JOEO Salt spray testing equipment Produce artwork with salt spray chambers heating adopts titanium alloy electric heating tube. It has high corrosion resistance and long service life is 3-5 years higher than ordinary stainless steel heating tube. Cover is made of 5MM imported transparent (Germany YLIS) acrylic sheet. It has fine workmanship, beautiful appearance and high transparency.
Admiralty Brass Tubes For Evaporators &Amp; Coolers STANDARD: BS, ASTM, DIN, JIS, IS Product Application Areas: Heat Exchangers, Refineries, Power Plants, Desalination Plants, Ship Building & Ship Repairs, Condensers, Ferrules and Distillers. Characteristic: A Copper Zinc Alloy containing tin and small amount of Arsenic, which is added as an inhibitor against dezincification. The pressure of Tin imparts to the alloy good corrosion resistance in a moderately polluted river water and clean seawater, either stagnant or slow moving (up to about 2 meters/sec.). The most common and wrought form is tube for heat exchange equipment. Guide to the selection of tube material: Clear River, Lake or Canal Water. a. Dissolved salts more than 2000 ppm.b. Chloride less than 20 ppm.c. H2S and Ammonia is less than 1 ppm.d. Suspended solids less than 25 ppm.e. For temperature more than 2000C and less than 4500 C.Permissible average velocity of water 1.8-2.0 meters/sec.
Product Name: Chromite Ore Chemical Formula: FeCrO (Iron Chromium Oxide) Origin: Balochistan, Pakistan Description: Chromite is a high-grade natural ore containing chromium and iron, crucial for the production of stainless steel, ferrochrome, and various industrial alloys. Sourced from the rich mineral deposits in Balochistan, Pakistan, our chromite is known for its high purity, consistent quality, and reliable performance in a wide range of industrial applications. Key Features: High Chromium Content: Our chromite ore boasts a high concentration of chromium (typically 45-55%), making it an excellent choice for producing high-quality ferrochrome, which is essential in the manufacturing of stainless steel and other corrosion-resistant alloys. Purity and Quality: The ore is carefully extracted and processed to ensure minimal impurities, such as silica and alumina, which can affect the efficiency of smelting operations. Metallurgical Properties: Balochistan chromite is valued for its favorable smelting characteristics, including its ability to produce a stable and high-grade alloy with optimal recovery rates of chromium during the smelting process. Applications: Ferrochrome Production: The primary use of chromite ore is in the production of ferrochrome, an essential component in the manufacture of stainless steel. Refractory Material: Due to its high melting point and stability, chromite is used as a refractory material in high-temperature furnaces, kilns, and incinerators. Chemical Industry: Chromite is utilized in the production of chromium chemicals, including chromium salts and oxides, which are used in pigments, metal plating, and leather tanning. Foundry Sands: The high heat resistance of chromite makes it suitable for use as a molding sand in foundry applications. Physical Characteristics: Color: Typically metallic black or brownish-black. Hardness: 5.5 on the Mohs scale, indicating good durability. Specific Gravity: 4.5 to 4.8, reflecting its high-density nature. Grades and Specifications: CrO Content: Typically 45-55% SiO Content: Low levels, generally under 5% AlO Content: Less than 10% Size: Available in various sizes, from fine particles to larger lumps, depending on customer requirements. Quality Assurance: Our chromite ore undergoes stringent quality control measures to ensure it meets international standards. The ore is tested for its chemical composition, size distribution, and physical properties to guarantee optimal performance in end-use applications. Packaging and Delivery: Available in bulk shipments, bagged loads, or custom packaging to suit client needs. We ensure secure packaging and timely delivery to locations worldwide. Availability:
ECO 9MM SNOW CHAINS ECO 9mm snow chains with D3x2.5mm section are ideal for cars with tight clearance. Front-wheel drive and rear-wheel drive are both suitable. TUV/GS & ONORM V5117&EN16662-1 approval. BRAND: SURECHAIN ECO 9MM SNOW CHAINS SPECIFICATIONS Size D3X2.5mm Material Case-hardened high-quality alloy steel Pattern Symmetrical diamond pattern chain Use Easy and light to mount and demount Performance Satisfactory traction 9MM VS 12MM SNOW CHAINS When it comes to choosing between 9mm snow chains and 12mm snow chains, there are a few things to consider. Firstly, the main difference between these two sizes is the thickness of the chains. 9mm snow chains are generally considered to be "light-duty" chains, suitable for occasional use in light snow and ice conditions. They are lighter and more compact than 12mm chains, making them easier to store and install. 12mm snow chains, on the other hand, are considered to be "heavy-duty" chains, suitable for more frequent use in heavier snow and ice conditions. They provide better traction and durability than 9mm chains, but they are also heavier and bulkier, making them more difficult to install and store. When choosing between 9mm snow chains and 12mm snow chains, it's important to consider the conditions in which you will be driving. If you only anticipate needing chains for occasional use in light snow, 9mm chains may be sufficient. However, if you expect to be driving in more severe winter conditions or on steeper roads, 12mm chains may be a better choice. Ultimately, the best choice of quality snow chains will depend on your specific needs and driving conditions. It's important to carefully consider your options and choose to buy car chains that will provide the best combination of traction, durability, and ease of use.
CUSTOM GRAPHITE CRUCIBLE FOR MELTING GOLD/ SILVER/ ALUMINIUM/ COPPER/ BRASS Graphite crucible for melting gold/silver/aluminium/copper/metal uses graphite as the main raw material and plastic refractory clay or carbon as binder processing. This kind of graphite crucible for melting copper is mainly used for gold, silver, copper, aluminum, brass and other non-ferrous metal and alloy smelting. Graphite crucible's wall is smooth and the melting loss of precious metals is small. HOW TO USE GRAPHITE CRUCIBLE FOR MELTING GOLD/ SILVER/ ALUMINIUM/ COPPER/ BRASS Graphite crucible is most afraid of damp, damp after the quality has a great impact, if the use of damp crucible will be broken, burst, off the bottom and other phenomena, resulting in the loss of molten metal, and even industrial accidents. So graphite crucible in storage and use process, must pay attention to moisture-proof. ADVANTAGES OF GRAPHITE CRUCIBLE FOR MELTING GOLD/ SILVER/ ALUMINIUM/ COPPER/ BRASS 01 Graphite crucible for melting silver has the characteristics of high temperature resistance, strong thermal conductivity, good corrosion resistance, long service life and so on. In the process of high temperature, the coefficient of thermal expansion is small, and it has certain strain resistance to rapid cooling and rapid heating. 02 Graphite crucible for gold/silver/aluminium/copper/brass has strong corrosion resistance to acidic and alkaline solutions and excellent chemical stability. It does not participate in any chemical reaction in the smelting process. As one of graphite products suppliers, we can provide kinds of graphite products for sale, if you are interested, please contact us.
We understand the technicalities of working with copper, a softer metal than steel, and one that requires some extra skill in fabricating busbars. With our prototyping capability, we can usually provide samples of busbar, copper busbars and electrical busbar for evaluation. Our copper also finds numerous uses in electrical industries. Some of the properties of copper used in this application are listed below - Copper Alloy No. Temper Desi. Thickness Tensile Stren. (N/ mm2) Hard ness HV Bend Test Over Upto & incl. Transverse Longitudinal C-1100 Annealed 0.5 mm 10 mm 210 Angle Radius Angle Radius Half Hard 0.5 mm 2.0 mm 240 55max 180 Close 180 Close Half Hard 2.0 mm 10.0 mm 240 70-95 180 - 180 - Hard 0.5 mm 2.0 mm 310 70-95 180 - 180 - Hard 2.0 mm 10.0 mm 290 90min 90 - 90 - 90min 90 - 90 Chamfering Radius Thickness Chamfering Radius 2mm (min) / 5mm (max) 0.8 5mm (min) / 8mm (max) 1.2 8mm (min) / 30mm (max) 1.6 Physical Properties No. Temper Description. Conductivity % (20C) C1100 0 C1100BB-0 100% (min) 1/4H C1100BB-1/4H 95% (min) 1/2H C1100BB-1/2H 98% (min) H C1100BB-H 97.16% (min) Chemical Properties No. Purity Oxygen Content. Cu PPM C11000 99.90 (min) Upto 250 ppm
