Diesel Oil Suppliers and Manufacturers

EN 590 Gas Oil is a 10 ppm (parts per million) sulphur content gas oil. It has a higher cetane number than A2 Class Gas Oil (another 10ppm sulphur content class of red diesel), making it better suited to internal combustion engines in off-road vehicles.

Minimum Quantity: 100,000 Metric Tons @ Trial lift Maximum Quantity: 400,000 Metric Tons @ Monthly Supply Price: Gross $380.00 USD/$370 .00 USD Net on FOB Price: Gross $400.00 USD/$390 .00 USD Net on CIF Commission: Buyer's Side $5.00 USD / Seller's Side $5.00 USD

Origined Russia. Bulk ship

Our company is exporting, distributing and supplying Diesel Gas D-2 Oil L 02/62 GOST 30582 FOB or CIF ASWP. Quantity: From 20,000 - 200,000 MT per Month, CIF Price: $320 USD per MT, FOB Price: $310 USD per MT. From 200,000 - 500,000 MT per Month, CIF Price: $310 USD per MT, FOB Price: $300 USD per MT.

It currently adopts the most advanced principles of Coalescence-separation in world, collecting filtration precision and efficient demulsification and dehydration in one, can remove a large amount water without heating the oil, can fast separate water from the oil that has the equal amount of oil and water, and after treatment the cleanliness level up to NAS6, the water content in oil up to 50ppm, it is not easy to rust when use the oil after filtration to clean the bearings, lower costs, the oil can be reused, compact design, simple and easy to operate. Basically it is non-wearing for parts, low maintenance costs, small energy consumption, and the trolley-style design is convenient for the movement of equipment. Working Principle Coalescence separator is equipped with two different functions of the filters inside - separation filter and coalescence filter. the medium for dehydration go through the import of coalescence separator into the filter shell, and the filter tray distribute it to of each coalescence filter, liquid flows from inside to outside of coalescence filter, after filtration, emulsion breaking, coalescence, and sedimentation four process, the liquid demulsify the emulsion, and then after demulsification the droplet water form the large big one and subside at the bottom of the shell. Part of the droplet water with the liquid flow into separation filter, the filter is made up of a special filter material with good water-repellent performance, small drops were completely and effectively blocked outside of the filter, and form bog drops again to subside, so as to ensure effective removal of water. The water subside at the bottom of the shell can be shown by the lever meter, so that the water and dirt can be removed out by the drainage valve from time to time. The media after separated water will be collected by separation filter tray, and flow out from export of the separator. Technical parameters Items Unit TLA-10 TLA-20 TLA-30 TLA-50 TLA-70 TLA-100 TLA-200 Flow L/min 10 20 30 50 70 100 200 Working pressure Mpa 0.3 Water content in oil PPM 50 CLeanliness NAS 6级 Working noise dB(A) 55 65 85 Power KW 0.75 0.75 0.75 2.2 2.2 3 6 Dimension mm 700 700 700 800 800 1000 1500 570 570 600 650 650 700 1000 550 600 650 750 800 850 1200 Weight KG 100 110 130 150 160 190 260 Dimension and weight will be changed with changing the technical specification.

Diesel

En590, jeta1 and d6.

Palm oil products and en590 diesel.

Product characteristics: 1.Superlubrication Lift engine power more than 12%! The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%. 2.The ultimate wear resistance Save fuel up to 15%! The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%. 3.Shock absorption and noise reduction Effectively reduce noise by more than 6%! The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced. 4.Deep repair Effectively repair engine wear, prolong engine life by 2 times! Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times. 5.Cleaning and energy saving Remove more than 85% of oil mud carbon, reduce the number of engine cleaning! The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost. 6.Extension period Extend the oil exchange cycle by more than double. Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice. 7.Green environmental protection CO (carbon monoxide) emissions decreased by 90% . The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.

Product characteristics: 1.Superlubrication Lift engine power more than 12%! The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%. 2.The ultimate wear resistance Save fuel up to 15%! The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%. 3.Shock absorption and noise reduction Effectively reduce noise by more than 6%! The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced. 4.Deep repair Effectively repair engine wear, prolong engine life by 2 times! Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times. 5.Cleaning and energy saving Remove more than 85% of oil mud carbon, reduce the number of engine cleaning! The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost. 6.Extension period Extend the oil exchange cycle by more than double. Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice. 7.Green environmental protection CO (carbon monoxide) emissions decreased by 90% . The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.

Product characteristics: 1.Superlubrication Lift engine power more than 12%! The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%. 2.The ultimate wear resistance Save fuel up to 15%! The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%. 3.Shock absorption and noise reduction Effectively reduce noise by more than 6%! The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced. 4.Deep repair Effectively repair engine wear, prolong engine life by 2 times! Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times. 5.Cleaning and energy saving Remove more than 85% of oil mud carbon, reduce the number of engine cleaning! The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost. 6.Extension period Extend the oil exchange cycle by more than double. Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice. 7.Green environmental protection CO (carbon monoxide) emissions decreased by 90% . The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.

Bio Mileager Premium Diesel Engine Oil 15W-40 is high quality multigrade engine oil, meeting performance requirements, formulated from selected high quality group II base oils and additives, Bio Mileager Premium Diesel Engine Oil 15W-40 suits petrol and diesel engines,.