Calcium carbide Gas yield:270-305l/kg steel drum. Size:2-4mm, 2-10mm, 4-15mm, 15-25mm, 25-50mm etc.
Tri. Lobe Roots Blower Bore Size: 25 to 400mm (1 to 16 inch) Air Flow: 0.1 to 280 m3/min Pressure: Vacuum Pump: up to 5000 mmAq gauge vacuum
Boring bar sleeve Available in sizes of o.D.- 40mm & 32mm With match i.D. - dia. 32, 25, 20, 16, 12, 10, 8, 6 Also made as per customer requirement
Lap Joint flanges are used on piping fitted with lapped pipe or with lap joint stub ends. The lap joint flange with the stub end assembly are normally used in systems requiring frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially eases the erection of large diameter or unusually stiff piping. These flanges are also used in applications where there is a need to facilitate bolt alignment. These type of flanges are similar to slip-on flanges. The only difference is that it has a curved radius at the bore and face to accommodate a lap joint stub end. They may be used at all pressures and are available in a full size range. These lap joint flanges slip over the pipe, and are not welded. They are otherwise fastened to it. Here the bolting pressure is transferred to the gasket by the pressure of the flange against the back of the pipe lap. DIMENSION SPECIFICATIONS AS PER THE INTERNATIONAL STANDARD ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE SIZE : ½" to 48" (As Per Customer Requirement) CLASS : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6, 10, 16, 25, 40 Etc MATERIAL GRADE: Carbon Steel Lap Joint Flange : ASTM A105, ASTM A 694 F42 Low Temperature Carbon Steel Lap Joint Flange : A350 LF2/A350 LF3 Copper Alloys Lap Joint Flange : ASTM / ASME SB 61 / 62 / 151 / 152 C 70600 (CU -NI- 90/10 C 71500 (CU -NI- 70/30) UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100 C 10200, C 10300, C 10800, C 12000, C 12200 Nickel Alloys Lap Joint Flange : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276 Duplex Lap Joint Flange : ASTM A 182 UNS F 44, F 45, F51, F 53, F 55, F 60,F 61 Stainless Steel Lap Joint Flange : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L Alloy Steel Lap Joint Flange : ASTM SA 182 F1/F5/F9/F11/F22/F91 ADVANTAGE OF LAP JOINT FLANGES: Lap Joint flanges have certain special advantages over other flanges. These are as follows: Lap Joint flanges have the freedom to swivel around the pipe. This facilitates the lining up of opposing flange bolt holes. Lack of contact with the fluid inside the pipe leads to the greater durability of these flanges. In piping systems which corrode or erode quickly, the lap joint flanges may be salvaged for re-use. The pressure-holding capacity of lap joint flanges is little. But it is better than that of slip-on flanges. The Lap Joint works as a backing ring on the stub. The main advantage of lap joint flange is that the bolt holes can be aligned with the matching flange after the welds have been completed. They allow rotational alignment capability. VALUE ADDED SERVICES : Hot Dip Galvanizing Electro Polish Test Certificate As Per EN 10204 - 3.1 & 3.2
LV-16 Forged Steel Gate Valve + Basic Design : API 602 / BS 5352 / ASME B16.34 + Body Wall Thickness : ASME B16.34 or API 602 + Pressure Temperature Rating : ASME B16.34 + Face To Face : API 602 + Body Bore Size : API 602 / ASME B16.34 / ISO 15761 + End Connection: - ASME B16.11(Socket Weld Ends) - ASME B1.20.1(NPT) - ASME B16.25(Butt Weld) - ASME B16.5(Raised Face) + Inspection And Testing: ASME B16.34 + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Marking System: MSS-SP-25 + Option: - Locking Device - Live Loading(Belleville Spring) - Welded Bonnet / Ring Joint Bonnet
LV-16 Forged Steel Check Valve + Basic Design: API 602 / BS 5352 / ASME B16.34 + Body Wall Thickness: ASME B16.34 or API 602 + Pressure Temperature Rating : ASME B16.34 + Face To Face: API 602 + Body Bore Size : API 602 / ASME B16.34 / ISO 15761 + End Connection: - ASME B16.11(Socket Weld Ends) - ASME B1.20.1(NPT) - ASME B16.25(Butt Weld) - ASME B16.5(Raised Face) + Inspection And Testing: ASME B16.34 + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Marking System: MSS-SP-25 + Option: - Locking Device - Live Loading(Belleville Spring) - Welded Bonnet / Ring Joint Bonnet
LV-16 Forged Steel Ball Valve + Basic Design: API 602 / BS 5352 / ASME B16.34 + Body Wall Thickness: ASME B16.34 or API 602 + Pressure Temperature Rating : ASME B16.34 + Face To Face: API 602 + Body Bore Size : API 602 / ASME B16.34 / ISO 15761 + End Connection: - ASME B16.11(Socket Weld Ends) - ASME B1.20.1(NPT) - ASME B16.25(Butt Weld) - ASME B16.5(Raised Face) + Inspection And Testing: ASME B16.34 + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Marking System: MSS-SP-25 + Option: - Locking Device - Live Loading(Belleville Spring) - Welded Bonnet / Ring Joint Bonnet
LV-16 Forged Steel Globe Valve + Basic Design: API 602 / BS 5352 / ASME B16.34 + Body Wall Thickness: ASME B16.34 or API 602 + Pressure Temperature Rating : ASME B16.34 + Face To Face: API 602 + Body Bore Size: API 602 / ASME B16.34 / ISO 15761 + End Connection: - ASME B16.11(Socket Weld Ends) - ASME B1.20.1(NPT) - ASME B16.25(Butt Weld) - ASME B16.5(Raised Face) + Inspection And Testing: ASME B16.34 + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Marking System: MSS-SP-25 + Option: - Locking Device - Live Loading(Belleville Spring) - Welded Bonnet / Ring Joint Bonnet
Our factory specificalzie in all kinds of o-ring kits in nbr, viton, silicone, hnbr, epdm, aflas, ffkm as568 o-rings, jis o-rings kits, o-ring inter diameter from 1mm to 1200mm, cross section size from 0.5mm to 50m including 0.5mm, 1mm, 1.2mm, 1.5mm, 1.78mm, 1.9mm, 2mm, 2.4mm, 2.5mm, 2.62mm, 3mm, 3.5mm, 3.53mm, 4mm, 4.5mm, 5mm, 5.33mm, 5.5mm, 5.7mm, 6mm, 6.5mm, 6.99mm, 7mm, 7.5mm, 8mm, 8.4mm, 8.5mm, 9mm, 10mm, 11mm and so on; Our factory specificalzie in all kinds of o-ring kits in nbr, viton, silicone, hnbr, epdm, aflas, ffkm as568 o-rings, jis o-rings kits, o-ring inter diameter from 1mm to 1200mm, cross section size from 0.5mm to 50m including 0.5mm, 1mm, 1.2mm, 1.5mm, 1.78mm, 1.9mm, 2mm, 2.4mm, 2.5mm, 2.62mm, 3mm, 3.5mm, 3.53mm, 4mm, 4.5mm, 5mm, 5.33mm, 5.5mm, 5.7mm, 6mm, 6.5mm, 6.99mm, 7mm, 7.5mm, 8mm, 8.4mm, 8.5mm, 9mm, 10mm, 11mm and so on;
Our factory specificalzie in all kinds of o-ring kits in nbr, viton, silicone, hnbr, epdm, aflas, ffkm as568 o-rings, jis o-rings kits, o-ring inter diameter from 1mm to 1200mm, cross section size from 0.5mm to 50m including 0.5mm, 1mm, 1.2mm, 1.5mm, 1.78mm, 1.9mm, 2mm, 2.4mm, 2.5mm, 2.62mm, 3mm, 3.5mm, 3.53mm, 4mm, 4.5mm, 5mm, 5.33mm, 5.5mm, 5.7mm, 6mm, 6.5mm, 6.99mm, 7mm, 7.5mm, 8mm, 8.4mm, 8.5mm, 9mm, 10mm, 11mm and so on; Our factory specificalzie in all kinds of o-ring kits in nbr, viton, silicone, hnbr, epdm, aflas, ffkm as568 o-rings, jis o-rings kits, o-ring inter diameter from 1mm to 1200mm, cross section size from 0.5mm to 50m including 0.5mm, 1mm, 1.2mm, 1.5mm, 1.78mm, 1.9mm, 2mm, 2.4mm, 2.5mm, 2.62mm, 3mm, 3.5mm, 3.53mm, 4mm, 4.5mm, 5mm, 5.33mm, 5.5mm, 5.7mm, 6mm, 6.5mm, 6.99mm, 7mm, 7.5mm, 8mm, 8.4mm, 8.5mm, 9mm, 10mm, 11mm and so on;
Our factory specificalzie in all kinds of o-ring kits in nbr, viton, silicone, hnbr, epdm, aflas, ffkm as568 o-rings, jis o-rings kits, o-ring inter diameter from 1mm to 1200mm, cross section size from 0.5mm to 50m including 0.5mm, 1mm, 1.2mm, 1.5mm, 1.78mm, 1.9mm, 2mm, 2.4mm, 2.5mm, 2.62mm, 3mm, 3.5mm, 3.53mm, 4mm, 4.5mm, 5mm, 5.33mm, 5.5mm, 5.7mm, 6mm, 6.5mm, 6.99mm, 7mm, 7.5mm, 8mm, 8.4mm, 8.5mm, 9mm, 10mm, 11mm and so on; Our factory specificalzie in all kinds of o-ring kits in nbr, viton, silicone, hnbr, epdm, aflas, ffkm as568 o-rings, jis o-rings kits, o-ring inter diameter from 1mm to 1200mm, cross section size from 0.5mm to 50m including 0.5mm, 1mm, 1.2mm, 1.5mm, 1.78mm, 1.9mm, 2mm, 2.4mm, 2.5mm, 2.62mm, 3mm, 3.5mm, 3.53mm, 4mm, 4.5mm, 5mm, 5.33mm, 5.5mm, 5.7mm, 6mm, 6.5mm, 6.99mm, 7mm, 7.5mm, 8mm, 8.4mm, 8.5mm, 9mm, 10mm, 11mm and so on;
Our factory specificalzie in all kinds of o-ring kits in nbr, viton, silicone, hnbr, epdm, aflas, ffkm as568 o-rings, jis o-rings kits, o-ring inter diameter from 1mm to 1200mm, cross section size from 0.5mm to 50m including 0.5mm, 1mm, 1.2mm, 1.5mm, 1.78mm, 1.9mm, 2mm, 2.4mm, 2.5mm, 2.62mm, 3mm, 3.5mm, 3.53mm, 4mm, 4.5mm, 5mm, 5.33mm, 5.5mm, 5.7mm, 6mm, 6.5mm, 6.99mm, 7mm, 7.5mm, 8mm, 8.4mm, 8.5mm, 9mm, 10mm, 11mm and so on; Our factory specificalzie in all kinds of o-ring kits in nbr, viton, silicone, hnbr, epdm, aflas, ffkm as568 o-rings, jis o-rings kits, o-ring inter diameter from 1mm to 1200mm, cross section size from 0.5mm to 50m including 0.5mm, 1mm, 1.2mm, 1.5mm, 1.78mm, 1.9mm, 2mm, 2.4mm, 2.5mm, 2.62mm, 3mm, 3.5mm, 3.53mm, 4mm, 4.5mm, 5mm, 5.33mm, 5.5mm, 5.7mm, 6mm, 6.5mm, 6.99mm, 7mm, 7.5mm, 8mm, 8.4mm, 8.5mm, 9mm, 10mm, 11mm and so on;
1) Available colors: dark blue, light blue, amber, light yellow, green, pink, purple, red and opaque blackú¼transparent black, gold champagne color new color. 2) Regularly stocked tubing size (diameter x wall thickness): Heavy wall tubing :( ten colors) 25 x 4mm, 32 x 3.2mm, 32 x 4mm, 38 x 3.2mm, 38 x 4mm, 44 x 4mm, 51 x 4mm, 51 x 4.8mm (standard length of tubingú¦1220mm) Light wall tubing :( amber, blue, green colors) 25x1.6mm, 30x2mm, 35x2mm, 40x2mm, 50x2mm, 55x2mm, 55x2.5mm, 60x2mm, 60x2.5mm, 70x2mm, 80x2mm, 85x2mm, 90x2mm, 100x2mm, 110x2.2mm, 120x2.5mm Inner profile tubing (amber, blue, green colors) 30x1.8mm, 35x1.8mm, 40x1.8mm, 45x1.8mm
This is similar to a slip-on Flange in outline, but the bore is counter- bored to accept the pipe. The diameter of the remaining bore is the same as the inside diameter of the pipe. The Flange is attached to the pipe by a fillet weld around the hub of the Flange. An optional internal weld may be applied in high stress applications. Its biggest use is in high-pressure systems such as hydraulic and steam lines. DIMENSION SPECIFICATIONS AS PER THE INTERNATIONAL STANDARD ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE SIZE : ½" to 60" (As Per Customer Requirement) CLASS : 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS DIN Standard ND-6,10, 16, 25, 40 Etc. MATERIAL GRADE : Carbon Steel Socketweld Flange : ASTM A105, ASTM A 694 F42 Low Temperature Carbon Steel Socketweld Flange : A350 LF2/A350 LF3 Copper Alloys Socketweld Flange : ASTM / ASME SB 61 / 62 / 151 / 152 C 70600 (CU -NI- 90/10) C 71500 (CU -NI- 70/30) UNS NO. C 92200, UNS NO. C 83600,UNS NO C 10100 C 10200, C 10300, C 10800, C 12000, C 12200 Nickel Alloys Socketweld Flange : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22, C276 Duplex Socketweld Flange : ASTM A 182 UNS F 44, F 45, F51, F 53, F 55, F 60,F 61 Stainless Steel Socketweld Flange : ASTM 182 F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L. Alloy Steel Socketweld Flange : ASTM SA 182 F1/F5/F9/F11/F22/F91 VALUE ADDED SERVICES : Hot Dip Galvanizing Epoxy Coating Test Certificate As Per EN 10204 - 3.1 & 3.2
Features of two layer parquet floors 1) Wood species: Russian white oak, African iroko, African doussie, Burma teak, Jatoba, merbau, American walnut. 2) Size: 600x70x10/4mm, 900x90x10/4mm, 400-1200x127x15/4mm, 1860x189x20/6mm, 1830x150x15/4mm, 400-1200x127x18/6mm, 900x125x15/4mm, 1860x189x15/4mm, 1860x148x15/4mm, 3) Varnish: high anti-scratch Treffert UV lacquer made in Germany 4) Oil: made in Denmark 5) Glue: eco-friendly Dynea made in Finland 6) Quality warranty: one life time guarantee to the flooring structure and 25 years guarantee to the varnish 7)1mm Micro bevel edge perfect fitting or square edge 8) Square edge with perfect fitting no bevel or micro bevel with tongue & groove 9) Moisture is 8-10% 10) Grade: We can not but offer you the best grade. A)Select grade = Grade AB (70% A +30% B)Natural grade = Grade ABC (50% A + 40% B + 10% C)Rustic grade = Grade BC (60% B + 40% C) White cartons with 2 times waterproof film inside and on Pallets. Customer brand could be printed in the carton.
Features of multi layer engineered wood flooring 1) Wood species: white oak,doussie,iroko,merbau, teak, maple, jatoba, walnut,cherry,wenge,sapele. 2) Size: 600x70x10/4mm, 900x90x10/4mm, 400-1200x127x15/4mm, 1860x189x20/6mm, 1830x150x15/4mm, 400-1200x127x18/6mm, 900x125x15/4mm, 1860x189x15/4mm, 1860x148x15/4mm, 3) Varnish: high anti-scratch Treffert UV lacquer made in Germany 4) Oil: made in Denmark 5) Glue: eco-friendly Dynea made in Finland 6) Quality warranty: one life time guarantee to the flooring structure and 25 years guarantee to the varnish 7)1mm Micro bevel edge perfect fitting 8) tongue & groove with perfect fitting 9) Moisture is 8-10% 10) Grade: We can not but offer you the best grade. A)Select grade = Grade AB (70% A +30% B)Natural grade = Grade ABC (50% A + 40% B + 10% C)Rustic grade = Grade BC (60% B + 40% C) White cartons with 2 times waterproof film inside and on Pallets. Customer brand could be printed in the carton.
Our factory specificalzie in nbr, viton, silicone, hnbr, epdm, aflas, ffkm as568 o-rings, jis o-rings kits, o-ring inter diameter from 1mm to 1200mm, cross section size from 0.5mm to 50m including 0.5mm, 1mm, 1.2mm, 1.5mm, 1.78mm, 1.9mm, 2mm, 2.4mm, 2.5mm, 2.62mm, 3mm, 3.5mm, 3.53mm, 4mm, 4.5mm, 5mm, 5.33mm, 5.5mm, 5.7mm, 6mm, 6.5mm, 6.99mm, 7mm, 7.5mm, 8mm, 8.4mm, 8.5mm, 9mm, 10mm, 11mm and so on; Our factory specificalzie in nbr, viton, silicone, hnbr, epdm, aflas, ffkm as568 o-rings, jis o-rings kits, o-ring inter diameter from 1mm to 1200mm, cross section size from 0.5mm to 50m including 0.5mm, 1mm, 1.2mm, 1.5mm, 1.78mm, 1.9mm, 2mm, 2.4mm, 2.5mm, 2.62mm, 3mm, 3.5mm, 3.53mm, 4mm, 4.5mm, 5mm, 5.33mm, 5.5mm, 5.7mm, 6mm, 6.5mm, 6.99mm, 7mm, 7.5mm, 8mm, 8.4mm, 8.5mm, 9mm, 10mm, 11mm and so on;
Gas yield: 260l/kg, 280l/kg, 285l/kg, 290l/kg, 295l/kg, 305l/kg. Size: 0.3-1mm,0-2mm,2-4mm,1-10mm,1-4mm,3-7mm,3-15mm,4-7mm,4-15mm,4-25mm,7-15mm/,15-25mm/,25-50mm/,50-80mm ,70-100mm, 80-120mm,80-200mm. 22.5MT/20¯FCL 225DRUMS ALSO can packing in your require.
LV-13 Ball Valve + Basic Design: BS 5351 / API 608 / API 6D + Body Wall Thickness: ASME B16.34 / ISO 17292 / BS 5351 + Pressure Temperature Rating : ASME B16.34 +Face To Face: ASME B16.10 / API 6D + End Connection : - ASME B16.5(Raised Face) / ASME B16.11(Socket Weld) / - ASME B1.20.1(NPT) ASME B16.25(Butt Weld) / - ASME B16.34(Ring Joint) + Body Bore Size: ASME B16.34 / API 6D + Flange Size: - ASME B16.5 for 24" & below size - ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) - API 605 Series "B"(For 26" & above size) + Inspection And Testing: - API 598 or ISO 14313(API 6D) / BS EN12266 / API 607, 6FA(Fire Test) + Finishes For Contact Faces of Flanges: ASME B16 5 or MSS-SP-6 + Surface Quality Visual Method: MSS-SP-55 + Sour Service: NACE MR-01-75 or MR-01-03 + Marking System: MSS-SP-25 + Option: Locking Device - Live Loading(Belleville Spring)
LV-14 Ball Valve + Basic Design: BS 5351 / API 608 / API 6D + Body Wall Thickness: ASME B16.34 / ISO 17292 / BS 5351 + Pressure Temperature Rating: ASME B16 34 + Face To Face: ASME B16.10 / API 6D + End Connection: - ASME B16.5(Raised Face) / ASME B16.11(Socket Weld) / - ASME B1.20.1(NPT) / ASME B16.25(Butt Weld) / ASME B16.34(Ring Joint) + Body Bore Size: ASME B16.34 / API 6D + Flange Size: - ASME B16.5 for 24" & below size - ASME B16.47 Series "A" or MSS-SP-44(For 26" & above size) - API 605 Series "B"(For 26" & above size) + Inspection And Testing: API 598 or ISO 14313(API 6D) / - BS EN12266 / API 607, 6FA(Fire Test) + Finishes For Contact Faces of Flanges: - ASME B16.5 or MSS-SP-6 + Surface Quality Visual Method: MSS-SP-55 + Sour Service: NACE MR-01-75 or MR-01-03 + Marking System: MSS-SP-25 + Option: Locking Device + Live Loading(Belleville Spring)
