Specification : Test Method Parameters Result Appearance @ 17-23 C : ASTM D 4176 Clear & Bright Clear & Bright Color : ASTM D 1500 1.0 Max 55 69 C Density @ 15 C : ASTM D 4052 760 Min 770.3 Sulphur Content : ASTM D 5453 5 Max 0.5 IBP : 167 FBP : 358 Paraffin Content : Above 90 >90 Pour Point : -15
Specification : Test Method Result Appearance : Visual Clear & Bright Color : ASTM D 1500 L 0.5 Flash Point : ASTM D93 (A) 192 C Density @ 15 C : ASTM D 1298 0.8596 Kinematic Viscosity@ 40 C : ASTM D 455 20.9 Kinematic Viscosity@ 100 C : ASTM D 455 4.17 Viscosity Index : ASTM D 4294 100 Pour Point : ASTM D 2270 160 FBP : ASTM D 97 -100
TYPICAL PROPERTIES Sr. Property Units Specs. Test Methods 1 Kinematic Viscosity @ 100 C cSt 2.47 ASTM D-445 2 Kinematic Viscosity @ 40 C cSt 7.16 ASTM D-445 3 Density @ 15 C Kg/m3 0.8394 ASTM D-7042 4 Flash Point, ,COC, Min. C 122 ASTM D-92 5 Color- Max - 0.5 ASTM D-1500 6 Appearance - C & B Visual 7 Viscosity Index - 203 ASTM D-2270 8 Pour Point C -6 ASTM D-97
1. Characteristics - Appearance Method - Visual Unit - Result - Bright & Clear 2 . Characteristics - Color Method - ASTM D 1500 Unit - ASTM Color Result - 2.5 3 . Characteristics - Density @ 15.6 Method - ASTM D 1298 Unit - G/CM3 Result - 0.868 4 . Characteristics - Kinematic Viscosity @ 100 Method - ASTM D 455 Unit - MM2/S Result - 15.92 5 .Characteristics - Kinematic Viscosity @ 40 Method - ASTM D 455 Unit - M2/S Result - 107.38 6 . Characteristics - Viscosity Index Method - ASTM D 2270 Unit - Result - 158.47 7. Characteristics - Pour Point Method - ASTM D 97 Unit - Result - -6 8 . Characteristics - Flash Point Method - ASTM D 92 Unit - Result - 192
TYPICAL PROPERTIES Sr. Property Units Specs. Test Methods 1 Kinematic Viscosity @ 100 C cSt 2.69 ASTM D-445 2 Kinematic Viscosity @ 40 C cSt 8.72 ASTM D-445 3 Density @ 15 C Kg/m3 0.8396 ASTM D-7042 4 Flash Point, ,COC, Min. C 144 ASTM D-92 5 Color- Max - 1.0 ASTM D-1500 6 Appearance - C & B Visual 7 Viscosity Index - 161 ASTM D-2270 8 Pour Point C -6 ASTM D-97 Base oil SN70, the base stocks has become the most widely used base oil in Middle East and Asia. It is the workhouse ingredient for formulators and blenders of lubricants for passengers and commercial vehicles, as well as industrials applications. Applications :superior quality component for automotive and industrial applications. Safety & Handling: It is stable in ambient conditions, non-corrosive and it can be stored in mild steel containers. The product is practically non-irritating to skin and eyes. Packing: Bulk, IBC Tank, Flexi Tank, New and Re-Conditioned Drums. Features and benefits: Consistency in formulation Market general packages with a range of additives Superior supply chain / delivery logistics
TYPICAL PROPERTIES Sr. Property Units Specs. Test Methods 1 Kinematic Viscosity @ 100 C cSt 0.88 ASTM D-445 2 Kinematic Viscosity @ 40 C cSt 1.93 ASTM D-445 3 Density @ 15 C Gram/cm3 0.8247 ASTM D-4052 4 Flash Point C 78 ASTM D-92 5 Color N.A. L0.5 ASTM D-1500 6 Appearance N.A. Bright & Clear Visual 7 Viscosity Index N.A. 91 ASTM D-2270 8 Pour Point C -36 ASTM D-97 Applications: superior quality component for automotive and industrial applications. Safety & Handling: It is stable in ambient conditions, non-corrosive and it can be stored in mild steel containers. The product is practically non-irritating to skin and eyes. Packing: Bulk, IBC Tank, Flexi Tank, New and Re-Conditioned Drums. Features and benefits: Consistency in formulation Market general packages with a range of additives Superior supply chain / delivery logistics
It is widely used in blending industrial lubricating oils such as those for internal combustion engine, hydraulic facilities, gear, bearing, slideway and metal working, etc. The recommended dosage in oil is 0.5-3.0%. The product is packed in 200 liter metal drum (net weight: 200 kg/drum).
This product is primarily used in blending marine oil and high quality internal combustion engine oil, especially the engine oil for high-sulfur fuel. It is brown liquid. The recommended dosage is 0.5-25.0%. Characteristics Strong acid neutralization capacity Good oil solubility Scatter glial and ash Good anti-rust and anti-foam ability Good thermal stability and hydrolytic stability Excellent performance of water resistance and high-temperature detergency. 200 liter metal drum (net weight: 200 kg/drum).
This gear oil additive package can be used in blending the following grads of API GL-5 vehicle gear oil: SAE90, 80W/90, 85W/90, 85W/140 and the following grads of industrial gear oil: N68, N100, N150, N220, N320, N460. It is brown transparent liquid. Characteristics: Be available for all kinds of base oils The GL-5 80W/90 vehicle gear oils with the dosage of 4.5% G353 have passed the test of CRCL-42, CRCL-33, CRCL-37 and CRCL-60 etc. The 320 heavy load industrial gear oils with the dosage of 1.6% G353 meet the standard of American steel USS-224. 200 liter metal drum (net weight: 200 kg/drum).
This product is a compound of zinc-dithiophosphate, detergent, dispersant and antioxidant. It is primarily used in blending various low-grade and middle-grade lubricant oils. With very low dosage, it can meet the requirements of SB/CB and SC/CC grade oils. The product is brown liquid. The recommended dosage is as below: API grade Single-grade Multi-grade SB/CB 1.8% 2.0% SC/CC 1.8% 2.0% SD/CC 3.5% 3.9% SE/CC 3.5% 3.9% SF/CD 4.0% 4.4%. CHARACTERISTICS Excellent detergency, dispersion and anti-oxidation ability. 200 liter metal drum (net weight: 200 kg/drum)
This product is primarily used for blending cylinder oil for low speed marine engine with outside guide and high quality engine oil, especially environment-friendly internal combustion engine oil. The recommended dosage in oil is 2.0-4.0%. The product is packed in 200 liter metal drum (net weight: 170 kg/drum).
TBN boosters, engine oil additive, gasoline oil additives, diesel (heavy duty) oil additives, engine oil and pcmo additives gear oil additive hydraulic oil additive cutting oil additive package (neat and emulsifier), ATF additive lubricant cascade components: magnesium, origin dispersant antioxidant, ZDDP, pour point depressant polymethacrylate vi improver pib, polyisobutylene defoamers lubricant dyes.
SHUTTERINGOIL Applied by spraying guns, rollers or by brushes prior to pouring aerated concrete and are recommended for use as a concrete mould release agent with the protection of moulds from rust. APPLICATION \' It is used for prevents sticking of formwork to concrete, allowing easy stripping of formwork after harder�±ng of concrete. , BENEFITS It helps easy removal of the shuttering at time of deshuttering the member whereas the oil must be of good condition. It helps in the repetative use of plywood for more project. It make a thin layer between the plywood and concrete which help in reducing of adhesion in the inner surface.
The term "cover block" can have different meanings depending on the context in which it is used. In various fields, a "cover block" refers to different things. Construction and Civil Engineering: In the construction industry, a cover block is a small piece of material, often made of concrete, that is used to maintain a specified distance between the reinforcing steel bars (rebar) and the outer surface of a concrete structure. This distance, known as the "cover," is crucial for the durability and strength of the structure. Cover blocks are placed on the rebar before concrete is poured to ensure the correct spacing and to protect the rebar from corrosion. SPECIFICATION: Shape Square Color Grey Size Available in various sizes and for multiple shapes Design Hollow Keep the details as in the products details.
Hydrax 32/46/ 68/ 100/ 150/ 220 are high quality range of oils formulated using mineral base oils with antifoam, antioxidant, anti-wear mmd antiriist additives, meeting the requirements of most hydraulic systems. APPLICATION For automotive and industrial equipment, with a wide range of viscosities to suit all practical needs requiring high performance hydraulic oil. Beneftts Excellent anti-wear protection, oxidation resistance and thermal stability. Excellent demulsibility facilitates spontaneous separation of the oil from water ingress. Low pour-point enables a wide range of application at different temperatures. The high viscosity index ensures constant flow, low friction loss and good hydraulic efficiency. The antifoam properties and ready release of entrained air prevents operational difficulties with pumps.
SIZE SH (Full) Harrow 6 WEIGHT Less than 1199 gm Greater than 1200 gm PRECISION MAKES ITS PRESENCE KNOWN Enriched with vintage details, the world of ZAP expands with the introduction of a Retro Reserve. ZAP poured excellence into this marvelous bat handcrafted with premium grade English Willow and equipped with exquisite details galore. An iconic big sweet spot with a super spine and a clean flat face for a more extensive profile are only a few sophisticated characteristics of this essential. Laser-etched finishing with a bold iteration of our branding encapsulates the high quality and provenance of the brand. DETAILED FEATURES * Made from Rare Reserved Grade 1 AAA English Cleft * Controlled contour yields sublime aerodynamics * Slight Offset Edge Increases Power To Balance Ratio * Professionally pressed for a generous sweet spot and superb bat speed * Multiple canes, rubberized strip, and semi-oval handle construction for vibration dampening * Mid to low blade swell * Hexa Ultra Grip provides superb control * Angled toe for a comfortable stance * Clean and minimalistic engraved branding * Short Handle * Sustainable and eco-friendly bat poly wrap packaging * Conforms to MCC Law 5 bat regulations * Handmade by a proficient craftsman from Meerut, India * Weight Range: 1100 gm to 1195 gm * Junior size(3,4,5) may have less weight Note - Prices will vary for bulk orders
Product Description Texol ATF Dex VI is a new generation, Premium class, fully synthetic, multi-vehicle ATF suitable for current and all previous types of vehicles needing Dexron type Transmission fluids. The product is made using fully synthetic base oils and carefully selected friction modifiers, anti-wear additives, viscosity index improvers and oxidation inhibitors. Synthetic base oil provides high viscosity index and high operating range besides providing very low pour point. Applications Texol ATF Dex VI is a multi-vehicle ATF recommended for almost all the latest automatic transmissions needing Dexron VI and Mercon LV fluids. It is suitable for Voith, BMW and ZF transmission oils such as 5 speed, 6 speed, 7 speed, 8 speed and 9 speed gear boxes (Lifeguard), besides applications requiring JASO 1A oil. Texol ATF Dex VI is recommended for use in Allison C3, C4 applications, Chrysler ATF +3 and +4; ATF 134, T-IV, Type WS, Mopar 8&9, SP-IV, LT 71141, 3309, 3403, etc. Features and Benefits Good viscosity/temperature characteristics. High thermal stability. Very good low temperature properties. High stability to aging and high chemical resistance. Resistance to wear and good friction characteristics. Excellent corrosion protection. Quality, Specifications and Approvals GM DEX VI JASO 1A Texol's proprietary specifications. Health and Safety Detailed health and safety information for this product is provided in a Material Safety Data Sheet which is available upon request from our Texol sales office.
CPI -1009-68 is formulated with high-quality hydrotreated mineral oil, combined with an excellent performance additive package. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. CPI-1009-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Oxidatively stable Longer system life Low carry-over Improve evaporator efficiency Corrosion protection Enhanced system reliability and reduced down-time Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40 C, cSt ASTM D445 69 Viscosity @ 100 C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 100 Density, g/mL, 20 C ASTM D4052 0.88 Pour Point ( C) ASTM D97 -39 Flash Point, C.O.C., ( C) ASTM D92 226 Fire Point, C.O.C., ( C) ASTM D92 246 "
CPI-1009-68 is formulated with high quality hydrotreated mineral oil, combined with an excellent performance additive package. This lubricant features enhanced oxidation stability and pour point depressant, allowing it to operate over a wide range of temperatures. The oil has low volatility, enabling decreased maintenance and significantly reduced lubricant consumption. CPI-1009-68 is particularly suited for use in ammonia compressors with evaporator temps greater than -39C. Applications and Compressor Type Ammonia compressors Process gas rotary screw Process gas reciprocating compressors Features and Benefits Oxidatively stable Longer system life Low carry-over Improve evaporator efficiency Corrosion protection Enhanced system reliability and reduced downtime Low pour point Easier removal of the oil Low volatility Reduced maintenance, reduced top-up Test Procedure ASTM Method Typical Viscosity @ 40C, cSt ASTM D445 69 Viscosity @ 100C, cSt ASTM D445 9.1 Viscosity Index ASTM D2270 100 Density, g/mL, 20C ASTM D4052 0.88 Pour Point (C) ASTM D97 -39 Flash Point, C.O.C., (C) ASTM D92 226 Fire Point, C.O.C., (C) ASTM D92 246
"The CPI-1005-68 product is a custom-blended, highly refined, dewaxed, chemically inert lubricant. Silicone additions act as a lubricity improver, defoamant, pour point depressant and help protect the metal surfaces against corrosion. Widely used for applications where the lubricant is subjected to harsh chemical environments. Contains an additive compatible with sour hydrocarbon (H2S) gas systems. APPLICATIONS -- Lubricant/coolant for process and gas rotary screw compressors. -- Lubricant/coolant for process applications. Especially effective in combating corrosion and promoting long life in sour hydrocarbon gas compressors. Test Procedure CPI-1005-68 Viscosity @ 40C, cSt, ASTM D445 69 Viscosity @ 100C, cSt 9.1 Viscosity @ 100F, SUS 357 Viscosity @ 210F, SUS 56.5 Viscosity Index, ASTM D2270 100 Density, lb/gal, 60F, ASTM D4052 7.4 Pour Point F (C), ASTM D97 -40 (-40) Flash Point, C.O.C., F (C), ASTM D92 440 (226) Fire Point, C.O.C., F (C), ASTM D92 475 (246) Specific Gravity, ASTM D4052 0.89 These are typical values and are not intended for use in preparing specifications. "