* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size �¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option
Twin screw and single screw barrel extruder.
ITEM SPECIFICATION MODEL WDE-5018 CAPACITY 250-350KG/H SCREW TYPE TWIN SCREW SCREW L/D 18:1 SCREW SPEED 0-700 R/MIN SCREW DIAMETER 50 MM MAIN MOTOR POWER 30 KW HEATING TYPE ELECTRICAL PIPES HEATING ZONE THREE COOLING TYPE WATER HEATING PIPES POWER 6.4 KW DRIVE MOTOR BRAND SIEMENS BRAND ELECTRICAL COMPONENTSBRAND Schneider FREQUENCY INVERTERBRAND Schneider ELECTRICAL POWER SPECIFICATION 380V 50 HZ, 3P.
As the segment structure design, the equipment can be configured with different l/d, barrel designs, screen changer, pelletizing system, and/or electric control, to best meet unique requirements of different process. Cause our better understanding of the different material, the screw con? guration is designed based on rich experience and software technology to accomplish the material conveying, plasticizing compounding, shear and dispersion and pressurization. Screw elements, accurately designed with cnc technology, are fully intermeshed, providing self-cleaning and easy interchangeability. Upgrading accuracy and quality of the standard and high torque gear box. The special new type barrel structure and screw elements been manufactured with our powerful design experience. Typical application Filler modification -caco3 -talc powder -barium sulfate -ceramic powder -wood/plant fiber -other inorganic fillers Reinforce modification -short glass fiber -long glass fiber -carbon fiber -other whiskers Masterbatch -carbon black masterbatch -color masterbatch -flame retardant masterbatch -degradable masterbatch -other function materbatch Compounding modification -thermoplastic/elastomer -polymer alloy Seaworthy packing
Hte series high torque twin screw compounding extruder set The structure and basic principle is similar with te series. Hte series comprehensive increase the application and ability of products with original german high torque gear box, lubricating system and torque limiter, Screw elements and key part of extruder, accurately manufactured with cnc technology which guaranteed the process accuracy effectively. Reasonable space and personnel usage with hte series Typical application Reinforce modification -short glass fiber -long glass fiber -carbon fiber -other whiskers Compounding modification -thermoplastic/elastomer -polymer alloy Seaworthy packing
Specifications: Plastic granulating line 1.Buiding block principle for a large variety of applications.Processing tasks can be optimally accomplished with only a few barrel and screw variations. 2.New design gearbox with high torque and high speed up to 600rpm. Receive the high output. 3.Iso9001 certificates kaiyou 4.Maching centers assures productsí» high quality. 5.Kaiyou manufactures and assembles a wide variety of auxillary devices. 6.Advanced plc control system. 7.A variey fo palletizing paterns can be choosed according to requirements. 8.High quality and competitive price Suitable for: 1.Polymer blending & filling modification 2.Engineering polymer & glass fiber reinforcement 3.Masterbatch, fuctional parent granule, special material, powder coating material and cable material reactive extrusion, degassing & devolatilization Model: hky-35 Screw diameter: 35.6mm Groove depth: 6mm L/d: 32~56 Main motor power: 18.5kw Screw speed: 600rmp Capability: 5-80kg/h Model: hky-50 Screw diameter: 50.5mm Groove depth: 9mm L/d: 32~56 Main motor power: 55kw Screw speed: 600rmp Capability: 100-300kg/h Model: hky-65 Screw diameter: 62.4mm Groove depth: 11mm L/d: 32~56 Main motor power: 90kw Screw speed: 600rmp 0
R type helical gearbox is developed and produced according to our countryâ??s standards as well as bring into overseas' advanced design. Gears and gear shafts made of high-quality low-carbon alloy steel 20CrMnTi, output shaft made of high-quality low-carbon alloy steel 40Cr, the gearbox housing made of high-strength casting iron HT250, may also adopt material as requested. Integral casting housing with good rigidity to enhance the shaft strength and serves life of bearing.Structures: three-stage or two-stage foot-mounted helical gear reducer;Modularization design: parts of gearbox owns high exchangeability, coupling between gearbox and motor is standardized (usually IEC standard);Transmission ratio: fine division, wide scope, and may combine different series to get larger ratio;
R type helical gearbox is developed and produced according to our countryâ??s standards as well as bring into overseas' advanced design. Gears and gear shafts made of high-quality low-carbon alloy steel 20CrMnTi,, output shaft made of high-quality low-carbon alloy steel 40Cr, the gearbox housing made of high-strength casting iron HT250, may also adopt material as requested. Integral casting housing with good rigidity to enhance the shaft strength and serves life of bearing.Structures: three-stage or two-stage foot-mounted helical gear reducer;Modularization design: parts of gearbox owns high exchangeability, coupling between gearbox and motor is standardized (usually IEC standard);Transmission ratio: fine division, wide scope, and may combine different series to get larger ratio;
R type helical gearbox is developed and produced according to our countryâ??s standards as well as bring into overseas' advanced design. Gears and gear shafts made of high-quality low-carbon alloy steel 20CrMnTi,, output shaft made of high-quality low-carbon alloy steel 40Cr, the gearbox housing made of high-strength casting iron HT250, may also adopt material as requested. Integral casting housing with good rigidity to enhance the shaft strength and serves life of bearing.Structures: three-stage or two-stage foot-mounted helical gear reducer;Modularization design: parts of gearbox owns high exchangeability, coupling between gearbox and motor is standardized (usually IEC standard);Transmission ratio: fine division, wide scope, and may combine different series to get larger ratio;
High-Speed PE Coating Machine This production line adopts polyethylene (PE) material extrusion machine for film coating. The PE material is absorbed to material canister by automatic drying and material absorbing device. Then the material would be melted, after filter, the melted PE is distributed evenly onto the T shape mould. And finally it can be coated onto base material evenly. Features: This is the advance model of PE coating machine. It has multi-extrusion mould, multi- working station, The coating and compouding can be done by one step. Our machine are using Siemens PLC for easy setting and operation, all parameter can be set by the touch screen.
Zlyj series gearboxes for plastic single screw extruder, psy series gearboxes for counterrotating parallel twin screw extruder, sz series gearboxes for conical twin screw extruder.
GVA series marine gearbos is for twin input-single output propulsion unit. The range of Max. Propeller thrusts: Normal (kgf). From 55000kgf to 200000kgf.
Housing with tendon are made of cast iron to get high strenth and fine heat loss. Gears is made of forge steel, finished with gas carburising process and precise grounting to get high precise, high efficiency Carburized gears are durable and highly accurate. Flange-mounted with hollow shaft, foot-mounted with hollow shaft, and can be added torque arm and other special accessories. Large strength, long-term usage Large output torque, smooth startup, high efficiency. Input power 0.12-200kw Ratio 3.77-22323 Output torque up to 18000n.M. Wood, carton.
Hk series heavy duty helical gearboxes 1. Moq: 1 set 2. Packing method: polywood 3. Delivery lead time: 20-25 days 4. Payment terms: fob, cif, ddp 5. Payment method: t/t, 30% in advance, 70% before delivery 6. Shipping port: shanghai Material: Housing: ht250 cast iron Gear: 20crmnti h, high grade allo with carburization, surface hardness: 58-62hrc, center hardness: 33-48hrc Grinding precision grade: iso1328-1: 1995 class 5-6, surfaceness: 0.8, carburization depth: 0.6-1.5mm Bearing: 42crmo Warranty: 18 months Applications: The products are widely applied in electricity, coal, cement, metallurgy, harbor, agriculture, shipping, lifting, environment protection, stage, logistic, weaving, paper making, light industry, plastics and other regions. Fumigation case, weight and dimensions depend on gearbox size
1. Moq: 1 set 2. Packing method: polywood 3. Delivery lead time: 20-25 days 4. Payment terms: fob, cif, ddp 5. Payment method: t/t, 30% in advance, 70% before delivery 6. Shipping port: shanghai Material: Housing: ht250 cast iron Gear: 20crmnti h, high grade allo with carburization, surface hardness: 58-62hrc, center hardness: 33-48hrc Grinding precision grade: iso1328-1: 1995 class 5-6, surfaceness: 0.8, carburization depth: 0.6-1.5mm Bearing: 42crmo Warranty: 18 months Applications: The products are widely applied in electricity, coal, cement, metallurgy, harbor, agriculture, shipping, lifting, environment protection, stage, logistic, weaving, paper making, light industry, plastics and other regions. Price terms©u exw, fob, cif, ddp Payment terms©u t/t, l/c, western union Packing©u fumigation case Lead time©u 30 days Standards certificate©u iso9001, iso14001, iso18001, ccc, ce, sgs Fumigation case
