25-80hp 4 wheeled tractors. The tractor with large power output, easy start, advanced economic index, reliable performance, low noise and good environmental protection technical index. Hydraulic steering system is equipped for quick and convenient operations. Impact transmission system, large speed range and reasonable shifts can meet different tasks such as field operations, fixed operations and transportation. It can be equipped with front loader and back hoe so it can meet the requirement of small constructions. Model: EL254C-2 Driven Type: 44WD Engine: 2100T, Two-Cylinder, Water-cooled, 4-stroke diesel engine General dimensions (mm): 236012001100 Wheel base (mm): 1570 Wheel tread Front wheel (mm): 1000 Back wheel (mm): 960 Dry mass (kg): 1166 Tyres Front wheel: 400-12 Back wheel: 750-16 Clutch: Dry friction, Single-Stage Type of steering: Hytrandic Steering Bear box with differential lock: (4+1)2 Compound Rated traction (KN): 7.2 Rate Power(KW): 18.4 Rate rotate speed(RPM): 2300 Rate torsional power(N.m): 84 PTO power (KW): Post-unindependence 540/1000rpm Startup: Electric Starter Container Quantity: 20units/40'
ZQ-26 Pneumatic Mucker Rocker Shovel Keywords: Pneumatic Mucker Rocker Shovel, Pneumatic Rock Shovel, Rocker Shovel, Mucker Machine, Rocker Shovel Loader, Electric Rock Loader Description of ZQ-26 Pneumatic Mucker Rocker Shovel ZQ-26 Pneumatic Mucker Rocker Shovel Is a compressed air powered rock shovel used for moving rocks, ore when driving headings or the explosive blows up the big rock or ore. It is a high output rock shovel with minimum maintenance costs; loading materials: gold, non-ferrous metal, black metal, nonmetal, and rock, ore, etc. It can be used in a explosion proof fields. The max diameter of the medium is 500mm. When the diameter is 250mm, the loading efficiency is best. It runs on the railway track, so the wheel gauge is 600mm in normal, when the gauge is 762mm, 900mm, or others, please tell in advance. Parameter of ZQ-26 Pneumatic Mucker Rocker Shovel ModelZQ-26 Bucket volume0.26M3 Technique productivity52-60M3/h Loading width2500-2700mm Unload height1250mm Unload distance480mm Max. Air consumption11.5-19M3/min Working pressure5-6bar Gauge600mm Wheel diameter1000mm Length2375 Width1370 Height1375 Motor9+15kw Working speedabout 0.79m/s Promoting speed0.46-0.71m/s Weight2700kg
Jig Saw M1Q-MD-65 Cutting Capacity:65mm No_Load Speed:0-3100r/min Rated Input power:650W Rated Volatage:110/240V Rated Frequency:50/60Hz
Rated Voltage 220V~ Rated Power 350W Rated Frequency 50Hz Drilling Capacity Steel 10mm Wood 20mm No-load Speed 0-3000r/min Standard Packing
This machine not only has the capability of being a hand push marking machine but also has hydraulic pressure drive equipment by itself that enables increased speed of line construction, and results in reduced labor force for working in your projects. It is the best choice for large areas or mountainous regions of highway line marking construction and more advances than hand push marking machines. 1. Auto-moving the direction of forward or turn over, steeples speed regulating 2. Hydraulic pressure drive powerful, speed fast of construction and high efficiency of working. 3. Stable welded profile frame construction, light and agile 4. Safety warning light and night light. 5. Special materials of marking bucket, heat-resistance, anti-cauterization, hard melt alloy grounded knife, active design 6. Same-step sprinkle the bead, convenient construction, adjusted quantity of sprinkle for saving the beads. Engine: HONDA 5.5HP gasoline engine Volume: 1400X820X1040mm Weight: 200Kg (standard with 150mm bucket) Width of thermoplastic bucket: ordinary mode: 150/200/300mm Purchase mode: 100/400/450mm 120/240mm Capacity of coating tank: 100kg Capacity of bead tank: 10kg- Line thickness: 1.0-2.5mm Moving speed: 0-10km/h Max degree of climbing: 15degree Control direction: locked rear wheel, easily and precisely adjust alignment to your exact requirement Heating duel: liquefied petroleum gas (carry the per-gas tank of 10-15kg) Type of sprinkle: screed method
General info: 1.Category:wheel tractor 2.Driving wheel:two wheel drive or four wheel drive 3.Usage:farm tractor 4.Certification:CCC or ISO 9001 or EPA or CE 5.Brand:Frata 7.Power:from 20hp to 165hp 8.Engine:YTO,Perkins,Lovol technology 9.Warranty period:1 year when load at destination port 10.Minimum order quatity:1 Unit 11.Delivery time:within 25-30days after confirmation of the order 12.Payment method:T/T or L/C Specification: Items Unit Min Max Engine Model YTO engine with Perkins technology Rated power kw 23.5 121.3 hp 32 165 Rated speed r/min 2200 2400 Dimensions of Tractor Drive Type Two wheel drive or four wheel drive Rated Traction kn 8 35 Overall Dimensions L*W*H mm 2900*1400*2030 5350*3500*3110 Wheel base mm 1600 2760 Front Wheel tread mm 1100 1876 Rear Wheel tread 1130 1850 Min.Ground Clearence mm 355 450 Radius of Turining Circle m 4.6 4.9 Constructional weight kg 1210 7150 Forward speed km/h from 1.9 to 24.76 from 2.31 to 34.85 Back speed from 1.78 to 7.09 from 3.10 to 10.78 Transmission & Steering Clutch Single disc, dry-type, dual stage Gearbox 4 X (2+1) or 4 X(2+1) X2 with cheeper-gear Wheel Tyre front Wheel 6.00-16 14.9-26 rear Wheel 11.2-24 18.4-38 Steering gear Hydraulic power steering . Features: 1.large power output, low fuel consumption, large traction, advanced chassis and good load-bearing capacity. 2.The tractor is developed on the basis of the Italian wheeled tractor chassis technology, adopting the British technology-based engine. 3.The tractor has a desirable power economic efficiency. 4.It has multiple gears and a wide speed range. Besides, it is flexible in steering and easy to operate. 5.Dual stage clutch, hydraulic steering, combined meter, combined lamps, front & rear ballast, multi-way valve, fieberglass hood, shuttle shift, spring seat, roll bar, canopy, cabin with fan/heater/air conditioner! 6.front end loader,backhoe and other implements are available. Tractor Details: 1.Engine:YTO,Perkins,Lovol technology 2.Gearbox:F8+R4 gearbox or F16+R8 with creeper gear 3.Steering gear:Hydraulic power steering 4.Clutch:Single disc,dry-type,dual stage cluth 5.PTO:Dual speed PTO Packing method: 1.Non-Fumigation pallet 2.Iron crate or in bulk 3.as your request Customers all over the world: Iron crate or in bulk depends on tractor hp or as your request
Batch capacity:-to loader shaft is through a con clutch & chain the machine can be operated by diesel engine or electric motor Transmission: - to loader shaft is through a con clutch & chain the machine can be operated by diesel engine or electric motor Power requirement: - a: diesel 6.5 h.P 1500 r.P.M air or water cooled diesel engine B: electric 7.5 h.P. 3phase 1400 r.P.M drive electrical motor Handling: - 4 nos. Pneumatic tyre with roller bearing with excel shaft Mechanical hopper Model size:-king280ltr Drum speed:-24-27 rpm Production rate:-6 to 8 cu.Mt. Weight:-1480
Spare parts for construction equipments - parts for excavators,concrete pump,wheel loader, hydraulic breakers, etc. - parts for hydraulic pump(a8v,kvc,k3v,nv,hpr,hpv,nvk models) - parts for track motor(gm30h,gm35va,kmf90,gm24va etc) - parts for swing motors(m2x120, m2x210, mx150, sg140e,htm450,sg08e model) - seal kit for arm,boom and bucket of komastu,hitachi,kobelco etc - for furukawa, npk, rammer,toku, soosan,dnb,msb and etc. - parts for concrete pump of putzmeister, schwing models, - acceossories for drilling machine ( atlas,furukawa etc. - bits- rocks/stone - parts for japanese excavators, - under carrige, sprocket,idler, track shoes,track link, tooth and others.
HTC- 915 *Adopts JiangSu SiDa four cylinder engine; *Full hydraulic transmission technology,simple structure and reliable performance; *Separate flow of single pump for operation hydraulic system,significant effect of energy conservation; *Double sealing hydraulic pipeline joint with international standard of 24awl and Oring,solved leakage problem of oil; *Load sensing fully hydraulic steering system,easy and flexible operation; *Safe and reliable single pipeline brake syesem,disk type brake; *In the nature of operation system with automatic lay flat performace at height; *Hinge joint part of bucket adopts dust prevention sealing and lubricating stucture; *Unitary and luxury dashboard; *New Luxury cab. Main technical parameter Item Parameter Item Parameter Capacity 0.5 m3 outside of rear wheel (Min. turning radius) 3600mm Rated load 1000 kg Turning angle 35each direction Dumping height 2420 mm Min. ground clearance 230mm Dumping reach 900 mm Wheel bace 1820mm Bucket lifting time 4 S Wheel tread 1400mm Total cycle time 8 S Engine SD490G Max speed 16km/h Engine power 33kW/2400rpm Max. breakforce 36 kN Tyre size 8.25-16 Max. drawing force 22 kN Overall dimensions(length*wide*height) 4960*1620*2420mm Max. gradeability 28 Whole operating weight 2990kg.
china coal0001 Z Series Mining Mucker Machines Keywords: Z Series Mining Mucker Machines, Mucker Machine, Rocker Shovel, Rocker Shovel Loader, Electric Rock Loader Introduction of Z Series Mining Mucker Machines Z Series Mining Mucker Machines are designed as light, compact, flexible, easy operated and stable working equipment for underground mining, suitable for normal rocks, stones, grits, iron mine, gold mine, granite mine, and other metal or nonmetal mines. Maximum size of the loadable rocks can be 500mm diameter, and they gain highest efficiency by loading 100-400mm diameter rocks. Z Series Mining Mucker Machines are suitable for level tunnels (8degree maximum) for various underground mines. Z Series Mining Mucker Machines are designed aselectric or compressed air driven,single bucketed and automatic walking machines by loading at front and unloading at back. Parameter of Z Series Mining Mucker Machines TypeZ-17AWZ-20Z-20AWZ-30AWZQ-26 Loading Capacity (m3/h)20-3030-4030-4050-6040-50 Capacity(m3)0.170.20.20.30.26 Loading Width(M)1.72.02.02.22.7 Rail Gauge(mm)600mm (When the rail gauge is 750mm,762mm, pls mark in the order) PowerElectric motorElectric motorElectric motorElectric motorwind motor Travel Power(kw)10.510.510.51.510.5 Raising Hopper Power(kw)10.510.5131515 Discharge Height(mm)12501330136013701250 Dimension(mm)Length (bucket down) L21202480240026202375 Width (pedal down)10111210133013001380 Height (bucket working) H219202180218022602240 Height (bucket down) H112001518146015451455 Weight(kg)37603750370046002700
Rated output voltage 100~2250kv With insulation cylindar shell or matal tank Oil-immersed, natural cooling With base and wheels for movement in lab With electrode to prevent corona Depending to detailed voltage and capacity class
Rated Voltage(220V) Rated Frequency(50HZ) Rated Power Input(300W) No-Load Speed(0-2500r/min) Max.Drilling Capacity(10mm)(Steel) Max.Drilling Capacity(18mm)(Wood) Net Weight(1.1kg). Color carton.
1. Import Engine or Internal Options: Yanmar 3TNV82/ Laiyang LL380B, China 2. Swing Motor: Nachi , Japan 3. Travel Motor: Nachi , Japan 4. Pipeline System: Parker, America 5. Servo Control: JIC, Korea 6. Main Valve: JIC Korea íí Excavator Style íí DT16 Model Machine Weight KG 1600 NOM. Bucket Capacity Range M3 0.05-0.1 Width of Track Shoe MM 240 Function Pressure to the Ground KG/CM2 0.3 Swing Speed RPM 12-13.5 Walking Speed KM/H 0/4.5 Gradeability íí 35íp (58%) Maximum Digging Force of Bucket KN 14 Maximum Digging Force of Arm KN 10 Engine Engine Brand Options (Internal or Import) íí Yanmar 3TNV82 Model íí Vertical, Inline, Water-Cooled, 4 Cycle, Direct Injection Rated Power KW/RPM 16.3/2200 Piston Stroke Maximum Capacity MM 1.330L Hydraulic Assemblage Hydraulic Pump íí Triple Gear Pump Driven Motor íí Axial Plunger Tyre Motor 2 Swing Motor íí Axial Plunger Tyre Motor 1 Tank Capacity Tank Capacity L 18 Hydraulic Tank Capacity L 25 Dimensions Maximum Length of Transportation MM 3800 Machine Overall Transportation MM 2250 Length of Track Shoe on Parking MM 1350 Width of Crawler MM 1015 Min. Lift above Ground MM 240 Working Ranges Maximum Digging Radius MM 3530 Maximum Digging Depth MM 2060 Vertical Digging Depth MM 1580 Maximum Dumping Helght MM 3150 Maximum Dumping Height MM 2280 Others Dozing Plate Width x Height MM 1000 230 Dozing Plate Height/Depth MM 190 250
Main specifications: Bucket size 0.6 m3 Rated loading capacity 30 kn Bucket width 1520 mm Maximum discharging height 1400/1700 mm Maximum digging depth 600mm Maximum traction force 30kn Travelling speed 0.417km/h Grade ability Ground clearance min. 180 mm Average contact pressure 0.07mpa Hydraulic oil tank capacity: 300 Motor power 33kw Power supply 380/660 v Dimensions (l*w*h) 4150mm Machine weight: 4500kg Nude packing with 40hq container per set.
Material: Bucket:new pp+abs Pole: stainless steel Mop head: microfiber 150d/288f Specification: 1.Wash&dry mop 2.With drain design 3.With wheels 4.Bucket capacity 5.7l 5.With two mop heads Packing details: 4pcs/ctn Color box size:55*29*29cm Carton size:56*54*56.5cm Nw/gw:3.25kg/3.98kg
Available from 20 to 30 m3 per hour capacity. Rigid construction of main chassis fabricated from rolled mild steel material Pan type / twin shaft mixer for continuous and homogeneous mixing Replaceable liner tiles and tips in mixer Loading of aggregate, sand hopper by wheel loaders, conveyor or manually Fully automatic plant with electronic weighing of aggregate, sand, water, cement. Microprocessor based control panel with integral computerized batch controller to accommodate numerous mix recipes Maximum weighing accuracy. Plant requires electricity supply, water piping, aggregate and sand feeding inbuilt water and additive tank Easy transportation and shifting by towing also.
Mobile concrete batching mixing plant 4)mobile concrete batching/mixing plant: Offered in 12/15/18/20/35m3/hr. Capacity with pan type mixer. Mixer having electronic load cell type weighing system. Loading of aggregates / sand done by wheel loader / conveyor / manual. Inbuilt water and additive tank. Fully automatic-electronic operation with integrated plc/pc control and remote function. Plant can be erected & commissioned within two days. Plant can be transported in single 40 feet trailer.
Concrete batching mixing plant Mobile concrete batching/mixing plant: Offered in 12/15/18/20/35m3/hr. Capacity with pan type mixer. Mixer having electronic load cell type weighing system. Loading of aggregates / sand done by wheel loader / conveyor / manual. Inbuilt water and additive tank. Fully automatic-electronic operation with integrated plc/pc control and remote function. Plant can be erected & commissioned within two days. Plant can be transported in single 40 feet trailer.
Model: JY0.6 Walking type: crawler-type Bucket form: backacting shovel Application: universal Engine brand:Yanmar/Changchai Horsepower: 5kw Rated rotate speed: 3000r/min Total displacement:0.296L Air cylinder number: 1 Cylinder diameterxroute: 78*62mm Working weight: 550kg Bucket capacity: 0.028 m³ Walking speed: 3km/h Rotation speed:13rpm Ground pressure: 18kpa Grade ability: 70% Maximum excavating force: 8.6kn Length*width*height: 3200*950*1850 Track link width: 130mm Track link length: 1100mm
Model No. SWT508-MAX SWT508-MAX1 SWT508-MAX2 Power AC220/ 50HZ Motor Rated 500W Rated 800W Rated 1000W Display English/Chinese Cutting Length 1-60000mm 1-100000mm Stripping Length (mm) Wire Head 0-50 Wire Tail 0-50 Wire Head 0-100 Wire Tail 0-100 Wire Head 0-150 Wire Tail 0-150 Cutting Tolerance ± (0.002xL)mm ± (0.001xL)mm Middle Stripping 13sections 16 sections Cut core cross-section 0.2ï½?16mm2 0.3ï½?25mm2 0.3ï½?25mm2 1ï½?70mm2 Catheter Max. Diameter ï¿ 13 ï¿ 18 Appropriate Wire PVC Wire, Teflon Wire, Glass Wire, Multistrand steel wire Blade Material Hard Tungsten Steel Production (piece/hour) 16SQMM2000-3000 25SQMM 3000-4000 4000-5000 5000-6000 Drive Mode 4 wheels 8 wheels 8 wheels independent drive
