Type: Outboard Motor Year: Current Model: F40 HP Jet Drive Model Number: F40JEHA Series: Four Stroke Jet Drive HP: 40 Engine Type: 3 Cylinder Displacement: 45.6 ci (747 cc) Borex Stroke: 65 x 75 mm (2.56 x 2.95in) Prop Shaft Horsepower: 30 @ 5500 RPM Compression Ratio: 9.4 RPM Range: 5000-6000 Fuel Induction System: EFI (SOHC) Fuel Type: Unleaded gasoline (minimum pump octane 87) Exhaust: Thru prop Ignition System: TCI Microcomputer CARB Rating: 3-Star Alternator Outputat WOT: 16A Starting System: Electric Lubrication: Wet Sump Oil Capacity: 2.1 quarts Recommended Engine Oil: Yamalube 4M Gear Ratio: Direct Drive Control Type: Tiller Handle Trolling Throttle Adjustment: N/A Cooling: Water, Thermostatic Control Gear Shift: F-N-R Command Link System: No Enhanced Ultimate Corrosion Protection System UCP: Standard Feature Power Trim and Tilt: No Shaft Length: 20 inch Gearcase Rotation: Jet Drive Propeller: Jet Drive Tiller Handle Kit: Optional Freshwater Flush: Yes
Rice, sugar, tuna can, used car parts, engines and beans chilling papar, a4 paper, canned tuna, jute bags, used engine, nitrile powder free medical gloves, sugar, rice, sugar/liquid glucose, frozen whole rabbit heads, sunflower oil, msg 99% monosodium glutamate.
Specifications Engine Type 16-Valve DOHC Direct-Action In-line 4 Displacement 2670 cc Bore x Stroke 94x6.2 mm Recommended Max RPM 5000-6000 Lubrication System Wet Sump Fuel Management EFI Ignition TCI Starter System Electric Alternator Output 12V - 37A with Rectifier Regulator Operation Method Remote Control Trim & Tilt Method Power Trim & Tilt Digital Network Gauges with Fuel Management Standard Gear Ratio 2.00:1 OEDA Emission Rating ???? Scavenging Double Overhead Camshaft Fuel Management EFI Oil Pan Capacity (litres) 5.8 Spark Plug LFR5A-11 Gear Shift F-N-R Exhaust system Through Propeller Hub (Jet) Prop. Engagement Spline
Specifications Engine Type 16-Valve DOHC Direct-Action In-line 4 Displacement 2670 cc Bore x Stroke 94x6.2 mm Recommended Max RPM 5000-6000 Lubrication System Wet Sump Fuel Management EFI Ignition TCI Starter System Electric Alternator Output 12V - 37A with Rectifier Regulator Operation Method Remote Control Trim & Tilt Method Power Trim & Tilt Digital Network Gauges with Fuel Management Standard Gear Ratio 2.00:1 OEDA Emission Rating ???? Scavenging Double Overhead Camshaft Fuel Management EFI Oil Pan Capacity (litres) 5.8 Spark Plug LFR5A-11 Gear Shift F-N-R Exhaust system Through Propeller Hub (Jet) Prop. Engagement Spline
per annum. Price for volume over the MoQ 30 Million boxes is negotiable. Payment by L/C 100% at sight, transferable, irrevocable and confirmed. Product Name: Disposable Vinyl/Nitrile Blended Examination Gloves Single use, non-sterile, no measuring, Latex free Sizes: XS, M, L. XL. XXL Color: Blue, Green Structure: 5 fingers, beaded cuff for easy donning, ambidextrous Surface: Smooth The Vinyl/Nitrile Blended glove is a new type of synthetic glove that was developed based on the vinyl glove production technology. Its material is compounded with PVC paste and Nitrile latex, so the finished production has the advantage of both PVC and Nitrile gloves. Comparing with the vinyl gloves, the Vinyl/Nitrile Blended glove can better satisfy the users demands, it feels softer, more flexible and more comfortable when wearing. Intended purpose: The examination glove is disposable non-sterile device intended for medical purpose that is worn on the examinerâ??s hand or finger to prevent contamination between patient and examiner. Medical Device Quality Management System EN ISO 13485 Certificate, ISO 9001 Quality Management System Certificate - 2 FDA FDA Registration Information - 510K Product 510K Biocompatibility Test Report EU CE Certificate (DOC, Technical Documentation Review Report )
Rosa Damascena Essential oil 100% pure, natural and fresh. Steam distilled from pink roses has a clear yellow color, powerful sweet fragrance, every batch produced from a single plant clone, organic 100% pure natural product with therapeutic grade. Price depends on quantity, oil analysis and samples available after request. Every step of the process from plantation to harvest is closely monitored by field expert scientists ensuring that all of our production meets all international quality standards and regulations. Our distillation mills are equipped with the latest technology ensuring top quality in every drop. All of our essential oils are maintained in special conditions in a controlled environment where experienced personnel constantly monitor the temperature and humidity of the storage. Every production is made from a single plant clone and has a specific batch number assigned to it for optimal monitoring. At the center of our activities is our love for nature and natural products, which guides us to handle everything with care to our planet, offering our clients pure and Eco friendly products. Our farms and distillation mills are located in Greece and Bulgaria while our sales and management headquarters are based in South Australia. By choosing us you will enjoy worldwide shipping, great customer service and environmental friendly top quality natural products. We value every one of our customers individually ensuring personal contact with every interaction and are proud that all of our clients that started working with us stayed with us forming a long lasting relationship. We provide every service related to essential oils from 5ml to 1000kg, shipping anywhere in the world, offering private labeling and bulk sales. Only UN approved packaging is used for our products ensuring top quality and safety and every step of the process is done by the book.
Product Name: Disposable Vinyl/Nitrile Blend Examination Gloves One-time use, no sterilization, no latex Single use, non-sterile, Latex free Model: S, M, L, XL Sizes: S, M, L, XL Color: blue, green, black, etc. Color: Blue, Green, Black etc. Structure: 5 fingers, with curling, regardless of left and right hands Structure: 5 fingers, beaded cuff for easy donning, ambidextrous Surface type: smooth surface Surface: Smooth Features : PVC/nitrile synthetic gloves are made of PVC resin and nitrile latex material. The product has PVC and The double advantage of nitrile gloves. The Vinyl/Nitrile Blend gloves is compounded with PVC paste and Nitrile latex, and the finished product has the advantage of both PVC and Nitrile glove. The donning feeling is better than vinyl gloves. Much softer than vinyl gloves Sturdy, wearable, longer wearing time than nitrile gloves The wearing time is longer than nitrile gloves. Has good wet hand wearability, easier to wear than nitrile and PVC gloves Easy donning with wet hands and easy donning than nitrile &vinyl gloves. PU coating, free of protein, effectively reduces the risk of allergies PU coating, with no protein in it, allergy risk is reduced effectively. Has better protection, has better acid resistance, alkali resistance and oil resistance Better protection, good resistance of acid, alkali and oil. Better cost-performance
Ferrous: hms 1/2, used rails r50, r65. used drill pipes. nonferrous :copper cathodes, aluminium ingots a7, lead ingots, zinc ingots. minerals : iron ore, copper ore concentrate, lead ore concentrate, zinc ore concentrate, manganese ore, nickel ore. metallurgical coke, petroleum coke. steam coal. agriculture food: all grade rice, wheat, soya beans, sunflower oil, virgin olive oil. petroleum products : diesel fuel, gasoil, jet fuel ai, jet fuel 54. en500, d2, d6..
Origin: Indonesia. Available in CIF or FOB terms. Shortening is a type of solid fat used in baking to create a tender and flaky texture in baked goods, often made from palm oil.
Origin: Indonesia. Available in CIF or FOB terms. CP 10 is a type of refined palm oil commonly used in cooking and frying, known for its high stability and longer shelf life.
TECHNICAL SPECIFICATION DATA SHEET: PROPERTY TEST ASTM TEST METHOD API @ 60 F 30- 45 ASTM D-1298 Sulfur (wt%) max 0.8 ASTM D-4294 BS &W % max 2.0 Paraffins (vol. %) 40 -70 ASTM D-2789M Naphthenes (vol. %) > 25 ASTM D-2789M Organic Chloride(ppm) < 1.0 ASTM D-4929 Organic Nitrogen max (ppm) 500 ASTM D-4629 Microcarbon Residue (MCRT) 2.0 Max ASTM D-4530 Light ends C2 â?? iC5 5 % Max Total Acid Number, mg KOH 0.8 ASTM D-664 Metals by ICP ASTM D-5708 Vanadium
BASE Oil-SN 60, 70, 150, 300, 500, 600, 650 & BS 150.
Technical Data Sheet Property Average Value Gravity@15.6oc : 0.859 Max SPI: 33.45 Sulphur: 1.2-1.5 Max Water & Sediment Content: 0.2 Max Water Content: 0.1 Max Salt Content: 8 Max Carbon Residue: 4 Max Reid Vapour Pressure: 0 Pour Point: 0.35 Ash: 0 Asphalt : 1 Max ASTM Stabilized Gravity: Degree 3.7 Recovery @50oc: 0.8 Min @100oc: 8 @200oc: 28 @250oc: 37 @300oc: 47 Total Distillate: 47 Total Residue: 2.5Max
MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max
Base oil sn60, 70, 100, 150, 350, 400, 500, 550, 600, 650; jet fuel a1, jp54, crude oil, bitumen 50,60/70, 90/100 & all grades of bitumen, used cooking oil, transformer oil, industrial oil, all types of grease, lng/lpg, used motor or engine oil, all types of motor oil, lubricants, additives and types of petroleum products.
Please study used Mercdes Benz Tractor (left Handle - American style) Mercedes Actros 2644LS Production year 2004 Engine:OM501LA Tractor:6x2 Color: white & Auto Transmission Mercedes Actros 2644LS Production year 2008 Engine:OM501LA Tractor:6x2 Color: Blue & Auto Transmission Study it in your market for quoting
We have Used Scania Bogie set (Tandem) RBP 735 RPB 730 Volvo Tandem Study it in your market.
Used Mercedes UNIMOG We have 2units of this model If you have used it for a while at a ski resort, Everything is in excellent condition. Handle is left Whole truck weight 8,730kg Loading capacity 3,000kg
Available products: CRUDE OIL, JET A1/JP54, D2, D6, EN590, DIESEL 10PPM & 50PPM, MAZUT M100, Copper, Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure. For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need. We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals. Send us LOI so that we can start processing the order. If you have any questions please do not hesitate to contact us! Available products: JET A1 JET JP54 Diesel D2, EN590 10 PPM, Diesel D6, Diesel 10PPM & 50 PPM. Mazut M100 Bitumen Crude Oil Copper
Our roller coatings provide a stable grip, are long-lasting, and resistant to damage from high temperatures, abrasion, oil, and chemicals. The majority of coverings are available with a self-adhesive backing that is high-heat resistant, guaranteeing a high level of adhesion to the roller. In addition, we provide non-adhesive roller covering tape with a selection of very fine specialty contact adhesives. Depending on the purpose, a variety of materials are used to create our roller covers.
