Incoloy Alloy 926 is a super-austenitic nickel-based alloy with high levels of molybdenum, nitrogen, and chromium. It is known for its excellent corrosion resistance in a variety of challenging environments, including sulfuric acid, hydrochloric acid, and seawater. Here is a detailed introduction to Incoloy Alloy 926 and its applications: Incoloy alloy 926 is a super-austenitic nickel-based alloy with high corrosion resistance and excellent mechanical properties at high temperatures. It has a chemical composition of 22% chromium, 25% molybdenum, 6% tungsten, and 0.5% nitrogen, with nickel and iron making up the balance. The alloy also contains small amounts of copper and titanium. Incoloy alloy 926 is known for its excellent resistance to a wide range of corrosive environments, including chloride ion stress-corrosion cracking and pitting and crevice corrosion. It also has good resistance to sulfuric acid and phosphoric acid, as well as seawater and brine solutions. The alloy's high nickel and molybdenum content provides excellent resistance to reducing environments, while its chromium content enhances its resistance to oxidizing environments. In terms of mechanical properties, Incoloy alloy 926 exhibits high strength and toughness, along with excellent weldability and formability. It can be fabricated using a variety of techniques, including hot and cold working, machining, and welding. Due to its excellent corrosion resistance and mechanical properties, Incoloy alloy 926 is commonly used in a variety of industries, including chemical processing, oil and gas, nuclear, marine, and desalination. It is often used in applications involving sour gas environments, such as in the production of oil and gas, as well as in heat exchangers, pressure vessels, and piping systems. The international standards and specifications for Incoloy alloy 926 are as follows: United States: ASTM B649, AMS 5737, AMS 5853, UNS N08926 Europe: EN 1.4529, SEW 400 Germany: DIN 17752, DIN 17754, DIN 17750, W.Nr. 1.4529 We can provide the following the form:Incoloy alloy926 coil; Incoloy alloy926 strip;Incoloy alloy926 plate; Incoloy alloy926 sheets; Incoloy alloy926 tube; Incoloy alloy926 pipe;Incoloy alloy926 flat; Incoloy alloy926 bar BS:NA 25/JIS:SUS 890L/UNS:N08925/W.Nr:1.4529
Incoloy Alloy 890 is a high-performance corrosion-resistant alloy that belongs to the chromium-nickel-molybdenum series of alloys. It is mainly composed of nickel, chromium, molybdenum, iron, and copper. This alloy has excellent corrosion resistance in various corrosive environments such as acids, alkalis, and salt solutions. Incoloy Alloy 890 offers high mechanical strength and toughness, good weldability, and ease of fabrication. It is resistant to stress corrosion cracking, pitting, and crevice corrosion, making it suitable for use in harsh and demanding applications in industries such as chemical processing, oil and gas, and marine engineering. The chemical composition of Incoloy Alloy 890 typically includes 26-30% nickel, 19-23% chromium, 4-5% molybdenum, 1.5-3% copper, 0.3% maximum carbon, 2.0% maximum manganese, and 0.5% maximum silicon. It may also contain small amounts of other elements such as nitrogen, phosphorus, and sulfur. In terms of mechanical properties, Incoloy Alloy 890 has a tensile strength of 620 MPa and a yield strength of 300 MPa at room temperature. Its elongation at break is 50% minimum. The alloy also has good impact strength and fatigue resistance at both room temperature and elevated temperatures. Incoloy Alloy 890 can be heat-treated to enhance its mechanical properties. Annealing at 1093-1204�°C for 30 minutes per 25mm of thickness followed by rapid air cooling can improve the alloy's toughness and ductility. Solution annealing at 1093-1177�°C followed by rapid water quenching can improve its corrosion resistance and high-temperature strength. Overall, Incoloy Alloy 890 is a versatile and high-performance alloy that can withstand corrosive environments and harsh operating conditions. Its excellent properties make it suitable for use in various industrial applications where high strength and corrosion resistance are required. The following are the execution standards of Incoloy alloy 890 in various countries: US: AMS 5837, AMS 5598, AMS 5666, AMS 5839, ASTM B366, ASTM B408, ASTM B425, ASTM B564, ASTM B751, ASTM B775, ASTM B829, UNS N08890 Europe: EN 10095 Germany: DIN 17742, DIN 17750, DIN 17754 UK: BS 3076 Japan: JIS G4902 China: GB/T 14992 We can provide the following the form:Incoloy alloy890 coil; Incoloy alloy890 strip;Incoloy alloy890 plate; Incoloy alloy890 sheets; Incoloy alloy890 tube; Incoloy alloy890 pipe;Incoloy alloy890 flat; Incoloy alloy890 bar GB:GH89/JIS:G4303/UNS:N008904/W.Nr:1.4539 Manufacture of chemical equipment such as heat exchangers, reactors, and evaporators. Applications in the petroleum extraction and refining industry, such as drill bits, casings, pumps, and valves. High-temperature components in the aerospace industry, such as turbine disks, turbine blades, and combustion chamber components in jet engines. Reactors and equipment in the pharmaceutical industry, as well as other equipment and components in high-temperature and corrosive environments.
Haynes 230 is a nickel-based superalloy that is known for its high strength, excellent resistance to oxidation and corrosion, and good thermal stability. It was developed by Haynes International, Inc., and is commonly used in high-temperature applications, such as gas turbine engines, aerospace, and chemical processing industries. Chemical Composition: Haynes 230 is composed of a range of elements, including nickel (Ni), chromium (Cr), molybdenum (Mo), iron (Fe), cobalt (Co), manganese (Mn), silicon (Si), carbon (C), and aluminum (Al). The chemical composition of Haynes 230 can be adjusted within certain ranges to meet specific application requirements. Mechanical Properties: Haynes 230 has excellent mechanical properties, including high strength, good ductility, and toughness. Its yield strength is 685 MPa and its tensile strength is 1025 MPa. It also has a 42% elongation rate. Thermal Properties: Haynes 230 exhibits good thermal stability, making it an excellent choice for high-temperature applications. Its melting point is 1305�°C (2381�°F), and it has a thermal expansion coefficient of 13.7 �µm/m�·K (7.6 �µin/in�·�°F). Corrosion and Oxidation Resistance: Haynes 230 has excellent resistance to oxidation and corrosion in high-temperature and high-stress environments. It has a good resistance to sulfur-bearing gases, such as hydrogen sulfide (H2S) and sulfur dioxide (SO2), and can withstand harsh chemical environments. Weldability: Haynes 230 can be welded using a variety of methods, including gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), and resistance welding. However, special precautions need to be taken during welding to avoid cracking and other defects. Here are the country standards for Haynes 230 alloy: USA: AMS 5878, AMS 5879, AMS 5962, AMS 5963, AMS 5964, AMS 5965, AMS 5966, AMS 5967, AMS 5968, AMS 5969, AMS 5970, AMS 5971, AMS 5972, AMS 5973, AMS 5974, AMS 5975, AMS 5976, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, AMS 5998, AMS 5999, AMS 5877, ASTM B366, ASTM B435, ASTM B572, ASTM B619, ASTM B622, ASTM B626, ASTM B366, UNS N06230 Europe: EN 2.4733 Germany: DIN 17742, VdT�?V 546 UK: BS HR 201 Japan: JIS NW 6230 We can provide the following the form:Haynes 230 coil; Haynes230 strip;Haynes 230 plate; Haynes 230 sheets; Haynes 230 tube; Haynes 230 pipe;Haynes 230 flat; Haynes 230 bar GB/JIS:NW 6230/UNS:R06230/W.Nr:2.4733 Haynes 230 is widely used in high-temperature applications, such as gas turbine engines, aerospace, and chemical processing industries. It is also used in heat exchangers, industrial furnaces, and in the production of petroleum and natural gas. Its excellent mechanical properties, corrosion and oxidation resistance, and good weldability make it a popular choice for a wide range of applications.
Haynes 718 Alloy is a high-temperature, high-strength nickel-based alloy developed by Haynes International. It has excellent oxidation resistance, corrosion resistance, and high-temperature strength, and is widely used in high-temperature and high-pressure environments in aerospace, energy, chemical, petroleum, and natural gas industries. The chemical composition of Haynes 718 Alloy includes approximately 52% nickel, 19% chromium, 3% titanium, 5% aluminum, about 0.9% iron, and trace amounts of carbon, sulfur, phosphorus, copper, and tantalum. This combination of elements gives Haynes 718 Alloy its excellent high-temperature performance. In addition, Haynes 718 Alloy uses advanced heat treatment processes, which can further improve its high-temperature strength and oxidation resistance. Haynes 718 Alloy can be made into various shapes of products, such as sheets, rods, pipes, forgings, castings, and welding materials, etc. Its mechanical properties improve with increasing temperature, and it can maintain high strength and toughness at high temperatures ranging from 600�°C to 980�°C. In addition, Haynes 718 Alloy has excellent oxidation resistance and can withstand high-temperature oxidation environments for a long time. Haynes 718 alloy is an important nickel-based superalloy used in high-temperature applications such as gas turbine engines. Below are the standards for Haynes 718 alloy in various countries: United States: AMS 5596, AMS 5662, AMS 5663, AMS 5664, AMS 5832, AMS 5962, AMS 5665, AMS 5666, AMS 5667, AMS 5668, AMS 5669, AMS 5670, AMS 5671, AMS 5758, AMS 5759, AMS 5660, AMS 5661, AMS 5677, AMS 5909, AMS 5927, AMS 5947, AMS 5950, AMS 5963, AMS 5964, AMS 5966, AMS 5967, AMS 5968, AMS 5969, AMS 5970, AMS 5971, AMS 5972, AMS 5973, AMS 5974, AMS 5975, AMS 5976, AMS 5977, AMS 5978, AMS 5979, AMS 5980, AMS 5981, ASTM B637, ASTM B670, UNS N07718 Europe: EN 2.4668 Germany: DIN 17744, VdT�?V 718 France: AFNOR NC 19 Fe Nb United Kingdom: BS HR 201, BS HR 401, BS HR 501 Japan: JIS NW 0771 We can provide the following the form:Haynes 718 Alloy coil; Haynes 718 Alloy strip;Haynes 718 Alloy plate; Haynes 718 Alloy sheets; Haynes 718 Alloy tube; Haynes 718 Alloy pipe;Haynes 718 Alloy flat; Haynes 718 Alloy bar BS:HR 201/JIS:NC19FeNb/UNS:N07718/W.Nr:2.4669 Haynes 718 is a nickel-chromium alloy that is known for its high strength and excellent corrosion resistance. It is commonly used in a wide range of applications, including: Aerospace industry: Haynes 718 is widely used in the aerospace industry due to its high strength, excellent fatigue resistance, and good weldability. It is used for components such as gas turbine engine parts, thrust reversers, and exhaust systems.
Haynes 625 is a nickel-chromium-molybdenum alloy with niobium/tantalum added to enhance its corrosion resistance and strength at elevated temperatures. It is one of the most widely used superalloys due to its exceptional mechanical properties, high corrosion resistance, and ease of fabrication. Haynes 625 has excellent resistance to pitting, crevice corrosion, and stress corrosion cracking in chloride-containing environments, making it suitable for use in marine and chemical processing applications. It also exhibits high resistance to oxidation and scaling at elevated temperatures up to 1000â??, making it suitable for use in high-temperature applications such as gas turbines, furnace components, and heat exchangers. Haynes 625 can be easily fabricated by various methods including welding, forging, and machining. It can be used in both as-welded and annealed conditions. It is available in various forms such as plates, sheets, bars, and tubes, and is widely used in industries such as aerospace, chemical processing, oil and gas, and nuclear power. US standards: AMS 5599: Specifies the standard specifications for Haynes 625 plate, sheet, and strip; AMS 5666: Specifies the standard specifications for Haynes 625 bars, wire, profiles, and forgings; AMS 5837: Specifies the standard specifications for Haynes 625 seamless or welded tubes; ASME SB 443: Specifies the standard specifications for Haynes 625 plate, sheet, and strip; ASME SB 446: Specifies the standard specifications for Haynes 625 bars and forgings; ASME SB 444: Specifies the standard specifications for Haynes 625 seamless and welded tubes. European standards: EN 2.4856: Specifies the standard specifications for Haynes 625 plate, sheet, strip, bars, and wire; EN 10216-5: Specifies the standard specifications for Haynes 625 seamless steel tubes. Japanese standards: JIS NW 625: Specifies the standard specifications for Haynes 625 plate, sheet, strip, bars, and seamless tubes; JIS NW 6692: Specifies the standard specifications for Haynes 625 welded tubes. Chinese standards: GB/T 14992: Specifies the standard specifications for Haynes 625 plate, sheet, and strip; GB/T 14994: Specifies the standard specifications for Haynes 625 welded seamless steel tubes; GB/T 15008: Specifies the standard specifications for Haynes 625 bars and forgings; GB/T 15010: Specifies the standard specifications for Haynes 625 seamless and welded tubes. We can provide the following the products:Haynes 625 alloy coil; Haynes 625 alloy strip;Haynes 625 alloy plate; Haynes 625 alloy sheets; Haynes 625 alloy tube; Haynes 625 alloy pipe;Haynes 625 alloy flat; Haynes 625 alloy bar GB/JIS:G4903/UNS:N06625/W.Nr:2.4856
Haynes 617 is a nickel-chromium-cobalt-molybdenum alloy with excellent high-temperature strength, good oxidation resistance, and excellent resistance to carburization and sulfidation. It is commonly used in gas turbine engine components, industrial furnace applications, and other high-temperature applications. Haynes 617 has a nominal composition of 44.5% nickel, 20-24% chromium, 8-10% molybdenum, 0.5% maximum copper, 0.15% maximum carbon, 1.0% maximum cobalt, 0.5% maximum silicon, 1.0% maximum manganese, 0.015% maximum sulfur, 0.015% maximum phosphorus, and the balance iron. Haynes 617 offers excellent mechanical properties at high temperatures, making it ideal for use in gas turbine engine components such as combustion liners, transition ducts, and exhaust systems. Its high-temperature strength and resistance to carburization and sulfidation make it suitable for use in industrial furnace applications such as radiant tubes, muffles, and retorts. In addition to its high-temperature strength and resistance to oxidation and carburization, Haynes 617 also offers good resistance to thermal shock and thermal fatigue. This makes it ideal for use in applications that require resistance to cyclic heating and cooling, such as gas turbine engine components and industrial furnace applications. Overall, Haynes 617 is a versatile high-temperature alloy that offers excellent mechanical properties and resistance to corrosion and oxidation in high-temperature environments. Its use in gas turbine engine components and industrial furnace applications has been well-established, and it continues to be an important material in these industries. US standards: AMS 5887: Standard specification for Haynes 617 plate, sheet, and strip; AMS 5888: Standard specification for Haynes 617 rod, wire, and bar; AMS 5889: Standard specification for Haynes 617 seamless or welded pipe; ASME SB 166: Standard specification for Haynes 617 rod, wire, and bar; ASME SB 167: Standard specification for Haynes 617 seamless pipe; ASME SB 168: Standard specification for Haynes 617 plate, sheet, and strip; ASME SB 564: Standard specification for Haynes 617 forgings. We can provide the following the products:Haynes 617 alloy coil; Haynes 617 alloy strip;Haynes 617 alloy plate; Haynes 617 alloy sheets; Haynes 617 alloy tube; Haynes 617 alloy pipe;Haynes 617 alloy flat; Haynes 617 alloy bar GB/JIS:NW 6617/UNS:N06617/W.Nr:2.4663
Haynes 718 alloy is a precipitation-hardening nickel-chromium alloy that offers high strength, toughness, and resistance to corrosion and high-temperature environments. It was developed in the 1950s for use in gas turbine engine components, and has since found a wide range of applications in other high-stress industries such as aerospace, nuclear, and chemical processing. The alloy is characterized by its excellent mechanical properties, including high tensile and yield strength, good ductility and toughness, and resistance to fatigue, creep, and stress-corrosion cracking. These properties are achieved through a combination of precipitation hardening and solid-solution strengthening, which involve heat treatment processes that cause the formation of fine, uniform precipitates within the metal matrix. Haynes 718 alloy also has good resistance to oxidation and other forms of corrosion, particularly in high-temperature environments. It is capable of maintaining its properties at temperatures up to around 1300�°F (700�°C), making it suitable for use in hot sections of gas turbine engines, nuclear reactor components, and other high-temperature applications. In addition to its mechanical and corrosion resistance properties, Haynes 718 alloy also has good weldability and machinability. It can be readily welded using a range of methods, and can be easily machined using standard metalworking techniques. Overall, Haynes 718 alloy is a versatile and reliable material that has proven itself in a wide range of demanding applications. Its combination of high strength, toughness, and resistance to corrosion and high-temperature environments make it an ideal choice for use in critical components where reliability and performance are paramount. Haynes 718 alloy standards vary by country. Here are some of the common ones: United States Standards: AMS 5596: Standard Specification for Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, Haynes 718 AMS 5662: Standard Specification for Nickel Alloy, Bars, Forgings, and Rings, Haynes 718 AMS 5663: Standard Specification for Nickel Alloy, Bars, Forgings, and Rings, Haynes 718 (UNS N07718) AMS 5664: Standard Specification for Nickel Alloy, Bars, Forgings, and Rings, Haynes 718 (UNS N07718) AMS 5832: Standard Specification for Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, Haynes 718 AMS 5962: Standard Specification for Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, Haynes 718 AMS 5838: Standard Specification for Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire, Haynes 718SPF We can provide the following the prodcuts:Haynes 718 alloy coil; Haynes 718 alloy strip;Haynes 718 alloy plate; Haynes 718 alloy sheets; Haynes 718 alloy tube; Haynes 718 alloy pipe;Haynes 718 alloy flat; Haynes 718 alloy bar GB/JIS:NW7718/UNS:NW7718/W.Nr:2.4668
We are pleasure to introduce our company, Shanghai Solid Steel International Co Ltd, established in 2001 year in China, which is specialized in export prime electric tinplate sheet from China. Specification : Thickness: 0.15-1.0mm, Width: 600mm up. Grade: SPCC or MR. Surface: Bright or Matt/Stone finish, Temper: T1-T5. Coat: 2.8/2.8g. Anneal: BA or CA. Deliver time: 7-15 days around. We have cutting machine to make coil into sheet. Material can used to make chemical tank/food Jar /Equipment cover/Bottle cap/Aerosol products/Gas Cartridge/Miscellaneous cans, etc.
Homogeneous vinyl sheet is a true through-pattern construction which provides highter wear and consident appearance along with superior abrasion resitance. Homogeneous vinyl sheet offers a spectrum of colors with clean and fresh appearances to creat specific space requirements. Karmeen Homogeneous vinyl sheet coordinates across Karmeen interior space solution protfolio to creat unique design concepts and solutions for every space. its outstanding fetures make Homogeneous flooring ideal solution for hospitals, healthcare, education, office, and many public facilities.
Flat steel: Tinplate, Hot rolled, Cold rolled, Galvanized coils and sheets
Thickness:0.14mm-0.50mm Width:450mm-970mm coil id: 508 mm Tin coating weight:1.0-5.6 Our company use box annealing(ba) for products. Matrial: sphc/mr Standard:gb(t); jis g3303 Coil weight:3~7 mt Passivation:311 Oiling: dos Market:gobal Cuting length: based on customers' requirements Surface finish apperance: It will wtih electrochemical passivation treatment and dos oil.: (ps:for poolish surface it will be add $20-$30 us dollar per ton, and the price already add to the total price) Brgith(b) Stone(r) Silver(s) Matt(m) Features of tfs products: 1. Excellent paint adhesion can be used to produce drd cans and plastic contact tank 2. Excellent heat denaturation temperature baking does not change color 3. Excellent resistance to sulfur 4. Excellent corrosion resistance 5. Alkali resistance excellent more suitable for basic content packaging Features of tinplate products: 1. Excellent corrosion resistance can meet the corrosion resistance of different content requirements 2. Excellent finishing of various coatings and inks 3. Excellent welding can be used for welding manufacturing every kind of canned 4. Excellent processing and strength 5. Beautiful appearance Packaging: antirust packaga(all the products we will cover with anti-rust paper, steel cover, corner protect by angles, steel strips and pallets. ) Shipping: export sea packing. Delivery detail: 30 days after receipt of the down payment or l/c at sight
1. Reference standard: gb2520-2000, jis g3303-2002 and din en10202-2001 2. Material: mr, spcc 3. Thickness available: 0.15mm to 0.50mm 4. Width available: 600mm to 1010mm 5. Temper grade: t1 - t5 dr8-dr10ba and ca both. 6. Tin coating: ordinary 2.8g/2.8g, 5.6g/5.6g, we also can produce according to customers' requests 7. Coil diameter: id 420/ 508mm, od from 1, 000 to 1, 250mm Seaworthy standard with wooden pallet
Tinplate/coil, spte, chromeplate/coil, tfs, t2-t5, dr8, dr9., , thickness:0.14-0.5, width:700-1000.
Application:cans, light industry, electronic cable, optical cable, metal decorating etc, such as tea cans, painting cans, packaging cans etc. The product range Distinguish Project coil cutting board Manufacturing range manufacturing range Thickness(mm) 0.15-0.50 0.15-0.50 Width(mm) 320-1050 320-1050 Length(mm) -- 510-1100 Weight(ton) 2.0-13 Inner diameter(mm) 420/508 Outer diameter(mm) 1600(max) Plastic film, anti-rust paper, corner-protected.Or accoding to your requirments.
1. Technique Standard: GB/T2520-2000, JIS G3303-2002, DIN EN10203, BS EN10202 2. Steel Type: SPCC, MR 3. Thickness:0.18-0.40mm 4. Roll Width: 600-960 mm 5. Tin coating weight: 2.8g/m² each side 6. Temper and Annealing: T2, T2.5, T3, T3.5,T4 BA 7. Surface: Bright/Stone/Silver finish with passivation treatment; DOS oil 8. Packaging Details: Thin plastic film+rust-proof paper+metal cover+metal angles+steel band strips+pallet Loaded in 20 feet container with max weight 25 tons. Application: Widely used for metal packaging and printing industry. Such as making cans for food, tea, paints, oil, chemicals, ink, aerosol, gifts, printing and other purposes. Standard BS, DIN, GB, JIS Grade MR,SPCC Width 960mm Thickness 0.18-0.40mm Hardness T2,T2.5,T3,T3.5,T4 Place of Origin Jiangsu, China (Mainland) Brand Name Guolian Model Number Type Tinplate Sheet Application Mteal Packing Industry Technical Standard GB/T2520-2000, JIS G3303-2002, DIN EN10203, BS EN10202 Steel Type MR,SPCC Roll Width 600-960 mm Temper and Annealing T2, T2.5, T3,T4 BA Coil Diameter ID 508mm, OD from 1,000 to 1,250mm Shipment Terms FOB,CIF Payment Mode LC,TT Application Paints can, aerosol container, automobile oil can, tea can, spray can Packaging Wooden Pallet, Metal Corner Protector Technique Cold Rolled Min Orfer 25 Metric Ton/Metric Tons Container Size 1x20' container FOB Price USD 1000~1500 / Ton Shipping Port Shanghai Payment Mode L/C T/T Western Union Production ability 200,000 Metric Ton/Metric Tons / Year Package 1)Thin film+rust-proof paper+metal cover+metal angles+ straps+pallet 2)Load in 20' container with max weight 25 tons. Delivery time within 35-60 days after the peceipt of buyer's prepayment Production ability 200,000 Metric Ton/Metric Tons / Year Package: 1)Thin film+rust-proof paper+metal cover+metal angles+ straps+pallet 2)Load in 20' container with max weight 25 tons.
Thickness:0.15mm Tin Coating:2.8/2.8 Temper:DR8-CA/DR9-CA. Original factory: Baoshan Iron&Steel Co.,ltd Usage: Twist Cap, Tin can. Standard Export Packaging.
1) Features: Outstanding corrosion resistance. Superior workability Attractive surface luster. Excellent lacquerability and printability. Elegant surface. 2.)materials: mr / spcc 3.)reference standards: gb2520-88/ jis g3303 /din en10203 4.)temper : single rolled products:t1, t2, t2.5, t-3, t-3, t-4, t-4, t5 Double rolled products: dr8, dr9 5.)tin coating: 2.8/2.8 , 5.6/5.6g, 8.4/8.4, 11.2/11.2, 5.6/2.8, 8.4/2.8, 6.)thickness: 0.15 to 0.45 mm Width: 190 to 1000 mm or special specifications made by slitting Id: 419mm or 508mm 7.)weight of coil: about 3 to 10 metric tons or as per customerÆs request 8.)surfaceáfinish:ábright finish, stone finish, matte finish 9.)surface treatment: light oil or unoiled 10.)method of anneal: ca or ba 11.)packing: inner packed by thin plastic film and anti-rust paper, áá outer wrapped by metal cover , metal angle and steel band strips on pallet with seaworthy packing 12.)applications: 1.) food packaging cans;2.) carbonated beverages cans;3.) decorated cans;4) grease cans ;5.) chemical products' cans /tangs;6.)aerosol cans.Etc, General export packages
Tinplate: Width:700-1000mm, thickness:0.18-0.49mm. 2.8/2.8, 5.6/5.6 Jis g 3303 standard, bright finish. Spcc, sphc. T2.5-t4. Mt
Tinplate: Width:700-1000mm, Thickness:0.18-0.49mm. 2.8/2.8, 5.6/5.6 JIS G 3303 standard, Bright finish. SPCC, SPHC. T2.5-T4. MT