical fast transient (EFT)/ burst generator, lightning surge generator, voltage dips simulator and so on have won a high reputation both at home and abroad. With the company's unique product support, application technology, system supporting capabilities and high quality service, we offer our users the most comprehensive testing program. Features 1> Fully compliant with latest Standards IEC/ EN 61000-4-2 2> User friendly 7 Touch Panel Display 3> Support multi-language & facilitate users 4> Built-in environment self-test program 5> Programmable operation 6> Pre-programmed IEC/ EN 61000-4-2 test settings 7> Very convenient to replace the dischaege modules to meet different standards of the test requirements 8> RS232/ USB port, PC control operation 9> Comfortable use and convenient operation Technical data 1> Model: ESD 20K 2> Standard: IEC61000-4-2, EN61000-4-2 3> Operation: 7â?� Touch Panel Display 4> Output voltage: 0.2~ ±20kV 5> Polarity: Positive/ negative/ alternating 6> Energy storage capacity: 150pF 7> Discharge resistor: 330Ω 8> Discharge current rise time: 0.6~1ns 9> The first peak current (±15%): 7.5A at 2kV/ 15.0A at 4kV/ 22.5A at 6kV/ 30.0A at 8kV 10> Current at 30ns (±30%): 4.0A at 2kV/ 8.0A at 4kV/ 12.0A at 6kV/ 16.0A at 8kV 11> Current at 60ns (±30%): 2.0A at 2kV/ 4.0A at 4kV/ 6.0A at 6kV/ 8.0A at 8kV 12> Holding Time (air discharge):5s 13> Discharge Modes: Contact Discharge & Air Discharge 14> Operating Modes: Single discharge & repetitive discharges 15> Discharge Trigger: Manual, automatic or remote 16> Working Mode: IEC level mode/ user mode/ program mode/ voltage rising patterns 17> Discharge Interval: 0.05~9.99s 18> Discharge Count: 1~9999
Butyl sealant is a kind of environmental friendly, non solidified self adhesive sealant. It can maintain its plastic and sealing properties without crack and harden in a wide temperature range. What's more, its excellent weather resistance, acid and alkali resistance, good air tightness and electrical insulation properties make it have good adhesion to glass, aluminum alloy, galvanized steel, stainless steel and other materials. And due to its extremely low water vapor transmission rate, butyl sealant with elastic sealant together can form an excellent anti moisture system. Butyl sealant is applicable for all kinds of machinery, pipe, glass installation, cable joints and other seals as well as buildings, water conservancy projects, etc. Specifications: Product name: butyl sealant. Material: isobutene polymer and butyl rubber blending. Color: black. Specific Gravity (g/m3): 1.10-1.30 g/m3. Operating temperature: -20 °C- 80 °C. Temperature resistant range: -40 °C - 130 °C. Maximum temperature bearable: 160 °C. Water vapor transmission rate: < 0.01 g/m2 per day. Solids content: 100%. Hot weightlessness: 0.1%. Shearing strength: 0.13 Mpa. Storage condition: -10 °C - 35 °C, in a cool, dry and ventilated place. Storage period: 12 months. Transportation: Butyl sealant is non dangerous, so it is suitable for all kinds of transport such as truck, train, boat and plane, etc. Note: When butyl sealant matches use with other rubber, compatibility test should be done. Features: Heat resistance. Strong adhesion. High air tightness. Weather resistance. Electrical insulation. Excellent sealing effect. Excellent UV resistance. Acid and alkali resistance. Can be reused and no waste. Environmental friendly material. Extremely low water vapor transmission rate. No solvent, no fog, non vulcanization, with permanent plasticity. need no curing period, saving floor area. (1 minute curing time). Applications: Butyl sealant is applicable for the building doors and windows glass, curtain wall, refrigerator, freezer, train and car, etc.
Equipment Agricultural Hot Sale Exhaust Fan for Poultry Farm Description 1. Exhaust fan blade is special designed for the biggest efficiency which made of Krupp stainless steel by punch forming. Large air volume, no deformation, no broken, no dust, attractive and durable. Thickness 1.2mm, surface finish BA grade. 2. Centrifugal system open the shutters at complete 90 degree to ensure the lowest air resistance and biggest air volume. When close, the sealing can efficiently block light and wind into the poultry farm house. As the first one adopt high quality nylon PA66 to ensure the long service life. The fasteners of centrifugal system all are copper rivets, wear-resisting and no rust, flexible. Guide rod is made of 304 stainless steel, ensure the high strength, no rust, reduce friction. 3. Frame adopts Hot Galvanized sheet with zinc thickness of 275g/m2, which extremely improve its anti-corrosion performance. Shutter fixed parts are made of high quality nylon which ensure long service life, open flexibly.Shutters are made of galvanized sheet with thickness of 0.8mm and 1.5mm, ensure shutters no deformation, running stable. There is also made of glass fiber reinforced plastics 4. Belts long service life, maintenance free. 5. Both China famous motor and Siemens motor are available. Motor voltage and frequency can be customized. Chinese famous motor OEM by special design for fan, the first put in the phase lack protection device which would power off when shortage of electricity. Motor protection grade IP55, insulation class F grade. 6. Fan belt pulley and flange are made of high strength aluminum-magnesium alloy by die-casting. Light weight, lower vibration. Blast-sanding treatment for attractive appearance, eliminate internal stress to improve its own rigidity and stability. 7. Motor plate fixed nuts, first change round type to hexagon type. And with stainless steel washer, more firmly, never loosen. 8. Fan side frame with plastic handle, easy to carry, convenient to load, reasonable design without injuring hands, beautiful appearance. 9. Linking parts are made of aluminum alloy,light weight,no deformation,added with wear-resistant shaft sleeve.Reducing friction to ensure the shutters open flexibly.The spring is made of 304 stainless steel,long service life,no deformation,no rust. 10. Fan bearing adopts imported double-row bearing with special waterproof design. High strength, low noise, free maintenance and long service life. 11. Fan blades are adjusted by intelligent dynamic-balance tester, the weight tolerance of each blade is controlled within 1g. Ensure the fan smooth running, lower vibration, less noise, increase stability. Blade material have stainless steel ,galvanized sheet, aluminum alloy for option.
Product Description 1. Calcium chloride is used as a refrigerating agent and antifreeze agent, can accelerate the hardening of concrete and increase the tolerance of building mortar.Used as a preservative.Used for the finishing and finishing of cotton fabric. 2. Calcium chloride is used as desiccant, dehydrating agent, refrigerant, air and automobile internal combustion engine, anti-freeze agent, antifreeze agent, fabric fire retardant, food preservative, etc. Product Application 1.Petroleum : Oil field drilling,stabilizing mud layar,lubricating drilling,making hole plug,fixing oil well. 2.Water treatment : Calcium ions can precipitate most anions.Chloride ions precipitate cations,and can also oxidize ions to purify wastewater. 3.Cryogen : Calcium Chloride solution is an important refrigerant for refrigerators and ice making. 4.Used for snow meltin and deicing on roads, expressways, parking lots and ports. 5.As fog removing agent and dust collecting agent on road, pot 6.As a dryer to dry nitrogen, oxygen, hydrogen, hydrogen chloride and sulfur dioxide etc. 7.As dehydration agent when producing alcohol, ester, ether and acrylic acid. 8.It can increase hardness of concrete and increase cold resistance ability of the construction. 9.As fireproof agent of textile ,coal mine. 10.As a protective agent and refining agent used in aluminum magnesium metallurgy. 11.As precipitator in producing lake paint. It is a kind of raw material of producing calcium salt. In algae sodium and bean industry it acts as flocculation
1. Product introduction: In geological and mineral experiments, PFA sample dissolving tanks are widely used. They are a multifunctional experimental tool, also known as dissolution cups, digestion bottles, vials, beakers, etc. These jars are suitable for low and medium pressure sample dissolution and digestion of experimental samples. When used with ICP-MS/ICP-OES analyzers, these jars improve the accuracy of trace-level analysis. In addition, these jars are designed with different bottom shapes according to experimental needs, such as U bottom, flat bottom and V bottom. If you need to use an electric hot plate or a digestion instrument with holes for experiments, you can get better results by combining it with a PFA sample dissolving tank. 2. Description: Specifications (ml): 3/5/6/7/15/22/30/40/60 Material: PFA Withstand temperature: -200-260 Suitable for sample pretreatment experiments for the analysis of dozens of elements in geological and mineral samples, such as: Mo, Ba, V, Si, Se, Li, Ga, Fe, Mg, Zn, Hg, K, etc. 3. Characteristics: 1. Translucent appearance, smooth inner wall, no water hanging on, easy to clean; 2. Temperature resistance: operating temperature -200~+260 (do not exceed 150 degrees under closed conditions); 3. Threaded port, excellent sealing, no air leakage; 4. Anti-pollution: low blank value of metal elements; 5. It has low dissolution and precipitation characteristics and is a container for storing standard substances and different reagents; 6. The cover and body can be numbered digitally without confusion; 7. The V-shaped bottom design facilitates the collection of small amounts of samples; the U-shaped bottom design is suitable for the detection of geophysical and geochemical samples. 4. Typical users: Isotope, geology and minerals, metallurgy, nuclear industry and other industries 5. PFA series products: Reagent bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes, etc.
product description: PFA, also known as Teflon, can be used for trace analysis, isotope detection, ICP-MS/OES/AAS analysis and other experiments. product features: 1. Seamless one-piece mold production technology, the product has stable performance and long service life; 2. Temperature resistance: The operating temperature is -200~+260â??. It can maintain its mechanical strength within a large temperature difference: from low temperature to high temperature, PFA can maintain its flexibility without losing toughness. Like PTFE, it is a carbon ammonia polymerization. Continuous use temperature of the object. 3. Easy to clean: PFA itself is non-stick and has the ability to waterproof, oil and other substances. The surface is flat and smooth without any scratches. It is easy to clean during use. 4. Threaded port, excellent sealing, no air leakage; can be coded 5. Anti-pollution: low blank value of metal elements; Parameters, usage Product name: PFA buffer bottle, reaction bottle, double-neck reaction impact bottle Material: PFA Specifications: 60.90.120.150.180.375m1 Temperature resistance range:-200-260C The lid is equipped with a 1/4 pipe. The pipe directly passes through the lid and is introduced into the body. It is convenient and flexible and can be used for buffer reaction experiments. scenes to be used: Semiconductor, chemical industry, biopharmaceutical, new energy industry. PFA series products: Reagent bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, flasks, dissolved samples, micro columns, crucibles, valves, joints, delivery pipes, etc.
One-time forming, adopting advanced technology from Germany, Korea and Italy, Perfect connection polyester yarn by high technology, Environment friendly raw materials /free of industrial waste. UV provides long lasting life, Decreases stretching when exposed to pressure. PVC Lay-flat hose is a tough water discharge hoses made with a PVC cover and reinforced polyester yarn. The high-tensile polyester yarn provides great durability and strength in all working situations. it is highly durable while maintaining great flexibility and best suited for low medium pressure applications. Application: PVC layflat hose is designed for light and heavy duty applications, the hoses are most commonly used in agricultural equipment where continuous water flow through irrigation systems is required. Additional uses include water pump, pool & spa, construction, mines and marine.For suck or discharge large flow air, water, dust, mud, or chemical solvent for agriculture irrigation, industrial water, construction, hardware, garden tools, etc. Our lay flat hose, made from PVC and reinforced with high-strength polyester fiber, offers numerous benefits over other types of hoses or water pipes. Because of the flat design, it's easily stored and moved from one area to another, and its flexibility allows for easy manipulation. This is one reason why our blue layflat hose is typically used as a supply line for connecting fire engines to hydrants. It's equally useful when used for irrigation, wastewater or sump pump discharge. This lay flat discharge hose is strong, durable and corrosion resistant. It's a popular choice for use in drip irrigating gardens as this hose can be easily pierced to provide drip holes. Construction: Tube: Extrude industrial grade PVC. Reinforcement: Reinforced with polyester yarn. Color available:black, grey, blue, yellow, red, etc Material: high strength polyester filament and high quality PVC. One step extrusion: Parted the threads regularly and molded by plastic coated once. Character: Acid & alkali resistant . aging resistant, stretching resistant, anti-wrinkle, non-toxic. Temperature range: -5C to +65 C
Stainless Steel Wire Mesh Panels Stainless steel wire mesh panels are sheets of woven or welded wire mesh made from high-quality stainless steel wire. They are commonly used in various industrial and commercial applications, including filtration, separation, protection, and decoration. Stainless steel wire mesh panels can be made from different grades of stainless steel, depending on the intended application. The most common grades of stainless steel used for wire mesh panels are 304, 316, and 316L, which offer high resistance to corrosion and oxidation. The wire mesh panels can be produced in various sizes, shapes, and mesh configurations, depending on the specific requirements of the application. They can be cut to size and shape to fit a specific area or application, or they can be purchased in standard sizes. Stainless steel wire mesh panels offer several benefits, including high strength, durability, and resistance to rust and corrosion. They are easy to clean and maintain, making them ideal for use in harsh environments. Additionally, they offer excellent visibility and air flow, making them suitable for use in a range of different applications. Material: Common material: SUS201, 304, 304L, 316, 316L, 431, 321 stainless steel wire Special material: 410/430, 310S, 904L stainless steel wire UNS S31803(S32205) duplex stainless steel wire UNS S32750 Super duplex stainless steel wire Weaving type: Plain weave, twill weave, dutch weave and reverse dutch weave etc Mesh counts: Plain/Twill weave:2-635mesh Dutch weave:12*64-500*3200 mesh Characteristic: Acid-resisting, alkali-resisting, heat resistant and anti-corrosion. Smooth surface, high filtering precision, can load high strength.