Commodity: Ammonium bicarbonate Food grade Molecular formula:NH4HCO3 Molecule Weight: 79.05 H.S code: 2836994000 CAS: 1066-33-7 Product Physical Properties WHITE POWDER CRYSTAL, SPECIFIC GRAVITY IS 1.586, IT CANDISSOLVE IN WATER, BUT CANT DISSOLVE IN ALCOHOL AND ACETINE. Specifications: Appearance: white free-flowing crystalline powder without agglomeration Purity as Ammonium Bicarbonate ,% by weight 99.5 (minimum) Chloride (as Cl), % by weight 0.20(maximum) Sulphates (as SO4),% by weight 0.10(maximum) Iron (as Fe), % by weight 0.004(maximum) Nonvolatile matter, % by weight 0.10(maximum) Heavy metals (as Pb), ppm 2.50(maximum) Copper (as Cu), ppm 5.0(maximum) Arsenic (as As), ppm 0.6(maximum) Tarry matter To pass test Oil Content Less than 10 ppm Melamine Content NIL USAGE BAKING FOODS SUCH AS CRISP CAKE, BISCUIT ETC. IN ADDITION, ITALSO WIDELY USED IN CHEMICAL FIELD SUCH AS FLOUR BRIGHTENING AGENT,RARE EARTH DEEP PROCESSING, MEDICINE MIDBODY, PLASTICS PROCESSING,ELECTRONIC ELEMENT ETC. PACKING OUTSIDE IS WEAVE BAG OR PAPER BAG, INSIDE IS FOOD PLASTICSBAG, 25KG/BAG. THE PACKING ALSO CAN ACCORDING TO CONSUMERS REQUEST. STORAGE Stored in a cool, ventilated, dry place.
Product Name Citric acid monohydrate Product Charactersï White Crystalline Powders, Colorless Crystals or Granules Executive Standards BP/USP/FCC/E330/GB1886.235-2016 Packaging plastic woven bag, 25kg net composite paper-plastic bags or 3-ply kraft paper bags with PE liner, 500kg or 1000kg net PP woven Jumbo bags Storage Kept in a light-proof, well-closed, dry and cool place Main Usage Citric Acid is mainly used as acidulant, flavoring agent, preservative and antistaling agent in food and beverage industry.it is also used as antioxidant, plasticizer and detergent in chemical, cosmetics and cleaning industries.
Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
Cmmdity: Aluminum Fluride (Aluminium fluride) ther name: Aluminum trifluride Frmula:AlF3 M.W.:83.98 Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released. Specificatin: grade chemical cmpsitin % Physical character F Al N2 Fe2342- P25 LI Bulk dity g/cm3 AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5 AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3 AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7 AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7 Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc. Brief Intrductin f the Prductin Technics In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water. Packaging packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.
Commodity: Ammonium nitrate porous prills Molecular formula: NH4NO3 Molecule Weight: 80 CAS: 6484-52-2 UN:1942 Hazardous class:5.1 Commodity: Ammonium nitrate porous prills 1.Production of granular porous ammonium nitrate for industrial use and agricultural granular ammonium nitrate. Products with low moisture content, not easy to cake; high compressive strength, not easy to break; high oil absorption rate. Ammonium nitrate content is more than 99%, the appearance is white granular crystals, no impurities visible to the naked eye. 2. Purpose: Explosive material: granular ammonium oil explosive is made by mixing porous ammonium nitrate with raw oil. Its speed can reach more than 3 200 m/s. This explosive has strong explosive power, safe and reliable use, low price, cost saving, and can usually reduce the cost by 20%-40%. At present, this kind of explosive has been widely used in mining, construction, railway and highway construction, agricultural and water conservancy construction and national defense and other fields. 3. Product specifications: Specifications: Appearance white granule Particle size 0.5-2.5mm NH4NO3 >99.5% N >34% Oil absorption > 8% Moisture < 0.2% PH >4
Commodity: Potassium Permanganate Molecular formula:KMnO4 Molecule Weight:158.03 CAS:7722-64-7 EINECS:231-760-3 UN 1490 Hazard Class: 5.1 Physical State: Needle-like lustrous and dark purple crystal. It can dissolve in water, and it is a strong oxidant. Melting Point :270 C ,decompound Specific Gravity :2.703 ,Solubility in water :6.4 g/100 mL (20C) ,Stability :Stable under ordinary conditions Use Mainly used in medical industry, water treatment, metallurgical industry, chemical industry and food industry. Quality Standard Item Standard BP2000 Appearance purple noodle crystal Purity 99.3% min Chloride 0.01% max Sulfate 0.05% max Insoluble matter in water 0.15% max Moisture 0.5% max As 20 ppm max Cd 50 ppm max Cr 50 ppm max Hg 10 ppm max Pb 50 ppm max Se 50 ppm max Ni 50 ppm max Sb 50 ppm max Packing and Storage Packing: 50kg net weight new galvanized drums with P.E. Liner. Stored in a cool, ventilated, dry place.
1. Product name: Ammonium bisulfite solution 2. Molecular formula: NH4HSO3 3. Molecular weight: 99.10 4. Physical and chemical properties: light yellow liquid, with a little sulfur dioxide odor. Relative density (70%) : 1.4. 5. Technical index: Item Photographic grade Appearance clear light yellow liquid Content w/w % 68-72 pH value (stock solution 20C) 4.0-6.0 Iron (Fe) w/w % 0.001 6. Packing: 270kg plastic drum, 1.25MTS/IBC 7. Uses: in synthesizing dye intermediate, surfactant, herbicide, reducing agent in pharmaceutical industry, etc.
Sorbitol liquid 70%, CAS no.50-70-4, also known as glucitol, manufacturing process from purified glucose as material via hydrogenation refining and concentration. It appears as a colorless liquid, used as a food sweetener. Uses: food-grade liquid sorbitol can also be used as a sweetener in home brewing, cheeses, processed fruit, dried vegetables, fat spreads, and baked goods. Sorbitol liquid is also used in modern cosmetics as a humectant and thickener. Sorbitol is also used in some toothpastes and mouthwashes. As an experienced Sorbitol liquid manufacturer and supplier, we has been supplying and exporting Sorbitol liquid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Categories Sweeteners Qty in 20 FCL 25000kg Min Order 1000kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC E No. E420 CAS No. 50-70-4 HS Code 382460 Specification FCC/USP Sorbitol liquid 70% Technical grade Specification Item Specification Our control Appearance Transparent, sweety,viscidity qualified Dry solds,% 69.0-71.0 70.0 Sorbitol content(based on dry basis),% 70.0 70.0 Ph value 5.0-7.5 5.0-7.5 Specific Gravity (Relative density(d2020)) 1.285-1.315 1.285-1.315 Reducing Sugars(based on dry basis),% 0.21 0.15 Total Sugars(based on dry basis),% 8.0 8.0 Residue on ignition,% 0.10 0.10 Refraction Rate 1.4575-1.4620 1.4605 Conductivity Rate 10 s/cm 10 s/cm Heavy metal 5PPM 5PPM Lead(base on pb) 1PPM 0.5PPM As (base on As) 2PPM 1PPM Chlorid(base on Cl) 10PPM 10PPM Sulphate(base on SO4) 50PPM 20PPM Nickel(base on Ni) 2PPM 1PPM Total Aerobic Plate Count 1000cfu/ml ﹤100cfu/ml Yeast &Mold 100cfu/ml 100cfu/ml E-Coli Absent(cfu/g) confirms Salmonella Absent(cfu/25g) confirms assess qualified with the standard (It is a non-crystalline liquid)REMARKS: This product complies with the Standard (according to with the FAO/WHO standard 1988). Fit for human consumption.
Applications: Chlorine manufacturing In petrochemical manufacturing Rubber manufacturing Caustic Soda manufacturing In animal feed In curing of hides Soap and detergent manufacturing As water softeners In highway or road deicing In textile industries In paper and pulp industries In drilling Packaging: 35 kg per bag 50 kg per bag 1 ton jumbo bag 1.5 tons jumbo bag 2 tons jumbo bag