Pneumatic valve is a valve driven by compressed air. When purchasing pneumatic valves, only the specification, type and working pressure are specified to meet the purchase requirements, which can be used to control the flow of air, water, steam, various corrosive media, mud, oil, liquid metal, radioactive media and other types of fluids. Sudhanafluid pneumatic valve series: butterfly valve The butterfly plate of the butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical channel of the butterfly valve body, the disc-shaped butterfly plate rotates around the axis and the rotation angle is between 0 �° and 90 �°. When it rotates to 90 �°, the valve plate is fully open. The butterfly valve is simple in structure, small in size, light in weight and only composed of a few parts. It can be opened and closed quickly by rotating 90 �°, and the operation is simple. At the same time, the valve has good fluid control characteristics. When the butterfly valve is in the fully open position, the thickness of the butterfly plate is the resistance when the medium flows through the valve body, so the pressure drop generated by the valve is very small, so it has good flow control characteristics. The butterfly valve has two types of seal: elastic seal and metal seal. Elastic sealing valve, the sealing ring can be embedded on the valve body or attached to the periphery of the butterfly plate. Valves with metal seals generally have a longer service life than those with elastic seals, but it is difficult to achieve complete sealing. Metal seal can adapt to higher working temperature, while elastic seal has the defect of being limited by temperature. If the butterfly valve is required to be used as flow control, the main thing is to select the correct size and type of valve. The structural principle of butterfly valve is particularly suitable for making large-diameter valves. Butterfly valves are not only widely used in oil, gas, chemical, water treatment and other general industries, but also used in cooling water systems of thermal power plants. The commonly used butterfly valves include wafer butterfly valve and flange butterfly valve. Wafer butterfly valve is to connect the valve between two pipe flanges with stud bolts. Flange butterfly valve is to connect the flanges on both ends of the valve to the pipe flange with bolts.
Single-acting/double-acting pneumatic actuator. Size standard: NAMUR standard, ISO5211 standard. Cylinder material: die-cast aluminum. It can be equipped with solenoid valve, limit switch and positioner. Air source pressure 2-8 bar. Applicable occasions: indoor or outdoor installation. Available valves: ball valves, butterfly valves, plug valves. Installation method: any position, 360-degree rotation.
Wenzhou Sudhanafluid JAT type aluminum alloy piston pneumatic actuator bolt 304 stainless steel Ball Valve Butterfly Valve Double Acting Pneumatic Actuator Pneumatic actuators are widely used in ball valves and butterfly valves. Low cost, compact structure and long service life. Pneumatic actuator type: single acting (spring return) or double acting. Color: Orange, Blue, Black, Dark Gray. We accept OEM colors and brands. Pneumatic actuator working pressure: 4~8bar Bottom connection: iso5211 Solenoid valve standard: Namur Pneumatic actuator accessories: limit switch box, solenoid valve, positioner.
Applicable fluid medium: water, air, oil, corrosive chemical liquid For example: piping systems for pure water and raw drinking water, drainage and sewage piping systems, salt water and sea water piping systems, Acid-base and chemical solution systems and other industries. Body material: UPVC Transmission mode: electric; 90 angular stroke rotary electric drive Actuator material: cast aluminum alloy/plastic shell Protection device: overheating protection Action time: 4-30 seconds Nominal pressure: 1.0Mpa Nominal diameter: DN15-200 Protection level: IP65 Fluid temperature: -15�°C - 60�°C (no freezing) Ambient temperature: -25�ºC-55�ºC Power consumption: 8VA-30VA Installation method: installation at any angle (horizontal installation is best for prolonging life) Power supply voltage: standard AC220V, optional DC24V, AC110V Voltage tolerance: ±10%, DC tolerance ±1% Connection method: internal thread, bonding (welding), flange, double union
Pneumatic Sanitary Ball Valve Overview: Pneumatic sanitary ball valve (quick-installation ball valve) is a sanitary valve that meets high-standard manufacturing standards. It is usually connected to the pipeline by a card box and quick-installation method. It can be more convenient for dry disassembly, maintenance and cleaning. Pneumatic sanitary ball valves are made of SUS304 and 318L stainless steel materials. The inner and outer surfaces have been polished and sterilized, and have undergone precise inspection procedures and strict quality management. They can meet the needs of wine, food, biopharmaceutical and other industries. special requirements. The pneumatic sanitary ball valve adopts the all-inclusive F4 seal, which is easy to clean without any dead ends, and has no individual accumulation area. It is completely clean and meets the standards of food hygiene. Pneumatic Sanitary Ball Valve Features: 1. The pore size of the pneumatic quick-loading ball valve is consistent with that of the pipeline, and the surface is smooth without dead ends, and no sediment will be generated; 2. The inner wall of the flow channel is polished and sterilized to fully meet the sanitary standard; 3. Pneumatic sanitary ball valve adopts all-inclusive fluorine-lined (PTFE) sealing form, there is no dead angle and easy to clean: 4. Pneumatic quick-loading ball valves are all made of stainless steel, and the inner wall of the flow channel is 0.5um electronically polished to keep the fluid unimpeded. Application of Pneumatic Sanitary Ball Valve: Pneumatic sanitary ball valves are equipped with solenoid valves, travel switches and other related accessories, which can be used for remote automatic control, and can also be equipped with valve positioners to input 4-20mA signals according to the needs of working conditions, so as to adjust the quality of the pipeline, and the pneumatic hygiene The inner wall of the ball valve is long and smooth, no dead angle, seamless, automatic exhaust and other channels, and it is also very suitable for the needs of cleaning in place. It is widely used in food, sour wine, beverages, dairy products, fine chemical pharmaceuticals and biological engineering, etc. Many industries.
Overview of pneumatic regulating ball valve: According to the structural form, the pneumatic regulating ball valve can be divided into pneumatic O-type regulating ball valve or dynamic V-type regulating ball valve. It is mainly used with the valve positioner to make a press signal according to the input and output 4.20mA, so that Control the rotation opening of the ball valve valve. To achieve the proportional adjustment of pipeline medium pressure, flow rate, liquid door and other parameters, among them, the pneumatic/type adjustment glass closure has knotted and removed shape objects (throwing gaps, which can adjust the flow rate according to the change of the opening area in the middle of the field, and can cut off the fluid Closed by impurities contained in the medium, suitable for the control of pulp, mortar, viscous fluid, Pneumatic regulating ball valve principle: The pneumatic regulating ball valve uses compressed air as the driving force to drive the ball flower to rotate back and forth, so as to achieve the opening and closing of the valve. Size, to achieve different degrees of proportional adjustment to the medium flow. When the pneumatic actuator receives the signal from the control system, it generates a corresponding thrust according to the size of the control force, and pushes the adjustment mechanism to drive the valve core to move, and completes the flow and pressure adjustment of the medium in the pipeline. It has a large rated flow coefficient. , good sealing effect, adjustable performance, etc.
Brief introduction of pneumatic three-way ball valve: Pneumatic three-way ball valve is used for medium reversing, confluence and diversion in pipelines. It is mainly composed of T-type or L-type three-way ball valves connected with pneumatic actuators. According to different connection methods, it can be divided into flanges and internal threads. Pneumatic three-way. type ball valve is to switch or store the flow direction of two mutually perpendicular channels, and achieve the distribution function, while the T-type ball valve can not only switch the flow direction of the material, but also make the three channels Interconnect or close any one of the channels to play the role of diversion and confluence. According to the needs of T conditions, a valve positioner and other related accessories can be installed on the pneumatic one-pass valve liner to control the operation of the ball valve core. Achieve automatic control of the medium in the pipeline. Advantages of pneumatic three-way ball valve: 1. Different connection forms can be selected, which are divided into pneumatic flange three-way ball valve and pneumatic thread three-way ball valve to meet different working conditions. 2. Sealing effect, the elastic deformation of soft seal tetrafluoroethylene can achieve leak-free sealing. 3. One valve with multiple functions: it can be made into an L-shaped port or a T-shaped port to achieve functions such as distribution, confluence, and diversion. 4. The pneumatic three-way ball valve is easy to install, and any port can be used as the flow inlet of the medium, and there is no leakage 5. It is widely used in environmental protection, oil products, metallurgy, steam, energy, papermaking, food and other pipeline systems to change the flow direction of the medium or achieve the separation or mixing of the medium. Pneumatic three-way ball valve standard specification: 1.Design and manufacture: GB/T12237-1989; API608. 2.Inspection and test: GB/T13927-1992; API598. 3.Flange connection: JB/T79]-2-1994; ASME/ANSIB165. 4. Structure length: JD-2002 Response device: also called limit switch, remote feedback switch signal (explosion-proof) Solenoid valve: choose two-position five-way for double action, two-position three-way for single action (explosion-proof) Triple piece: It can stabilize the air source, filter, and add lubricating oil to the cylinder Valve positioner: Input 4~20mA signal to realize valve adjustment function YT-1000R
Explosion-proof electric ball valve overview: The electric explosion-proof ball valve is mainly composed of an explosion-proof actuator and a ball valve. It is an electric explosion-proof valve used in flammable and explosive conditions. The electrical components on the explosion-proof electric ball valve are required to be fire-proof and anti-static, and all meet the explosion-proof standards. The explosion-proof grade is ExdIIBT4 (CT6), and the protection grade is IP87. The electric explosion-proof ball valve can control the valve switch by inputting the relevant power signal, and can control the operation of the ball valve by inputting the 4-20mA signal and 220/power supply for proportional adjustment, so as to achieve the automatic control of the medium flow, pressure, temperature and other parameters in the pipeline. Applied to explosion-proof occasions such as natural gas, sewage, gas, coal mine, chemical industry, etc. EXDIICT4 grade explosion-proof electric ball valve Explosion-proof electric ball valve features: Explosion-proof Shendong modified valve means that the curved heat actuator of the ball valve h meets the explosion-proof standard. It is used in places requiring explosion-proof, such as liquid or gas (inflammable and explosive places in the chemical industry, used to open and close the valve. Or section, explosion-proof valves can be divided into intrinsically safe type and explosion-proof type. The intrinsically safe type uses a DC motor, and the explosion-proof type uses an AC motor. control, and can also be operated on site. Electric explosion-proof ball valve standard specification: 1. Design and manufacture: GB12237-89, API608, API 6D, JPI7S-48, BS5351, DIN3357. 2. Flange size: JB/T74~90 (JB74~90), GB9112~9131, HGJ44~76, SH3406, ANSI B16.5, JIS B2212~2214, NF E29-211, DIN2543. 3. Structure length: GB12221-89, ANSI B16.10, JIS B2002, NF E29-305, DIN3202. 4. Inspection main test: JB/T9092, API598.
Overview of electric high platform ball valve: The electric high platform ball valve adopts a high platform design, which can be directly installed with the actuator without the need for a bracket, which provides convenience for product installation and replacement, and has the characteristics of small flow resistance and large flow capacity. The difference between the electric high platform ball valve and the ordinary ball valve with bracket is that it occupies a small space and has a compact structure. The disadvantage is that it is not resistant to high temperature, and the temperature is transmitted to the cylinder, and the rubber ring in the cylinder is easy to age. Although the ordinary ball valve and the actuator need to be installed with a bracket and a connecting shaft, the heat dissipation function is stronger. Usually, the pipeline with a high temperature usually adopts a ball valve with a bracket, which can avoid damage to the actuator due to high temperature and prolong the service life. service life. Electric high platform ball valve features: 1. It adopts high platform ISO5211 standard design, and it can be connected and installed with the actuator without other brackets and connecting shafts. 2. It adopts silica sol precision casting, beautiful appearance, tight and reliable, good sealing performance and wide application range. 3. Anti-static function, a spring is set between the ball, valve stem and valve body, which can discharge the static electricity generated during the switching process. 4. The fluid resistance is small. The full-bore ball valve basically has no flow resistance, and the opening and closing is rapid. It only needs to rotate 90�° from fully open to fully closed, and it is easy to operate. The electric high platform flanged ball valve adopts the spring plunger type electrostatic lead-out device, so that the direct form of static passage between the ball and the valve body or the form of static passage between the ball and the valve body through the stem tube, so that the ball and the valve seat can be The static electricity generated by friction during the switching process is led to the earth through the valve body, preventing fire or explosion that may be caused by static sparks. Static electricity is an objective natural phenomenon, which can be produced in many ways, such as contact and friction. For example, for high platform ball valves, when the ball rubs against the soft-sealed switch, static electricity will be generated. If the pipeline is filled with flammable and explosive media, it is very dangerous. Therefore, a connecting device is installed in the valve to guide the static electricity of the ball to the outside to prevent static electricity. is very important.
Overview of electric three-piece ball valve: The electric three-piece ball valve (electric internal thread ball valve) is assembled from three parts: the left and right valve casings and the middle valve body. Four longer bolts traverse the three-section valve casing, and tightly clamp the middle valve body from both ends. The biggest advantage of the electric three-piece ball valve is that it is particularly easy to disassemble. When the valve fails or needs to be repaired, it is not necessary to disassemble the thread of the pipeline, but the four-piece ball valve can be taken off directly, and the body part can be taken out. It not only reduces the probability of failure, but also improves the working efficiency. It is especially suitable for working conditions with small mechanical volume and narrow space. Electric three-piece ball valve principle: The three-piece electric ball valve has reliable sealing performance and high pressure. Its action principle is to drive the valve core to rotate 90 degrees through the power supply voltage of the electric actuator to open and cut off the medium. It can be designed as The two-position switch control of the medium can also realize the proportional adjustment of the medium flow, pressure, temperature and other parameters in the pipeline. Electric three-piece ball valve standard specification: Test inspection: API598, EN12266 Threaded end: ASME B1.20, BS21 DIN2999/259, BSP ISO7/1, ISO228/1 JIS B 0203 Butt weld ends: ASME B16025 Sleeve Welding Ends: ASME B16.11 Flange connection: ASME B16.5 DIN2542~2545 JIS B2238 Classification and difference of electric chip ball valve: The movable one-piece ball valve is one-piece, and the ball is fixed by a plug, which facilitates its maintenance and can be used in working conditions that require quick opening and quick closing. The electric two-piece ball valve is composed of two parts, which are fixed by two pieces of valve bodies clamping the ball. The maintenance is relatively complicated. The tightness of the middle screw is related to whether there will be air leakage, The electric three-piece ball valve is similar to the two-piece ball valve. It consists of left and right end covers and a middle valve body, and then enters the sheep clamp with necks on both sides. Its pressure is higher than that of the other two types.
Glass for lighting, glass for electronic parts / precision equipment, glass fiber, glass for medical/science/analysis, aluminum raw materials, alumina balls, white silica, aluminum hydroxide, pp, pc, abs, pmma, pom, silicon metal, silica sand/quartz, calcium carbonate, acrylic sheet, cassava t shirt bag, cassava griphole bag.
Tassel like fabric beads stones.
Tassel like fabric beads stones.
Yellow Color Triangle Mirror Keychain With Cheed and Kodi Work, Keychain Contains Sewing thread and Cotton thread. It is also used for Earings. Customizations are also available for the purpose of changes in keychain Colour and others as per customer\'s requirements. SKU: SO-16 PRICE: 48
Hanging Mirror with Colorful Pompom, Pompom Contain with Colorful Thread, Work on as a home decoration, Customizations size and color also Available and other as per customers requirement. SKU : SO-20 PRICE : 400
Ocean Pocket Mirror with Small Tassel, Thread and beads Contain Cotton Thread, Work on as a cup or Mug Stand, It is also used as a Gift Item, Customization sizes and colors are also available and other as per the customer\'s requirement. SKU : SO-24 PRICE :100
Hanging Mirror with Colorful Pompom, Pompom Contain with Colorful Thread, Work on as a home decoration, Customizations size and color also Available and other as per customers requirement. SKU : SO-20 PRICE : 400
Cowrie shell Kodi and Rudarkash Keychain With Cheed and Thread Work, Work on Keychain is Cheed and Polyester thread, It is also used for Earings. Customizations are also available for the purpose of changes in keychain Colour and others as per customer\'s requirements. Multicolor Mirror Keychain with Colorful Tassels, Tassels Contain Cotton Thread, Work on Keychain is Cheed and polyester thread, It is also use for Earings. Customizations are also available for the purpose of changes in keychain Colour and others as per customer\'s requirement. SKU : SO-09 PRICE : 70
Cowrie shell Kodi Keychain With Cheed and Thread Work, Work on Keychain is Cheed and SWEING thread, It is also used for Earings. Customizations are also available for the purpose of changes in keychain Colour and others as per customer\'s requirements. SKU : SO-19 PRICE :
Yellow Mirror pocket purse, Thread and beads Contain Cotton Thread, Work on as a cup or Mug Stand, It is also used for as a Gift Item, Customization sizes and colors are also available and others as per customer\'s requirements. SKU: SO-23 PRICE : 100
