Purpose: yarn twisting, double twisting Model: TM160A Year of manufacture: 1984 Number of sections: 15 Number of spindles in a section: 2x6=12 Total number of spindles: 180 Spindle cup sizes: �¸165mm, height 240mm Power consumption: 24kW Guages of the machine: length 26m, width 1m, height 2m. It is powered by electricity and air with a pressure of 5Bar. The machine has no documentation. No spare parts.
Purpose: soaking fabric with a sodium base and washing it Model: KREFELD Year of manufacture: 1979 Factory number: 12103280 Width of the shafts: 2450mm Working width of the shafts: 2200mm Number of tubs in the laundry area: 5 Power consumption: 55kW Drive with 15 DC motors and 3 asynchronous motors. Gauges of the machine: length 36m, width 4m, height 3.5m. It is powered by electricity, steam, water and air with a pressure of 7Bar. The machine has documentation. No spare parts.
Technology: 1. Electron is naturally generated in water using the Principle of Induced Current. 2. Electron is captured and retained in the water. 3. No Electricity Required in the process of Electron Generation. 4. The Natural Method. Features: 1. Rich in electron 2. Rich in super oxygen 3. Alkaline in nature 4. Can be consumed directly 5. Used for industrial applications
Purpose: starching yarn on warping crosna for preparation of weaving basis Model: LC3 Year of manufacture: 1973 Width of the shafts: 2000mm Number of drying cylinders: 7 Number of crosna of the gatter: 14 Power consumption: 18kW Gauges: length with gutter 19m, width 5m. Gatter gauges: length 8m, width 3m. Machine gauges: length 11m, width 5m. It is powered by electricity, steam and air with a pressure of 6Bar. Drying of the starched threads is done with steam. The machine has documentation - incomplete. No spare parts.
The tuning fork crystal oscillator 32.768 khz 12.5pF features: 1 Description: Tuning Fork Quartz Crystal 2ã??Nominal Frequency: 32.768KHz 3ã??Oscillation Mode: Fundamental 4ã??Cutting Mode: x +2�° cut 5ã??Measurement Instrument: S&A 250B(Calculated FL) Tuning fork crystal oscillator Electrical Characteristics: Operation Conditions:3*8 mm 32.768khz watch crystal , cylinder type
The Campbell Hausfeld Shop Air Series compressor is ideal for general compressed air needs, including machine shops, dry cleaners, automotive repair facilities, woodworking shops, or general industrial applications. Features cast iron, 2-stage pump for long life, ASME-certified tank (200 max. PSI) and industrial-duty NEMA motor for reliable service. Mounted and wired motor starter offers fast electrical hookup. Fully enclosed metal belt guard assures safe operation. U.S.A.
11.5 HP 344cc Briggs & Stratton EPA/CARB Approved Engine Electric start 44 inch cutting width Chain debris guards front and back Adjustable cutting height (4â??, 5â??, 6.25â?? and 7.5â??) Breakaway blades Push and pull bars Cutting capacity of 4-8 feet grass height Cuts up to 2 inch thick saplings 18 inch diameter all-terrain wheels Key switch remote controls
This is a powerful 8 KW solution designed for precise and efficient welding of PVC and PU based products. With advanced features and robust construction, this machine ensures reliable performance for high-frequency welding and embossing applications. Anti-Spark Electric System: Equipped with an anti-spark electric system, this machine ensures safe operation and minimizes the risk of electrical hazards, providing peace of mind during usage. Safety Device: The inclusion of a safety device enhances operator safety by providing additional protection during operation, prioritizing the well-being of the user. Special Mechanical Structure: Featuring a special mechanical structure, this machine ensures uniform pressure for PVC welding, resulting in consistent and high-quality welding outcomes. Easy Tuning and Special Protection Circuit: The machine allows for easy tuning, enabling quick adjustments and precise control during the welding process. The special protection circuit safeguards the equipment from electrical fluctuations, enhancing its durability and longevity. Hydraulic Pressure Device: The hydraulic pressure device provides precise control over pressure, making it suitable for welding even challenging alignment products, increasing the versatility of the machine. Model No. BS-602 Power 8 KW Voltage 220V or 380V Input Power 8.5 KVA Frequency 27.12 or 40.68MHZ Maximum Electrode Spacing 160-220mm Working Table 350 x 700mm or 400 x 700mm Temperature Control Range 50-300C Adjustable Welding Time 0-10s Adjustable Table Size 1070 x 1210mm Oil Hydraulic 68no Oil Capacity 30 Ltr. Dimension 1070 x 1680 x 1560 Machine Weight 320 KG
This is a powerful 8 KW solution designed for precise and efficient welding of PVC and PU based products. With advanced features and robust construction, this machine ensures reliable performance for high-frequency welding and embossing applications. Anti-Spark Electric System: Equipped with an anti-spark electric system, this machine ensures safe operation and minimizes the risk of electrical hazards, providing peace of mind during usage. Safety Device: The inclusion of a safety device enhances operator safety by providing additional protection during operation, prioritizing the well-being of the user. Special Mechanical Structure: Featuring a special mechanical structure, this machine ensures uniform pressure for PVC welding, resulting in consistent and high-quality welding outcomes. Easy Tuning and Special Protection Circuit: The machine allows for easy tuning, enabling quick adjustments and precise control during the welding process. The special protection circuit safeguards the equipment from electrical fluctuations, enhancing its durability and longevity. Hydraulic Pressure Device: The hydraulic pressure device provides precise control over pressure, making it suitable for welding even challenging alignment products, increasing the versatility of the machine. Model No. BS-602 Power 8 KW Voltage 220V or 380V Input Power 8.5 KVA Frequency 27.12 or 40.68MHZ Maximum Electrode Spacing 160-220mm Working Table 350 x 700mm or 400 x 700mm Temperature Control Range 50-300�°C Adjustable Welding Time 0-10s Adjustable Table Size 1070 x 1210mm Oil Hydraulic 68no Oil Capacity 30 Ltr. Dimension 1070 x 1680 x 1560 Machine Weight 320 KG
ZL-3 model steam air heater with upper outlet and lower inlet is consists of 9 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan + Fresh air damper + waste heat recovery device + dehumidification fan + electric control system. It is specially designed for supporting downflow drying room/heating rooms. After convert the outside steam heat to heat inside the insulation box through by the fin tube, it�´s mixing with recycle or fresh air, under the action of the fan, it is discharged from the upper outlet into the drying room or heating space. Then cooled air pass through the lower air outlet for secondary heating and continuous circulation. And when the humidity of circulating air reaches the emission standard, the dehumidification fan and fresh air damper will start simultaneously. The exhausted moisture and fresh air implement sufficient heat exchange in the waste heat recovery device, so the moisture is discharged and the fresh air with recovered heat enter the circulation system. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel electric heating finned tube, durable 4. Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 5. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 6ï¼?High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. Integrating the dehumidification and fresh air system, heat loss is extremely small through by the waste heat recovery device. 8. Automatically replenish fresh air
ZL-2 model steam air heater with Left-Right Circulation is consists of 7 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan+ Fresh air damper + electric control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by steam heater. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. 1.Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3ï¼?Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 4. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air
G6 Fully Auto Pallet Wrapper is conveyorized machines for automated unmanned packing lines. Controlled by the same control system. pallets can be automatically wrapped to be protected against dust moisture, and achieve perfect exterior looking, This system has now been widely used to enhance work efficiency, reduce labor cost and raise packing grades ,in industries such as chemicals, electric electronic , food beverage paper making etc.
The horizontal slurry pump is a cantilever centrifugal slurry pump, which is suitable for conveying abrasive or corrosive slurry and is widely used in metallurgy, mining, petroleum, chemical industry, coal, electric power, transportation, river dredging, building materials and municipal engineering and other departments. For PHJ pumps, the wetted parts of the pump are made of rubber materials. Its pump body, pump cover and transmission parts are the same as PH pumps; it is suitable for conveying fine particles and corrosive slurry.
The horizontal slurry pump is a cantilever centrifugal slurry pump, which is suitable for conveying abrasive or corrosive slurry and is widely used in metallurgy, mining, petroleum, chemical industry, coal, electric power, transportation, river dredging, building materials and municipal engineering and other departments. For PHJ pumps, the wetted parts of the pump are made of rubber materials. Its pump body, pump cover and transmission parts are the same as PH pumps; it is suitable for conveying fine particles and corrosive slurry.
Injection molding machine is also known as injection molding machine or injection machine. It is the thermoplastic plastic or thermosetting plastic using plastic molding mold into plastic products of various shapes of the main molding equipment. It is divided into vertical, horizontal and all-electric. The injection molding machine heats the plastic and applies high pressure to the molten plastic so that it shoots out and fills the mold cavity
Under effect of heat and electric field, the exposure of insulation oil contained trace water, gas and particulate matters etc. The use of Full-automatic Double-Stage Vacuum Transformer Oil Purifier is necessary, which will help you maintain optimal oil cleanliness. The series utilize the brand Programmable Logic Controller and alarms and interlocks to provide a fully automatic operation. Manual control of various functions is provided as required. Several Pilot Lights are provided to indicate operational status of key components and alarm conditions.
Sion-NSH-TF-E is explosion-proof type designed for flammable and combustible working conditions in power plant, petroleum, chemistry, coal mining, metallurgy and other industries. Sion-NSH-TF-E adds an explosion-proof system compare to NSH-TF, using comprehensive explosion-proof technology. The components such as heating system, electric control system, motor and solenoid valves etc are well-selected explosion-proof type adapt to different danger lever.
Electric Conductivity - < 0.5 mS/cm (Dutch 1:1.5 method) pH - 5.8 ~ 6.5 Weight - 650g ( +/- 5% ) Size / Dimension - 20*10*4 ~ 5 cms Aging Period - 6 months Sieve Mesh Size - 6mm and 0.5mm Moisture - Less than 15% Sand percentage - less than 5 % Fiber percentage - less than 8% Expansion Volume - Minimum 15 litres/kg MOQ - 24 T
Electric Conductivity. - < 0.5 mS/cm (Dutch 1:1.5 method) pH - 5.8 ~ 6.5 Weight - 5kg ( +/- 5% ) Size / Dimension - 30*30*12 ~ 15cms Aging Period - 6 months Sieve Mesh Size - 6mm and 0.5mm Moisture - Less than 15% Sand percentage - less than 8 % Fiber percentage - less than 8% Expansion Volume - Minimum 15 litres/kg
Used 2011 Yamaha 150 HP 4-Cylinder EFI 4-Stroke 25" (X) Outboard Motor. Model number: F150TXR. Serial number: 63PX1093787. Weight - 487 lbs. 152-155 PSI compression on all four cylinders. 435 Hours Logged on the Computer. New Gear Oil. Has been used in Fresh Water and Salt Water. No Severe Corrosion. Electric Start. Power Tilt/Trim. Controls, Stand, Battery, Propeller, Fuel Tank and Line, are Included.
