Product Introduction 1mm Thickness Titanium Sintered Metal Porous Filter Plate is a type of filter plate made of titanium metal that has undergone a sintering process. In the sintering process, titanium particles are heated to a high temperature and pressed together to form a porous structure. This structure contains small channels or holes that allow fluids or gases to pass through while capturing solid particles or impurities. The porous structure of the Titanium Sintered Metal Porous Filter Plate is typically created by using a powder metallurgy process. In this process, titanium particles are first compacted into a green body, which is then subjected to a high-temperature sintering process. During sintering, the particles fuse to form a solid mass with a porous structure. Titanium is a popular choice for sintered metal filter plates due to its excellent mechanical properties, corrosion resistance, and biocompatibility. The porous structure of the Titanium Sintered Metal Porous Filter Plate can be tailored to achieve specific filtration requirements, such as pore size, pore distribution, and permeability. Parameter Material: GR1 titanium powder Filtration precision:20um Porosity: 30-40% Operating temperature: â?¤300â?? Diameter: 100mm Thickness: 1mm
5um Porous Parts Sintered Copper Filter Disc is a type of filter made by sintering copper particles together to form a porous structure. Sintering is a process in which metal or ceramic particles are heated to a temperature below their melting point, causing them to fuse together into a solid mass. 5um Porous Parts Sintered Copper Filter Disc consists of multiple layers of copper particles that are sintered together to create a filter with a controlled pore size distribution. The pores in the filter allow fluid to pass through while trapping particles that are larger than the pore size. 5um Porous Parts Sintered Copper Filter Disc is often preferred over other types of filters due to its high porosity, durability, and resistance to corrosion and high temperatures. They can be produced with different pore sizes, thicknesses, and shapes to meet specific application requirements. Additionally, they can be easily cleaned and reused, making them a cost-effective solution for many filtration applications. Parameter Material: brass/copper/bronze Filtration accuracy: 0.5um Diameter: 30mm Thickness: 1mm Porosity: 67% Working temperature:
Product Introduction 30um titanium sintered porous metal filter tube is a type of filter made from titanium that is used to remove impurities or contaminants from a fluid or gas. These tubes are typically cylindrical in shape and have a porous structure that allows the fluid or gas to pass through while trapping any unwanted particles or substances. Titanium is a popular material for filter tubes due to its high strength, corrosion resistance, and biocompatibility. It is commonly used in a variety of industries, including aerospace, medical, and chemical processing. Titanium filter tubes can be customized to meet specific filtration requirements, such as pore size, flow rate, and filtration efficiency. They can also be designed to withstand high temperatures and pressures, making them suitable for use in harsh environments. Parameters Name:30um titanium sintered porous metal filter tube Brand: TOPTITECH Material: titanium powder Process: sintering Filtration precision:30um Size:�?30*80mm Porosity: 35% Features Corrosion resistance: Titanium is highly resistant to corrosion, even in harsh environments, making it an ideal material for filter tubes exposed to corrosive fluids or gases. High strength-to-weight ratio: Titanium is a lightweight, yet strong material, which makes it ideal for applications where weight and strength are important factors. Temperature resistance: Titanium has a high melting point and can withstand high temperatures, which makes it suitable for use in applications that involve high temperatures or thermal cycling. Customizability: Titanium filter tubes can be customized to meet specific filtration requirements, including pore size, flow rate, and filtration efficiency. This allows for greater flexibility in designing filtration systems that are tailored to particular applications.
Product Introduction 40 Micron Stainless Steel Sintered Wire Mesh Filter Element is a type of filter that is made by sintering multiple layers of stainless steel wire mesh together. Sintering is a process that involves compacting and heating a material without melting it, which causes the particles to fuse together and form a solid mass. 40 Micron Stainless Steel Sintered Wire Mesh Filter Element consists of multiple layers of wire mesh that are stacked and then sintered together. The sintering process creates a solid bond between the wires, resulting in a robust and durable filter element that can withstand high temperatures, pressures, and corrosive environments. Parameter Material: stainless steel Grade:SS 316L, SS 304L, SS 316, SS 304 OD: Max. 200mm Length: Max. 1500mm Accuracy / Pore Size: 0.2um-200um Porosity: 30%-60% Temperature resistance: â?¤300â?? Technique: Sintering Process Surface: Smooth, clean and metallic Feature 40 Micron Stainless Steel Sintered Wire Mesh Filter Element has several advantages over other types of filters. First, it has a uniform and controlled pore size, which ensures consistent filtration performance. Second, it has a high dirt-holding capacity, which means that it can capture a large amount of contaminants before needing to be cleaned or replaced. Third, it has excellent mechanical strength, allowing it to withstand high pressures and mechanical stresses. Fourthly, it can be cleaned and reused, making them a cost-effective and environmentally friendly filtration solution.
Product Introduction Multi-layer sintered metal mesh filters combine the advantages of woven wire mesh, with micron-level pore sizes and a diffusion-bonded wire mesh laminated plate, to provide mechanical strength and stability. Typically, fine woven metal wire mesh filters are placed within multiple layers of sintered laminated plates to protect the fine mesh from mechanical damage caused by environmental pressure. 5-layer sintered laminated plates are commonly used for sintered wire mesh filters. Due to their stability, mechanical strength, and durability, multi-layer sintered metal mesh filters can be made into various sintered filter elements, such as cylinders, filter cartridges, candles, and discs. TOPTITECH provides customized sintered wire mesh filters to meet your specific requirements. We are committed to providing customers with high-quality filtration solutions, ensuring stability and efficiency in various applications. Parameters Material: SUS334L SUS316L layers: single layer, 2 to 3 layers, 5 layers, and 6 layers or customized Sheet sizeï¼?18" �? 48" 24" �? 48" customized Application Oil and gas production Drug Chemical industry Food Aerospace Polymer filtration Energy and Nuclear Power
Product Introduction Polished stainless steel powder filter elements are manufactured using high-quality stainless steel powder that has been processed using advanced technology. These filters have a uniform structure with high porosity and pore diameter ranging from 0.2 m to 100 m, and porosity between 35% to 60%. Polished stainless steel powder filter elements are available in various shapes and sizes, including cylindrical and disc-shaped. The cylindrical filter elements have a diameter ranging from 10mm to 1000mm, while the disc-shaped filter elements have a diameter ranging from 5mm to 300mm. The filter elements generate uniform filtration and have low resistance, which reduces energy consumption. Products Parameters Material: S304/SS316L Outer diameter: 5 300mm Length: 10 1000mm (more than 1000mm can be welded) Filtration accuracy: 0.2um 100um Surface treatment Polished Inlet/outlet connection Screw thread, flange Features durability, corrosion resistance, and high-temperature tolerance can be cleaned and reused multiple times Additionally, the polishing process helps create a smoother surface, improving the filter´s efficiency and reducing the risk of clogging. Compatibility: Polish stainless steel filters are compatible with various liquids and gases, including corrosive and high-temperature fluids. They are also resistant to many chemicals, making them suitable for use in harsh environments.
Product Introduction Most Muti-layer Stainless Steel Sintered Mesh Filter Element, including conventional and pleated types, are constructed of premium stainless steel. The pleated type sintered mesh filter cartridge has a greater filtering surface than the conventional type, and both have strong mechanical strength and pressure tolerance. They resist corrosion and are simple to clean. Sintered mesh filter cartridges are used in the liquid and gas filtration, chemical fiber filtration, polyester, and water treatment sectors because of their great resilience and long service life. The protective layer, filter layer, and support layer make up the Muti-layer Stainless Steel Sintered Mesh Filter Element. The multi-layer sintered laminates contain the fine woven wire mesh (the filter layer). The laminates shield the fine mesh from mechanical harm caused by pressure from the outside environment. The mechanical strength, stability, and longevity of the three, four, and five layers make them attractive. Parameter Material: stainless steel 304, 304L, 316, 316L Length: 10-1500mm Diameter: 10-80mm Wall thickness: 10-50mm Filtration accuracy: 0.2-300um Layers: Single, 2 to 3, 5-layer & 6-layer or customized Porosity: 35%-80% Service temperature: -200 C to 1000 C Features: 1.) Better mechanical properties; 2.) Good stable pore size; 3.) Easy cleaning, reusable and durable; 4.) Stable pore shapes for perfect permeability; 5.) Reliable quality, big particles filtration; 6.) Attractive surface; 7.) Excellent anti-acid, anti-alkahi, resist-temperature, resist-wearing; resist-recycling; Application 1.) Oil & Gas production 2.) Water treatment; 3.) Food and beverage; 4.) Pharmacy; 5.) Chemical industry; 6.) Polymer filtration; 7.) Refine; 8.) Energy & nuclear.
Product Introduction The titanium rod filter element is made of industrial high-purity titanium powder (99.4%). No particle falling off, no secondary pollution of the original solution, in line with food hygiene and pharmaceutical GMP requirements. Good mechanical performance can be press-filtered or suction-filtered, and easy to operate. Low differential pressure, small footprint, and large flow. It can be regenerated online, is easy to clean, and has a long service life (usually several times that of membrane filter elements) Parameters Filtration accuracy: 0.22�¼m-100�¼m Porosity: 28-50% Air permeability: 0.02-20M3cm/m2h.mmH2O Compressive strength: 0.5-1.5Mpa Temperature resistance: 280�°C (wet state) Connection:M20 M30 M36 M42 215 222 226 DOE and customized Maximum working pressure difference: 0.6Mpa All specifications can be customized. Application With its unique performance, titanium rod filter element can be widely used in pharmaceutical industry, water treatment industry, food industry, bioengineering, chemical industry, petrochemical industry, metallurgical industry and gas purification fields. Typical uses include: In the pharmaceutical industry, it is used for decarbonization filtration in the concentrated preparation of large infusions, small injections, eye drops, and oral liquids, and security filtration before terminal filtration in the diluted preparations. Impurity removal and filtration in the production process of raw materials, decarbonization filtration and fine filtration of materials. Security filtration of ultrafiltration, RO and EDI systems in the water treatment industry, filtration after ozone sterilization and ozone aeration. Decarbonization filtration and precision filtration of liquid products, liquid raw materials, and pharmaceutical intermediates in the chemical industry, filtration and recovery of ultrafine fine particles and catalysts, precision filtration after resin adsorption, and impurity removal and filtration of system heat transfer oil and materials, catalysis Gas rest purification, etc. High-temperature decarbonization and white clay filtration in the dye industry.
Product Introduction The Sintered Stainless Steel Porous Metal Filter Tube is created from irregularly-shaped stainless steel powder, typically AISI 316L. The powder is compressed into a mold, then sintered at high temperatures to form a porous tube with exceptional resistance to high temperatures, corrosion, and mechanical strain. The pore size of the filter can be determined by the choice of powder and the applied pressure during compression. The shape, size, and distribution of the powder impact the final properties of the filter. At filtration accuracies of 70�µm or finer, particle chipping can be an issue with some filters. However, our sintered metal tube avoids this problem thanks to our advanced vacuum sintering equipment and skilled production staff. Furthermore, each sintered metal tube undergoes rigorous testing with bubble point and air permeability tests according to ISO 4003 and ISO 4022, respectively. This ensures that our filters are of the highest quality and meet the needs of every customer. Parameters: Brand: TOPTITECH Length: 50-1016mm Diameter: 4-500mm Wall thickness:1-5mm Filtration accuracy: 0.22-100um Operating temperature: 600â?? Working pressure: 3Mpa Porosity: 35%-60% All specifications can be customized. Features 1. Resistant to high temperatures up to 600â?? during normal use. 2. Strong mechanical strength and good plasticity, allowing for machining. 3. Resistant to corrosion and oxidation, suitable for use in nitric acid, sulfuric acid, dilute hydrochloric acid (5%), acetic acid, liquid hydrogen, and liquid nitrogen environments. 4. Capable of being molded according to customer drawings, with an efficient molding process. 5. Provides high filtration accuracy and effective purification. 6. Uniform pore size and stable internal structure, with no particle shedding. 7. Allows for good air permeability and easy back blow cleaning, with the ability to be repeatedly regenerated online. 8. Exhibits excellent wear and impact resistance, with strong mechanical properties. Contact Us TEL: +8619992203758 FAX: 0917-3873009 Email:karrykang@bjygti.com Company: TOPTITECH -- BAOJI YINGGAOCO., LTD Website:https://www.toptitech.com/ ADD: No. 195, Gaoxin Avenue, High-tech Development Zone, Baoji City, Shaanxi, China
Product Introduction Sintered porous titanium rod filter cartridges are unique because of their exceptional strength, durability, and resistance to corrosion. These filters are made by compressing and sintering titanium powder to form a solid tube with a precisely controlled pore structure. The resulting material is highly porous and provides excellent filtration efficiency and flow rate. Sintered porous titanium rod filter cartridges are designed to have a highly controlled pore structure, which allows for precise filtration of contaminants based on their size and shape. Parameters Material: metal titanium powder Outer diameter: �¤10 20 30 40 50 60 mm Length: 10 20 30 40 Filter connector: M20 M30 222 226 Filtration accuracy: 0.5um, 1um, 3um, 5um, 10um, 20um, 50um Working pressure: 0.1MPa 0.6MPa Working temperature: 300 Flow rate: 0.5m3/h 200m3/h Features 1. High efficiency: Sintered porous titanium rod filter cartridges have a high filtration efficiency, meaning they can effectively remove particles and contaminants of various sizes and shapes. 2. High flow rate: Sintered porous titanium rod filter cartridges can handle high flow rates without clogging, which is important in applications where a high filtration rate is required. 3. High dirt holding capacity: Sintered porous titanium filter tubes have a high dirt holding capacity, meaning they can hold a large number of contaminants before needing to be cleaned or replaced. Applications in harsh environments Sintered porous titanium filter tubes can be useful in harsh environments where other filters may fail due to extreme temperatures, pressures, or corrosive substances. For example, in the oil and gas industry, drilling operations often produce fluids that contain abrasive particles, corrosive chemicals, and high temperatures and pressures. Sintered porous titanium filter tubes can be used to filter out these contaminants and protect downstream equipment, such as pumps and valves, from damage. In the chemical processing industry, sintered porous titanium filter tubes can be used to filter out corrosive substances and maintain the purity of chemical products. These filters can withstand the harsh chemical environments and high temperatures and pressures that are common in chemical processing applications. Overall, sintered porous titanium filter tubes are suitable for use in a wide range of harsh environments, where they offer excellent filtration performance and durability.
Product Introduction The multi-layer metal sintered mesh filter element is made of metal meshes with different wire diameters and meshes sorted in a certain order and sintered at high temperatures. It has higher strength than stainless steel fiber felt, better permeability than metal powder products, uniform pore size distribution, good permeability, high strength, strong corrosion resistance, high temperature resistance, weldable, renewable, long life, easy to clean and not easy to break. Multi-layer metal sintered mesh filter elements are widely used in the filtration of high-temperature and high-pressure media (liquid-solid separation, gas-solid separation) in machinery ships, petroleum, chemical industry, power plants, fuel, pharmaceuticals, food and other industries, such as oil sand separation in oil fields ; high temperature gas dust removal; beverage filtration; oil filtration and water treatment, etc. Product parameters Material: stainless steel 304 or 316L; Size: 1000mmx500mm, 1200mmx600mm, 1000mmx1000mm (customizable); Filtration accuracy: 2um-300um; Classification: single-layer, double-layer, three-layer, five-layer, seven-layer and multi-layer metal Note: Special specifications can be customized according to the requirements of the buyer.
Sintered stainless steel filter discs, also called sintered metal porous filters, adopt stainless steel 316, 316L powder as raw materials and then produced through sizing, molding and sintering processes. Sintered stainless steel filter discs have found widespread use in industries such as environmental protection, petroleum, natural gas, chemical, environmental detection, instrumentation, pharmaceutical equipment, and others. Product Parameters Material:304, SS 316L, stainless steel Max pressure:5MPa Max temperature:600 degree Types:disc, plate, cup, tube cartridge, irregular Diameter Size:2.0 mm to 450 mm Height Size:1.0 mm to 100 mm Pore Size:stainless steel (0.2-120um) Product Features 1. Superior to conventional metal filter materials in terms of shape stability, impact resistance, and alternating load capacity. 2. Air permeability, with a stable separation effectï¼? 3. High loading and unloading strength, making it suited for usage in high temperature, high pressure, and corrosive situations 4. Particularly suited to high-temperature gas filtration; 5. Products of various shapes and precision can be customized according to user requirements, and can also be used for various interfaces by welding. Applications When the filter cake on the surface of the sintered metal powder filter element reaches a certain thickness, due to its high-strength performance characteristics, the filter element can be cleaned by backwashing or backflushing through a certain reverse pressure, so that the filter element can be used again. . Because of its many characteristics and the characteristics of repeated cleaning and reuse, it is widely used in water treatment, petrochemical filtration, seawater desalination, chemical filtration, resin and coating, hydroelectric power generation and other fields.
Product Introduction The Sintered SS 316 Wire Mesh Filter Pipe, is a brand-new kind of filter material, composed of multi-layer metal sintered mesh, which has high strength and overall rigidity. The meshes of the net are interlaced to form a uniform and ideal filtering structure. The Sintered SS 316 Wire Mesh Filter Pipe is generally divided into five layers, which are divided into four parts: protective layer, filter layer, separation layer, and support layer. This type of filter material has a high degree of strength and rigidity, as well as uniform and steady filtration precision. It is an ideal filter material for occasions that require high requirements and uniform filter particle size. Products Parameters Materials: SS304 SS304L SS316 SS316L Filtration accuracy: 1-300um Temperature resistance: -200 ~ 650 General Thickness: 1.7mm General Size: 500mmX1000mm, 1000mmX1200mm Compressive strength: 2-3Mpa Products Features A wide variety of accuracy in filtering Have dependable filtering performance from 1 to 300 Filtration accuracy is stable The filter layer�´s wire mesh is resistant to deformation because of the protection provided by the top and lower layers of wire mesh and the sintering process of diffusion and solidification Corrosion protection high temperature resistance below 650�°C. It has a high level of corrosion protection because SS316, SS304, and other materials are used It is simple to clean Surface filter material is used, making it simple to clean and particularly suitable for backwashing Products Application Stainless steel sintered mesh is a new type of filter material with high strength and overall rigidity made of stainless steel mesh through special lamination and vacuum sintering. The meshes between the layers of mesh are interlaced to form a uniform and ideal filter structure. Package and Shipment 1. Sintered Filters are usually packed in cartons, wrapped in soft film, and fixed in a box filled with industrial foam cotton, and the outer baler is packed with plastic bags with no damage during transportation. 2. Wooden box export packaging can also be customized. The foam cotton can be filled and fixed, the external box is sealed, the bottom is specified, the whole packaging is processed, and the goods can be delivered to the designated place of the customer without damage.
The sintered powder metal filter is made of metal powder pressed through a mold and then sintered at a high temperature. It has the advantages of high mechanical strength, high-temperature resistance, good corrosion resistance, uniform pore size distribution, good air permeability, cleanable regeneration, welding, machining, etc. The sintered powder metal filters are widely used in gas-liquid filtration and separation in the fields of the chemical industry, medicine, beverage, food, metallurgy, petroleum, environmental protection and fermentation, dust removal, sterilization, and oil mist removal of various gases and steam; gas buffer, etc.
JH GLASS may offer high quality mirror products : **Silver mirror Thickness from 2-8mm Colour : bronze, grey, blue ,pink,green ,golden, ultra clear Size : 2140x3300mm/1830x2440mm,2440x3660mm Cut size available Advantage :high reflectance /lasting durability./ easy processing, **Aluminum mirror Thickness from1.8-6mm Colour :clear ,bronze, grey Size :2140x3300mm/1830x2440mm/1220x1830mm Cut size available Advantage : economical and practical / easy processing, **Copper free mirror Thickness : from 2-6mm Colour : clear,ultra clear Size :2140x3300mm,2440x3660mm Advantage : environment friendly / high reflectance /lasting durability./ easy processing, **Processed mirror pc film (CAT I) back mirror lattice film(CAT II) back of mirror , beveled edge mirror pencil ,flat polished edge mirror combined mirror
Applicable Industries Manufacturing Plant, filtation system Product name inconel powder sintered filter Material stainless steel304/316L, bronze, brass Pore size 3 5 7 10 15 20 40 50 60 70 90um Porosity 35%-45% Filter media Porous Metal Technique Powder sintering/wire mesh Application Gas, liquid, and solid filtration, seperation Feature Uniform distribution of particles, no slag, beautiful appearance Special service Personal customization and proofing, help design better products OEM/ODM Available
Jaggery is a traditional sweetener made by evaporating raw sugarcane juice without separating the molasses from the crystals. The common name in India is " Gur ". It is softer and has lot of nutritious content. It contains trace minerals and vitamins which makes it a true healthy alternative sweetener. Organic jaggery contains trace minerals such as potassium, magnesium, iron, phosphorous and calcium. Jaggery cube In whole Form - easy to use can be reduced to small cubes or powder (jaggery powder) - can be directly added to tea/coffee/juices. Use while preparing chikkis of peanut (groundnut) | Needs no filtering! Hygienically prepared using traditional methods | Traditional Indian Sweetener rich in Iron, Minerals & Antioxidants! Healthy & Tasty alternative to refined white sugar! No Added Preservatives | No Synthetic Colors/ Artificial Flavors | No Harmful Chemicals / Bleaching Agents! | Pack- 400g pack for easy pantry storage and keep in air tight jar or container for better shelf life. Make sure gud not exposed to moisture or it will be in melting state, but good to use. Jaggery is a natural body cleanser, which helps detoxify the liver. All you need to do is add it in your tea instead of sugar to reap the benefits. Jaggery produces heat in the body, which is why generally people consume it in winters. One of the most well-known benefits of jaggery is its ability to purify the blood. Jaggery also helps increase the total count of hemoglobin in the blood. We use the most nutritious sugar canes to extract our jaggery cubes and ensure it is brought to you free of all chemicals and rich in vitamins and minerals
TOPTITECH's porous sintered stainless steel filter ring is a highly efficient filtration solution specifically designed for food and beverage processing applications. Crafted with precision using high-quality stainless steel, this filter ring offers exceptional durability, reliable performance, and precise particle retention capabilities. With its advanced design and construction, it is an ideal choice for industries that demand efficient and hygienic filtration of liquids and gases in food and beverage processing. Parameters Pore size:0.2-100microns Materials: SS Metal Porosity:30%~45% Working Pressure:3MPa Operating Temperature:600 Features High Filtration Efficiency: The porous structure of the sintered stainless steel filter ring ensures excellent filtration efficiency by effectively trapping particles and impurities of various sizes. It provides reliable particle retention, allowing only clean and filtered fluids or gases to pass through. Enhanced Durability: Constructed from high-quality stainless steel, this filter ring exhibits exceptional resistance to corrosion, heat, and chemical reactions. It withstands demanding processing conditions, ensuring long-lasting performance and minimizing the need for frequent replacements. Easy Maintenance: The filter ring is easy to clean, thanks to its smooth and accessible surface. By dislodging trapped particles quickly and efficiently, it facilitates hassle-free maintenance and reduces downtime in food and beverage processing operations. Optimal Hygiene Standards: Our sintered stainless steel filter ring is designed to meet strict hygiene requirements in the food and beverage industry. It is easy to sanitize and sterilize, making it suitable for applications where cleanliness and product integrity are of utmost importance. Applications Beverage Filtration Food Processing Brewery and Winery Operations Pharmaceutical Applications
TOPTITECH's 30" SUS 316L Sintered Alloy Porous Filter Elements are crafted from premium SUS 316L stainless steel alloy, ensuring durability and reliability in demanding environments. The sintered alloy construction provides excellent resistance to heat, corrosion, and physical wear, making them ideal for challenging filtration applications. The linked pores in the porous structure of the 30" SUS 316L Sintered Alloy Porous Filter Elements facilitate the effective removal of pollutants. The large surface area facilitates optimal particle capture, ensuring high filtration efficiency while minimizing pressure drop. With customizable configurations available, TOPTITECH can tailor the pore size, thickness, and shape to meet specific filtration needs. Parameter Material: SUS 316L Length: 30â?? Diameter: 30mm Pore size: 15 um Wall thickness: 2.5mm Connector: 1/2â?? NPT Features Exceptional Durability High Filtration Efficiency Robust Heat and Corrosion Resistance Customizable Configurations Wide Range of Applications What is 1/2â?? NPT connector? The 1/2â?? NPT interface refers to a common standard for pipe threads used in connecting fittings and components. NPT stands for National Pipe Taper, which is a widely adopted thread standard in the United States. In this product, 1/2â?? NPT indicates that the thread size of the interface is 1/2 inch. NPT interfaces feature a tapered thread design, where the threads gradually narrow toward the end of the pipe, creating a cone shape. This design ensures a secure connection that helps prevent oil or gas leakage effectively. The 1/2â?? NPT interface finds extensive applications in various industries, including fluid and gas transfer systems, pipe connections, valves, instruments, and other equipment involving pipe connections. It is widely embraced in industrial settings due to its ease of installation, high reliability, and ability to withstand high-pressure and temperature environments. It is important to note that NPT interfaces are tapered thread standards and are not compatible with parallel threads (such as NPS). Therefore, when selecting and connecting fittings, it is crucial to ensure the use of the same type of thread to achieve tight and reliable connections.