FEATURES Built-in needle threader Reverse stitch lever Snap-on presser feet Stitch selection dial Foot pressure adjustment 18 stitches 1 one step buttonhole Manual, lay-in thread tension 5-piece feed dog Free arm Drop Feed Push-pull bobbin winder Extra high presser foot left Horizontal, full rotary hook bobbin system 6.5mm maximum stitch width 4mm maximum stitch length Heavy Duty frame Hard cover included INCLUDED ACCESSORIES Blind Hem Foot G Buttonhole Foot R (Automatic) Hemmer Foot 2mm D Overedge Foot C Bobbins Felt Lint Brush Quilting Bar Screwdriver (large) Screwdriver (small) Seam Ripper Set of Needles Spool Holder (large) Spool Holder (small) Spool Pin
SPECIFICATIONS Control system Computer Number of stitch patterns 287 Number of available fonts 4 Buttonhole Automatic (sensor system) with clamping plate Direct stitch pattern selection 10 patterns Start/stop button Green: Ready to start and/or while sewing Red: Not ready to start Orange: When the lock stitch button is pressed while the sewing machine is engaged in pattern sewing Maximum stitch speed 1,050 sti/min Thread tension system Automatic Presser foot pressure adjustment Stepless adjustment Bobbin thread winder Bobbin winder with independent motor Light 1 LED light Change in the length/width of stitches Button system Number of needle position (straight stitch/other than straight stitch) 37 / 3 Memory function 10 patterns Height of lifting of presser foot (1 step/2 steps) Button system: 6 mm Lever system: 6 mm / 12 mm Wide table Included Foot controller Included; with foot switch function Auto thread trimming Automatic needle threader Automatic lock stitch and thread trimming BOX feed mechanism Drop feed Quick bobbin preparation Straight stitch slide plate Float function Free arm Pattern (right and left) reverse Twin needle sewing Adjustable starting / reverse stitch speed Lock stitch Low-speed inching sewing Presser foot pivot function Presser foot horizontality holder button Hard case with accessory storage part Knee lifting lever
SPECIFICATIONS Control system Computer Number of stitch patterns 287 Number of available fonts 4 Buttonhole Automatic (sensor system) with clamping plate Direct stitch pattern selection 10 patterns Start/stop button Green: Ready to start and/or while sewing Red: Not ready to start Orange: When the lock stitch button is pressed while the sewing machine is engaged in pattern sewing Maximum stitch speed 1,050 sti/min Thread tension system Automatic Presser foot pressure adjustment Stepless adjustment Bobbin thread winder Bobbin winder with independent motor Light 1 LED light Change in the length/width of stitches Button system Number of needle position (straight stitch/other than straight stitch) 37 / 3 Memory function 10 patterns Height of lifting of presser foot (1 step/2 steps) Button system: 6 mm Lever system: 6 mm / 12 mm Wide table Included Foot controller Included; with foot switch function Auto thread trimming Automatic needle threader Automatic lock stitch and thread trimming BOX feed mechanism Drop feed Quick bobbin preparation Straight stitch slide plate Float function Free arm Pattern (right and left) reverse Twin needle sewing Adjustable starting / reverse stitch speed Lock stitch Low-speed inching sewing Presser foot pivot function Presser foot horizontality holder button Hard case with accessory storage part Knee lifting lever
Circular Looms Jaiko Industries (A JP Group Company) offers a range of circular looms for weaving light to heavy weight tubular or flat PP/HDPE fabrics for a wide variety of end applications. Jaiko’s loom ranges from 4 shuttle for open mesh (leno weave) packaging fabric for fruits & vegetable, to 6 shuttle for a wide range of packaging applications such as cement, fertilizer, polymer granules, chemicals, grains, animal feed, seeds and husk and 8 shuttle for the production of wide width fabric for Jumbo bags (FIBC’s), tarpaulins and Geo & agro textiles. It has advantages of the latest technology higher operating efficiencies, excellent weaving quality, lower wastage, lower energy consumption, lower maintenance etc. Our looms are available under machine models: Jaiko 4, Vega 6, Vega HS, Jaiko 6 LN, Jaiko 608, Jaiko 810, Jaiko 811, Jaoko 812 LF, Jaiko 812 HF, Jiko 814 LF and Jiko 814 HF Jaiko Vega 6 & Vega 6 HS Technical Specification Technical Specification Vega 6 Vega 6 HS Working Width (Double Flat) 30 to 90 cms 30 to 90 cms Nos. of Shuttles / Loom 6 6 Weft Insertion 1000 ppm* 1100 ppm* Core Diameter (Inside) 35 mm** 35 mm ** Warp / Weft Core Length 218 mm** 218 mm** Warp Bobbins Diameter (Maximum) 160 mm** 160 mm** Weft Bobbins Diameter (Maximum) 115 mm 115 mm Nos. of Warp Bobbins 576 / 720 nos. 576 / 720 nos. Winding Roll Diameter (Maximum) 1500 mm 1500 mm Dimension (Length / Width / Height) mm 10227 / 2797 / 3037 10227 / 2797 / 3037
Place of Origin:Guangdong, China (Mainland) Brand Name:Rosslyn Model Number:OEM Type:Hotel Accessories Keyword:cheap hotel supplies PAYMENT TERMS:T/T,L/C,WESTERN UNION Usage:Hotel Guest Used MOQ:10000pcs Certificate:GMPC,ISO22716,FSC
Place of Origin:Guangdong, China (Mainland) Brand Name:Rosslyn Model Number:S-036 Type:sewing kit Keyword:cheap hotel supplies PAYMENT TERMS:T/T,WESTERN UNION,payapl Usage:Hotel Guest Used MOQ:10000pcs Certificate:GMPC,ISO22716,FSC
QJH910 flexible rapier loom is the most popular machine and the representative of mature technology among all the weaving looms we supply. This high speed rapier loom model has applied the latest mechatronics technology, and can achieve stable performance with low vibration and less noise. The machine can also change weaving speed to suit various weaving needs. It is one of the most economical textile looms for sale with high intelligence and high cost performance. Salient Features Accurate Control The weaving loom adopts digital loop control servo electronic let-off and take-up, to achieve the constant tension weaving. Strong Beat-up Powerful bilateral conjugate cam generates strong beating rigidity. Optimal Fabric Quality With the functions of digital control positioning stop and run, intelligent auto pick finding, auto compensation for weft breakage and warp breakage, the flexible rapier loom can improve the fabric quality. Fast Fault Control The loom can realize intelligent fault display and accurately determine the fault reason, and provide test scheme. Convenient Management The loom can automatically calculate yield and total output, and can realize group control by management network. it also has the function of changing fabric variety in the shortest time. Technical Parameters Width 190cm, 210cm, 220cm, 230cm, 260cm, 280cm, 300cm, 320cm, 340cm, 360cm Operation speed 190cm 380~420rpm 280cm 258~285rpm 320cm 226~250rpm Yarn scope 3s~80s, cotton, wool, linen, blended yarn, polyester and etc. Weft density 1.57~134 picks/cm Take up electronic take-up driven by servo motor, beam diameter 600mm (on loom) or 1200mm (off loom) Let off electronic let-off driven by servo motor, beam diameter 800mm or 1000mm Shedding Underneath type electronic dobby 12~20 frames Color selector high speed electronic weft selector controlled by stepping motor, 4~16 colors Weft insertion maximum 1080m/min Selvage electronic leno selvage device Main drive high power main motor, power rating 5.5KW Automatic functions automatic warp stop, automatic weft stop, automatic pick finding Electronic control With 32-bit CPU control system and embedded software, the rapier loom can guarantee with highest fabric quality, prompt detection of machine error and the convenient management.
QJH810 rapier loom has been a best seller since the first machine was released to the market. It is an auto loom machine that carries excellent mechanical and electronic performance. This type of weaving loom machine has a precise control of the tension from warp and weft, hence improving the fabric quality. The weaving adaptability of QJH810 is very extensive, including natural fibers like cotton, wool, linen, silk, artificial fiber and all kinds of light, medium, heavy weight blended fibers. This model is the best price loom machine for sale in our company. Salient Features High Cost Performance and Practicability The loom embodies nice appearance, reliable structure, advanced electrical control system and convenient operation; it has low energy consumption and easy maintenance. Special Design of Conjugate Cam Our technicians use computer technology to optimize the contour line of the conjugate cam to ensure a more reliable and stable acceleration movement during weft insertion process. The conjugate cam is made from composite steel to realize an excellent performance in strength and endurance. Diversified Configuration Customers have a choice to make changes on take up mechanism, let off mechanism according to their practical usage. This model can also match with SRD motor, without clutch and reduction gearbox driving device, the structure of the loom is more simple and stable. The changes of the structure will save at least 15% of electricity than the common clutch model. SRD motor is new type of high technical machine with high efficiency and stability and can be easily maintained. Technical Parameters Width 190cm(75"), 210cm(82"), 230cm(90"), 280cm(110"), 300cm(118"), 340cm(134") Operation speed 180~360rpm Yarn scope short fiber 5-500Tex (200-2Nm), filament 15-3500Td (1.7-380Tex) Weft density 3~80 picks/cm Take up mechanical or electronic take-up, maximum cloth diameter Ï?550mm on loom and Ï?1200mm off loom Let off mechanical or electronic let-off, beam diameter Ï?800mm or Ï?1000mm Shedding cam shedding (4~8 frames), mechanical dobby, electronic dobby (12~20 frames), electronic jacquard Color selector electromagnetic type, 4~8 colors Weft insertion maximum 1080m/min Selvage electronic leno selvage device Main drive 4KW; direct drive also available Automatic functions automatic warp stop, automatic weft stop, automatic pick finding Electronic control advanced 32 bit single chip microcomputer Fabric weight 20-450g/m ²
GA736 rapier weaving machine has absorbed all the features of GA788, and is especially suitable for weaving thick heavy fabrics. The loom is controlled by micro-computer and equipped with automatic warp stop device, automatic weft stop devices. Wall frames are strengthened to offer better performance for enhance fabric quality. This rapier weaving machine uses 4 levers, short connectors and short sley to complete the beat-up motion, the shaft adopts 110mm seamless tube to ensure the beat-up strength so that the machine is suitable for high-speed running and weaving heavy fabrics. The rapier transmission box adopts the advanced helix umbrella gears to ensure stable transmission. The adoption of two pressing rollers helps the worker to unload the fabric from the fabric roller without stop. We give competitive china rapier loom price to our partners and customers. The warp let off motion is a positive type in continuous move, it involves infinitely variable speed device with warp tension feedback device. It can move synchronism with the pick finding device of the loom and keep tension. Salient Features Nice appearance Excellent performance Strong structure and heavy machine body Low noise Long life Easy maintenance Continuous take-up mechanism Double fabric pressing rollers Technical Parameters Width 1800mm-3600mm Operation speed Maximum weft insertion 160~220 picks/min Yarn Cotton 7Ne~60Ne Wool 12Nm~100Nm Artificial fiber 750D~30D Fabric weight From 50 to 600g/sq.m. Weft density 10~47picks/cm Take-up Continuous take-up, maximum rolling dimension 600mm or 400mm Let-off Friction infinitely variable speed type let-off, beam diameter 800mm or 680mm Beat-up Four-bar linkage with continuous short connecting rod Warp stop Electrical warp stop device with 6 bars Weft stop Electronic weft monitor with high sensitivity Shedding Inhead type mechanical dobby or electronic dobby, 20 heald frames at most; electronic jacquard also available Color selector 4~6 colors Selvage Leno selvage driven by 1st and 2nd shafts of heald frames; left, right and central tuck in device optional Main drive 2.6~3KW-8pole Electronic control Electronic control system
GA738-I Towel Loom As an integrated auto loom machine manufacturer in China, we never stop on the research and development of towel weaving looms. GA738-I rapier towel loom has the features of the latest technology, and it is a matured textile loom machine suitable for weaving all kinds of facecloth, tea cloth, hand towel and bath towel, with material of cotton, wool and blended yarns. Salient Features The towel loom is an updated model on our former machine, with a new design of the whole back frame. The application of integrated steel wall and strengthened crossbeam have improved the rigidity, weight and stability of the whole towel loom. The bent axel, center shaft, rockshaft, take-up roller adopt bearing support, so that the machine load can be decreased, making the rotation more flexible and maintenance more convenient. The loom adopts collision style cam terry pilling which is simple and reliable, mechanical control and electronic control both available. The loom adopts special design of pilling structure that narrows the distance between first piece heald frame and reed, decreasing the shedding height and warp breakage. The loom has a simple and friendly appearance with stable and reliable function. It is a suitable model for replacing shuttle towel looms. Technical Parameters Width 180(74 ), 200cm(78 ), 230cm(90 ), 250cm(98 ) Operation speed 150~200rpm Yarn count cotton 7Ne~60Ne, wool 12Nm~100Nm, chemical fiber 100D~650D Take up roller diameter Ï?400mm Let off Upper: positive electric let-off with beam diameter Ï?600mm; ground: intermittent mechanical let-off, beam diameter Ï?600mm Shedding mechanical or electronic dobby; cam shedding; electronic jacquard Color selector 6~8 colors Terry pilling movable reed Terry height 2~12 times stepless adjustment Weft stop Piezoelectric control Warp stop 2 row electric warp stop Main drive 1.8KW~2.2KW Electronic control PLC control Weight 1900KG~2300KG Overall size 4300*2000*2220(200CM/78 )
GA738-II Underneath Type Dobby Towel Loom Technical Parameters Width 200cm~280cm Operation speed Maximum weft insertion 250 picks/min, maximum weft insertion rate 750m/min Weft yarn count range cotton 5Ne~80Ne Wool 8Nm~130Nm Man-made fiber 1200dtex~75tex Take up Servo take-up, weft density 4~200picks/cm, maximum rolling dimension 600mm. Off-loom big roller also available. Let off Servo let-off, weft density 4~200picks/cm, diameter beam flange 800 or 680mm Shedding Underneath type electronic dobby, maximum 20 shafts; 12mm pitch, can also match with electronic jacquard Fabric weight From 50 to 800g/sq.m. Weft selection Electronic weft selection which is available in single or mixed or multicolor up to 8 colors. Weft feed The loom is possible to be equipped with different types of weft accumulators. Weft stop Electronic weft monitor with high sensitivity Warp stop Electric warp stop device with 6 bars Main drive Main motor 2.6~3KW-8 pole Electronic control The most advanced electrical control system, microprocessor units guarantee all the machine functions, supervising operation, collecting and displaying of production data. Selvedge Leno selvedges are driven by the 1st and 2nd shaft of heald frame, or independent servo selvage device Lubrication Central auto oiling pump system
GA798-I Electronic Jute Bag Rapier Loom This machine is suitable for weaving natural fibers(cotton. wool, linen/jute), synthetic fiber plastic wire rope and other kinds of fibers, especially good at industrial fabrics and building cloth. Technical Parameters Width 180cm~850cm Operation speed Maximum weft insertion 250 picks/min, maximum weft insertion rate 750/min Weft yarn count range Cotton 5Ne~80Ne Jute 8Nm~130Nm Man-made fiber 1200dtex~75tex Weft selectionMechanical or electronic selection Dia. Beam flange 800mm Dia. roller 600mm~ 1500mm Shedding device Upper mechanical dobby, or electronic dobby Heald frame 6~16pcs Warp stop Electronic introduction control Weft stop 6 row electrical Motor power 1.5KW~2.2KW Main motor Centralized oil
Single needle unison feed cylinder industrial sewing machine 1.Specifications: Product name Single needle unison feed cylinder industrial sewing machine Model Yd-244-1 Max sewing speed 2, 000spm Max stitch length 7.0mm Needle pole journey 38mm Cylinder dia 50mm Height of presser foot 15mm Fluctuate height od presser foot 2-6mm Needle Dp17 Warrantly 100% guarantee goods Inspect 100% inspection (offer qc report and material certificate) Oem/odm Welcome&available Lead time Depends on order quantity.Normally 7~20 days. Payment terms T/t , l/c, d/p , d/a, etc 2.Eatures: A.Adopts twofold big kettle and shuttle.It can avoid change often, less waste, improve efficiency. B.Compositive material feed setting, smooth sewing, high quality. C.New style adjust setting, adjust onward and backward sewing simply. D.New style double pivot inverse sewing setting, stand against friction, precise after long time usage. 3.Delivery time: Generally 7-20 working days, subject to the order quantity. 4.Superiorty: Our company is professional manufacturer which supply automatic sewing machine and varies kinds of parts for 20 years, with certificates of ce , sgs. Suzhou hela machinery co., ltd. Locates at wujiang district, jiangsu city, near shanghai. We are factory with strict quality control team. Welcome your coming ! 5.Packing and shipping details Standard export wooden box or carton box, according to customer's requirement.
Description : laser liners for bridge saw machines Wave length: 520nm or 660nm Beam color: green or red Out power: 30mw - 50mw(green) or 130 mw(red) Imported laser parts: osram ( green) or mitsubishi ( red ) Modes: high quality laser line Dimensions: f26 x 105mm , f26 x 180mm , f50 x 150mm can be customized Cable length: can be customized Oem and odm are welcomed. Certified: ce, rohs, fda Note: we use parts directly imported from japan or germany, not like many suppliers use the cheap parts. Please don't compare our lasers to others. We can ensure 0 claims from your customers. 1. High quality lasers 2. Stable and 24 hours continuously working lasers 3. Water and dust proof lasers 4. Fast delivery
Lot of 250 SECOND HAND sewing machines composed by lockstitch, overlock, intelock, buttonhole, backtacker, button sewer, zig zag, 3 needles arm sewing, multi needles chainstitch from brands JUKI, BROTHER, JACK, SEWMAQ, BRUCE, KINGTEX, PEGASUS, SIRUBA, KANSAI SPLECIAL, MITSUBISHI, SINGER, YAMATO, DURKOPP, PFAFF, OTHERS. We accept offers for the complete lot.
Decorative Stitches Sewing Machine, ,Auto Upholstery Sewing Machine
Portable Canvas Sewing Machine, ,Handheld Upholstery Sewing Machine
MODEL NO : DLM-5200N BRAND : JUKI TOTAL SET : 18
MODEL NO : LH-3128 BRAND : JUKI TOTAL SET : 49
MODEL NO ;: LH-3168 Brand : JUKI TOTAL SET : 25
