High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Naphthalene superplasticizer Chemical name: �² Sodium naphthyl sulfonate formaldehyde condensate. Molecular formula: (c10h6ch2naso3) n, n is mainly 9-12. Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete. It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions. 1. early strength admixture - improve construction progress; 2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges; 3. pumping type admixture - transported by pump, such as high-rise buildings; 4. antifreeze admixture - used for winter construction. FDN-A High concentration product with sodium sulfate content no more than 5 percent. FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent. FDN-AII Low concentration product with sodium sulfate content no more than 18 percent. FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost. Usage method: --Powder 0.5%-1.0%, recommended dosage 0.75%; --Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete. --Each batch of goods must be tested to meet the engineering requirements before use. 1. As the requirement of engineer,the dosage can be adjusted after testing. 2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
High Performance Naphthalene Superplasticizer For Concrete CAS No. 9008-63-3 Naphthalene superplasticizer Chemical name: �² Sodium naphthyl sulfonate formaldehyde condensate. Molecular formula: (c10h6ch2naso3) n, n is mainly 9-12. Joyreach Fdn Powder Naphthalene Water Reducing Admixture Superplasticizer for Concrete Package 25kg/50kg Naphthalene superplasticizer has good adaptability to various cements and improves the operability of concrete.FDN has the advantage of high water reducing ratio, non-delayed coagulation, non-air entraining and strong adaptability. It can improve the workability of concrete to a large extent so as to reduce the water consumption for blending. Meanwhile, it can improve the strength of concrete. It is widely used in concrete engineering: highway, railway, bridge, tunnel, power station, dam, high-rise building and other projects.It has good dispersion, water reduction and early-strength effect.Adding naphthalene series superplasticizer into ordinary concrete can improve the physical and chemical properties of concrete, improve the concrete strength, construction speed, project quality, technology and working conditions. 1. early strength admixture - improve construction progress; 2. retarding admixture - prevent cracking of large infrastructure such as airports and bridges; 3. pumping type admixture - transported by pump, such as high-rise buildings; 4. antifreeze admixture - used for winter construction. FDN-A High concentration product with sodium sulfate content no more than 5 percent. FDN-AI Middle concentration product with sodium sulfate content no more than 10 percent. FDN-AII Low concentration product with sodium sulfate content no more than 18 percent. FDN-23 sodium sulfate content no more than 23 percent,cheapest type to save cost. Usage method: --Powder 0.5%-1.0%, recommended dosage 0.75%; --Liquid is 1.0%-2.0%, and the recommended mixing amount is 1.5%. The mixing amount can be appropriately increased according to the grade of concrete. --Each batch of goods must be tested to meet the engineering requirements before use. 1. As the requirement of engineer,the dosage can be adjusted after testing. 2. It can be put into blender with mixing water,making mixing before concrete pouring,the plasticizing effect could be better.
COMPANY PROFILE QUANZHOU TOGETHER ECO TECH CO.,LTD� are devoted to� Popularize 100% Recycled and Biodegradable Non-woven fabric, Provide quality solutions and customer satisfaction through valued-added products and services. biodegradable materials PLA SPUNBOND NON WOVEN FABRIC PLA meltblown nonwoven fabric PLA/PET/RPET SPUNLACE NON-WOVEN RPET Spun-bond nonwoven fabric PET spunbond non-woven fabric RPET stitchbond non woven fabrics SMS/SMMS/SSMMS NON-WOVEN FABRIC FACE MASK.DIAPER.MEDICAL PRODUCT MATERIAL RPET stitchbonded nonwoven bag PLA non woven shopping bag RPET spunbonded non-woven bag What is polylactic acid (PLA)? PLA is not plastic. It is derived from nature. Starch is extracted from plants such as corn and cassava and fermented by microorganisms to produce lactic acid. Lactic acid undergoes an advanced polymerization process to produce a 100% green and safe new polymer material called polylactic acid (PLA). Products made from this material are healthy and safe, non-toxic and odorless, and have no harm to the human body. In addition, if the product is discarded under composting conditions, it can be completely decomposed by microorganisms, eventually generating carbon dioxide and water, and returning to nature. The environment does not cause any pollution, so PLA is recognized as a â??green materialâ?? for low-carbon environmental protection and sustainable development in the 21st century. PRODUCT DESCRIPTION Material: 100% Polylactid Acid Technics : Spunbonded� Weight:� 10-250GSM Width: 160-300-320cm or customized Color:� customized MOQ:� 1tons/white, 5tons/other color Special Process: with UV/Laminated(PP+PE) / Printed /Hydrophilic/pre-cut/Fire treatment Hard or soft finition with nice and shinny surface Main Uses (1) medical and health care cloth: surgical clothing, protective clothing, sterilizing cloth, mask, diapers, sanitary napkin, etc; (2) home decoration fabric: wall cloth, tablecloth, bedspread, bedspread, etc; (3) follow the cloth: lining, bonding,, shaping cotton, various synthetic leather soles, etc; (4) industrial fabrics: filtration materials, insulating materials, cement packaging bags, geotextiles, covering cloth, etc; (5) agricultural cloth: crop protection cloth, seedling cloth, irrigation cloth, thermal insulation curtain, etc; (6) other: space cotton, thermal insulation materials, linoleum, cigarette filters, bags and tea bags, etc.
ZERO+ laundry detergent powder is a revolutionary product designed to meet the needs of environmentally conscious consumers who are seeking effective cleaning solutions without compromising on sustainability. Formulated with a blend of plant-based and naturally-derived ingredients, ZERO+ detergent powder is free from harsh chemicals such as phosphates, chlorine, and synthetic fragrances, making it gentle on both your clothes and the environment. The absence of these chemicals not only reduces the ecological footprint but also minimizes the risk of skin irritation, making it suitable for individuals with sensitive skin. One of the key features of ZERO+ laundry detergent powder is its powerful cleaning performance. Despite being eco-friendly, this detergent is tough on stains, dirt, and odors, ensuring that your clothes come out clean and fresh after each wash. Whether you're dealing with grass stains on your kid's jeans or food spills on your favorite shirt, ZERO+ detergent powder effectively tackles tough stains without the need for pre-treating. Furthermore, ZERO+ detergent powder is designed to be compatible with all types of washing machines, including high-efficiency (HE) models. Its low-sudsing formula ensures efficient cleaning without excessive foam, helping to prevent residue buildup in your machine and maintaining its performance over time. In addition to its cleaning power, ZERO+ laundry detergent powder is committed to sustainability throughout its lifecycle. The packaging is made from recyclable materials, reducing plastic waste and minimizing the product's environmental impact. Moreover, the manufacturing process prioritizes energy efficiency and water conservation, further reducing its carbon footprint. The fragrance-free formula of ZERO+ detergent powder ensures that your clothes are free from artificial scents, making it an ideal choice for those who prefer a more neutral scent or who have sensitivities to fragrances. However, if desired, users have the option to add their preferred natural essential oils for a personalized scent experience. Overall, ZERO+ laundry detergent powder offers a sustainable, effective, and gentle cleaning solution for eco-conscious consumers who prioritize both the cleanliness of their clothes and the health of the planet. With its plant-based ingredients, powerful cleaning performance, and commitment to sustainability, ZERO+ detergent powder sets a new standard for environmentally friendly laundry care.
https:**powertoolsequip*com*products*-Agri%252dFab-Hard%252dTop-Chip%252dN%252dVac-Tow%252dBehind-Lawn-Vacuum*html https://powertoolsequip.com/products/-Agri%252dFab-Hard%252dTop-Chip%252dN%252dVac-Tow%252dBehind-Lawn-Vacuum.html AGRI-FAB HARD-TOP CHIP-N-VAC TOW-BEHIND LAWN VACUUM Price:$886.35 SKU:45-0540 Brand:Agri-Fab Condition:New Weight:1.00 LBS Shipping:Calculated at checkout Product Description Features 208cc Briggs & Stratton Intek Engine Dependable, powerful performance Creates 80 mph suction power Enough power for leaves, pine needles and grass clippings Safety shutoff prevents accidental engine startups Large 26 Bushel/32 Cu Ft Capacity Holds more yard debris - meaning fewer stops Hopper tilts back for easy dumping of yard debris Hard Top Collector Vented to keep dust out of the engine, prevents wear Steel, Side Chipper Hopper Chips branches up to 2" in diameter Converts yard debris into useful mulch Versatile Design Fits over 40 different tractor decks up to 54" wide Templates included (only fits right-side discharge mowers) Additional hose kit (#65640) needed for zero-turn mowers Optional #45-0253 Hose Kit (sold separately) Vacuum debris around shrubs, on patios and under decks Some Assembly Required - Shipped 75% Assembled Specifications Engine Engine Brand Briggs & Stratton Starting System Recoil Start Engine Cycle 4-Cycle CC 208 CCs Fuel Tank Size 1 Gallon Consumer Engine Warranty 1 Year Feed Chute Wood Diameter 2 Inches Feed Type Gravity Number of Blades 2 Blades Replaceable Blades Yes Discharge Chute Bag No Discharge Chute Material Plastic Vacuum Removable Hose No Towing Towable Yes D.O.T. Lights No Fenders Yes Hitch Type ATV/Lawn Mower Hitch Accessories Rear Bagger No Wheels Tire Type Pneumatic Wheels Overview Assembly Required Yes Weight 365 Pounds Product Length 96 Inches Product Width 33 Inches Product Height 62 Inches Consumer Warranty 3 Years Commercial Warranty 90 Days UPC 00052613104705
A-80 2d Omni scanner A9295 2D Wired A-700 barcode scanner Quick scanning without waiting makes work easier!!! Wrinkled barcodes still could be quickly scanned!!! - 300,000 pixels global shutter, with 2M/s Motion Tolerance. - Fast decoding speeds at 120 FPS/s. - Precision: 4 mils (3mils supports customization.) - Easily read the paper, plastic, mobile phones, LCD displays, etc., and even high-precision, wrinkled, damaged, or poorly printed bar codes. - Bright red LEDs for illuminating scanning surfaces. - Read all mainstream 1D&2D bar codes. - Support JPOS/OPOS interfaces â? â??CMOS image fast scanning Up to 200 scans per second, effortlessly handling peak periods. â?¡â??Automatic induction and sleep mode The barcode will automatically light up when approaching, and will be turned off when not in use, waiting for sleep. Scan product barcodes and screen payment code Can be used for daily cash register scanning, mobile phone scanning for payment, and express barcode scanning to meet your different Customized adhesive, printer ribbons ï¼?barcode scanner other products, if you need other specifications, we can feel consult us! Capture any one-dimensional barcode from a distance Wireless Bluetooth function is faster and more compatible Better encryption function enhances security Excellent battery performance increases scanning times Suitable for harsh environments with high dust and humidity Can withstand falling from a height of Quick recognition barcode scanner -2 meters per second motion tolerance and large reading angle. Have strong recognition ability. Fast decoding speed, high recognition rate, both paper and electronic screens can be recognized, and the operation is simple and fast. It can also recognize dirty and damaged codes. A-700 barcode scanner product Features: The A-700 is equipped with advanced software decoding algorithms patented by AiGather, combined with a motion tolerance of 2 meters per second and a large reading angle, providing an extremely smooth decoding experience in barcode scanning and forward scanning. It does not require switching scanning modes and can quickly read various LCD and OLED phone screen codes and printed product codes, expanding the range of decoding applications and improving decoding efficiency. And when not in use, the lights automatically sleep and dim, providing users with a comfortable user experience.
The FPT-01 Friction and Peel Tester is a versatile and multifunctional device designed for various applications: Measurement of Coefficient of Friction: It accurately measures both static and kinetic coefficients of friction for a wide range of materials, including plastic films, sheets, rubber, paper, paperboard, PP woven bags, fabrics, composites, and more. This capability is valuable for understanding how materials interact with each other and with various surfaces. Delicate Peeling Force Test: The tester can perform delicate peeling force tests on materials such as release paper, adhesive tape, medical adhesives, composite films, and protective films. This feature is essential for assessing the ease of separation between different layers of materials, ensuring product quality and performance. The FPT-01 Friction and Peel Tester is a versatile instrument that serves as a valuable tool for quality control, product development, and research in industries dealing with a wide range of materials, from packaging to medical applications. System Description FPT-01 Friction and peel tester has a fixed loadcell position, with a protection cover. A movable plane is installed firmly to ball lead screw. The sled is to put on sample sticking to the plane, which is then connected to loadcell, with a filament. When performing peeling test, as the force is small, the right sample clamp is stuck to plane, using double side type. Then a separation action is performed to peel the sample and force is recorded during the process. Technical Features FPT-01 Friction and peel tester is a PLC-controlled unit with industrial-grade stability and operates through an intuitive HMI touch screen interface. The precision ball lead screw mechanism ensures consistent speed and displacement control. The system offers two distinct testing methods: one for measuring the coefficient of friction (COF) and another for assessing peeling forces. In COF tests, precise free speed settings are available, while peeling tests consider parameters that influence peeling results, such as initial and tail portions. Other features 1. Real-time data analysis and display, including results and graphical curves. 2. Compliance with various test standards. 3. Integration of a dot matrix micro printer. 4. Inclusion of an advanced peeling program. 5. Optional RS232 and software. Major Standards ISO 8295, ASTM D1894, TAPPI T816, ISO 8510-2, ASTM D4917, ASTM D3330, TAPPI T549 Main Parameters Force Range 5N, 10N, or 30N (or others) Accuracy 0.5 F.S. Sled 200�±1g (or as required) Stroke 500mm Test Speed 1~500mm/min Power 110~220V 50/60Hz
Background Impact resistance plays an important role in the performance of material subjected to regular shocking load or impact load. As this kind of load may cause rupture, cracking or deformation. There are various test procedures to evaluate the impact resistance of a material, such as dart impact, ball impact, pendulum impact, izod, charpy, tensile, etc. Application Falling ball impact tester measures the resistance performance of plates, sheets, and composites, films foils, paper etc. with less than 2mm thickness. By impact test, the material ability to resist external destruction can be indicated. User observes the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height. Test Method A steel ball of known mass and diameter is released from a predetermined height, creating a controlled impact force on the test specimen (film or plastic sheet). The impact energy and the resulting damage or deformation are measured and analyzed to assess the material's impact resistance. Factors Influence Result 1. Drop Height: The height from which the steel ball is dropped is a critical parameter that can be adjusted to simulate different impact scenarios. 2. Ball Size and Mass: The size and mass of the steel ball are selected based on the specific testing standards or application requirements. Technical Features FBT-01S is an economic version of ball impact tester, without complicate control and system. It also uses electromagnetic suspension and release, and is equipped with two foot switches too. Sample pneumatic clamping is also the same type and test area as FBT-01. Key Features: 1. Adjustable Impact Height and Various Balls cater to diverse testing scenarios. 2. Electromagnetic Suspension: Employing electromagnetic suspension ensures a controlled and consistent release of the impact ball. 3. Reliable Pneumatic Sample Clamping guarantees that test specimens remain firmly in place throughout testing. 4. User-Friendly Operation: The tester is equipped with two foot switches, simplifying the testing process and enhancing usability. Main Parameters Impact Height 300mm-600mm (can be extended) Ball Diameters(mm) 23, 25, 28.6, 38.1, 50.8(one equipped) Accuracy 0.1g (0.1J) Specimen Clamp Pneumatic Clamp Gas Supply 0.6 MPa �¦8 mm PU Tubing Specimen Size > 150 mm x 150 mm Power Supply AC 110~220V 50Hz
Background Impact resistance plays an important role in the performance of material subjected to regular shocking load or impact load. As this kind of load may cause rupture, cracking or deformation. There are various test procedures to evaluate the impact resistance of a material, such as dart impact, ball impact, pendulum impact, izod, charpy, tensile, etc. Application Falling ball impact tester measures the resistance performance of plates, sheets, and composites, films foils, paper etc. with less than 2mm thickness. By impact test, the material ability to resist external destruction can be indicated. User observes the destruction status of the test specimen after it has been hit by a falling weight that fell from a given testing height. Test Method A steel ball of known mass and diameter is released from a predetermined height, creating a controlled impact force on the test specimen (film or plastic sheet). The impact energy and the resulting damage or deformation are measured and analyzed to assess the material's impact resistance. Factors Influence Result 1. Drop Height: The height from which the steel ball is dropped is a critical parameter that can be adjusted to simulate different impact scenarios. 2. Ball Size and Mass: The size and mass of the steel ball are selected based on the specific testing standards or application requirements. Technical Features The FBT-01 Falling Dart Impact Tester is a system with PLC control (maintaining industrial-grade stability) and is operated via an HMI touch screen interface. Key Features: 1. Precision PLC control and user-friendly touch screen interface 2. Adjustable impact height with a variety of available ball options 3. Display of test results in multiple units 4. Utilizes electromagnetic suspension for automatic ball release 5. Secure sample clamping through pneumatic mechanisms 6. Convenient manual and foot switch operation 7. Equipped with a dot matrix micro-printer 8. Option for advanced professional software (available as an add-on) Main Parameters Impact Height 300mm-600mm (can be extended) Ball Diameters(mm) 23, 25, 28.6, 38.1, 50.8(one equipped) Accuracy 0.1g (0.1J) Specimen Clamp Pneumatic Clamp Gas Supply 0.6 MPa 8 mm PU Pipe Specimen Size > 150 mm x 150 mm Power Supply AC 110~220V 50Hz
Product overview: CRM-8501 is an organic polymer compound of cation quaternary ammonium salt type. The advanced technology and raw materials are from developed countries. The characteristics are as below: The effective concentration is 10 times or 15 times higher than common retention acid liquid. It has better fluidity, easy & fast dissolution, no caking or granularity phenomenon. It has very good adaptability and can adapt to kinds of papers of kinds of pulps. Product function mechanism during the paper-making process 1. To neutralize the paper surface charge. The pulp and filler are of negative charges and the charges can be neutralized and decreased by adding into CRM-8501so as to form micro-floc when the potential towards zero. 2. To be inlaying effect. The electrostatic of positive charge on CRM-8501 surface can attract pulps and fillers whose surface is of negative charges. 3. To be bridging effect. Higher molecular weight and longer enough molecular chain will result in bridging between fines and fillers so as to form micro-floc. 4. The micro-floc of fines and fillers will decrease the porous structure blockages of wet paper layers and increase the permeability properties of papers. Appearance: Milky white liquid Solids content: 38�±1% pH value: 3-6 Viscosity : â?¤ 500 mPa.s Performance characteristics 1. To increase the retention rate of paper fines and fillers dramatically so as to decrease the pulp consuming qty. 2. To decrease the concentration of whitewater, wastage of fines&fillers and the whitewater pollution. 3. To increase the permeability properties of pulp and the wet strength of paper. To increase the production speed of paper-making machines so as to increase the production. 4. Without any pungent odor. And has better fluidity under lower temperature Usage tips Dosage: Around 0.3 kg to 0.8 kg per mt paper ( adjust as per different pulps and production processes) To add CRM-8501 evenly and slowly into dilution tank with ready water. And add additional water till requested qty ( the dilution concentration of CRM-8501 is usually 1-3). To stir the diluted concentration for around 20 to 30 minutes before entering into paper-making system via flow pump. Packing and storage The package is 200 Liters plastic drum or 1000 Liters IBC drums or as per clients' requests. It should be stored between -5C-30C. The shelf life time is 3 months. To wave the CRM-8501 before dilution and the diluted liquid can be stored 3 days at most.
Product overview: Papermaking dry net cleaning agent is the efficient detergent developed and produced by our company to remove dirt and embossing on machine from various papermaking dry net. The product plays many roles in strong wetting, penetration, emulsification, dispersion, suspension, re-deposition resistance, anti-static electricity, etc. For the dry net obstacles which aren't rinsed easily with general cleaning product and the coarse calico with complex ingredients and long circular net dirt, the product can thoroughly remove them by recovering drainability, unchoking hole, improving breathability and running speed of paper machine, reducing energy consumption, improving paper quality and yield, and can save time, labor and water, facilitate operation, without coarse calico damage, equipment erosion, etc. The product can conduct the cleaning of whole forming net on machine according to the specific operation regulations to rapidly and effectively eliminate dirt and completely eradicate embossing; The product can also conduct partial cleaning: There is partial embossing on coarse cotton cloth, it can be rinsed accordingly. The position with embossing can be rinsed in targeted manner to spend little money. The product can obviously prolong the service life of coarse calico for 1-3 times, and reduce the production cost of paper factory, with significant economic benefit. Technical specifications Appearance: Colorless or faint yellow liquid pH value: 10-14 Viscosity(25â??ï¼?:â?¤ 30 mPa.s Solubility: Freely soluble in cold water Performance characteristics 1 The cleaning agent shall be sprayed evenly, and for the part with severe dirt, the consumption of cleaning agent shall be increased. 2 If there is resin adhesive and severe dirt on the surface of dry net, the steam can be added for heating to achieve better using effect. Usage tips Consumption: 0.3-0.5 kg/m2 coarse calico (absolutely dry). Washing device: For one high-level tank equipped with valve at bottom and one shower pipe, the effective spraying width shall be the same as the carpet width, the distance among bore diameters shall match with the spraying time as specified, and the dry net can also be directly sprayed with sprinkling can manually. Packing and storage It is packaged in 200kg or 1000kg plastic barrel and is stored in cool place. Guarantee period: 6 months.
Product overview New efficient environmental protection fungicide is the new patented product developed and researched by our company. The product mainly plays a role in absorbing the negatively charged bacteria by cation through electrostatic force, hydrogen bonding force, hydrophobic combination between surfactant molecules and protein molecules to focus them on the cell wall, further generating chamber resistance effect and causing bacteria death due to inhibition of growth; In the meanwhile, the hydrophobic alkyl can also react to the hydrophilic group of bacteria to change the permeability of membrane, then generates the lysis, destroys the cellular structure and causes the dissolution and death of cells. Such kind of fungicide is efficient, non-toxic, isn't influenced by the change of ph value, convenient in use, strong in stripping slime layer, stable in chemical performance, favorable in dispersion and corrosion inhibition, etc. It can be widely applied in the paper pulp and paper making coating in papermaking industry; For the coating of internal and external wall, sewage treatment, industrial recycling cooling water system, textile industry, etc., it can be directly added to the coating process, or be added to the water slurry system in the paper making process to effectively control the fungus reproduction, paper pulp mildew, etc. Technical specifications Appearance: Colorless to yellowish transparent liquid Proportion: 1.02±0.05 �· pH value: 6-8 �· Solubility: Mutually soluble with water at any proportion Performance characteristics 1. It is efficient, has low toxicity and broad spectrum, and can match with any papermaking chemicals to quickly sterilize for a long time; 2. It is green and environment-friendly, and its decomposer doesn't generate any pollution to environment; 3. It doesn't generate stimulation damage to skin and eyes and doesn't erode equipment. 4. It is widely applicable to the sterilization and algae killing of recycling water, sewage, reinjection water, seawater, etc. Usage tips CRM-8909 fungicide is non-oxidizing efficient fungicide, with general dosing quantity of 100-200g/ ton bone dry pulp, and its usage amount as slime stripping agent reaches 50-150g/l Packing and storage The product is packaged with plastic bucket, and the net weight of every bucket can be 25kg, 50kg and 200kg, and is confirmed according to the requirements of customers. This product shall be stored in a shaded, cool and dry condition at room temperature, Shelf life: 6 months. This product is not dangerous.
Product overview 1. It is composed of polysiloxane, dispersing agent, stabilizer, etc.; 2. It is highly compatible with foaming medium, with rapid defoaming speed and excellent bubble elimination performance; 3. It is easy to disperse in water. Technical specifications Appearance: White to yellowish emulsion pH value: 6ï½?8 Effective ingredients: 99% Performance characteristics 1. Dyeing at normal temperature in textile slurry; 2. Industrial water treatment, coating and pesticide defoaming; 3. Elimination of other aqueous phase bubble with quick defoaming as required; 4. For the oilfield drilling fluid defoaming, the reversion rate of slurry is close to 100%. Usage tips The antifoaming agent has excellent foam elimination and inhibition performance, and can be added to product after foam generation or as foam inhibition components. The additive amount of defoaming agent can be 10~100ppm. The optimal additive amount is determined by customers through test according to specific condition. Defoaming agent product can be used directly or after dilution. If the product can be fully stirred and dispersed in foaming system, and can be directly added without dilution. If it needs to be diluted, it can't be directly diluted with water, otherwise the layering, demulsification, etc. easily occur, thus influencing the product quality. For consequences generated due to direct dilution with water or process of use of the product in other incorrect methods, our company doesn't undertake the responsibilities. Packing and storage �· The product is packaged with 25kg, 50kg, 120kg or 200kg plastic bucket. In case of special requirements, the bucket can be customized through consultation according to the special requirements. �· Its storage temperature shall be at 5~30â??. It shall not be placed near heat sources or insolated in the sunshine. The acid, alkali, salt, etc. shall not be added to product. The container shall be sealed in case of non-use to avoid being polluted by harmful bacteria. If it is layered after being placed for a long time, it shall be stirred evenly, and its using effect isn't influenced. The product would not freeze below 0 . In case of freezing, its using effect isn't influenced after melting and stirring. The guarantee period of product at the suggested storage temperature and without sealing, lasts for 12 months from the production date.
The Tank Cleaning process Involves 6 steps: The 6 stage water tank clean process has been developed through research and development to arrive at a fool-proof process that involves latest state-of-the-art imported equipment Stage I Mechanized Dewatering In the First stage of Mechanized Dewatering of the water tank clean process the Manhole and surroundings are cleaned off dirt, mud and algae after which the water below the foot-valve level is pumped out using special de-watering equipments. Stage II Sludge Removal In the Second Stage of Sludge Removal the sludge which has settled on the floor of the tank is sucked out using our special sludge pumping equipments Stage III High Pressure Cleaning In the Third Stage of High Pressure Cleaning the Walls & ceilings of the tanks are thoroughly cleaned using special high pressure jet cleaners which rid of the walls off calcinations, algae and all contaminants which cling on the internal surface of the tank helping the microbiological contamination to grow. Stage IV Vacuum Cleaning In the Fourth stage of the sludge removal process an Industrial Vacuum Cleaner is used to remove the resultant contaminants, making the tank absolutely speck-free. Stage V Anti-bacterial Spray In the Fifth very important Stage of Anti-bacterial treatment the walls & ceilings are made totally sterile from bacterial attack using specially developed from Antibacterial agents. Stage VI UV Radiation And finally in the Sixth Stage of the water tank clean process final sterilization and disinfection is done using UV Radiation by a specially developed UV Radiator which is used to kill any suspended or floating bacteria remaining in the tank. This full procedure makes the tank 100% Bacteria free and makes it perfectly fit for storing clean drinking water. The above process is common for both the Underground and Overhead drinking water storage tanks and can be used for all types of tanks like Concrete Tanks, Fabricated Steel tanks, Plastic (Sintex Type) Tanks etc. Our professional system also includes maintaining of computerised records of all the tanks which have been cleaned and scheduling of next cleaning operations etc. thus removing the total responsibility off the residents of any particular building to make their life totally healthy and tension free. The total process and the unique combination of the special water tank clean Anti-bacterial agents and UV Radiation used in the process of cleaning and Dis-infection of the drinking water tanks is totally a novel feature of this cleaning process developed, tried and tested by us for the first time in India. If this process is used by all the residents of multi-storied buildings they would never have any health related problems arising out of water borne diseases (provided the water supplied by the authorities is of Potable Quality)
4.Main technical parameters 4.1. Capacity: 5, 10, 20, 25, 50100200kg (optional) 4.2. Unit switching: kg, N, LB 4.3. Load decomposition degree: 1/250,00 4.4. Load accuracy: 0.25% 4.5. Maximum stroke: 1000mm (excluding fixtures) 4.6. Test speed: 30-300 mm/min 4.7. Displacement resolution: 0.01 mm 4.8. Display device: touch screen (capable of displaying and printing test times, test values, maximum values, fracture values, etc.) 4.9. Motor: AC motor 4.10. Overall dimensions (L * W * H): 550 * 500 * 1240mm 4.11. Weight: 80kg 4.12. Power supply: 1 , 220V, 15A or specified 4.13. Delivery: One set of tension fixtures 5. Introduction to System Functions 5.1. It has tensile and pressure testing functions. 5.2. It has a pull stop function. 5.3. It can display displacement, has functions such as elongation, pressure, and other material testing machines. 5.4. There is an automatic stop alarm function for overload load setting. 5.5. It has an automatic save function, and can coexist with manual and automatic testing data up to ten times. 5.6. Use a list format to display the saved test data. 5.7. With an administrator password, users can modify their startup password to make machine management more secure. 5.8. Using software to calibrate the load value is extremely easy to calibrate. 5.9. The internal functions are set with full Chinese prompts, making the operation convenient and simple. 5.10. Rich testing functions, capable of conducting tensile tests, pressure tests, compressive tests, elongation tests, etc. 5.11. Display method: Real time display on the touch screen. 5.12. Tensile range: Standard configuration 200kg (optional). 5.13. The accuracy is 1/25000. 5.14. It can print test data and dates, making it easy to view test data for each stage 5.15. Conversion of three types of force units: N, Kg, and LB. During the testing process, 5 sets of test data at any position can be manually and automatically captured and printed. 7. Introduction This product tests the tensile strength, compressive strength, and elongation of various materials, semi-finished products, and finished products. It can perform tests such as peeling, tearing, bending, bending, and compression, and is suitable for use in industries such as metals, plastics, rubber, textiles, synthetic chemicals, wires and cables, leather, etc. 8. Design standards ASTM D903, GB/T16491, GB/T1040, GB/T8808, GB13022, GB/T 2790/2791/2792, CNS-11888, JIS K6854, PSTC-7, etc
Company info & certificates: Ultima trading is engaged in the production, export and distribution of wood products and agricultural goods to European countries. Thanks to the quality of our products, well-established logistics and customer support from start to finish, we have taken a leading position as an exporter of heating products from Ukraine for 5 years, so more than 50 companies cooperate with us. In 2022, we have significantly increased our production capacity, so we are looking for new partners around the world. All products comply with Ukrainian and European standards, DIN, DIN+. FSC 100% certified products Product description: Unlock the power of Pini Kay Briquettes! With their dense composition, long burn time, and intense heat output, our briquettes deliver exceptional performance for your heating needs. Say goodbye to traditional firewood and embrace the convenience of Pini Kay Briquettes. Experience efficient and eco-friendly warmth that lasts. Upgrade your heating game and enjoy cozy comfort. Order now and revolutionize your winter! Production capacity: - 500 tons per month Price: 220 â?¬/ton Types of wood: - Oak - Pine Techincal info: - Dimensions: �? 60 mm x 330 mm (50x50 mm) - Flame duration: approx. 1 - 1.5 hours - Duration of smoldering: approx. 2-2.5 hours - Caloric content - 4186 - 4723 kcal / kg - Humidity - 3.86%. - Ash content - 0.92 - 0.95%. - Volatile components 78.21 - 81.35% - Sulfur - 0.02%. Advantages: - High heat output, long-lasting. - Low moisture, efficient burn. - Clean and eco-friendly. - Compact and easy to handle. - Consistent quality. - Minimal ash residue. - Versatile for various heating applications. Packaging: - Plastic film (on pallets): 10kg~12 pcs/package - Boxes - Big bags Branding: - Private label leaflets - Private label stickers Lead time: -7 days Delivery info: - inland, by sea - door-to-door delivery - delivery terms: FCA, DAP, DDP, FOB, CFR, CIF Logistics info: - 96 packs/pallet - 960kg/pallet - Truck capacity: 21-23 tons 1. Lump wood charcoal 2. Apple wood charcoal 3. Wood pellets 4. A1 EN Plus wood pellets 5. Nestro wood briquettes 6. Ruf wood briquettes 7. Firewood | nets 8. Firewood | crates 9. Fence posts We are looking for international customers for long-term cooperation!
Ultima trading is engaged in the production, export and distribution of wood products and agricultural goods to European countries. Thanks to the quality of our products, well-established logistics and customer support from start to finish, we have taken a leading position as an exporter of heating products from Ukraine for 5 years, so more than 50 companies cooperate with us. In 2022, we have significantly increased our production capacity, so we are looking for new partners around the world. All products comply with Ukrainian and European standards, DIN, DIN+. Product description: Ignite the perfect fire with Kiln-Dried Firewood! Our premium logs are meticulously kiln-dried for optimal moisture content, guaranteeing easy ignition, consistent heat, and minimal smoke. Experience hassle-free fireside moments and cozy warmth. Upgrade your firewood and enjoy the convenience of Kiln-Dried Firewood. Embrace the essence of relaxation and create unforgettable moments around the fire. Order now and elevate your fireside experience! Production capacity: 20 trucks per month Price: 110â?¬ per box Types of wood: - Softwood: alder, birch - Hardwood: hornbeam, oak, beech Technical data: - Kiln-dried - Moisture: up to 18% - Length: 25cm, 33cm - Diameter: 8-15 cm Advatages: - Low moisture, efficient burn. - High heat output. - Easy ignition, quick fire. - Long burn time. - Clean, minimal ash. - Reduced creosote buildup. - Indoor/outdoor versatility. Packing: - Wooden crates: 1m3-2m3 - Carton boxes - Plastic nets 25L Lead time: -7 days Delivery info: - inland, by sea - door-to-door delivery - delivery terms: FCA, DAP, DDP, FOB, CFR, CIF Logistics info: - 22-24 boxes 2m3 - 42-46 boxes of 1m3 - 2500 nets of 25l nets -22-23 tons per truck Other products by Ultima: 1. Lump Wood charcoal 2. Apple wood charcoal 3. Wood pellets 4. A1 EN Plus wood pellets 5. Pini Kay wood briquettes 6. Ruf wood briquettes 7. Nestro wood briquettes 8. Fencing posts We are looking for international customers for long-term cooperation! - buy firewood, firewood wholesale, buy firewood in bulk, birch firewood wholesale, firewood for business, firewood to buy, 1 cube of firewood price, buy firewood with delivery, cube of firewood price, firewood warehouse, buy chopped firewood, kamaz firewood price, olkh firewood, birch firewood chopped, order firewood, firewood in bags
DAQGPCT485 split core current transformer is a kind of current sensor transformer which can convert AC analog signal into RS485 digital signal launched by Shanghai Data Acquisition IOT Technology Co LTD The product has builtin 32bit ARM series MCU and highprecision metering chip and is a multipoint calibrated current conversion module It has the characteristics of high precision and fast response DAQGPCT485 can directly interact with common data acquisition gateways DTU programmable controller PLC and host computer This product is widely used in AC motor lighting equipment air compressor heating ventilation and air conditioning equipment building selfcontrol system equipment OEE open rate industrial Internet rural power transformation projects and other scenarios of current monitoring and acquisition scenarios 2 Service Concept Our company solemnly promise you You buy more than just products but also meticulous and thoughtful technical support We provide free remote guidance remote configuration and commissioning services and send data to the server specified by the customer Free IOT solution consulting services 3 Product Characteristic Parameters Line Sequence Definition Red12V BlackGND Yellow485A White485B Length of LineDefault 1 meter Acquisition Characteristic Current detection range AC 02A100AOther large range transformers can be customized Electrical Characteristic Power supply mode524V DC Operating power consumption05W Operating frequency5060Hz Communication Characteristic Transmission modeRS485 Communication protocol Modbus RTU Structural Characteristic MaterialABS plastic housing Installation methodBuckle mounting Working Environment Temperature 20C70C Storage Environment Temperature 20C80C 4 The Core Advantages of the Product High precision measuring chip high measurement accuracy Open type design easy to install Easy installation and fast deployment helping IOT projects land quickly 5 Description of the Modbus Communication Protocol 51 Serial Port Communication Parameters Baud rate9600 Data bit8 Verify NONE Stop bit1 52 Function Code Definition The upper computer uses 03 function code to read data or receive alarm data The host computer controls the lower machine equipment transformer using 06 function code
DAQ-GP-CAM is a wireless time-lapse camera based on 4G or WiFi, which can take pictures at certain intervals and upload to FTP server, launched by Shanghai Data Acquisition IOT Technology Co., Ltd. It can be widely used to capture the data of instruments, and can also be used for photo capture and video surveillance in the fields of cultural relics, rock and soil, hydrology and water conservancy. This product supports WiFi/4G Ethernet access to the network, take photos regularly and upload the photos to the designated FTP server or store them in an SD card. With 4G wireless network card, it can be used in scenarios where there is no WiFi network outdoors. 2 Service Concept Our company solemnly promise you: You buy more than just products, but also meticulous and thoughtful technical support. We provide free remote guidance, remote configuration and commissioning services, and send data to the server specified by the customer. Free IOT solution consulting services! 3.1 Camera Parameters and Selection Pixels: 2 million, 3 million, 5 million optional, default 2 million Lens: 2.8mm/4mm/6mm SD card: Yes Power supply: 12V DC Weight: 0.35kg 3.2 Electrical Characteristics Power supply mode: 12V DC or battery power (Power interface: DC5.5*2.1mm female socket, internal positive and negative outside). 3.3 Communication Characteristics Default networking mode: Ethernet/WiFi, 4G Image upload: FTP server 3.4 Structural Characteristics Antenna type: glue stick type external antenna Material: PC plastic (shell) Main body protection level: IP65 Size: 50mm 50mm 30mm 3.5 Working Environment Ambient temperature -30C~70C, humidity 0~95% (non-condensing) 4 The Core Advantages of the Product Simple installation and rapid deployment, helping IoT projects to land quickly Small size Rainproof, suitable for outdoor environments Comes with fill light, suitable for taking photos at night Remote configuration of parameters 5 WiFi Camera Configuration 6.1 Connect to Computer Power on the camera and connect it to the computer with a network cable. Check the IP address on the camera label, the default is 192.168.1.88 (the actual value on the camera label shall prevail). Set the computer IP to the same network segment as the camera, enter the camera IP in the browser, and enter the login interface By default, the username and password are admin (actually subject to the camera label). 7 Timed Photo Upload Settings Capture photos can be stored to SD card or uploaded to FTP server at any time and interval.
Product overview: With the rapid development of China's economy, it has been the trend to change the sizing process of traditional box board paper and corrugated board from the combination method of traditional internal sizing and surface sizing into complete surface sizing. Our company has developed new AKD modified surface sizing agent SA2600 through concentrated development for many years. The product is aggregated by various cation materials through special process and added the cross-linking resin synergist. The product can greatly boost the sizing effect, reduce the AKD hydrolysis and improve paper moisture regaining. The product not only can provide excellent high water-resistance performance, but also can boost the surface strength of paper. The product is used in the box board paper and high-strength corrugated paper produced from waste carton. Technical specifications Appearance: Milky white liquid Solids content: 25 �±1% pH value: 2-4 Viscosity: â?¤ 50 mPa.s (25 oC) Ionic type: Cation Solubility: Soluble in water. Performance characteristics 1. It owns excellent water resistance performance and thermal water resistance performance. 2. It can shorten the curing time, and isn't easy to regain moisture. 3. The consumption of internal sizing agent is reduced to decrease production cost. 4. It can significantly improve the interface strength of paper. 5. Compared with the Cation styrene acrylic surface sizing agent, the product reduces its dependence on aluminum sulfate. The less or no aluminum sulfate can be used to improve the paper folding resistance. 6. The product is good in mechanical stability, and few bubbles are generated in the operation process. 7. The product can be used separately or matches with styrene acrylic surface sizing agent. Usage tips Consumption: In case of separate use, 2-6 kg/ton paper is used. In case of matching with styrene acrylic surface sizing agent, the 1-3 kg/ton paper is used. The specific consumption needs to be adjusted according to the water absorption indicator requirements. During use, the pasted starch glue solution is cooled to below 65�°C, and the stock solution of the product is added to the starch glue solution tank, and is mixed evenly before sizing; Or the metering pump is used to add starch glue solution to pipeline for continuous adding. Starch glue solution can be added aluminum sulfate or not according to the actual conditions. The PH value of glue solution in glue solution tank is controlled at 3.5-4.5 upon the use of aluminum sulfate. In case of matching with styrene acrylic surface sizing agent, the aluminum sulfate of glue solution in sizing tank is controlled at 3.5-4. Packing and storage It is packaged in 200kg and 1000kg plastic bucket and is stored in cool place (5-30C) to avoid freezing and solarization. Storage life: 3 months
