Poly is a water-soluble synthetic polymer. It has the idealized formula [CH CH]. It is used in papermaking, textile warp sizing, as a thickener and emulsion stabilizer in PVAc adhesive formulations and a variety of coatings. It is colourless and odorless. It is commonly supplied as beads or as solutions in water.
Product Name: 1,3-Propanediol INCI Name: PROPANEDIOL Molecular Formula: C3H8O2 Molecular Weight: 76.09 Appearance: clear Oily Liquid Purity: 99% CAS NO.: 504-63-2 EINECS No.: 207-997-3 Supplier: ZHENYIBIO 1,3-Propanediol is used as a solvent for thin film preparations, in the production of polymers such as polytrimethylene terephthalate, adhesives, laminates, coatings, moldings, aliphatic polyesters, as an antifreeze and in wood paint. It also acts as a reagent for vinyl epoxide synthon, for epoxide ring-opening, for polymerization reactions and for natural product syntheses.
Product Name:Hawthorn Powder,Hawthorn Fruits Powder Place of Origin:Shaanxi Province,China Part of Used:Fruits Appearance:Brown Red Fine Powder, no lumps, no visible impurities Production Method:SD(Spray Drying) Specification:50-400mesh according to customer requests Product Introduction of Hawthorn Powder: Hawthorn Powder is a kind of brown red uniform powder, a powder with certain fluidness, special hawthorn flavor and taste, but without extraneous material evidently apparent to the naked eyes. Our Instant Hawthorn Powder is made from high-quality hawthorn and by the spray drying process including selection, trash extraction, rinsing, grinding, boiling, preparation, dispersing, sterilization and dryness.
Product Name:Watermelon Powder,Watermelon Fruits Powder Place of Origin:Shaanxi Province,China Part of Used:Fruits Appearance:Pale Red Fine Powder, no lumps, no visible impurities Production Method:SD(Spray Drying) Specification:50-400mesh according to customer requests Product Introduction of Watermelon Powder: Watermelon Powder is a kind of light red uniform powder, a powder with certain fluidness, special Watermelon flavor and taste, but without extraneous material evidently apparent to the naked eyes. Our Instant Watermelon Powder is made from high-quality Watermelon and by the spray drying process including selection, trash extraction, rinsing, grinding, boiling, preparation, dispersing, sterilization and dryness.
Product Name: ISOAMYL LAURATE Molecular Formula: C17H34O2 Molecular Weight: 270.45 Appearance: Colorless transparent liquid Purity: 99% CAS Number: 6309-51-9 EINECS number: 228-626-1 Supplier: ZhenYiBio Isoamyl laurate is mainly used as a skin conditioner and emollient in cosmetics and skin care products. Isoamyl laurate is acne-causing, so consumers with sensitive skin should pay more attention. Isoamyl laurate is a polar oil with excellent solvent effect on commonly used UV absorbers and excellent dispersing properties on inorganic toners, making it the first choice for sunscreen products. At the same time, it has a good emollient effect, making the skin moist, plump and shiny.
Paraformaldehyde is a polymer of formaldehyde with the chemical formula (CH2O)n, where n is typically in the range of 8 to 100. It is a white, crystalline solid composed of small, polymeric formaldehyde units. Paraformaldehyde is commonly used as a solid form of formaldehyde, and it has various applications in different fields. Form and Structure: Paraformaldehyde is a low-molecular-weight polymer of formaldehyde, consisting of repeating CH2O units. It is often produced in the form of white, crystalline granules or as a powder. Uses: Fixative in Histology: Paraformaldehyde is commonly used in histology and pathology laboratories as a fixative for preserving biological specimens for microscopic analysis. Disinfectant: It has disinfectant properties and can be used for sterilizing equipment. Crosslinking Agent: Paraformaldehyde is used in the crosslinking of proteins, peptides, and nucleic acids in molecular biology applications. Chemical Synthesis: It serves as a source of formaldehyde in various chemical reactions and syntheses. Handling and Safety: Paraformaldehyde should be handled with care, and precautions should be taken to avoid inhalation, skin contact, or ingestion. When paraformaldehyde is heated, it releases formaldehyde gas, which is a strong irritant. Adequate ventilation and protective equipment should be used when working with paraformaldehyde. Dissolution: To use paraformaldehyde as a fixative or in other applications, it is typically dissolved in water to generate a formaldehyde solution. Storage: Paraformaldehyde should be stored in a cool, dry place away from heat sources and incompatible materials.
Product Name: ISONONYL ISONONANOATE Appearance: Colorless transparent liquid Purity: 99% CAS Number: 42131-25-9 Supplier: ZhenYiBio It is an excellent emollient ester with good ester effect, it softens the skin, keeps it moisturised and protects dry skin. It has excellent compatibility with silicone oil. Miscible with dimethicone.It can solve the problem of low temperature precipitation of silicone oil. It is a stabilizer and coupling agent for silicone oil. It has good dispersing ability for pigments. It is commonly known as synthetic silk oil. It has extremely high solubility for silicone oil (colloidal silicone oil is also soluble), very stable in silicone oil-containing formulations, and shows moisturizing without greasy feeling. Used in skin care products, foundation cream, oily powder, etc. Proposed dosage: sunscreen foundation, makeup, skin care, makeup remover oil: 1-5%
Product Name: Tremella polysaccharides INCI Name: TREMELLA FUCIFORMIS POLYSACCHARIDE Other name: hyaluronic acid natural sources; Treme-HA Purity: More than 92% Appearance: White or Off-white power Soluble: Soluble in water, easily dispersed in glycerol and propylene glycol Recommended dosage: 0.01%-0.5% Application: anti-aging, moisturizing, repairing skin care products. CAS: 9075-53-0 Package: 1KG, 5KG Supplier: ZHENYIBIO Treme-HA hyaluronic acid, also known as tremella polysaccharide, is a new type of plant-derived high-efficiency moisturizer extracted and refined from the fruiting bodies of Treme-HA, with a molecular weight of 1 to 1.3 million. It is the only plant-derived humectant with a molecular weight of over 1 million.
Product Name: Carboxymethyl cellulose Other Name: CMC;carmellose E466 Molecular Formula: C6H12O6 Molecular Weight: 180.15588 Appearance: White fine powder Purity: 99% CAS NO.: 9000-11-7 EINECS No.: 618-326-2 Supplier: ZHENYIBIO Carboxymethyl cellulose (CMC) is tackifier, at room temperature, it is non-toxic tasteless white flocculent powder, it is stable and soluble in water, aqueous solution is neutral or alkaline transparent viscous liquid, it is soluble in other water-soluble gums and resins, it is insoluble in organic solvents such as ethanol. Carboxymethyl cellulose is the substituted product of cellulosic carboxymethyl group. According to their molecular weight or degree of substitution, it can be completely dissolved or insoluble polymer, the latter can be used as the weak acid cation of exchanger to separate neutral or basic proteins.
Product Name: Maltodextrin Other Name: MALTODEXTRIN;DEXTRIN ON SEPHAROSE;DEXTRIN TYPE I;DEXTRIN TYPE II Molecular Formula: C12H22O11 Molecular Weight: 342.29648 Appearance: yellow powder Purity: 99% CAS Number: 9050-36-6 EINECS number: 232-940-4 Supplier: ZHENYIBIO Maltodextins are purified, concentrated, nonsweet, nutritive carbohydrates made by hydrolyzing com starch. It occurs as a white, slightly hygroscopic powder, as granules of similar description, or as a clear to hazy solution in water. Powders or granules are freely soluble or readily dispersible in water. A solution of maltodextrin is characterized by a bland flavor, smooth mouthfeel, and short texture, and can partially or totally replace fat in a variety of formulations. Maltodextrins can also be used to replace fats in extruded high fiber cereals and snacks. Theyare currently used commercially for fat replacement in salad dressings, dips, margarine, and frozen desserts. As fat replacers, maltodextrins furnish only four calories per gram, while fats furnish nine calories per gram.
HPMC hydroxy propyl methyl cellulose RDP/RPP/VAE re-dispersible polymer powder.
Wrist Splint (Stable) AJY-S10 For wrist or distal forearm fractures, functional fixation of wrist arthroplasty. However, the dorsal side of the wrist needs to be exposed (if there is a wound on the volar side). 275*175*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy
Elbow Joint Splint (AJY-S12) It is used for elbow joint fixation for tendon, soft tissue, and nerve injury in the elbow joint in time for postoperative fixation of the joint. 448*260*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy
Finger fixing splint (tubular type) AJY-S01 Tubular finger fixation for phalangeal fractures, knuckle dislocations, ligaments, tendon injuries and fixation. 190*120*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy
Achilles tendon dorsal splint (AJY-S11) It is used for dorsal fixation after Achilles tendon injury, topological fixation of supporting foot. 442*247*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy
Wrist Splint (Simple Type) AJY-S04 For wrist soft tissue injury, wrist arthritis and functional position fixation. 303*193*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy
Thumb plate (tubular type) AJY-S03 For the first metacarpophalangeal joint, thumb phalanx, metacarpal fracture and wrist dislocation fixation. 210*145*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy
Product Name: Dimethyl Sulfoxide Other Name: sulfinylbis (methane);DMSO;DIMETHYL SULFOXIDE;DIMETHYL SULPHOXIDE Molecular Formula: C2H6OS Molecular Weight: 78.13 Appearance: Corlorless liquid or corlorless crystals Purity: 99% CAS Number: 67-68-5 EINECS number: 200-664-3 Supplier: ZHENYIBIO Dimethyl sulfoxide (abbreviated DMSO) is a sulfur-containing organic compound; molecule formula: (CH3) 2SO; It exhibits as colorless, odorless, hygroscopic and flammable transparent liquid at room temperature. It has both high polarity as well as high-boiling point. It also has aprotic and water-miscible characteristics. It has low toxicity, good thermal stability, and is not miscible with paraffin. It is soluble in water, ethanol, propanol, ether, benzene and chloroform and many other kinds of organic substance and is called as the "universal solvent." It is a common organic solvent which has the strongest dissolving ability. It can dissolve most the organic compounds including carbohydrates, polymers, peptides, as well as many inorganic salts and gases. It can dissolve certain amount solute whose weight is equals to 50-60% of itself (other common solvents usually only dissolve 10-20%), so it is very important in the sample management as well as high-speed screening of drugs. Under certain conditions, contact between dimethyl sulfoxide and chloride can even lead to explosive reaction.
Wrist Splint (Conventional) AJY-S05 For wrist or proximal forearm fractures, functional position fixation in wrist arthroplasty, and rest position system for wrist arthritis and other lesions Dynamic or lunate dislocation and colles fracture fixation. 270*192*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy
Hand function position fixed splint (AJY-S09) It is used for the fixation of stable fractures of the hand and wrist, the fixation of neuromuscular and tendon injuries, and the fixation of functional positions after orthopaedic surgery. Prevent deformity caused by bone and joint disease in thumb-to-finger and palm-to-hand positions shape. 337*170*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy
