Gravity Air Balancer - 60 Kg To 500 Kg, For Overhead Cranes Max Lifting Height : 30 Mtr Lifting Speed : 9 - 0.25 m/min Stroke : 2 Mtr to 3 Mtr
1.Rectangular digging up to 25â?? x 25â?? 2.Round hole digging up to 12â?? 3.Auto Locking heavy duty manual winch for easy up-down movement 4.Compact Design, Easily Dismantle
Brand - Eckstein Model Name - Electrohydraulic Single Cylinder Grabber Arm - 4 Nos(MS with FRP Coating) Open to close time - 5 to 6 sec Size/Capacity - 1.0CBM Motor - 1.5HP Dead weight - ~350kg Max pay Load - 500kg Power Source - Electric Color - Custom Material - Mild steel and FRP Application - To carry recycling PET Bottles, Bio waste, Less density solid waste etc.
Sizes: 32, 40, 50, 63, 80 Forces upto 20,000 N Lead and ball screw configuration Protection grade IP44 and IP65 Multiple Mounting option 100% duty cycle
Bio-degradable In Nature
Hard & Soft In Nature
Small, Medium, Large In Brown Colour
Teja, Bydagi Types, Soft In Nature
Hard In Structure, Use- Food
Multi Colour, Use - Pooja & Industrial
Sortex, Non-sortex, Paraboild
Vannamei Shrimp
Sudhanafluid pneumatic valve series: butterfly valve The butterfly plate of the butterfly valve is installed in the diameter direction of the pipe. In the cylindrical channel of the butterfly valve body, the disc shaped butterfly plate rotates around the axis with a rotation angle of 0 �°~90 �°. When the rotation angle reaches 90 �°, the valve is fully open. The butterfly valve is simple in structure, small in volume and light in weight, and only consists of a few parts. Moreover, the valve can be quickly opened and closed only by rotating 90 �°, which is simple to operate. At the same time, the valve has good fluid control characteristics. When the butterfly valve is in the fully open position, the thickness of the butterfly plate is the resistance when the medium flows through the valve body, so the pressure drop generated by the valve is very small, so it has good flow control characteristics. The butterfly valve has two sealing types: elastic seal and metal seal. For elastic sealing valves, the sealing ring can be embedded on the valve body or attached to the periphery of the butterfly plate. The valve with metal seal is generally longer than the valve with elastic seal, but it is difficult to achieve complete sealing. The metal seal can adapt to higher working temperature, while the elastic seal has the defect of being limited by temperature. If the butterfly valve is required to be used for flow control, the main thing is to correctly select the size and type of the valve. The structure principle of butterfly valve is especially suitable for making large diameter valves. Butterfly valves are not only widely used in petroleum, gas, chemical industry, water treatment and other general industries, but also used in the cooling water system of thermal power plants. There are two kinds of butterfly valves commonly used: wafer type butterfly valve and flange type butterfly valve. Wafer type butterfly valve uses stud bolts to connect the valve between two pipe flanges. Flange type butterfly valve has flanges on the valve, and bolts are used to connect the flanges on both ends of the valve to the pipe flanges.
â??Product Name: Pneumatic flange ball valve Valve Type: Ball valve Design Standard: GB,ANSI,DIN,JIS Working Pressure: 0~1.6Mpa Medium: water, gas, oil, acid, alkali Medium Temperature: -20�ºC~+180�ºC Port Size: DN15-DN200 Connection: flange Structure: floating full port Body Material: cast steel, stainless steel Seat Material: PTFE Application: water system, waster water system, oil& gas industry Driving Way: Pneumatic actuated Actuator Material: Aluminium Alloy Actuator Model: AT52D-AT115D Action: double-acting Rotary Angle: 90�° Air Pressure: 4~8bar Cylinder Size: 52-115 mm Output Torque : 20-344 NM Working Temperature: -20C~+80C Air Access: G1/4" Warranty: 12 months
Pneumatic valve is a valve driven by compressed air. When purchasing pneumatic valves, only the specification, type and working pressure are specified to meet the purchase requirements, which can be used to control the flow of air, water, steam, various corrosive media, mud, oil, liquid metal, radioactive media and other types of fluids. Sudhanafluid pneumatic valve series: butterfly valve The butterfly plate of the butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical channel of the butterfly valve body, the disc-shaped butterfly plate rotates around the axis and the rotation angle is between 0 �° and 90 �°. When it rotates to 90 �°, the valve plate is fully open. The butterfly valve is simple in structure, small in size, light in weight and only composed of a few parts. It can be opened and closed quickly by rotating 90 �°, and the operation is simple. At the same time, the valve has good fluid control characteristics. When the butterfly valve is in the fully open position, the thickness of the butterfly plate is the resistance when the medium flows through the valve body, so the pressure drop generated by the valve is very small, so it has good flow control characteristics. The butterfly valve has two types of seal: elastic seal and metal seal. Elastic sealing valve, the sealing ring can be embedded on the valve body or attached to the periphery of the butterfly plate. Valves with metal seals generally have a longer service life than those with elastic seals, but it is difficult to achieve complete sealing. Metal seal can adapt to higher working temperature, while elastic seal has the defect of being limited by temperature. If the butterfly valve is required to be used as flow control, the main thing is to select the correct size and type of valve. The structural principle of butterfly valve is particularly suitable for making large-diameter valves. Butterfly valves are not only widely used in oil, gas, chemical, water treatment and other general industries, but also used in cooling water systems of thermal power plants. The commonly used butterfly valves include wafer butterfly valve and flange butterfly valve. Wafer butterfly valve is to connect the valve between two pipe flanges with stud bolts. Flange butterfly valve is to connect the flanges on both ends of the valve to the pipe flange with bolts.
Single-acting/double-acting pneumatic actuator. Size standard: NAMUR standard, ISO5211 standard. Cylinder material: die-cast aluminum. It can be equipped with solenoid valve, limit switch and positioner. Air source pressure 2-8 bar. Applicable occasions: indoor or outdoor installation. Available valves: ball valves, butterfly valves, plug valves. Installation method: any position, 360-degree rotation.
Wenzhou Sudhanafluid JAT type aluminum alloy piston pneumatic actuator bolt 304 stainless steel Ball Valve Butterfly Valve Double Acting Pneumatic Actuator Pneumatic actuators are widely used in ball valves and butterfly valves. Low cost, compact structure and long service life. Pneumatic actuator type: single acting (spring return) or double acting. Color: Orange, Blue, Black, Dark Gray. We accept OEM colors and brands. Pneumatic actuator working pressure: 4~8bar Bottom connection: iso5211 Solenoid valve standard: Namur Pneumatic actuator accessories: limit switch box, solenoid valve, positioner.
Applicable fluid medium: water, air, oil, corrosive chemical liquid For example: piping systems for pure water and raw drinking water, drainage and sewage piping systems, salt water and sea water piping systems, Acid-base and chemical solution systems and other industries. Body material: UPVC Transmission mode: electric; 90 angular stroke rotary electric drive Actuator material: cast aluminum alloy/plastic shell Protection device: overheating protection Action time: 4-30 seconds Nominal pressure: 1.0Mpa Nominal diameter: DN15-200 Protection level: IP65 Fluid temperature: -15�°C - 60�°C (no freezing) Ambient temperature: -25�ºC-55�ºC Power consumption: 8VA-30VA Installation method: installation at any angle (horizontal installation is best for prolonging life) Power supply voltage: standard AC220V, optional DC24V, AC110V Voltage tolerance: ±10%, DC tolerance ±1% Connection method: internal thread, bonding (welding), flange, double union
Pneumatic Sanitary Ball Valve Overview: Pneumatic sanitary ball valve (quick-installation ball valve) is a sanitary valve that meets high-standard manufacturing standards. It is usually connected to the pipeline by a card box and quick-installation method. It can be more convenient for dry disassembly, maintenance and cleaning. Pneumatic sanitary ball valves are made of SUS304 and 318L stainless steel materials. The inner and outer surfaces have been polished and sterilized, and have undergone precise inspection procedures and strict quality management. They can meet the needs of wine, food, biopharmaceutical and other industries. special requirements. The pneumatic sanitary ball valve adopts the all-inclusive F4 seal, which is easy to clean without any dead ends, and has no individual accumulation area. It is completely clean and meets the standards of food hygiene. Pneumatic Sanitary Ball Valve Features: 1. The pore size of the pneumatic quick-loading ball valve is consistent with that of the pipeline, and the surface is smooth without dead ends, and no sediment will be generated; 2. The inner wall of the flow channel is polished and sterilized to fully meet the sanitary standard; 3. Pneumatic sanitary ball valve adopts all-inclusive fluorine-lined (PTFE) sealing form, there is no dead angle and easy to clean: 4. Pneumatic quick-loading ball valves are all made of stainless steel, and the inner wall of the flow channel is 0.5um electronically polished to keep the fluid unimpeded. Application of Pneumatic Sanitary Ball Valve: Pneumatic sanitary ball valves are equipped with solenoid valves, travel switches and other related accessories, which can be used for remote automatic control, and can also be equipped with valve positioners to input 4-20mA signals according to the needs of working conditions, so as to adjust the quality of the pipeline, and the pneumatic hygiene The inner wall of the ball valve is long and smooth, no dead angle, seamless, automatic exhaust and other channels, and it is also very suitable for the needs of cleaning in place. It is widely used in food, sour wine, beverages, dairy products, fine chemical pharmaceuticals and biological engineering, etc. Many industries.
Overview of pneumatic regulating ball valve: According to the structural form, the pneumatic regulating ball valve can be divided into pneumatic O-type regulating ball valve or dynamic V-type regulating ball valve. It is mainly used with the valve positioner to make a press signal according to the input and output 4.20mA, so that Control the rotation opening of the ball valve valve. To achieve the proportional adjustment of pipeline medium pressure, flow rate, liquid door and other parameters, among them, the pneumatic/type adjustment glass closure has knotted and removed shape objects (throwing gaps, which can adjust the flow rate according to the change of the opening area in the middle of the field, and can cut off the fluid Closed by impurities contained in the medium, suitable for the control of pulp, mortar, viscous fluid, Pneumatic regulating ball valve principle: The pneumatic regulating ball valve uses compressed air as the driving force to drive the ball flower to rotate back and forth, so as to achieve the opening and closing of the valve. Size, to achieve different degrees of proportional adjustment to the medium flow. When the pneumatic actuator receives the signal from the control system, it generates a corresponding thrust according to the size of the control force, and pushes the adjustment mechanism to drive the valve core to move, and completes the flow and pressure adjustment of the medium in the pipeline. It has a large rated flow coefficient. , good sealing effect, adjustable performance, etc.