Test voltage(contact to contact):: 0.7--2.1 kv rms rated current: 1.5--35 a operating temperature range: - 50¡æ--125¡æ ingress protection: ip50 humidity: up to 95% at 60oc vibration: 10-2000hz, 15g As per specified
N series connector is a kind of threaded connection with low power. It widely applies to radio equipments and instruments for connecting RF coaxial cables. It can exchange with the international like product. Electrical characteristics: Characteristic impedance: 50+ Frequency range: 0-11ghz Contact resistance: Inner conductor: 1.0m+ Out conductor: 0.2 m+ Insulation resistance: 5000m+ Vswr: 1.30 Durability: 500 cycles Material and finishing: Center contact: Pin- brass, gold or silver plated Jack- phosphor bronze or beryllium bronze, gold or silver plated Body and other metal parts: brass, nickel or ternary alloy plated Insulator: PTFE Gasket: silicone rubber. Standard export packing.
Specifications Material Specification: Housing: High Temperature thermoplastics: LCP; Color: Black Contact: Phospor Bronze/Brass Shell: Brass/Phospor Bronze/SUS301 Plated: Contact: gold plated (G/F,5U"/10U''/15U''/30U'') Shell: Gold/Nickel Materials and plating can be changed according to customer definition. Mechanical Characteristics: 1,Insertion Force:35 N Max; 2,Extraction Force:10N Min(Initial) 3,Durability Life:50000 Times. Electrical Characteristics: Contact Current Rating:0.5 Amperes Dielectric Withstanding Voltage: AC 500V r.m.s Insulation Resistance: ¡Ý100M¦¸ Contact Resistance: ¡Ü100m¦¸ Operating Temperature:-25 oC - +85 oC Environmental Spec. Have passed below tests: 1.Salt Fog Test 2.AIR Reflow Soldering Test 3.Mechanical Vibration Test 4.Adhered Tin Test 5.Temperature Cycle Test Application: Computer, MP3 player, MP4 player, digital video and camera, PADs, GPS,flash drive and cable ASSY. 1000PCS/Bag,5000PCS/Carton.
Keeps good conduction without any damage resistant to effusion can resistant to 4KV 1 min in water 1 Has piercing structure, need not strip the connector over 2 Takes small installation space,easily installed 3 suitable for bridge,overhead line and underground 4 Can used in between below 50 degrees and 150 degrees Materials Body: Nylon 66 Teeth/blade : copper tinned Bolt: Hot dip galvanized Sheer head : Zinc alloy Parameters KTEP:main:16-95mm2/1.5-10mm2 Packing:300pcs/CTN
Aluminum 1" MC Cable Connector Description: Appleton TMC1181100 Series Cable Connector TMC Series Connectors are designed for use with type MC jacketed metal clad cable having interlocked or continuous corrugated armor. TMC Series Connectors are used to install Type MC metal clad cable to provide a mechanical liquidtight connection and grounding continuity between cable armor and metal enclosures, panelboards or imilar equipment. TMC connectors comply with UL514B and CSA C22.2 requirements. Armor Dia.: .800 -1.180 Jacket Dia: 1.187 - 1.375 Part #: TMC1181100 A:2.00 B: 3.09 C:.94 NEW in boxes.
Application:RF Gender:male Frequency Range:0-6GHZ Insulation Resistance:>=5000m Impedance:50 or 75 Insulation Voltage Withstanding:2700V Contact Resisitance:Center Conductor:
Ipc series insulation piercing connectors Piercing connector, simple installation, need not strip the cable coat. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. Adopted special connecting table, apply to joint of cu(al) and cu(al) or cu and al. Small electric connecting resistance, impulse current can be up to 15ka. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 6kv. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (1.5-240mm2) Packaging by cartons
Material: polypropylene plastic (pp plastic) Usage: peel wire coat, insert the wire in, then tighten 10.401106 (p74): grey, height 23mm, inner dia. 10.401106 (p74): grey, height 23mm, inner dia. 6.0mm 10.401107 (p75): orange, height 27.5mm, inner dia. 8.0mmproducts related to this selling lead 6.0mm 10.401107 (p75): orange, height 27.5mm, inner dia. 8.0mmproducts related to this selling lead
The cables are inserted, the connector is crimped, and the heat shrink sleeve is shrunk around the crimped connector using a hot air gun. This contributes to a watertight connection. Buy Heat Shrink Butt Connectors online in UK that can be used for joining two cables together. Order top quality Heat Shrink Terminals from Kafton UK.
Butt Connectors are also known as Splice Connectors, Butt Splices, and Crimp Connectors. Butt Connectors are available for almost any type of wiring requirement, including basic wire splices suited for heavy-duty vibration applications and hazardous locations where sealed connectors are necessary. Buy Butt Connector Terminals online in UK that are a crucial component in 12-volt electrical systems. Order top quality Wire Connectors from Kafton UK.
10/100 Base-T Shielded 8 Pin RJ45 Magnetic Jack for Industrial PC and Fieldbus System ( 8P4C,1*1 Port, Tab Up, Green/Yellow Led)
RJ45 8P8C Connector without Integrated Magnetics for router and Switch( 8P4C,1*1 Port, Tab Up ,Green/Yellow LED)
This type insulation piercing connectors are suitable for all types of LV-ABC conductors as well as connections to service and lighting cable cores. When tightening the bolts, the teeth of the contact plates penetrate the insulation and establish a perfect contact. The bolts are tightened until the heads shear off. Stripping of insulation is avoided. Suitable for aluminum and copper conductors and components not losable, end cap attached to body, Insulation material made of weather resistant glass fiber reinforced polymer, contact teeth made of tinned brass or copper or aluminum, bolt made of dacromet steel. insulation piercing connector
Cetification ETL/CETL Model Number L5-30P Type Electrical Plug Rated Voltage 125V Rated Current 30A Wattage 3750W Color White Body Material Nylon Grounding Standard Grounding WIFIï No Application Scope Industrial Application Residential/General-Purpose
RC Connector EC5 Trinity 3 pin Charger Connector Set Description: 1. Battery EC5 :Reverse polarity protection . 2. Low Resistance. 3. High condtuctivity. 4. Used for RC model battery. 5. High quality and good service. 6. Banana plug is gold or nickel plated. 7. The sizes include: 2.0mm, 3.0mm, 3.5mm, 4.0mm, 5.0, 5.5mm, 6.0mm, and 8.0mm. 8. It is mainly used in motor, battery, electro-hydraulic governor. 9. It is convenient used in socket. So it is prior to use in High-power electrical. 10. It has different plastic housing protected. 11. It is convenient used in socket. So it is prior to use in High-power electrical, such as audio, receiver, enlarger. 12. EC5 insulated jacket 13. RoHS compliant PS: it is very kind of you to tell us the details productor of you like so we can contract you in time
LC(Stands for Lucent Connectors) fiber optic connector, which now also widely used in fiber optic device and telecommunications. LC connectors' shape similar with SC fiber optic connector, but the size only half of SC fiber connector. SC fiber connector use 2.5 mm ferrule, while the LC connectors use 1.25 mm ferrule. Lucent Technologies first developed the LC connector for use in Telcoenviroments. Sophenol supply both singlemode and multimode LC optical fiber connectors. Which includes singlemode LC UPC connector, singlemode LC APC connector and multimode LC UPC connector, simplex or duplex versions are available. Together with related LC fiber products, such as LC fiber optic adaptor/adapter, LC attenuators and LC cable assemblies. These products are suitable to use in multimedia, industrial and military applications. Features: Low insertion loss Corrosion resistant body Push & pull mechanism like RJ connectors Half size of a regular fiber connectors Precision mechanical dimension Meets Telecordia-GR-326-CORE For 3.0mm, 2.0mm jacket or 900um buffer ROHS compliant Specifications: Insertion loss: 0.20dB Return loss: >55dB (UPC) Fiber compatibility: 9/125um single mode Connectors type: LC Duplex Applications: CATV Active device termination Test equipment Local Area Networks (LANs) Telecommunication networks Data processing networks Wide Area Networks (WANs)
Model prop hook Hardware pendant Model prop connector Hardware connector Material: stainless steel 201 Thickness: 1.33 mm Size: 70 mm*90 mm*10 mm Tolerance: 0.2 Surface: industrial surface Weight: a pair of 95 g Process: blanking, stamping, countersunk head Uses: shopping mall display models, window dummy models, clothing dummy models, dummy models body connectors High-end hardware connectors for mannequins are universal parts. (Two pieces of one male and one female are a set of products) Hardware accessories
Adaptor:NylonSpacelabs, Pins: Golden plated brass pins Connector house: ABS, Strain relief: Medical PVC, Connector: 10pins, CE&ISO,OEM/ODM, Use for direct connect spo2 sensor, spo2 extension cable, Compatible with Spacelabs 1050, 1600, 1700, 90367, 90369, 90469, 90496, 91220, 91369, mCare 300, Ultraview
Adaptor:Nylon, Pins: Golden plated brass pins Connector house: ABS, Strain relief: Medical PVC, Connector: 10pin, CE&ISO,OEM/ODM, Use for direct connect spo2 sensor, spo2 extension cable,
Adaptor:Nylon, Pins: Golden plated brass pins Connector house: ABS, Strain relief: Medical PVC, use for spo2 sensor, spo2 extension cable, Compatible with: Infinity Delta, Infinity Gamma, Infinity Kappa, Infinity MultiMed Pod, Infinity Vista , SC 6002XL, SC 7000, SC 8000, SC 9000XL,
