D2 Gas Oil - Russian Diesel Gas Oil
EN590 Gas Oil
Diesel Gas Oil D2 GOST 305-8250
YYL Vertical Oil Gas Thermal Oil Heater YYL Vertical oil/gas fired thermal oil heaters use oil or gas as fuel, the heat transfer oils is heated in the boiler furnace first, then the thermal oil will flow in the closed loop pipe to the heated equipment and then return to the thermal oil heater again, in this way, the heated object can reach a high temperature (Max. 320?) with indirect heating. It is especially suitable for industies which are flames prohibited Bidragon Oil/Gas fired thermal oil heater is high efficient compared with other heating systems. 1. Multi-passes thermal conductive structure to improve the thermal efficiency greatly 2. Horizental tubes can reduce the heat loss. 3. Thicker insulated layer to reduce heat loss by thermal radiation. 4. Intelligent control system makes biomass fired thermal oil boiler operation easier and more simple. Features of Oil/Gas Fired Thermal Oil Heaters 1. High Temperature This Oil/Gas fired thermal oil heaters can reach 320? at low pressure. 2. Easy Operation User friendly designed control system, easy to operate. 3. Low Investment Compared with steam boiler and hot water boiler, thermal oil boiler is perfect to give user high temperature in a much safer way. It cost little in maintenance and daily process. 4. PLC Intelligent Control System The PLC control system of thermal oil heaters is suitable for high temperature and high humidity environment of long-term operation.
Quantity: Min 50,000 MT & Max 500,000,000 MT SPOT & Annual Contract SPOT & Annual Contract Condition of Delivery: CIF Price: $170.00 USD Gross $160.00 USD Net Quantity: Min 50,000 MT & Max 500,000,000 MT SPOT & Annual Contract SPOT & Annual Contract Condition of Delivery: FOB Price: $160.00 USD Gross $150.00 USD NET. Commission: USD 2 Buyer side/USD 2 Seller side
We, ALMA INTERNATIONAL TRADING FZE, are able to supply Automotive Gas Oil (AGO), as below: AUTOMOTIVE GAS OIL (AGO) SHIPMENT: CIF FUJAHIRA AND WORLDWILDE /FOB ROTTERDAM HUSTON ORIGIN: RUSSIAN or EUROPEAN PRICE QUOTE: ON REQUEST BY EMAIL ONLY MIN QTY: 20,000.00 MT MAX QTY: 500,000.00 MT Please read carefully before making a request. Information on our company policy regarding quotes. We at Alma International Trading require a Letter of Intent (Loi) from the end purchaser before we can provide a detailed price quote. Once we receive the Loi, our team will promptly review it and provide you with an accurate and comprehensive price quote. We do not respond to emails and phone calls to receive information without a written request with the final buyer's details. Important Notice Regarding False Documents If the selling company receives any false documents from the buyer or their intermediaries, we will take swift and decisive action. It is our duty to ensure the integrity and legality of all transactions we engage in. In the event that false documents are presented, we will not hesitate to report the matter to the local police. Furthermore, we will elevate the issue to INTERPOL and the International Chamber of Commerce. Our aim is to protect the interests of all parties involved and maintain a safe and transparent business environment. We expect all transactions to be conducted in an honest and professional manner. Thank you for your attention to this matter. Best regards, ALMA International Trading FZE LLC
D2 Diesel Gas Oil is offered by our end sellers considering the needs of diverse industrial sectors. We provide D2 Diesel Gas Oil in different grades. Our D2 Diesel Gas Oil is mainly used to run several industrial as well as commercial automobiles. We take up bulk orders of D2 Diesel Gas Oil and deliver it timely. Our D2 Diesel Gas Oil is available at competitive rates. Minimum ordered quantity of our D2 Diesel Gas Oil should be 50.000MT Grade Available: D2 DIESEL GAS OIL L-0.2-62 GOST 305-82 OFFICIAL GUARANTEED SPECIFICATION FOR RUSSIAN ORIGIN GAS OIL 0,2/62 GOST 305 â?? 82 RUSSIAN GAS OIL D2 GOST 305Ã?Â82 COMPONENT INIT MIN MAX Density@ 20 deg C Kg / m3 0.870 Colour 1.0 2.0 Flash point, PMCC Deg C (C) 57 66 Kinematic viscosity @20 deg C C ST 3.0 6.0 Pour point Deg C (C) (*) 10.0 Cloud point Deg C (C) (*) 5.0 Mercaptan Sulphur 0.01 Acidity, mg / 1000 cm3 5 Iodine number g/100g 6 Ash %wt 0.01 Total Sulphur %wt 0.01 0.02 Copper corrosion 3hrs@50 deg C (Typical) 1 A CCR on 10% Residues %wt 0.20 Cetane Index 45 Distillation range: - 50% Recovered Volume deg C (C) 280 - Ã?Â90% Recovered Volume deg C (C) 350 - Bacteria MBC Fibre / it 500 - Bacteria CFU Fibre / it 1000 (*) Summer from March to October (PP 5.0 degrees C) Summer from March to October (CP 0.0 degrees C) Winter from November to February (PP 10.0 degrees C) Winter from November to February (CP 5.0 degrees C) The product is guaranteed by Seller not to contain bacteria and other living organism contamination above normal level (1000 CFU/l).
Selling gas oil Heavy origin iran FOB, CIF
Appearance - Clear & Bright Delivery - CIF, TTO Payment Terms - SBLC, DLC
Product INFORMATION ----------------------------------------------------------------------------------- Product: AUTOMOTIVE GAS OIL (AGO) Origin: RUSIA, KAZAKHSTAN, CHINA Delivery Terms: CIF ANY SAFE WORLD PORT (ASWP) Trail Quantity: 30,000 METRIC TONS Price: USD$450 PER METRIC TON Payment terms: DLC(MT700), SBLC(MT760), MT103(TT WIRING) TRANSFER SPECIFICATIONS ------------------------------------------------------------------------------------- PARAMETER TEST METHOD IP/ASTM LIMITS Specific Gravity 15/15 deg C 160 / D1298 0.820min, 0.870 max Distillation: Recovered @ 357 deg C (% Vol. EBP deg.) 123 / D86 90 min, 385 max Color (ASTM) D 150000 3 max Flash Point (deg. C) 34 / D93 66 Total Sulphur ( % wt) x-ray 0.3 max Copper Corrosion (3 hr @ 100 deg. C) 154 / D130 No. 1 Strip max Kinematic Viscosity @ 38 deg. C (Cst) 71 / D445 1.6 5.5 Cloud Point (deg. C) 219 / D2500 4.4 max Carbon residue (% wt.) D189 0.15 max Acidity (inorganic acid) Nil Total Acid Number (mg KOH/gm) 139 / D974 0.50 max Ash Content (% wt.) 4 / D482 0.01 max Sediment (% wt.) 53 / D473 0.01 max Water by Distillation 74 / D95 0.05% max Diesel Index IP 21 47 min
AUTOMOTIVE GAS OIL (AGO) Quantity minimum: 10,000 MT Trial Shipment Maximum: 500,000 MT Monthly
Automotive Gas Oil
We can cater Gas Oil 10 ppm from two sources: - from ADNOC, with port of Loading at Hamriyah and Ruwais. We can cater quantities upto 150,000 MT per month. Pricing will be based on Arab Platts. - from Russia (EN590), with port of loading from non-sanctioned ports. We can cater quantities upto 100,000 MT per month. Pricing will be at a discount from Med platts. Serious Buyers only.
MGO 10/500ppm able to deliver 9300 Metrix ton . Ron 95 Petrol able to deliver 9300 Metrix ton Payment Term - CIA/LC
Gas Oil (Diesel) : Characteristics : Appearance,color, Max ,density At 15 ,c, Kg / M3, Max.,acidity (inorganic Acid),total Acid Number, Mgkoh/g Max Distillation . - Evaporation At 357,c, % By Volume, Min - Final Boiling Point ,c (max) - Flash Point (pensky Martens), ,c, Min Requirements : Clear & Bright,3.0,830 - 870,Nil,0.5,90 385 Test Method : - Visual - ASTM D1500 - ASTM D4052 - ASTM D974 - ASTM D974 - ASTM D95
HSD2 GAS OIL L-0.2-62 GOST 305-82 AGO (AUTOMATIVE GAS OIL) Minimum Quantity: 100,000MT â?? 500,000MT â?? Per Month FOB Price: Gross $ 340 - Net $ 330. /CIF Price: Gross $ 380- Net $ 370 Quality: SGS or similar inspection Commissions: $5 Buy side (open) Seller side $5 (closed) Payment Term: MT103 Loading Port: Vladivostok / Novorossiysk
DESIEL GAS OIL ULTRA â?? LOW SULPHUR DIESEL 50 PPM/ EN590 Minimum Quantity: 100,000MT â?? 500,000MT â?? Per Month FOB Price: Gross: $ 300- Net $ 290 /CIF Price: Gross $ 340- Net $ 330 Quality: SGS or similar inspection Commissions: $5 Buy side (open) Seller side $5 (closed) Payment Term: MT103 Loading Port: Vladivostok / Novorossiysk
Palm Oil
3DP Series Oil/Gas Mixture pumps This new generation of oil/gas mixture pumps is designed and built to handle media of either in liquid state or gaseous form, and performs simultaneously both functions of a pump and that of a compressor. 3DP70 has become the latest state of art transfer system for both inland and off shore oil/gas producing operations around the world. With its have high internal compressing power, high throughput, high compression ratio, powerful oil/gas transfer capability and highly effective energy saving characteristics. Capacity: 32-170 m3/hr Suction Pressure: 0.2-0.5 Mpa Discharge Pressure: 1.0-3.2 Mpa Efficiency: >=85% Compression Ratio: 6~8 Gas Content: 0-100% Oil/Water Content: 0-100%
The diaphragm compressor booster is a special structure of the volume-type compressor with high compression ratio, good leak tightness, compressed gas without lubricating oil and other solid impurities contaminated features, So it's suitable for high purity compression, rare, valuable, inflammable, explosive, toxic, harmful, corrosive, and high pressure gas. Note: 1, In addition on the above-mentioned products we can also provide products used for compression of various gas and other specifications and models upon users' special requirement. 2, Clients' inquiries should contain related parameters A. The gas compression medium B. The flow rate: _____Nm3/hr C. Inlet pressure: _____ Bar D. Discharge pressure: _____ Bar E. Inlet temperature F. Cooling water temperature as well as other technical requirement. Diaphragm Compressor Features of products: 1. Compressed gas is completely sealed from outside, which provides high sealing performance; the compressor of high sealing performance is specially suitable for use to compress gas in radioactive area of nuclear power plant and highly poisonous gas; 2. Owing to nonexistence of lubricant in diaphragm cavity, namely it is impossible for gas to contact any lubricant, there is no problem to compress to higher pressure the dangerous gas and oxygen, fluorinated gas and chlorine, etc; 3. Compared to the compressors of other types, gas will not be polluted by the particles produced due to abrasion of sliding parts, therefore, it is absolutely ensured the same purity of compressed gas as that of the gas when entering compressor. Therefore, it is suitable for high purity gas such as electronic gas, breathing gas and hydrogen used in fuel cell technology; 4. High compression rate. As a result of optimized design of diaphragm cavity curve, maximum deformation of diaphragm under allowable stress is ensured to obtain maximum volume efficiency; 5. Pressure lubrication is adopted for compressor, so the moving parts of compressor have excellent lubrication of hydraulic oil, which minimizes the abrasion of moving parts and reduce maintenance rate; 6. Pressure oil supplement is adopted for compressor, namely, the lubricant, after coarse filtering, is pressurized by passing through gear pump for fine filtering, then enter slippage pump, this kind of pressurized lubricating oil can prevent the occurrence of non-oiling due to the air existing in slippage pump; at the same time it can prevent small particles from entering slippage pump to damage plunger, thus lengthening the service life of slippage pump.
