En590 10Ppm Suppliers and Manufacturers

Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation

Ultra-Clean Diesel EN590 10PPM - Engineered for Environmental Excellence! Experience the future of diesel with our EN590 10PPM, a premium fuel designed with low sulfur content to minimize emissions and protect the environment. Ideal for modern engines, it enhances performance while significantly reducing your carbon footprint. Drive clean, drive smart.   Diesel EN590 Ghost - The Invisible Shield for Your Engine! Our Diesel EN590 Ghost variant stands as a testament to innovation, offering superior protection and efficiency for your engine. With advanced formulation to combat wear and tear, it ensures your engine runs smoother, longer. Embrace the ghostly power that keeps you moving forward.

Application of nitrocellulose Nitrocellulose, also known as cellulose nitrate or nitrocellulose, is an organic polymer compound with the chemical formula (C6H7N3O11) n. It is the product of the esterification reaction between cellulose and nitrate, usually in the form of white or slightly yellow cotton fluff, insoluble in water, but soluble in organic solvents such as esters and acetone Nitrocellulose, also known as cellulose nitrate ester, abbreviated as NC, commonly known as nitrocellulose, is the product of the reaction between cellulose and nitrate. Nitrocellulose made from cotton fibers is called nitrocellulose. Nitrocellulose is a white fibrous polymer that is resistant to water, dilute acids, weak alkalis, and various oils. Different degrees of polymerization result in different strengths, but they are all thermoplastic substances. Easy to change color under sunlight and highly flammable. Attention should be paid to safety in production, processing, packaging, storage, transportation, sales, and use.

There are two main types of aviation fuels used by airlines around the world: aviation gasoline and jet fuel, which are suitable for different types of aircraft engines. Aviation gasoline is used as fuel for piston type aviation engines. Due to the fact that jet fuels commonly produced and widely used both domestically and internationally belong to the kerosene type, they are commonly referred to as aviation kerosene, abbreviated as aviation coal.

Agricultural urea N46 46% Properties of urea Urea, also known as carbamide, carbamide and urea. Pure urea is white, tasteless, odorless, needle shaped or prismatic crystal, with a melting point of 132.7 â?? under normal pressure. It is hygroscopic, deliquescent, hydrolyzable, and weakly alkaline. It is made into compound fertilizer with acid fertilizer. Urea is an organic compound composed of carbon, nitrogen, oxygen and hydrogen. It is a white crystal. Urea is one of the simplest organic compounds. The most important use of urea is as fertilizer. Its nitrogen content is more than 46%. After being converted into ammonium carbonate in soil, urea is hydrolyzed and absorbed by plants. It is the nitrogen fertilizer with the highest nitrogen content at present. Molecular formula of urea: CO (NH2) 2, molecular weight 60.06, density 1.335g/cm �³ï¼? The melting point is 132.7 â??. Soluble in water and alcohol, insoluble in ether and chloroform. It is slightly alkaline. It can react with acid to form salt. It has hydrolysis. Condensation reaction can be carried out at high temperature to produce biuret, triuret and cyanuric acid. Heat to 160 â?? and decompose to generate ammonia gas and turn into cyanic acid at the same time. Urea can be hydrolyzed into ammonia and carbon dioxide under the action of acid, alkali and enzyme (acid and alkali need to be heated). Unstable to heat, heat to 150 â??ï½? 160 â?? to deamination to biuret. Urea is easily soluble in water, 105g can be dissolved in 100ml water at 20 â??, and the aqueous solution shows neutral reaction. There are two kinds of urea products: crystalline urea is white acicular or prismatic crystal with strong hygroscopicity; Granular urea is a translucent particle with a particle size of 1~2mm, which has a smooth appearance and improved moisture absorption. Urea is a physiologically neutral fertilizer, which does not leave any harmful substances in the soil and has no adverse effects after long-term application. However, a small amount of biuret, also known as biuret, will be produced when the temperature is too high during granulation, which has an inhibitory effect on crops. Urea is molecular before conversion and cannot be adsorbed by soil, so it should be prevented from being lost with water; The ammonia formed after conversion is also volatile, so urea should also be deeply covered with soil. Urea is the first synthetic organic substance and widely exists in nature, such as 0.4% urea in fresh human feces. The new version of national standard GB/T2440-2017 for urea has been officially implemented since July 1, 2018. Compared with the replaced 2001 standard, certain adjustments have been made. New standard GB/T2440-2017

CASå?·:57-13-6 Urea for vehicles, agricultural urea, urea N46ï¼? When the temperature of urea is below 20 â?? and the relative humidity is below 70%, it will not only not absorb moisture, but also evaporate water and reduce its water content; When the temperature exceeds 20 â?? and the relative humidity is higher than 80%, it starts to absorb moisture, and becomes paste when it is serious. When the air is dried again, it will re agglomerate, which is only inferior to ammonium nitrate. When the urea aqueous solution is at 80 â??, hydrolysis and decomposition reactions will occur, forming ammonium carbamate, ammonia gas and carbon dioxide respectively. Under acid and alkaline conditions, urea will decompose faster when it is heated. Urea is easy to combine with straight chain carbohydrates to form crystalline additional compounds; It forms a variety of double salts with various inorganic compounds, such as Ca (NO3) 2 �· 4CO (NH2) 2, NH4Cl �· CO (NH2) 2, CaChemicalbookSO4 �· 4CO (NH2) 2, MgSO4 �· 4CO (NH2) 2 �· 3H2O, Mg (NO3) �· 4CO (NH2) 2 �· 2H2O, etc; It is easy to form urea phosphate, dicalcium phosphate and water with monocalcium phosphate, namely Ca (H2PO4) 2 �· H2O+CO (NH2) 2 â?? H3PO4 �· CO (NH2) 2+CaHPO4+H2O; With nitric acid, it is easy to form urea nitrate, CO (NH2) 2+HNO3 â?? CO (NH2) 2 �· HNO3, which combines and relaxes the two; It can combine with formaldehyde to form urea formaldehyde compounds (uric acid rubber shrinks), in which the higher proportion of formaldehyde is urea resin, and the lower proportion is slow-release (effective) urea.

Product name Tetramethylurea CAS NO.: 632-22-4 MF: C5H12N2O Structural type: Properties: Colorless transparent liquid. Slightly pleasant smell. It can be miscible with water, petroleum ether and most commonly used organic solvents. Product specification:ï¼?Q/CFH 14-2019ï¼? Items Specification Appearance Colorless Transparent Liquid Mass fraction of tetramethylurea, % â?¥ 99.5 water content,% â?¤ 0.5 Use: It is mainly used as an intermediate of insecticide; Advanced solvent, used in dye and other industries; As an intermediate of surfactant. Packaging, storage and transportation: Galvanized iron drum packaging, 180kg / barrel.

Our company sells the products produced by Chongqing Changfeng Chemical Industry Co., Ltd., the world's largest benzophenone manufacturer; First class quality This product can be used in perfumery to produce perfume fixative. UV absorbers for polymers, photosensitizers for film coatings, and pigments. It can also be used to synthesize antihistamines, bacteriostatic agents, etc. Project Index Melting point 47.5 49.0 Benzophenone purity 99.80 Benzene content 0.030 Benzoic acid content 0.0020 4-methylbenzophenone content 0.030 4-chlorobenzophenone content 0.030 Chroma number APHA 50 Our company provides Benzophenoneï¼?Uv Absorber, Ultraviolet Absorbent, Hindered Amine Light Stabilizer, Light Stabilizer, Uv Absorber, Antioxidant, Optical Brightener, Photoinitiator

Use: It is used as an intermediate in the production of pesticides, ceftiofur and organic chemicals. It is mainly used in the synthesis of sulfadiazine drugs and the production of pesticides, fungicides and herbicides. It is also used in the production of new pesticides, such as dicofone, dicofone, kecaojin, etc .