Meets new UL requirements issued in 2008. UL Standard 943 Class A(GFCI) and 498(Receptacle) 2-pole,3-wire grounding duplex receptacle Impact-resistant thermoplastic cover and body More resistance to electrical noise and to moisture corrosion Press interval (monthly)test button, then press reset button in order to confirm the GFCI works properly, if reset state fails, the working LED will turn off, GFCI life expired and need to be replaced by a new one. End-of ¨Clife indication LED will turn red immediately if GFCI has lost its ability to protect, then pressing the test button to use the function of Manual compulsory to trip, and it will not reset anymore that may prevent personal injury or death due to a ground fault. GFCI with Tamper Resistant, It may stop the kids use any foreign body to connect the receptacles any alive parts from the outlets. Reverse miswiring will not be reset and the green indicator led will be lighting Manual compulsory trip under some emergent cases when GFCI is in a fault working state, it is the most advanced Technology and safest fault current interrupter in the world so far, which make good of the defect of GFCI to trip only under the condition of power feed through. The most advanced protection device, having the special functions of mechanical compulsory trip and without any consume According to the customer's request
Socket Gas groupi, iia & iib ip65
GRIPHOLD® make, Heavy Duty, Double Hex Socket, in 3/4 Sq. Drive, made from chrome vanadium steel (EN-47) with rust resistant black industrial finish. GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications. They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications. They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out. The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis. The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards. Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers. The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Single Hex Impact Socket, in 3/4 sq. drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish. GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications. They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications. They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out. The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis. The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards. Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers. The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Single Hex Impact Socket, in 1.1/2 sq. drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish. GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications. They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications. They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out. The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis. The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards. Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers. The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Single Hex Impact Socket , in 1/2 sq. drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish. GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications. They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications. They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out. The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis. The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards. Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice among general purpose tools manufacturers. The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
GRIPHOLD® make, Heavy Duty, Single Hex Impact Socket, in 2.1/2 sq. drive made from chrome vanadium steel (EN-47) with rust resistant black industrial finish. GRIPHOLD® industrial tools are made from the heavy duty and higher torque applications. They are made from high-grade materials, which have a high Torque bearing capacity as well as the impact applications. They undergo a special Heat Treatment process and the stress is relieved of all components before Hardening is carried out. The process of hardness is carried out in accordance with the IS Standards for every tools and testing is done on 100% basis. The tempering process is given special attention. Design and Hardness are strictly followed as per IS-Standards for Industrial Tools. Torque/Load tests are carried out to confirm the quality of every batch as per IS-Standards. Griphold Industrial Tools have industrial black finish due to application of phosphate process for rust resistance and non-pealing of surface coating, instead of chrome plating, which is the general practice amopng general purpose tools manufacturers. The wear resistance of Griphold Industrial Tools is almost the double of the general-purpose tools which is due to special manufacturing process.
Quick Details Place of Origin: Zhejiang, China (Mainland) Brand Name: Hanlight Model Number: FC4610 Type: Wall Socket Grounding: Standard Grounding Rated Voltage: 220V-250V Rated Current: 13A Application: Residential / General-Purpose Mechanical Life: 15 years Standard: BS Standard Color: White Popular Market: West Europe Main Market: West Europe, Middle East, Africa Certification: CE, IEC, CB Other Application: Office/Hospital/School/Hotel HS Code: 85366900 Package Type: Customize Allowed Packaging size: 48.5*19.5*35cm Packaging & Delivery Packaging Details: Product: 86*86mm Inner Box: 18.5*16.5*9.3cm Export Carton: 48.5*19.5*35cm Delivery Detail: ship in 30 days after payment Product Description Panel Material: Urea Back Plate Material: PA Insert Color: Gray Color: White Rocker: Urea Current: 13A Package: 1Pcs/Polybag,10Pcs/Inner Box,100Pcs/Export Carton Payment Term: T/T,L/C MOQ: 400pcs
1 Meet IEC 62196-2 2010 SHEET 2-llb (Mennekes, Type 2) EU European standard 2 Nice shape and easy to use, protection class IP54(in mated conditions) Product Feature Materials 1 Shell Material: Thermo Plastic ( Insulator inflammability UL94 VO) 2 Contact Pin: Copper alloy, silver or nickel plating 3 Sealing gasket: rubber or silicon rubber Product Specification/Models Parameters Model: BS-EVSC003 4 Point Fixing Reted current: 16A/32A Working voltage: 240V AC Insulation resistance: > 1000M ohm Terminal temperature rise:
FRONT PANEL INTERFACE UNIT SOCKET 3 PIN 6A 250VAC
Place of Origin:Zhejiang, China (Mainland) Brand Name:HAPU or OEM Model Number:AL-06 Weekly Digital timer Max. Current:16A Max. Voltage:230VAC Display:Digital LCD Color:White
Specifications: Rated current: 20a Rated voltage: 125v Nema: 5-15r Trip level: 5ma plus or minus 1ma Flammability: rated v-2 per ul94 Body material: polycarbonate Operating temperature: -35c to +66c Certificate: etl/cetl Warranty: 2-year limited General features: A, bridge contact provides individual sets of contacts for gfci receptacle face and downstream receptacles. No power will be delivered to receptacle face if improperly wired (line-load reversed) B, trip threshold meets ul requirements for tripping time (0.025s ) C, less nuisance tripping to high frequency noise D, provides superior resistance to electrical surges and over-voltages E, lockout action prevents reset if gfci is damaged or don`t have respond to a ground fault F, status indicator light provides simple, intuitive feedback on power, voltage and protection status as well as end of life G, silver alloy contacts G, self-test every 140 mins to ensure continous safety H, impact-resistant thermoplastic cover and body I, one-piece t-design trip latch mechanism provides efficient operation J, available in 15a and 20a versions, all with fed-through K, test and reset button colors match device face L, compatible with all the wallbox and provide matched wallplates M, independent r &d, patent protection N, two-year warranty
The socket complies a high-quality insulating thermoplastic coating that provides IP65 protection against dust and water ingress from all sides and has a water drainage hole. The socket is ready for 4-point fixing and the screw.JT Mobility type 2 inlet socket (male), 32A, 480V, 3-phase. is intended for installation in the vehicle side for a maximum of 32A. Only to be used in combination with an EVSE (Electric Vehicle Supply Unit) controller
Schneider RCBO 6-32A Type C60H 10kA 10pcs x 1 box
The socket complies a high-quality insulating thermoplastic coating that provides IP55 protection against dust and water ingress from all sides and has a water drainage hole. The socket is ready for 4-point fixing and the screw and 0.5 Meter cable at another end.JT Mobility Type 2 inlet socket (male), 32A, 250V, three phase is intended for installation in the vehicle side for a maximum of 32A.
Wifi&Blutooth Mini Smart Plug TUYA Solution 1.AC Rated: AC230V 50Hz 2.Rated output: AC230V 16A MAX, 3680W 3.WiFi Standards: 2.4G 4. Function at APP: ON/OFF, Timer, Count Down, Power Meter Amazon Echo, Google home 5.Dimension:54*54*39mm 6.Certification: CE-LVD, CE-RED,RoHS 7.� Support System:Andrio/IOS
Norminal voltage:220-240V Norminal current:16A No.poles:2P+E Protection degree:IP 44 Confirm to: IEC 60309. 10Pcs/Box£¬ 100Pcs/CTN, 15KGS/CTN.
Capstan lifting anchor, lifting anchor two head type, eye anchor, utility anchor, edge lift anchor, fitting, lifting socket, cast-in lifting insert, anchor bolt
Insulator:pa Body:brass Spring: beryllium copper Catii600v / max.32a. 250pcs/pkg.
Mini-XLR 3-pin female connector for microphone cables for professional drum and radio mics. Ideal for live sound PA stage and studio recording applications. Details 1.Weight : 0.04 Kg 2.Type : Mini XLR 3-pin female.