Petcoke, also known as petroleum coke, is a carbon-rich solid material that is produced during the refining of crude oil. The specifications of petcoke can vary depending on the type and source of crude oil, as well as the processing method used to produce it. However, here are some of the general specifications for petcoke: - Carbon content: Typically ranges from 85% to 95% - Sulfur content: Can range from less than 1% to over 7% - Moisture content: Typically less than 5% - Ash content: Can range from less than 1% to over 10% - Volatile matter: Can range from less than 5% to over 20% - Size: Can range from a fine powder to large chunks Petcoke is primarily used as a fuel source in industrial processes, such as cement manufacturing, power generation, and steel production. It is a cheaper alternative to coal, and its high carbon content makes it an effective fuel for energy-intensive processes. However, its high sulfur content can contribute to air pollution and acid rain, so it is often subject to emissions regulations. Petcoke is also used in the production of anodes for the aluminum smelting industry, as well as in the production of graphite electrodes for the steel industry. In addition, it is sometimes used as a source of carbon in the production of certain chemicals and materials.
Petroleum products, en590 10ppm diesel, en590 diesel, jet a1, aviation fuel, jet fuel, d2 diesel, d6 diesel, petroleum coke, crude oil.Trade consultancy & representation
GREEN PET COKE Payment mode - 100% LC For price and specifications please email LOI with BCL. We can supply Petcoke from Russia. We deal in fuel grade , anode grade essar petcoke in large quantity. Russian Green Pet Coke Sulphur from 0.2 -0.6% Max and Fuel Grade Petrol Coke with Sulphur from 2.5 to 6% Max We can produce per customer required Spec's General Spec's attached for Each.
Moisture Content (as received) - 6.0 Moisture Content (after initial drying) - 0.7 Ash (after initial drying) - 0.3 Volatile Matter (after initial drying) - 10.9 Fixed Carbon (Calculated) - 88.1 Density-Vibrated Bulk(after initial dry) - 0.776 Total Sulfur (after initial drying) - 5.6 Hard Grove Grind ability Index (HGI) - 56 Gross Calorific Value (GCV) - 8390
Our company is a direct authorized mandate to the major refinery of Petroleum and Petrochemical products, supplier and sellers such as (ROSNEFT, GAZPROM NEFTGAS, SURGURTNEFT) in the Russian Federation. ENERGY RESOURCE SERVICE, hereby with full corporate and legal authority and responsibility, confirm availability of below listed RUSSIAN PETROLEUM and PETROCHEMICAL PRODUCTS directly from the refinery for Immediate sales to buyers under the specified terms and conditions that will be suitable for both parties with affordable prices both on CIF and FOB basis. All supply is Guaranteed to meet the standard specifications and to pass the stringent requirements of SGS or Equivalent in compliance with ICC international regulations. The products available for sale are as follows: D2 Diesel Gasoil, Virgin Fuel Oil D6, AGO, Mazut- M100 75 and 99, JP54, JET A1, Gasoline, Russian Crude Oil (REBCO / ESPO) LNG, LPG, Gas Oil EN590, Coal, Fertilizers, Bitumen from our Refinery allocation to Potential & interested Buyers / Re-sellers to any part of the world.
As Per Standard Specifications of Pet Coke
Total Moisture as receive basis, DSTU ISO 579 2002 4,2 Ash dry basis GOST 11022 95, ISO 1171 97 12,1 Total Sulfur dry basis GOST 2059 95, ISO 351 84 0,58 Volatile Matter dry ash free basi GOST 6382 91,ISO 562 81 0,2 Net Calorific Value as receive basis, kcalkg DSTU ISO 1928 2006 6670 Gross Calorific Value dry ash free basis, kcal kg 7983 Phosphorus, P', DSTU 253794 GOST 1932 93 ISO 622 81 0,042 Mechanical strength MA DSTU 2206 93 GOST 5953 93 ISO 556 1980 65,5 Mechanical strength M10, 7,7 Reactivity of coke, CRI, DSTU 4703 2006 27,4 Coke strength after reaction, CSR, 59,8
Consultancy in the oil and gas field: en590, jeta1, d2, petroleum coke and all other petroleum derivatives. only serious inquiries will be entertained..
Metallurgical coke is a carbon material resulting from the manufactured purification of multifarious blends of Australian coal.LAMC is Green fuel and 100% Eco Freindly Fuel. Coke is made by destructive distillation of a blend of selected Bituminous coals (called Coking coal or Metallurgical coal) in special high temperature ovens in the absence of oxygen until a greater part of the volatile matter is driven off. The resulting product, COKE, consists principally of Carbon with sizes ranging from basketballs (foundry coke) to fine powder (coke breeze). Coke is primarily used to smelt iron ore and other bearing materials in blast furnaces, acting both as a source of heat and as a chemical reducing agent to produce pig iron or hot metal. We currently operates non polluting non recovery type coke ovens . The raw material requirement is met by importing prime coking coal of Australian origin. The distinct features of our coke are as under: Meticulous coking cycle and relatively higher oven temperatures results in superior coke quality. Complete combustion of coking coals resulting in almost negligible levels of pollution. Advance In-house lab for complete analysis and to rectify minute changes in chemical specifications. We are planning to develop new trends as far as improved coke quality is concerned. Completely RCC coal & coke yard which ensures that the coke quality is maintained. Exclusive mechanized machines for exact sizing and screening of coke. Excellent infrastructure facilities like steel duct & stack and big size ovens which increases the efficiency as well as the quality of coke. We have expertise in producing different coke qualities for the requirements of blast furnaces, foundries, Ferro alloys. We are also diversifying into different activities and moving towards an eco friendly energy by setting up a power plant with the stack emissions of our coke oven. Low Ash Metallurgical Coke (Met Coke) is required for metallurgical and chemical industries and is used as the primary fuel where high temperature and uniform heating is required. The industrial consumers of LAMC include integrated steel plants, industry/foundries producing Ferro Alloys, Pig Iron, Engineering Goods, Chemicals, Soda Ash,Cement Industries,Zinc units and also used in Tea and hotel restaurants & etc.
Low sulphur carbon additive 1.Our style no.: t9805 2.Type:graphitized petroleum coke 3.Fixed carbon content : 161;y98.5% Sulphur content : 0.05% Ash content : 0.50% Volatile content : 0.50% 4.Particle size : 1-5mm 5.Feature:first-class quality, low price, timely delivery and our best service.
High C Carbon Additive Our style No.:T9850 Carbon content: Y 98.5% Sulphur content: ¨0.50% Ash content: ¨0.50% Volatile: ¨0.80%. Particle size: 1 to 5mm, as your requirments.
Petroleum coke
Both blast furnace coke and foundry coke are made by baking a blend of selected coking coals in certain high temperature without contact with air until almost all of the volatile matter is driven off. The resulting product, coke, consists principally of carbon, as listed in above table. By-products are crude coal tar, light oils, and ammonia, etc. Generally speaking, chemistry, size, and strength have been considered the most important properties for use in the blast furnace. Other important factors are coke reactivity and csr (coke strength after reactivity), which deal with the amount and size of pores and walls, porosity, and density. Carbon textures and microstructure are two main factors that affect the reactivity, stability, and the coke strength after reaction. In ton bag or as your request
JET FUEL OIL (JP54/JPA1), D6, DIESEL GAS, VIRGIN FUEL OIL D2, LIQUEFIED PETROLEUM GAS (LPG), LIQUEFIED NATURAL GAS (LNG), FUEL OIL OCTANE, LIGHT CYCLE OIL, Petroleum Coke