Free Fatty Acid: 0.1 0.15% max Peroxide Value: 1.0 2.0 meq/kg max Color (Lovibond): 12.0 15.0 Yellow / 1.5 2.0 Red Iodine Value (Wijs): 100 - 122 Moisture: 0.05 %max AOM: 20 hrs min Cold Test: 5.5 - 12 hrs min Refractive Index @ 40oC: 1.460- 1.467 Specific Gravity @ 25oC: 0.914 - 0.920 Saponification Value: 182 - 193 Smoke Point: 460 - 530oF Flash Point: 610 -640oF Fire Point: 670-690oF Fatty Acid Properties:
Product Name: Green Coffee Bean Extract Place of Origin: India Part: Bean Appearance: Fine Yellow Brown to White Powder Extraction Type: Solvent Extraction Specification: Chlorogenic Acid 10%, 20% tested by HPLC Introduction: Green coffee bean has strong anti-oxidant properties similar to other natural anti-oxidants like green tea and grape seed extract. Green coffee beans have polyphenols which act to help reduce free oxygen radicals in the body. Chlorogenic Acid is the compound present in coffee which has been long known as for its beneficial properties.
Physical properties 1. Appearance: No residue at 40 deg. C 2. Cold test: Min.48 hours at 0 deg. C 3. Colour: Max.1.2 red, lovibond tintometer 5/20 inch 4. Refractive index:1.465-1.475 at 40 deg. C 5. Density:0.91-0.92 g/cm3 at 20 deg. C 6. Volatile matter: Max.0.07 % at 105 deg. C 7. Taste : Excellent 8. Odor : None Chemical specifications 1. %free fatty acids (ffa): Max 0.1 2. % ash (*): Max.0.05 3. Saponification value:190.32 koh/g. Of oil 4. Iodine value:134.13 (wijs-hanus method) 5. Peroxide:0.2 meq/KG. Of oil 6. % soap:0.0005 7. % unsaponifiable matter: Max.0.12 8. Impurities: None 9. % saturated fat(-ty acids):8-12 10. % unsaturated fat(-ty acids):87-91 11. Feeding energy:900kcal 12. Iron : < 0.02 mg/lt 13. Fatty acid composition : C14:0 :0.06 C16:0 :5.77 C18:0 :4.1 C18:1 :27.3 C18:2 :59.2 C20:0 :0.27 C18:3 :0.25
Product Name: Isopropyl myristate INCI Name: ISOPROPYL MYRISTATE Molecular Formula: C17H34O2 Molecular Weight: 270.45 Appearance: Clear liquid Purity: 99% CAS NO.: 110-27-0 EINECS No.: 203-751-4 Supplier: ZHENYIBIO Isopropyl myristate (IPM) is a fatty acid ester which is used as solvent in water-in-oil emulsion, oils and fatty based ointments. The use of IPM is recommended in the Sterility Test chapter of the European, Japanese and United States Pharmacopoeia (EP, 2.6.13, JP, 4.06 and USP, 71) as diluent for oils and oily solutions, as well as for ointments and creams. Indeed, its solvent properties improve the filterability of these samples.
Product Name: D-cycloserine Synonyms: D-4-Amino-3-isoxazolidinone Appearance: Off White powder Odor &Taste: Characteristic Test Method: HPLC Specification: 99% min CAS: 68-41-7 Molecular Formula: C3H6N2O2 Molecular Weight: 102.09 Supplier: ZHENYIBIO Uses:D-Cycloserine, It is an antibiotic effective against Mycobacterium tuberculosis. Since the discovery that cycloserine is able to penetrate into the central nervous system, numerous studies have been conducted to assess the efficacy of cycloserine for psychiatric disorders. Main Application of D-cycloserine Powder 1.D-Cycloserine Powder is an antibiotic effective against tuberculosis. 2.D-Cycloserine Powder is mainly used for amino acid infusion, due to special wettability. 3.D-Cycloserine Powder is also used in cold cream, cosmetics.
Sodium gluconate is the sodium salt obtained from gluconic acid. Sodium gluconate is a first-class sequestering agent as it combines excellent stabilizing and chelating properties, particularly under extreme conditions (high alkalinity, high temperatures), with remarkable biodegradability qualities. Sr Test Specification 1 Appearance White Free flowing powder - slightly crystal 2 pH 10 % Solution in water 6.0 to 8.0 3 Purity Min. 98.0 4 Appearance of 10 % Solution in water Clear Solution 5 Moisture Content Max 1.0 Application â?? Surface treatment of metals: removes grease from metals, gives aluminium a satin finish. Adjuvants for concretes where it is used as a slump retention agent. Industrial detergency: cleaning bottles, industrial plant, etc. Excellent Textile Dying. As a chelating agent for cement, plating and alumina dyeing industries. It is used in bar soap products, toothpaste products, depilatory products, shampoos, body wash/cleanser products, liquid hand soap products, foundation products, mascara products, concealers, hair color and bleaching products, sunscreens, skin fading/lightener products, moisturizers, anti-aging products, foams, conditioners, toners, astringents, creams, hair sprays, shampoos, exfoliants, and scrubs.
Specifications Products : Ground Calcium Carbonate Use ; Industrial Use Color : White Form : Powder Packing Type : Plastic Bags Packing Size : 50kgs Purity : 90-99% Whiteness : 88 - 96% Ground Calcium Carbonate Calcium Carbonate is composed of the crystalline mineral, calcite, which occurs naturally in the form of chalk, marble, dolomite or lime stone. Chalk is formed by shells of Nanofossils that is a fine micro crystalline material. Other forms of calcite are also of biogenic origin but more compacted than chalk. Marble deposits are limestone changed by crystallization under conditions of extreme heat and pressure. In some cases, is process yields pure marble of exceptional whiteness. Good quality marble and dolomite deposits are available in the state of Rajasthan (India). High quality stones are manually selected at the mines and after its purity tests, these are sent to the processing centre. During the process the stones are washed to remove impurities. These stones are crushed and grinded as per the customers' requirement. The powder is further processed to micronize varying micron size up to 5 microns top cut. After micronizing it is subject to a process of unique surface coating with fatty acids or suitable coupling agents. The coated products become hydrophobic which increase the compatibility with polymers and other organic based Additives. The processing techniques at PEEKAY MINERALS ensures consistent quality, control of top-cut and average particle size and freedom from impurities at pocket friendly costs. On demand at PKM coated Ground Calcium Carbonate is made available. Coating with Stearic acid or Titanates coupling agent is being carried as per choice of end users. Application: Paints & Powder coatings Paper & Boards Printing Inks PP, LLDPE and LDP compounds PVC master batches and compound Features: Free from impurities Less Reactive Good dispersion Unique particle size Improved brightness and opacity Good Mechanical and flow properties
Silica sand is a primary component in the manufacturing of glass. It is a very important raw material for standard and special glasses. The chemical purity of silica sand is the principal determinant of strength, colour and clarity. It is used to produce flat glass for building and automotive uses and for container glass that stores food and beverages. It reinforces glass fibres and required for the production of fibreglass insulation. It is applied in speciality glasses that include test tubes, scientific tools, television and CRT monitors, and also in incandescent and fluorescent lamps. Calcium silicate bricks For manufacturing calcium silicate bricks, silica sand is mixed with high calcium lime with a sand to lime ratio of 10 or 20. These bricks contain good regularity, smooth faces, and sharp corners with a wide variety of strength. The durability of calcium silicate bricks is similar to concrete and is not resistant to sulphur containing environments. Silica sand for water filtration Silica sand is an effetive filtration bed in the removal of contaminants in both processing of wastewater and in the filtration of the drinking water. Silica sand neutralizes the acidic elements to maintain optimal pH balance in water filters. As it is chemically inert, it will not react when exposed to acids, contaminants, volatile organics or solvents. Metal Casting & Production Silica sand is an essential part of the production of steel, ferrous and nonferrous foundry industries for de-oxidation and grain refinement. For obtaining desired internal or external shapes, metal parts are cast in silica sand. It is a preferred choice for castings that involve cast iron, steel, titanium and also used to clean the casting surfaces. Paints & Coatings Silica sand constitutes of high-performance properties such as brightness, reflectance, oil absorption and colour-consistency. These properties help to improve the overall appearance and durability of industrial and architectural paints and coatings. Its low oil absorption nature improves finishing colour that makes a durable coating rich in pigments. Silica fillers improvement retention and also provide resistance to dirt, mildew, weathering and cracking
SunCo is made from selected fresh palm fruit which is directly processed through 5 process stages, namely 2 filtering processes and 3 prevention processes to produce good cooking oil with the following evidence: 1. Most Clear It doesn't turn black quickly and doesn't oxidize easily, thereby minimizing the risk of cancer 2. His character is like water Through organoleptic tests, SunCo was proven to flow easily and not stick to the throat. 3. Not Easy to Freeze SunCo is a cooking oil with low saturated fatty acid content, thereby minimizing the increase in bad cholesterol (LDL). Available in various packaging: - Refill 500 ml - Refill 1 Liter - Refill 2 Liter - Bottle 1 Liter - Bottle 2 Liter - Bottle 5 Liter - Jerrycan 5 Liter
Biological fulvic acid, also known as fulvic acid, is extracted from plants bodies, weathered coal, peat, etc, using special bacteria biological fermentation and chemical treament technology. It is a kind of short carbon chain molecular material extracted from natural plants, with high loading capacity and physiological activity. Fulvic acid contains small molecule aromatic carboxylic acid chemical compounds, its main components containing fulvic acid, amino acid, trace element, etc. It also contains biological active substances and plant endogenous hormone including nucleic acid, salicylic acid, carbohydrates, indole acids, collagen, etc.
We are specialized in offering superior quality Silica Sand that is acid soluble bridging agent. It is used in manufacturing of glass, fillers & extenders, abrasives & polishes, silica bricks, specialty coatings, ceramics rubber and optics. It is processed keeping in mind international quality standards and is offered at very affordable price to the clients. Features Of Silica Sand Purity Highly effective Quality tested Easily soluble
Product Code : 1BPG50ST Product Name : Black Pepper Ground US #50 Steam Sterilized Description 100 % pure ground of black pepper, specially processed from dried, immature fruits of perennial tropical vine of Lampong Piper nigrum L Country of Origin : Indonesia Common Name : Lada Hitam (Indonesia), Black Pepper (English) Botanical Name : Piper Nigrum L Plant Part : Used Seeds ANALYTICAL/PHYSICAL Odor Characteristic, spicy aroma / hot sharp pungent taste Color/Appearance : Greyish white with some darker brown spect of medium coarse powder Infestation Shall be free from any pest / insect infestation Moisture Content : (%) Max. 12.0 Volatile Oil : (%) Min. 1.0 Ash on Dry Basis : (%) Max. 7.0 Acid Insoluble : Ash on Dry Basis (%) Max. 1.0 Foreign Material : (%) Max. 0.2 Particle size : (%) Min. 95 Through US #50 MICROBIOLOGICAL DATA Total Plate Count : (cfu/g) Max. 50.000 Yeast and Mold : (cfu/g) Max. 1.000 E. coli : (cfu/g) Not Detected Coliform : (cfu/g) Not Detected Salmonella : (cfu/50g) Negative METHODS Testing methods : Asta Method Packaging : Polyethylene inner bag with three-ply kraft paper outer bag STABILITY AND STORAGE 12 Months when stored properly on the following conditions: Recommended storage temperature: 20-32oC Recommended storage humidity (RH) : 50-60 % Keep in dry and airy place with no direct sunlight exposure ï?¼ No extreme treatments whichcould destroypackaging protection capacity ï?¼ Use all after opening the packaging
Product Code : 1LBG40ST Product Name : Black Pepper Light Berries Ground US #40 Steam Sterilized Description : 100 % ground of black pepper, specially processed from dried,immature fruits of perennial tropical vine of Lampong Piper nigrum Country of Origin : Indonesia Common Name : Lada Hitam (Indonesia), Black Pepper (English) Botanical Name : Piper Nigrum L Plant Part : Used Seeds Analytical/physical : Odor Spicy aroma, hot sharp pungent taste, typically of Black Pepper Characteristic Aroma. Color/Appearance : Pale black/grey particle with a finner greyish dispersed particle Infestation Shall be free from any pest / insect infestation Moisture Content (%) : Max.12.0 Volatile Oil : (%) : Min. 1.0 Ash on Dry Basis (%) : Max. 8.0 Acid Insoluble Ash on Dry Basis (%) : Max. 1.0 Particle size (%) : Min. 95 Through US #40 MICROBIOLOGICAL DATA Total Plate Count (cfu/g) : Max. 100.000 Yeast and Mold (cfu/g) : Max. 500 E. coli (cfu/g) : Not Detected Coliform (cfu/g) : Not Detected Salmonella (cfu/50g) : Negative METHODS Testing methods : ASTA METHOD PACKAGING Polyethylene inner bag with three-ply kraft paper outer bag STABILITY AND STORAGE 12 Months when stored properly on the following conditions: Recommended storage temperature: 20-32oC Recommended storage humidity (RH) : 50-60 % Keep in dry and airy place with no direct sunlight exposure ï?¼ No extreme treatments whichcould destroypackaging protection capacity ï?¼ Use all after opening the packaging
Product Code : 1BPW03NS Product Name : Black Pepper Whole 550 G/L Non Steam Sterilized Description Pure genuine whole black pepper, dried green berries of Piper Nigrum L. a wet tropical perennial glabrous woody climbing vine, Belongs to the family of Piperaceace. Country of Origin : Indonesia Common Name : Lada Hitam (Indonesia), Black Pepper (English) Botanical Name : Piper Nigrum L Plant Part : Used Seeds ANALYTICAL/PHYSICAL Odor Characteristic of black pepper, spicy aroma / hot sharp pungent taste Color/Appearance Bold size peppercorn with a uniform dark brown to pitch black Infestation Shall be free from any pest / insect infestation Moisture Content (%) : Max.12.0 Volatile Oil (%) : Min. 1.5 Ash on Dry Basis (%) : Max. 7.0 Acid Insoluble Ash on Dry Basis (%) Max. 1.0 Light Berries (%) : Max. 3.0 Foreign Material (%) : Max. 1.0 Bulk Density (g/L) : Min. 550 MICROBIOLOGICAL DATA Total Plate Count (cfu/g) : NA Yeast and Mold (cfu/g) : NA E. coli (cfu/g) : NA Coliform (cfu/g) : NA Salmonella (cfu/25g) : NA METHODS : Testing methods ASTA METHOD Packaging : Polyethylene inner bag with three-ply kraft paper outer bag Stability And Storage : 24 Months when stored properly on the following conditions: Recommended storage temperature : 20-32 C Recommended storage humidity (RH) : 50-60 % Keep in dry and airy place with no direct sunlight exposure No extreme treatments
Product Code : 1BPW03ST Product Name : Black Pepper Whole ASTA 550 g/l Steam Sterilized Description Pure genuine whole black pepper, dried green berries of Piper Nigrum L. a wet tropical perennial glabrous woody climbing vine, Belongs to the family of Piperaceace. Country of Origin : Indonesia Common Name : Lada Hitam (Indonesia), Black Pepper (English) Botanical Name : Piper Nigrum L Plant Part : Used Seeds ANALYTICAL/PHYSICAL Odor Characteristic of black pepper, spicy aroma / hot sharp pungent taste Color/Appearance : Bold size peppercorn with a uniform dark brown to pitch black Infestation Shall be free from any pest / insect infestation Moisture Content (%) : Max. 12.0 Ash on Dry Basis (%) : Max. 7.0 Acid Insoluble Ash on Dry Basis (%) : Max. 1.0 Light Berries (%) : Max. 3.0 Foreign Material (%) : Max. 1.0 Bulk Density (g/L) : Min. 550 MICROBIOLOGICAL DATA Total Plate Count (cfu/g) : Max. 50.000 Yeast and Mold (cfu/g) : Max. 500 E. coli (cfu/g) Not Detected Coliform (cfu/g) : Not Detected Salmonella (cfu/50g) : Negative Methods : Testing methods ASTA METHOD Packaging : Polyethylene inner bag with three-ply kraft paper outer bag STABILITY AND STORAGE 12 Months when stored properly on the following conditions: Recommended storage temperature : 20-32oC Recommended storage humidity (RH) : 50-60 % Keep in dry and airy place with no direct sunlight exposure
Product Code : 1LBG40ST Product Name : Black Pepper Light Berries Ground US #40 Steam Sterilized Description 100 % ground of black pepper, specially processed from dried, immature fruits of perennial tropical vine of Lampong Piper nigrum L Country of Origin : Indonesia Common Name : Lada Hitam (Indonesia), Black Pepper (English) Botanical Name : Piper Nigrum L Plant Part : Used Seeds ANALYTICAL/PHYSICAL Odor Spicy aroma, hot sharp pungent taste, typically of Black Pepper Characteristic Aroma. Color/Appearance Pale black/grey particle with a finner greyish dispersed particle Infestation Shall be free from any pest / insect infestation Moisture Content (%) : Max.12.0 Volatile Oil (%) : Min. 1.0 Ash on Dry Basis (%) : Max. 8.0 Acid Insoluble Ash on Dry Basis (%) : Max. 1.0 Particle size (%) Min. 95 Through US #40 MICROBIOLOGICAL DATA Total Plate Count (cfu/g) : Max. 100.000 Yeast and Mold (cfu/g) : Max. 500 E. coli (cfu/g) : Not Detected Coliform (cfu/g) : Not Detected Salmonella (Cfu/50g) : Negative Methods Testing Methods : Asta Method Packaging : Polyethylene inner bag with three-ply kraft paper outer bag Stability And Storage : 12 Months when stored properly on the following conditions: Recommended storage temperature : 20-32 C Recommended storage humidity (RH) : 50-60 % Keep in dry and airy place with no direct sunlight exposure No extreme treatments which could destroy packaging protection capacity Use all after opening the packaging
Product Code : 1BPW04NS Product Name : Black Pepper Whole ASTA 570 G/L Non Steam Sterilized Description : Pure genuine whole black pepper, dried green berries of Piper Nigrum L. : a wet tropical perennial glabrous woody climbing vine, Belongs to the family of Piperaceace. Country of Origin : Indonesia Common Name : Lada Hitam (Indonesia), Black Pepper (English) Botanical Name : Piper Nigrum L Plant Part : Used Seeds ANALYTICAL/PHYSICAL Odor Characteristic of black pepper, spicy aroma / hot sharp pungent taste Color/Appearance : Bold size peppercorn with a uniform dark brown to pitch black Infestation Shall be free from any pest / insect infestation Moisture Content (%) : Max.12.0 Volatile Oil (%) : Min. 1.5 Ash on Dry Basis (%) : Max. 7.0 Acid Insoluble Ash on Dry Basis (%) : Max. 1.0 Light Berries (%) : Max. 2.0 Foreign Material (%) : Max. 1.0 Bulk Density (g/L) : Min. 570 MICROBIOLOGICAL DATA Total Plate Count (cfu/g) : NA Yeast and Mold (cfu/g) : NA E. coli (cfu/g) : NA Coliform (cfu/g) : NA Salmonella (cfu/25g) : NA Methods : Testing Methods Asta Method Packaging : Polyethylene Inner Bag With Three-ply Kraft Paper Outer Bag Stability And Storage : 24 Months When Stored Properly On The Following Conditions Recommended storage temperature : 20-32 C Recommended storage humidity (RH) : 50-60 % Keep in dry and airy place with no direct sunlight exposure No extreme treatments which could destroy packaging protection capacity Use all after opening the packaging
Product Code 1BPW04ST Product Name Black Pepper Whole ASTA 570 g/l Steam Sterilized Description Pure genuine whole black pepper, dried green berries of Piper Nigrum L. a wet tropical perennial glabrous woody climbing vine, Belongs to the family of Piperaceace. Country of Origin : Indonesia Common Name : Lada Hitam (Indonesia), Black Pepper (English) Botanical Name : Piper Nigrum L Plant Part : Used Seeds ANALYTICAL/PHYSICAL Odor Characteristic of black pepper, spicy aroma / hot sharp pungent taste Color/Appearance Bold size peppercorn with a uniform dark brown to pitch black Infestation Shall be free from any pest / insect infestation Moisture Content (%) : Max. 12.0 Volatile Oil (%) : Min. 1.5 Ash on Dry Basis (%) : Max. 7.0 Acid Insoluble Ash on Dry Basis (%) : Max. 1.0 Light Berries (%) : Max. 2.0 Foreign Material (%) Max. 1.0 Bulk Density (g/L) Min. 570 MICROBIOLOGICAL DATA Total Plate Count (cfu/g) : Max. 50.000 Yeast and Mold (cfu/g) : Max. 500 E. coli (cfu/g) : Not Detected Coliform (cfu/g) : Not Detected Salmonella (cfu/50g) : Negative METHODS : Testing methods ASTA METHOD PACKAGING : Polyethylene inner bag with three-ply kraft paper outer bag STABILITY AND STORAGE : 12 Months when stored properly on the following conditions: Recommended storage temperature : 20 - 32oC Recommended storage humidity (RH) : 50-60 % Keep in dry and airy place with no direct sunlight exposure No extreme treatments which could destroy packaging protection capacity Use all after opening the packaging
Product Code 1CAB20ST Product Name : Cassia BRC VO 2,0 % Steam Sterilized Description Cassia broken from selected dried stems inner bark grade KB of evergreen tree of the tropics and subtropics Cinnamomum burmannii which belongs to the family Lauraceae Country of Origin : Indonesia Common Name : Kayu Manis (Indonesia), Cassia (English) Botanical Name : Cinnamomum burmannii Plant Part : Used Bark ANALYTICAL/PHYSICAL : Odor Most fragrant, pleasing odor, mildly pungent taste, sweet, warm, typically of Cinnamon characteristic aroma Color/Appearance ; Yellowish to pale brown dried stem's inner bark broken Infestation Shall be free from any pest / insect infestation Moisture Content (%) Max. 14.0 Volatile Oil (%) : Min. 2.0 Ash on Dry Basis (%) : Max. 7.0 Acid Insoluble Ash on Dry Basis (%) : Max. 1.0 Foreign Material (%) : Max. 0.5 MICROBIOLOGICAL DATA Total Plate Count (cfu/g) : Max. 10.000 Yeast and Mold (cfu/g) : Max. 1.000 E. coli (cfu/g) : Not Detected Coliform (cfu/g) : Not Detected Salmonella (cfu/25g) : Negative METHODS Testing Methods : Asta Method Packaging : Polyethylene Inner Bag With Three-ply Kraft Paper Outer Bag Stability And Storage : 24 Months When Stored Properly On The Following Conditions: Recommended storage temperature: 20-32oC Recommended storage humidity (RH) : 50-60 % Keep in dry and airy place with no direct sunlight exposure No extreme treatments which could destroy packaging protection capacity Use all after opening the packaging
Product Code 1CAB30ST Product Name Cassia : BRC VO 3,0 % Steam sterilized Description Cassia broken from selected dried stems inner bark grade KM of evergreen tree of the tropics and subtropics Cinnamomum burmannii which belongs to the family Lauraceae Country of Origin : Indonesia Common Name : Kayu Manis (Indonesia), Cassia (English) Botanical Name : Cinnamomum burmannii Plant Part : Used Bark ANALYTICAL/PHYSICAL Odor Most fragrant, pleasing odor, mildly pungent taste, sweet, warm, typically of Cinnamon characteristic aroma Color/Appearance : Yellowish to pale brown dried stem's inner bark broken Infestation Shall be free from any pest / insect infestation Moisture Content (%) Max.: 14.0 Volatile Oil (%) : Min. 3.00 Ash on Dry Basis (%) : Max. 7.0 Acid Insoluble Ash on Dry Basis (%) : Max. 1.0 Foreign Material (%) : Max. 0.5 MICROBIOLOGICAL DATA Total Plate Count (cfu/g) : Max. 10.000 Yeast and Mold (cfu/g) : Max. 1.000 E. coli (cfu/g) : Not Detected Coliform (cfu/g) : Not Detected Salmonella (cfu/25g) : Negative METHODS Testing Methods : Asta Method Packaging : Polyethylene Inner Bag With Three-ply Kraft Paper Outer Bag Stability And Storage : 24 Months When Stored Properly On The Following Conditions: Recommended storage temperature : 20 - 32C Recommended storage humidity (RH) : 50-60 % Keep in dry and airy place with no direct sunlight exposure No extreme treatments which could destroy packaging protection capacity Use all after opening the packaging
