Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution.Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. The material will not deform, not dehisce, not changes colour, not metamorphose, and not oxidate while drying. The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. Rapid heating, constant to maintain the required drying temperature. The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes colour, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes colour, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features â?¢ Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. â?¢ Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. â?¢ Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. â?¢ The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. â?¢ The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) â?¢ Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. â?¢ Rapid heating, constant to maintain the required drying temperature. â?¢ The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. â?¢ Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Heat pump energy recovery dehumidifier & dryer working course: In an airtight drying chamber, the heat dry airflow from dryer contact with the surface and absorb the moisture of material by fan; the heat dry airflow absorb moisture become heat humid air, then through dryer the moisture coagulates drip and discharge by drainpipe. The dry airflow after heating by dryer become heat dry airflow again. The moisture of material keeps evaporating, coagulating, and discharging until it reaches the drying standard. Product Features Do not need heating device, lower energy consumption than other drying equipment about 40%~60%. Completely reclaim the latent heat of moist heat and make the air closed-cycle in the drying chamber. This design reduces the energy consumption, avoid environment and man-made pollution. Adopt automatic control system, the temperature can be adjusted according to the different product. The dryer has excellent character for solving many problems such as long time for drying, high temperature, drying unevenly and huge energy consumption. The material will not deform, not dehisce, not changes color, not metamorphose, and not oxidate while drying. The machine is integral structure, and already debugged before delivery. It can be used after connecting to pipeline and electrical source. Application Areas The heat pump energy recovery dehumidify & drying is a method of low temperature (15~45/50/60â??), nearly air dry (5-10%). The evaporating speed of surface is similar to the speed which the inside moisture moves to the surface. This drying method the merchandise remains good quality, nice colour, high level, no pollution and saving resources. The heat pump drying can be widely used in papermaking, packing, printing and storage of tea, candy, foodstuff, ceramic, timber, Chinese traditional medicine, preserved fruit, fish, sausage, seafood, high protein food, varieties seed, edible mushroom, vegetable, fruit, potato chip, ginger slice, peanut, aquatic product, leather and heat sensitive chemical material etc. OTHER INDUSTRIAL PRODUCTION FACILITIES REQUIRING DEHUMIDIFY AND DRYING IN THE PROCESS. Heat Pump Dryer (Direct Fired Dryer) Absorbing the energy of the air by heat pump, heating drying room air, lower energy consumption. Rapid heating, constant to maintain the required drying temperature. The dryer by means of which outward discharge the water vapour saturated hot, then supply fresh air and reheating. Constantly repeated. Notice: the dryer not lower the temperature and not dewatering feature, it only heating air and outward discharge hot air for removing humidity.
Product introduction Working principle: The water powered proportional doing pump takes the flowing pressure water as power, having small water pressure loss, without any other power facilities. It uses waterpower of the proportional pump as engine which drives the piston and the connecting rod inside the proportional pump, sucks up the liquid additive directly and makes it dissolve in the water flow. This device moves up and down in a cylinder. When pressing out the water, it uniformly sucks the additives loaded at the bottom of the container into the water flow through a tube. Repeat the up-and-down motion until the effect is achieved that the additive is added to the flowing water evenly and constantly. Advantages: Works at low flow rate Easy to field maintenance Highly chemical resistant Good blending Highly resistant to UV damage Easy to install No electricity needed Easy to adjust dosing rate Replaceable seals Application: 1, Landscaping/ Horticulture industry: fertilization, storage and pest control for flowers, fruits and vegetables, etc. 2, Livestock/Animal husbandry: the fixed-ratio health dosing for livestock and poultry, such as chickens, ducks, oxen and pigs. 3,Industrial application : water treatment, chemical engineering, metal processing, and fire control, etc. 4,Constant proportion dilution of special solvents, such as smell removal solvent, cooling solvent and lubricating solvent. 5,Vehicle cleaning /Car washing industry, printing industry, hospitals, wine industry and other industries. Products Information: Code Dosage Rate% Flow Rate Range Press Range Dosage Rate Injection Rate DP2504 0.4-4% 25~2500 L/h 0.2~6 bar 1:250~1:25 0.1~100L/h DP2502 0.2-2% 25~2500 L/h 0.2~6 bar 1:500~1:50 0.05~50L/h DPY2502 0.2-2% 25~2500 L/h 0.2~6 bar 1:500~1:50 0.05~25L/h DPY2501 0.2-1% 25~2500 L/h 0.2~6 bar 1:500~1:100 0.25~125L/h DPY2505 1-5% 25~2500 L/h 0.2~6 bar 1:100~1:20 0.25~250L/h DP2510 1-10% 25~2500 L/h 0.2~6 bar 1:100~1:10 0.25~250L/h DPY2520 2-10% 25~2500 L/h 0.2~6 bar 1:50~1:10 0.5~500L/h
ZB6201-5 wholesale metal Mini snap hooks oval swivel hooks snap hooks for keychains and Dog Leash >[PREMIUM QUALITY]:Design improved for more durability, Stable. Pretty easy to snap into place. Perfect match and Good Choice forDirect replacement of original parts. >[FITMENT]: Excellent for quick connect/disconnect. Great for scuba diving, flag pole, keychains, cameras, pet leashes, leather craft products; tie-downs, lifting and securing cables wires, as well as outdoor activities and marine industries. >[QUALITY MATERIAL]: Made of 316/304 stainless steel, the surface is highly mirror polished, corrosion resistant, sturdy and durable and stainless. if you want to install a Bimini top, don't want to trim your existing cover these work well on the mount mounted on the side of the boat. Good quality, heavy weight. > [SPECIAL PROCEDURE]: Adopt the fine grinding mirror polishing, exactly, the corrosion resistance, bright and with good flatness. It's of good quality and fits well. The environment used for Marine fresh water does not rust and still looks brand new. Wudi Zhibo Metals Co., LTD is located in the Wudi town Shandong Province which is beautiful and rich shore of Bohai Sea. Our company possesses the advantaged position on the verge of Qingdao and Tianjin ports. And we have convenient transportation extend in all directions in China, especially to Beijing city. Wudi Zhibo Metals Co., LTD is meanly engaged in the metal products. Our business is a system includes the designing, production, machining and selling. Our products are camlock coupling, rigging hardware, marine hardware, auto accessories ,as well as the machine parts .According to the standards of API ANSI BS DIN JIS, the products are made to pretty , rational construction, superior performance. The material of our products is kinds of stainless steel ,such as 304\316\316L ;aluminum; brass; pp; nylon and carbon steel. The products are used in many area covering the marine transport, petrochemical industry, Pharmaceutical papermaking, food industry ,electricity industry and so on. Our products are exported to America England, France, Canada, Australia, Holland, Japan and Korea, and the domestic market is vast too,which gain many trust and favorable receptions home and abroad. From the established to now, Wudi Zhibo Metals Co., LTD obedience to the idea of "Quality First, Creditable Management " and objective of the "Win-Win", all the staffs are devote to the technological innovation, building enterprise brand ,to meet the needs of the clients. Welcome the friends worldwide to visit our company and make business negotiations.
ZB6308-8 Marine Grade Stainless Steel Eye Plate Boat Pad Eye Oval Eye Plate with Ring ã??Premium Materialã??: These U shaped pad eye hook is made of top grade stainless steel 304, and processed with wire drawing treatment, high gloss, high polished surface. Smooth surface without burrs. Welding firm, and enhance carrying capacity, sturdy and durable. ã??Special Designã??: Our pad eye hook has 4 pre-made holes, which adds stability and sturdiness. The ring is perfect for various buckle links. ã??Dimensionã??: Approx. Eye Plate: 80x 20 x 32mm(L*W*H); Eye Plate Loop Diameter: 8mm(M6); Ring Inner Diameter: 45mm; Eye Plate Thickness: 3mm ã??Widely Useã??: It can be used with various kinds of buckles, quick links and links. Mainly used in boat bolt, roof beam, ceiling fan hook and wood. Great for Suspension Training Straps, Gymnastic Rings, Yoga Swings Hammocks, Boat & Marine Deck Hardware. Wudi Zhibo Metals Co., LTD is located in the Wudi town Shandong Province which is beautiful and rich shore of Bohai Sea. Our company possesses the advantaged position on the verge of Qingdao and Tianjin ports. And we have convenient transportation extend in all directions in China, especially to Beijing city. Wudi Zhibo Metals Co., LTD is meanly engaged in the metal products. Our business is a system includes the designing, production, machining and selling. Our products are camlock coupling, rigging hardware, marine hardware, auto accessories ,as well as the machine parts .According to the standards of API ANSI BS DIN JIS, the products are made to pretty , rational construction, superior performance. The material of our products is kinds of stainless steel ,such as 304\316\316L ;aluminum; brass; pp; nylon and carbon steel. The products are used in many area covering the marine transport, petrochemical industry, Pharmaceutical papermaking, food industry ,electricity industry and so on. Our products are exported to America England, France, Canada, Australia, Holland, Japan and Korea, and the domestic market is vast too,which gain many trust and favorable receptions home and abroad. From the established to now, Wudi Zhibo Metals Co., LTD obedience to the idea of "Quality First, Creditable Management " and objective of the "Win-Win", all the staffs are devote to the technological innovation, building enterprise brand ,to meet the needs of the clients. Welcome the friends worldwide to visit our company and make business negotiations.
Control Systems (DCS, PLC/SPS, CNC) - Panel Controllers - HMI and Display Panels - Industrial PCs - Drives ( Frequency Inverter and Servo) - Motors - Power Supplies Moore Automation Limited adhering to the enterprise concept of excellence, whether it is industrial automation parts, services or delivery efficiency, we are committed to do better. We deliver a variety of parts. Rockwell: Allen-Bradley 1) ControlLogix 1756 series controller 2) CompactLogix 1769 series controller 3) SLC 500 1747 1746 Series Controller 4) PLC-5 1771 1785 series controller 5) ProSoft :MVI69/PS69/MVI56/MVI94/MVI71/MVI46/3150 6) ICS TRIPLEX trusted system ABB: 1) AC800M series controller I/O module 2) AC800F series controller module 3) AC31 series controller module 4) 800xA series modules 5) Bailey INFI 90 module 6) DSQC robot module spare parts 7) Advant OCS system spare parts 8) H&B Freelance Bentley Nevada : 1) Bently 3500 Monitoring system, 2) Bently 3300 Monitoring system, Schneider: 1)Quantum 140 series :Modicon M340 2)Modicon Premium :CPU Processor Module,Communication module,etc Emerson Emerson: 1) Ovation System DCS Card 2) DeltaV system Dual Channel Redundancy Safety System, Redundancy Controller General Electric: 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Invensys Triconex Card: Tricon System Card Invensys Foxboro: I/A Series System Module Honeywell: 1) Alcont 2) Experion LS 3) Experion PKS 4) Experion HS 5) Plant Scape 6) TDC 2000 7) TDC3000 8) TPS Siemens (Siemens): 1) Siemens MOORE 2) Siemens S5 Yokogawa: CS3000 System CPU Controller Module, Analog Module Yaskawa:Robot Servo Controller, Servo Motor, Servo Drive. Rexroth Indramat:I/O module, PLC controller, drive module VIBRO-METER: VM600 MPC4 VM600 CMC16 VM600 IOC4T Vibration Sensor, Speed Sensor, Vortex Sensor, Monitoring System Module Gateway Communication Module. #SLS1C21 Yaskawa Cup Motor UGCMEM-15-MC59 #848INK #SLS1E40 Machine Wedge Leveling Blocks Pads #7003LR #SLS1G60 Baldor Brushless AC Servo Motor Cat-BSM100B-315?0AA 14611LR #SLS1B14 New Festo Part-NEBU-M12W8?-5N-LE8 13236EL
