*Aluminium Handle bar with Nylon Grab *Quick-Flip Nylon Latchs *Silicon seal *Stainess steel hings *Corner SS#304 bottle openers *With Leak-Proof Drain Plug External dimension:44*39*46CM (17.32*15.35*18.1 1") Internal dimension (cm):31.2*30.7*36.6C M (12.28*12.09*14. 41") Carton size (cm):45.5*40.5*49C M(0.09CBM/CT N) Gross/Net Weight:9.5KGS/8KG S (20.95/17.64 LBS) Cold retention:â?¥5days at 77â??(25�°C) with ice fully filled Container Load Quantity:310PCS/20GP;64 5PCS/40GP;755P CS/40'HQ; Main Material:lldpe wall+pu formed insulation Volume:33Quart/31Liters Packing:1 opp bag +1 piece /carton
*Quick-Flip Nylon Latchs *Silicon seal and feet *Removable carry handles *Stainess steel hings *Corner SS#304 bottle openers *With Leak-Proof Drain Plug *2 kinds lid designs for choice *EVA pad on top of lid for choice. External dimension:55.1*41*47CM (21.7*16.14*18.5") Internal dimension (cm):42.1*28.9*36.5C M (16.57*11.38*14. 37") Carton size (cm):56.5*42.5*49C M(0.117CBM/C TN) Gross/Net Weight:11.5KGS/10 KGS (25.35/22.05 LBS) Cold retention:â?¥5days at 77â??(25�°C) with ice fully filled Container Load Quantity:240PCS/20GP;50 0PCS/40GP; 585PCS/40'HQ; Main Material:lldpe wall+pu formed insulation Volume:45Quart/42Liters Packing:1 opp bag +1 piece /carton
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter �?31-�?32 Chamfering Size 1�?45�°, 2.5�?45�° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
Double Side Rail Hole Chamfering Kit The double chamfer is used for chamfering the holes on the waist of railway rail. The structure of the bilateral chamfering device: It has a door frame, the left and right holder through a set of four bar linkage hinge, and equipped with upper locking lever handle, install left axle shaft sleeve of the bottom of the left bracket, left axis right side is equipped with disc blade, left left end shaft with a ratchet wrench, right shaft are installed in the shaft sleeve from the lower pole of the right holder, the right shaft suits a compression spring, right left end shaft is equipped with the disc blade, The right end of the right axle is fitted with a ratchet wrench. The double-sided chamfering device has the advantages of simple structure, convenient operation and high working efficiency. The blade is disk-shaped, the blade on the whole circumference is sharp and wear-resistant, and the service life is long. Specification Model LJ-DJQ-S Type Rail Chamfering Tool Material Stainless Steel Dimensions (L x W x H) 40*15 cm Chamfer Diameter 31-?32 Chamfering Size 145°, 2.5 45° Application 43kg/m,50kg/m,60kg/m rail Weight 2.8KG
Product Info for Nikon 25x120 Telescopic Binoculars with Fork Mount From watching boats from a balcony to gazing at the lunar surface, the Nikon 25x120 Telescopic Binoculars combine the viewing comfort of the latter with the power of the former to give you an optic that represents the best of both worlds. With a size and weight that prevents practical use by hand, Nikon includes their fork mount that allows you to easily handle the optic and mount them on a railing, a custom rig, or their optional pillar stand for permanent installation on a patio, balcony, porch, or backyard observatory. Performance Magnification: 25x Objective Lens Diameter: 120 mm Angle of View: 3�° (Actual) Field of View: 150.6' @ 1000 yd / 50 m @ 1000 m Minimum Focus Distance: 436.4' / 133 m Exit Pupil Diameter: 4.8 mm Eye Relief: 18.9 mm Interpupillary Adjustment: 58 to 74 mm / 2.3 to 2.9" Diopter Adjustment: -5 to +3 Focus Type: Individual Features Fogproof: Yes, Nitrogen Filled Water Resistance: Waterproof, IPX8 General Dimensions: 26.38 x 17.87 x 6.3" / 67 x 45.4 x 16 cm (Binocular Only) Weight: 30.86 lb / 14 kg Packaging Info Package Weight: 63 lb Box Dimensions (LxWxH): 33.5 x 22.25 x 20.25"
Model 4L126TIL Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 545(401)/2,200 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 11.4 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 114 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536
Model 4L126TIM Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 495(364)/2,100 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.9 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 102 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536
Model 4L126TIH Engine type 4 cycle, In line, direct- injection, water cooled with turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 450(331)/2,000 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.3 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 88 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 7.0 Alternator capacity ( V- A ) 24 - 80 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 42 / 39 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by V- belt Marine gear Model DMT240H (1.50 / 1.97 / 2.44 / 2.93 / 3.40), DMT260HL (3.53 / 4.08 / 4.52 / 5.04), DMTP6500 (5.11 / 5.62 / 5.91 / 6.57 / 6.95) Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) Marine Gear(DMT240H) without M/G mm 1,311 x 904 x 1153 with M. gear mm 2,031 x 904 x 1153 Engine dry weight without M/G kg 1,136 with M. gear kg 1,536
Model L126TIM Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 400(294)/2,100 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.85 Compression ratio 17 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 77 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.0 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 24 / 19 Fresh water pump type Centrifugal type, driven by gear Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT144H (Dong-I ) Gear ratio 1.83 2.09 2.51 3.08 3.43 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,414 x 933 x 1,077 with M. gear mm 1,683 x 933 x 1,159 Engine dry weight without M/G kg 1,060 with M. gear kg 1,345
Model L126TIH Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 360(265)/2,000 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.33 Compression ratio 17 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 67 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.0 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 24 / 19 Fresh water pump type Centrifugal type, driven by gear Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT144H (Dong-I ) Gear ratio 1.83 2.09 2.51 3.08 3.43 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,414 x 933 x 1,077 with M. gear mm 1,683 x 933 x 1,159 Engine dry weight without M/G kg 1,060 with M. gear kg 1,345
Model MD196TI Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 320(235)/2,000 Displacement( cc ) 11,051 Cylinder number - bore x stroke( mm ) 6 - 123x 155 Mean piston speed (m/sec. ) 10.33 Compression ratio 16.5 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 61 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 6.0 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 150 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 24 / 19 Fresh water pump type Centrifugal type, driven by gear Sea water pump type Rubber impeller type driven by gear Marine gear Model TK450 (TaePyongYang) Gear ratio 1.97 2.53 3.04 3.42 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,397 x 933 x 1,077 with M. gear mm 1,695 x 933 x 1,155 Engine dry weight without M/G kg 1,009 with M. gear kg 1,329
Model L086TIM Engine type 4 cycle, In line, direct- injection, water cooled with wet turbo charger & inter-cooler Rating output (B.H.P) PS(kW)/rpm 315(232)/2300 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111x 139 Mean piston speed (m/sec. ) 10.66 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 62 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 27 / 25 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT110A (Dong-I) Gear ratio 1.77 2.09 2.42 2.82 3.19 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,364 x 919 x 965 with M. gear mm 1,552 x 919 x 1,062 Engine dry weight without M/G kg 790 with M. gear kg 1,015
Model L136T Engine type 4 cycle, In line, direct- injection, water cooled, with turbo charger Rating output (B.H.P) PS(kW)/rpm 200(147)/2200 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111x 139 Mean piston speed (m/sec. ) 10.19 Compression ratio 16.7 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 37 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 27 / 25 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT90A (Dong-I) Gear ratio 1.61 2.06 2.45 2.82 3.12 3.46 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,351 x 893 x 937 with M. gear mm 1,351 x 893 x 937 Engine dry weight without M/G kg 748 with M. gear kg 938
Model L136 Engine type 4 cycle, In line, direct- injection, water cooled, aspirated naturally Rating output (B.H.P) PS(kW)/rpm 160(118)/2200 Displacement( cc ) 8,071 Cylinder number - bore x stroke( mm ) 6 - 111 x 139 Mean piston speed (m/sec. ) 10.19 Compression ratio 17.6 : 1 Firing order 1 â?? 5 â?? 3 â?? 6 â?? 2 â?? 4 Governor type of injection pump Mechanical all speed (R.S.V) Fuel consumption lit / h 32 Starting system Electric Starting by starter motor Starter motor capacity (V- kW ) 24 - 4.5 Alternator capacity ( V- A ) 24 - 50 Battery (V- Ah) 24 - 100 Cooling system Indirect sea water cooling with heat exchanger Cooling water capacity Max. / Min. lit 25 / 23 Fresh water pump type Centrifugal type, driven by V- belt Sea water pump type Rubber impeller type driven by gear Marine gear Model DMT90AF (Dong-I) Gear ratio 1.61 2.06 2.45 2.82 3.12 3.46 Direction of revolution crankshaft Counter clockwise viewed from stern side propeller Clockwise viewed from stern side Engine size (L x W x H) without M/G mm 1,266 x 875 x 937 with M. gear mm 1,542 x 875 x 963 Engine dry weight without M/G kg 743 with M. gear kg 928
Best Granite Supplier and Manufacturer Granite is undoubtedly the premier choice of builders and designers across nations. It is used extensively because of its beauty and durability wherein India stands for more than 120 available granite colors. Paradise Exports is a leading granite supplier with a range of quality granite collections that stays alive over the years. We are one of the best suppliers of granite in India, and pride ourselves for providing outstanding Calibrated Granite Tiles, Granite XL Tiles, and other natural stones. Cutter Size available from Length- 7ft to 10ft and Height-2.5 to 3ft Jumbo Size available from Length- 7ft to 10ft and Height-6 to 9 ft Thickness 16 mm, 18 mm, 20 mm, 25 mm, 30 mm 40 mm Available Applications Leather, Flamed, Brushed, Polished, Honed, Lapatura Counter/Vanity Top, Flooring, Cladding, Marble Handicrafts, Swimming Pool Areas, Bathroom Walls & Floors, Fireplace Walls, External & Internal Aids In Construction
Type: Endless Conveyor Roller Sleeve Color: Brown Density: 430g/m ² Material: PBO and Kevlar Thickness: 5mm-14mm Temperature: 600 Technique: Needle Punch Application: Aluminium Industry(before fly cut) Load Capacity: Below 2000T UST Extrude Aluminum Profiles Inside Diameter: 41, 42, 44, 45 49, 50, 51 60, 61, 62, 63 76, 77 80, 81, 82 90, 95 100, 101, 102 114, 115 120, 127 Length: all sizes are available. We can customize different sizes according to your requirements.
Off-road forklift is an engineering vehicle that can carry out loading, unloading, stacking and handling operations on slopes and uneven grounds. It is mainly used for urban construction sites, dock yards, construction mines, economic development, stone yards. , small and medium-sized civil engineering, mountain forest areas and other field projects, such as poor distribution of material conditions in the distribution of goods, it has good mobility, cross-country reliability. model 3.0t front hinge Maximum payload kg 3500 Fork m 1.22 Customizable length Lifting Height m 3 3-6 Customizable Gear position automatic Dual high and low speed with running gear Transmission case kinlit 280 Integrated torque converter Engine kw yunnei490/36.8 Optional Entire length mm 4100/3850 Full width mm 1810 Full height mm 2450/2180 Total weight kg 4280 wheelbase mm 2350 minimum turning radius mm 4500 outside Tire size(front) 20.5/70-16wire Tire size(rear) 20.5/70-16wire Axle Weighted cast steel small wheel reduction axle Brake braking Air brake Four wheel disc brake Maximum working speed km/h 34 Maximum gradeability 35
# Product material:carbon steel,stainless steel,aluminum,Glass Fiber Reinforced Plastic #Product surface:Polished,Aluminum Oxidation Spray coated Hot dipped galvanized Galvanize Plain Steel,zinc aluminum magnesium # Product size:1-5/8"x 1" , 1-5/8"x 13/16", 1-5/8"x 1-5/8", 1-5/8"x 2-7/16", 1-5/8"x 3-1/4"(41 x 25 mm, 41 x 21 mm, 41 x 41 mm, 41 x 62 mm, 41 x 82 mm) # Product thickness: 18 GA 17 GA 16 GA 15 GA 14 GA 13 GA 12 GA (1.0 mm,1.2 mm,1.5 mm 1.8 mm 2.0 mm ,2.5 mm) , Others also welcome # Product Length:6' 10' 20' ,1.8 m 2.4 m 2.9 m,3.0 m,5.8 m,6.0 m ,Cut to Length upon request. # Application:Cable management support,Pipe and conduit supports,HVAC Duct Support,Pillar racking system,ceiling grid support bracket,Machine support protection,Solar panel bracket. We can offer # Full line of solid strut channel, slotted strut channel,welded strut channel, hole and patterns are available # Full line of fittings, clamps and strut supports # Wide variety of strut materials and finishes Hot questions Q1: Are you manufacture? A: No,we have partner in Wuxi Langfang city. Q2: How can I request product samples? A: The samples are free but courier charge will be collected. Please send us samples list and courier account number. Q3: How can I request a product catalog? A: The hard copies of catalogs are free but courier charge will be collected.The PDF catalog we can send to you by email or chap App. Q4: What is your payment terms? A: 30% T/T deposit,balance against B/L copy; Irrevocable L/C 100% at sight and irrevocable. Q5: How about the delivery time? A: Accord to your order list and quantity,mostly delivery in 30 days. Q6. Why choose us? 1. We are Songyin Leading supply of Strut Channel and Fittings. 2. Inspected by the Inspection Institution by standard of DIN-ISO-2768 3. 100% QC inspection before Shipment.
Anti-burst Yoga Ball, Peanut Fitness Yoga Ball, Balance Training Peanut Yoga Ball Supplier Peanut Yoga Ball System Parameters: Product Name Customized Wholesale Anti-burst Peanut Fitness Yoga Ball for Balance Training Material: PVC Color: White/silver/green/red/yellow/blue/purple/black or Custom Color Size: 45*90/50*100 or Custom Size Logo: Custom Logo MOQ: 100pcs Delivery time: (1)7-10 working days-for existing products (2)10-15 working days-if need customized logo OEM Service: Yes Certification Available: Yes Packing details: Poly Bag+Carton Production Capacity: 80000 Piece/Pieces per Month Payment Term: L/C,T/T,D/P,PAYPAL,Trade assurance Peanut Yoga Ball Description: Customized Wholesale Anti-burst Peanut Fitness Yoga Ball for Balance is made of thick eco PVC material, Latex free and Phthalates free. SGS tested. Anti-burst rubber compound prevents the ball from violently bursting if punctured. To inflate the peanut ball to its full size, pump the ball with included hand pump. Add more air after 12 hours until it is fully expanded. 1. The ball surface is slip resistant, feel great when your skin on it. 2. Ideal for weight lifting exercise, therapy, labor birthing and dog training. 3. Easy to integrate into almost any training regimen. Great for use at the gym, in yoga, or in your living room. 4. Stretch and strengthen the spine while increasing the range of motion. It's safe and suitable for all age including children and seniors. The unique shape of this ball provides children and seniors with added stability for balance, exercise and vestibular therapy. 5. Ball only rolls forward and backward. Provides lateral stability and is more stable than traditional round balls.
Product Description MOTOR SyncDrive Pro, 85Nm, powered by Yamaha CONTROLLER RideControl Ergo 3, grip integrated DISPLAY RideControl GO, frame integrated LED displayANT+ Wireless display compatible BATTERY EnergyPak Smart 625, EnergyPak Plus, 250Wh range extender compatible FRAME Advanced-grade composite frame, Advanced-grade rear triangle, Advanced forged composite upper rocker, 140mm Maestro suspension system FORK Fox 36 Factory Live Valve, 150mm travel, 44mm offset, Boost 110x15QR, electronic adaptive suspension, e-bike integrated SHOCK Fox Float X Factory Live Valve, 185x52.5mm Trunnion mount, electronic suspension, e-bike integrated HANDLEBAR Giant Contact SLR 35 Carbon, 35x780mm GRIPS Giant Tactal Pro-E, single lock-on STEM Giant Contact SL 35 SEATPOST Giant Contact Switch, dropper, 30,9mm (S:125, M:150, L/XL:170) SADDLE Giant Romero SL, Neutral PEDALS Flat pedal SHIFTERS Shimano Deore XT FRONT DERAILLEUR MRP HD2 co-moulded chain guide REAR DERAILLEUR Shimano Deore XT, 12-speed, Shadow+ BRAKES Shimano Deore XT, BR-M8120, 4-piston, hydraulic disc, 203mm BRAKE LEVERS Shimano Deore XT, BL-M8120 CASSETTE Shimano HG-M71000, 10-51T, 12-speed CHAIN KMC e.12 Turbo, EcoProteq, e-bike optimized CRANKSET Praxis Performance Carbon e-crank armsPraxis Wavetm 36T Cold Forged 4130 premium steel chain ring BOTTOM BRACKET - RIMS Giant e-TRX 29", Tubeless ready, 30mm inner width HUBS Giant e-TRX [F] 110x15 [R] 148x12mm Thru-axle SPOKES Giant e-TRX TIRES Maxxis Assegai 29x2.6" foldable, Tubeless, EXO, 3c MaxxTerra[F]Maxxis Dissector 29x2.6" Foldable, Tubeless, EXO+, 120tpi 3C [R] EXTRAS Tubeless kit (liquid, valves, levers, manual, tool)Inner tube supplied LIGHTING Optional:- Giant Recon series e-bike lights available and direct connectable
