Model L126TIH Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 360(265)/2,000 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.33 Compression ratio 17 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 67 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.0 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 24 / 19 Fresh water pump type Centrifugal type, driven by gear Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT144H (Dong-I ) Gear ratio 1.83 2.09 2.51 3.08 3.43 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,414 x 933 x 1,077 with M. gear mm 1,683 x 933 x 1,159 Engine dry weight without M/G kg 1,060 with M. gear kg 1,345
Model MD196TI Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 320(235)/2,000 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.33 Compression ratio 16.5 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 61 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.0 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 24 / 19 Fresh water pump type Centrifugal type, driven by gear Sea water pump type Rubber impeller type driven by gear Marine gear Model TK450 (TaePyongYang) Gear ratio 1.97 2.53 3.04 3.42 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,397 x 933 x 1,077 with M. gear mm 1,695 x 933 x 1,155 Engine dry weight without M/G kg 1,009 with M. gear kg 1,329
Model L086TIM Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 315(232)/2300 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111x 139 Mean piston speed (m/sec. ) 10.66 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 62 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 27 / 25 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT110A (Dong-I) Gear ratio 1.77 2.09 2.42 2.82 3.19 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,364 x 919 x 965 with M. gear mm 1,552 x 919 x 1,062 Engine dry weight without M/G kg 790 with M. gear kg 1,015
Model L136T Engine type 4 cycle, In line, direct- injection, water cooled, with turbo charger Rating output (B.H.P) PS(kW)/rpm 200(147)/2200 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111x 139 Mean piston speed (m/sec. ) 10.19 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 37 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 27 / 25 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT90A (Dong-I) Gear ratio 1.61 2.06 2.45 2.82 3.12 3.46 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,351 x 893 x 937 with M. gear mm 1,351 x 893 x 937 Engine dry weight without M/G kg 748 with M. gear kg 938
Model L136 Engine type 4 cycle, In line, direct- injection, water cooled, aspirated naturally Rating output (B.H.P) PS(kW)/rpm 160(118)/2200 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111 x 139 Mean piston speed (m/sec. ) 10.19 Compression ratio 17.6 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 32 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 25 / 23 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT90AF (Dong-I) Gear ratio 1.61 2.06 2.45 2.82 3.12 3.46 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,266 x 875 x 937 with M. gear mm 1,542 x 875 x 963 Engine dry weight without M/G kg 743 with M. gear kg 928
Vehicle technical specification: Engine brand: Zongshen, water-cooled single cylinder, four-stroke Displacements: 250cc Forward/Re speeds: 4 forward, 1 neutral and 1 reverse Start mode: Electrical start Fuel capacity: 10L Vehicle speed: 3-10km/h Brake system: Front and reak brake disc Load capacity: 200kg Seats: 2 People Snow clearing technical specification: Area sweep (Max): 3600-26000 ã?¡/H Rear engine brand: Longcin 420cc, OHV, 4 stroke Power: 9.0kW/3600rpm Transmission mode: Electronic clutch Working width: 150cm / 59â?³ Brush diameter: 55cm / 21.7â?³ Brush rotate speed: 400rpm (max) Working head adjustable angle: Left 25 degrees, right 25 degrees Easy fast assembly: Yes Packing: Iron rack + wooden box Cer.for Europe: CE Standard PCS/Carton: 1PC/2Carton G./N. Weight: 600/500kgaVehicle technical specification: Engine brand: Zongshen, water-cooled single cylinder, four-stroke Displacements: 250cc Forward/Re speeds: 4 forward, 1 neutral and 1 reverse Start mode: Electrical start Fuel capacity: 10L Vehicle speed: 3-10km/h Brake system: Front and reak brake disc Load capacity: 200kg Seats: 2 People Snow clearing technical specification: Area sweep (Max): 3600-26000 /H Rear engine brand: Longcin 420cc, OHV, 4 stroke Power: 9.0kW/3600rpm Transmission mode: Electronic clutch Working width: 150cm / 59 ³ Brush diameter: 55cm / 21.7 ³ Brush rotate speed: 400rpm (max) Working head adjustable angle: Left 25 degrees, right 25 degrees Easy fast assembly: Yes Packing: Iron rack + wooden box Cer.for Europe: CE Standard PCS/Carton: 1PC/2Carton G./N. Weight: 600/500kg Carton size: 300*150*110cm Warranty: One year Carton size: 300*150*110cm Warranty: One year
1.CPU: MediaTek MTK6765 Octa (8)-core 2.3GHz; 2.Operation System: android 12.0; 3.Display & Touch screen: 8 inch Capacitive 10-point Multi-touch G+F+F,Gorilla Corning Gen. 3th glass, IPS FHD screen 1200*1920 Pixels,about 400cd/m2 brightness,Sunlight readable; 4.4G Networks: support 2G GSM: B2/B3/B5/B8, 3G WCDMA: B1/B2/B5/B8,4G TDD LTE:B38/B39/B40/B41,FDD_LTEï¼?B1/B2/B3/B4/B5/B7/B8/B17/B28ABï¼? 5.Two Cameras: Front 5.0MP camera,Rear 13.0MP Camera; 6.Memory & Storage: 6GB ram + 128GB ROM, micro SD card slot support max 512GB; 7.Wireless network: 802.11 a/b/g/n/ac 2.4G+5Ghz dual-band wifi and blutooth V5.0; 8.Navigation and Location: Support GPS / Glonass/ Beidou; 9.Battery: Built-in 3.7V / 10000mAh Lithium Battery; 10.Rugged Durability: Waterproof and dustproof rate: IP68 (Certificated); Ruggedness: comply with MIL-STD-810G,1.2-1.5meter dropproof; 11.Stylus pen: active stylus, support original hand writing,is optional; 12.Work Temperature: -20 C to 60 C (test report Approved), Storage Temperature: -30 C to 65 C; 13.Dimension:About 243*158*23mm, Net Weight: about 739g.
Turbidity ASTM D 4176 Less Than 2,0 Density at 15 C Kg/1 ASTM D 1298 & D 4052 0,8200-0,8800 Density at 20 C Kg/1 ASTM D 1298 & D 4052 0,8064-0,8766 Colour ASTM ASTM D 1500 & D 6045 3,5 max Flash Point �°C ASTM D 93 60,0 min KIN. Viscosity @ 37,8�°C cSt ASTM D 445 2,0 min /6,0 max Copper corrosion @ 100�° C for 3hrs Rating ASTM D 130 1,0 max Distillation ASTM D 86 Recovery @ 360�°C % vol. 90,0 min Pour Point �°C ASTM D 97 + 6,0 max Sulphur Content % weight ASTM D 4294 0,05 max Carbon Residue on 10 % Residue % weight ASTM D 189 0,15 max Sediment by extraction % weight ASTM D 473 0,01 max Ash Content % weight ASTM D 482 0,01 max Water Content % vol. ASTM D 95 0,05 max Total Acid Number mg KOH/g ASTM D 974 0,5 max Strong Acid Number mg/KOH/g ASTM D 974 No-detectable Cetane Index ASTM D 976 45,0 min FAME ASTM D 7371 No-detectable
Expansible graphite is produced by our company high-quality natural phosphorus sheet graphite, after special modification and obtained a flexible graphite product, is an ideal new sealing material, in the petroleum, chemical industry, electric industry, aviation, automobile, ship and instrumentation and other industries dynamic, static sealing has a wide range of applications. Expandable graphite by high temperature instantaneous treatment, scale-like into vermicular, volume can be expanded 100-400 times, this expanded graphite still maintains the nature of natural graphite, and has good molding plasticity, flexible ductility and sealing, is a variety of graphite plates, seals of high quality raw materials, can also be used for metallurgical industry of new protection slag, heating agent. Varieties: 9950250 9980250 9950200 9980200 9550250 9580200 etc Size: 32 mesh 50 mesh 80 mesh 100 mesh -100 mesh -200 mesh -325 mesh Expansion rate: 100-400ml/g Performance: With good expansibility, the finished product has high temperature resistance, radiation protection, heat insulation, lubrication, plasticity, chemical stability Application: Widely used in steel, metallurgy, petroleum, chemical industry, machinery, aerospace, atomic energy and other industrial sectors.
AGREEMENT PROCEDURES 1. SELLER ISSUES SPA & PROFORMA INVOICE FOR BUYER TO REVIEW AND COUNTERSIGN. 2. WITHIN 3 BANKING DAYS BUYER ISSUE DLC MT700 AND AFTER RECEIVE AND CLEARED THE SWIFT AT SELLERâ??S BANK, THEN THE SELLER SUBMIT THE 2% PERFORMANCE BOND WITHIN 5 DAYS AND PRODUCTâ??S POP ISSUING WITHIN 8-12 WORKING DAYS; 3. ONCE THE SHIPPING SCHEDULE IS ANNOUNCED, SELLER'S BANK SWIFT ALL POP COPY/PRODUCT EXPORTATION TRANSACTION DOCUMENTS LISTED BELOW TO BUYER & BUYERâ??S BANK: A. CERTIFICATE OF ORIGIN, B. FRESH SGS/CIQ REPORT, FOR QUANTITY AND QUALITY C. Q88, D. BILL OF LADING (BL) E. ULLAGE REPORT F. MANIFEST REPORT G. VESSEL FORM C H. NOTICE OF READINESS (NOR) I. ESTIMATED TIME OF ARRIVAL (ETA) 4. UPON VESSELâ??S ARRIVAL AND FINALIZATION OF QUALITY & QUANTITY INSPECTION AT DISCHARGE PORT, BUYER RELEASE PAYMENT SAME DAY FOR TOTAL SHIPMENT VALUE IN FAVOUR OF SELLER AND RECEIPT OF THE ENTIRE RELEVANT SHIPPING AND NEW TITLE DOCUMENTS. 5. SUBSEQNACE NEXT PERIOD DELIVERY COMMENCED AS PER AGREEABLE LIFTING.
xpanded graphite is produced by our company high-quality natural phosphorus sheet graphite, after special modification treatment and obtained a flexible graphite product, is an ideal new sealing material, in the petroleum, chemical, electric industry, aviation, automobile, ship and instrumentation and other industries dynamic, static sealing has a wide range of applications. Expandable graphite by high temperature instantaneous treatment, scale-like into vermicular, volume can be expanded 100-400 times, this expanded graphite still maintains the nature of natural graphite, and has good molding plasticity, flexible ductility and sealing, is a variety of graphite plates, seals of high quality raw materials, can also be used for metallurgical industry of new protection slag, heating agent. Varieties: 9950250 9980250 9950200 9980200 9550250 9580200 etc Size: 32 mesh 50 mesh 80 mesh 100 mesh -100 mesh -200 mesh -325 mesh Expansion rate: 100-400ml/g Performance: With good expansibility, the finished product has high temperature resistance, radiation protection, heat insulation, lubrication, plasticity, chemical stability Application: Widely used in steel, metallurgy, petroleum, chemical industry, machinery, aerospace, atomic energy and other industrial sectors.
Chlorinated Polyethylene CPE135A Product Description Chlorinated polyethylene CPE is a high molecular elastomeric material that is chlorinated by HDPE. It is white powder and innocuous. It has excellent anti-flaming, weatherability, lower-temperature flexibility and impact strength, etc. It can be blended with other plastics and rubber, mainly used as PVC impact modifier. Physicochemical Properties Item Unit Index Chlorine Content % 35 ±1 Thermal Decomposition Temperature 165 Bulk Density g/ml 0.5 Volatiles content % 0.3 Particle size % 99 Impurity Particle PC/50g 10 Shore Hardness 70 Tensile Strength MPa 13 Elongation at break % 700 Product Benefits and Application It is widely used in PVC profiles, pipes, pipe fitting, sheets, etc. Storage, Packing & Transportation Packaged in 25kg airproof plastic bag, then in woven bags with quality certificate, the outside of bags is marked with brand, company name, net weight of products, lot identification mark . Avoid insolation , drench. Stored in cool and draughty place, shelf life: Two years.
WILLCOME wound dressing pack debridement type meet the needs of wound care, clinical examination, minor surgery prep and procedure. WILLCOME sterile wound dressing pack debridement type: surgical blade, medical suture needle, non-absorbable surgical suture, tray, plastic tweezers, medical gauze block, iodine cotton ball, alcohol cotton ball, towel, disinfection forceps; The accessories in the package should be pollution-free, no damage, no odor, tasteless phenomenon. Plastic accessories should be smooth, uniform color, without burrs, flash and cracks. Product aseptic supply, ethylene oxide sterilization, ethylene oxide residue should be â?¤10ug/g. In accordance with the needs of customer. we also support customization. Features of Dressing Pack Debridement Type Provide a hygienic package to prevent cross-contamination of wounds and maintain a sterile environment during dressing changes. Suitable for both medical procedures and examinations. Its primary purpose is to clean wounds and replace dressings for patients who have experienced trauma. Self-adhesive bandages: These bandages are easy to apply and have a strong adhesive property. They are used to protect wounds, provide support to muscles, and hold absorbent padding or ice packs securely in place. Absorbent padding: This padding is primarily used as a cushion underneath leg wraps, as a wound dressing, or as a pressure pad to control bleeding. It is available in various forms.
Product Description NGYM-I Rail Waist Grinding Machine Rail waist grinding machine is suitable for grinding works before railway laying, subway maintenance welding and gluing insulated joints construction. This work is one of the heavy workload jobs in the rail welding operation. In the past, it was mainly carried out by hand-held electric grinder or angle grinder, it has led to high labor intensity, low operation efficiency and slow working speed, poor grinding surface quality, serious environmental pollution etc. The rail waist grinding machine is suitable for 50kg/m-75kg/mrails. Specification Model NGYM-I Material Stainless Steel Dimensions (L x W x H) (mm) 1120*430 *780mm Engine petrol engine Max output power 4.0kw/3600rpm Grinding wheel spindle speed 3600rpm Grinding wheel diameter �¦ 100-230mm Grinding wheel size 2-124*106*34.5/18 G-A20 P 7B-45m/s Machine weight 57kg
Makabangko Tribo sa Higaonon Abaca Farmers Association Inc.(MATRIHAFA) with SEC registration #20210100058727-29 from February 2019 up to present is into trading and farming of Abaca Fibers with warehouses in Tignapoloan, Dansolihon, and Bulua all in Cagayan de Oro city ,Philippines. We came to know that your company is in need of High grade Abaca Fibers and we would like to offer you our produce. Complete Details below; ITEMS DETAILS 1. Price per Kilo in Philippine peso S2- 250 I - 230 G-210 All fibers are Baled at 125 Kilos per bale with +2 or -2 variance. All delivered fibers are paid for the total kilos. 2. Delivery Details and Payment CIF. Once the items are shipped, buyers shall and must pay the full amount 3. P.O. Buyer must send purchase order to establish demand. MOQ is 100 tons per shipment of combined grade and we can accommodate 250 tons per month. 4. Payment Bank Transfer via our BDO or Land Bank account provided Buyer will get clearance from BSP Thank you very much and looking forward for your favorable consideration.
We sell Pini Kay fuel briquettes both domestically in Ukraine and for export. We handle production and logistics in-house. Cashless payments are accepted with or without VAT. Our production capacity is 1000 tons per month. We possess a certificate of compliance, a quality passport, and a certificate of origin for the raw materials. The company has been operating since 2016. We have collaborated with EBRD, the European Commission, the UN, and others. We have experience in humanitarian missions. We offer a personalized approach to each client and guarantee timely deliveries. Briquette Specifications: Density: 1.08-1.40 g/cm3 Calorific value: 4800 kcal/kg (+/-10%) Ash content: 0.5-2% Moisture: up to 9% Individual briquette weight: not less than 833 grams Packaging: Packaged in 10 kg thermal film, 96 packages per pallet. The pallet is wrapped with stretch film and secured with straps. Conditions: Minimum order quantity is 23 tons. We believe that warmth and comfort should be accessible to everyone, as it instills confidence and helps face tomorrow without fear. Together with our ambitious team, we create Pini Kay solid fuel briquettes â?? economical, versatile, and environmentally friendly fuel.
This crankshaft lathe with simple structure, easy operation and wide applicability. It is suitable for grinding the crankshaft neck and spindle neck of the engine in automobile, tractor and diesel engine repair shop, and can also be used as an external grinding machine for general external turning. Structural features: A. Machine tool by mechanical, electrical, hydraulic control, manual control. b, the left and right chuck of the base machine tool adopts adjustable cross chuck to improve the installation and adjustment efficiency of the workpiece. c, the workpiece is gripped by the center or chuck, driven by the motor of the head frame, manual feed grinding. d, the table is moving longitudinally-there are manual and maneuverable, and the table can only move quickly when maneuvering for jump gear or adjustment. e, the maximum adjustable vertical direction of the left and right cross chuck 110mm, transverse 2mm, the chuck also has a micro rotation adjustment, its range is 0-30�°. f, workpiece, grinding wheel, workbench, cooling pump, oil pump are driven by a separate motor. g. Hydraulic and electrical interlocking mechanism is adopted for workbench and grinding wheel frame, which can ensure safety no matter in adjustment or grinding due to operational errors. The grinding wheel frame is equipped with reliable protective cover.
expertbinocular * com Product Info for Kenko Lens2scope Adapter for Nikon F Mount (Angled View) Kenko black Lens2scope Adapter for Nikon F Mount is a simple accessory that converts any Nikon F Mount lens into a spotting scope. Its lightweight body houses a compact roof prism, lenses, and an eyepiece just like a traditional spotting scope and with the lens is attached, the whole system acts as a spotting scope. This model features an angled eyepiece that is set at a 45�° angle for more comfortable viewing while sitting, standing or laying. Kenko K-LS10-NFAB Specs Prism System Roof prism Focal Length 10 mm Apparent Field of View 42�° Eye Relief 20 mm Dimensions 7.1 x 4.3 x 3.1" / 18.0 x 11.0 x 8.0 cm Weight 6.5 oz / 185.0 g Packaging Info Package Weight 0.635 lb Box Dimensions (LxWxH) 6.1 x 4.35 x 3.5"
Product Description Product Info for Nikon 8x42 Monarch M7 Binoculars Boasting a wide viewing angle that presents an immersive viewing experience, Nikon's black 8x42 Monarch M7 Binoculars have improved design features compared to previous iterations, with the same focus on comfort and performance the line is known for. Featuring extra-low dispersion glass elements with anti-reflection fully multicoated optics and highly reflective dielectric-coated, phase-corrected roof prisms, complemented by exterior lens coatings that repel water and oil, the Monarch M7 produces bright and clear high-contrast images with true-to-life color and minimal color fringing. Performance Magnification: 8x Objective Lens Diameter: 42 mm Angle of View: 8.3�° (Actual) 60.3�° (Apparent) Field of View: 435' @ 1000 yd / 144.4 m @ 1000 m Minimum Focus Distance: 8.2' / 2.5 m Exit Pupil Diameter: 5.25 mm Eye Relief: 17.1 mm Interpupillary Adjustment: 56 to 72 mm / 2.2 to 2.8" Diopter Adjustment: Yes Focus Type: Center Features Fogproof: Yes, Nitrogen Filled Water Resistance: Waterproof General Dimensions: 5.6 x 5.1 x 2.2" / 14.2 x 13 x 5.6 cm Weight: 23.6 oz / 670 g
Product Description Product Info for Nikon 10x30 Monarch M7 Binoculars Boasting a wide viewing angle that presents an immersive viewing experience, Nikon's black 10x30 Monarch M7 Binoculars have the same focus on comfort and performance as previous iterations with an updated look and compact design. Featuring extra-low dispersion glass elements with anti-reflection fully multicoated optics and highly reflective dielectric-coated, phase-corrected roof prisms complemented by exterior lens coatings that repel water and oil, the Monarch M7 produces bright and clear high-contrast images with true-to-life color and minimal color fringing. Performance Magnification: 8x Objective Lens Diameter: 42 mm Angle of View: 8.3�° (Actual) 60.3�° (Apparent) Field of View: 435' @ 1000 yd / 144.4 m @ 1000 m Minimum Focus Distance: 8.2' / 2.5 m Exit Pupil Diameter: 5.25 mm Eye Relief: 17.1 mm Interpupillary Adjustment: 56 to 72 mm / 2.2 to 2.8" Diopter Adjustment: Yes Focus Type: Center Features Fogproof: Yes, Nitrogen Filled Water Resistance: Waterproof General Dimensions: 5.6 x 5.1 x 2.2" / 14.2 x 13 x 5.6 cm Weight: 23.6 oz / 670 g
