Features of pneumatic marine fender (1) High energy absorption The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. Fenders use compressed air as the buffer medium to absorb ship impact energy and have good elasticity. (2) Ultra low back pressure The inside air of pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure. (3) Inclined contact, good adaptability Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of pneumatic fender, its adaptability is much higher than other fender. (4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level Pneumatic marine fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving. (5) Both end fender flange produced by special materials, acid and alkali resistance, oxidation resistance, not easy to rust. (6)Florescence pneumatic marine fenders install easily and widely used in a variety of ships, large dock and a large variety of tidal dock. Application of pneumatic marine fender Pneumatic marine fenders are suitable for many applications including: *Tankers, Gas Carriers and Bulk Cargo Ships; *Fast ferries and aluminum hulled vessels; *Temporary of permanent installations; *Rapid response and emergency fendering; *As stand-off fenders to realign ships with shore facilities.
NGK NS11A NOx Sensor Head Repair Kit for SCR System Genuine NGK parts Universal NOx Sensor Probe Repair Kit Part number: NS11A Type: Series 2.8 NGK NS11A NOx Sensor Head Function: 1.Testing and measuring oxygen concentration in the gas 2.Testing the decomposition of the nitrogen dioxide: NO2 2NO + O2, complete NO2 NO conversion Nitrogen oxide Testing Products MORE DETAILS OF NS11A Nox Sensor Head: NGK NS11A NOx Sensor Head Repair Kit For SCR System-Sukorun NGK NS11A NOx Sensor Head Repair Kit For SCR System-Sukorun NGK NS11A NOx Sensor Head Repair Kit For SCR System-Sukorun ALWAYS KEEP PRODUCTS IN STOCK NGK NS11A NOx Sensor Head Repair Kit For SCR System-Sukorun NS11A NOx sensor head in stock NGK NS11A NOx Sensor Head Repair Kit For SCR System-Sukorun WHAT CAN WE OFFER: 1.Fast delivery. 2.Professional in auto parts area. 3.Excellent quality and great price. 4. Flexible and convenient logistic service. 5. Sample order and small order are accepted. 6. We will reply to you for your inquiry in 24 hours. Specifications 1. Applicable for all types of NOx Sensor 2. With good after-sale service
Hdpe siphon pipe Siphon rainwater drainage system is a new technology which is developed very fast in europe, american, japan, south-american, asia and africa countries. It is a more scientific and advanced technology, can be used on big construction building like factory, workshop, warehouse and public building. The inner drainage system has obviously advantages comparing with the traditional gravity current drainage system. Hdpe siphon pipe, hdpe drainage pipe, hdpe corrugated pipe, hdpe trenchless pipe, hdpe water supply pipe, hdpe gshp pipe, hdpe pipe fittings factory. Specification Straight series Nominal diameters16s25 Dn (mm)tolerance (mm)wall thickness (mm)pn (mpa)wall thickness (mm)pn (mpa) 32+0.33.01.3 40+0.43.01.1 50+0.53.00.8 63+0.63.00.7 75+0.73.00.5 90+0.83.50.5 110+0.84.20.5 125+0.94.80.5 160+1.06.20.5 200+1.16.20.47.70.5 250+1.37.80.49.60.5 315+1.59.80.412.10.5 Coil series Nominal diameters16 Length: m/roll Dn (mm)tolerance (mm)wall thickness (mm)pn (mpa) 32+1.43.01.350, 100, 200, 300, 500 40+1.53.01.1 50+1.63.00.850, 100, 200 63+1.73.00.750, 100 Properties Projectrequirement Longitudinal reversion(110) 3% no delamination, cracking and blistering Mfr (5kg, 190)/(g/10min)0.2 1.1 The mfr difference between the raw material particles should not exceed 0.2 Oxidation induction time (200/min) 20 Hydrostatic strength test (80, 165h, 4.6mpa)no broken, no leakage Ring stiffness (kn/m3) Only for the pipes with a bd representssr 4 Combustion toxicity index1 System composition The siphon drainage system is mainly composed of rainwater head, fastening systems, hdpe pipe and the corresponding design Software. Tengyuan can supply municipal engineering pipe, dredging engineering pipe, hdpe gas pipe, power engineering pipe, mining pipe and agriculture irrigation pipe, etc. Integrity is the foundation of us, as well as the guarantee for enterprise's sustainable development.
Product Description Thermoforming packaging machine is a bag making, filling and sealing multifunctional machine. Maximum durability. In response to the High performance multi-purpose machines. With a long list of specific devices developed to meet the needs of each product to be packaged, production requirements and pack specifications, these machine models can respond to all type of packaging needs. Function Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Electronic or metal parts: to avoid dampness and prevent rust Extend product shelf life Nice appearance Available for special applications Application Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicine...etc. Optioal Date injecting, date thermal printing, labeling, Water cooling machine Vacuum,Gas flushing,MAP(modified atmosphere packaging) Metal Detector Different brands pumps(Chinese or Germany Busch) Conveyor Multiheads speed weigher different size and different materials Main Features Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable stainless steel construction High efficient European Vacuum Pump Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations
The multi-function packaging line integrates automatic package forming, filling, vacuuming, gas flushing, sealing, printing, cutting, conveying processes all in one set of machine. Specification Model DRZ-420 Machine dimension 5300 950 x 1860 mm Width of forming film 422mm Width of sealing film 393mm Vacuum Degree 0.1mBar Max. forming depth 70 mm Vacuum Pump 100-300m3/h Customizable Yes Power Apply to using area Features Multi function packaging machine line is highly customizable product, the above datas are all customizable. Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable SUS304 stainless steel construction Original German (BUSCH or Gardner Denver) vacuum pump guarantee performance and durability. Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations AirTAC valve terminal type pneumatic system. Photoelectric tracking sensor from USA Banner Corp guarantees high precision package, perfectly adapt to different gloss lamination package. Cross-cutting knife operates independently and controlled by computer. No need to change cross-cutting knives when die set is changed Equipped with warning and protection system for power default phase, reverse phase and overtension, and lubrication of machines, which can help for operator use and adjust easily. Forming, sealing, cross knife and rolling knife are all equipped with safety protection system and safety cover. System can automaticly stop in case of emergency. In the meanwhile, screen can show faults of system and appropriate solutions. Options Special design is available for various product Cross cutting applies to different pattern Extendable filling area Automatic notice for insufficient film supply function Date injecting, date thermal printing, labeling, water cooling machine Gas flushing available for Modified Atmosphere Packaging (MAP) Die sets customizable. Extra die sets available at certain prices. Different vacuum pump options Functions Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Electronic or metal parts: to avoid dampness and prevent rust Extend product shelf life Nice appearance Available for special applications Applications Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicine etc.
The multi-function packaging line integrates automatic package forming, filling, vacuuming, gas flushing, sealing, printing, cutting, conveying processes all in one set of machine. Specification Model DRZ-420 Machine dimension 5300 950 x 1860 mm Width of forming film 422mm Width of sealing film 393mm Vacuum Degree 0.1mBar Max. forming depth 70 mm Vacuum Pump 100-300m3/h Customizable Yes Power Apply to using area Features Multi function packaging machine line is highly customizable product, the above datas are all customizable. Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable SUS304 stainless steel construction Original German (BUSCH or Gardner Denver) vacuum pump guarantee performance and durability. Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations AirTAC valve terminal type pneumatic system. Photoelectric tracking sensor from USA Banner Corp guarantees high precision package, perfectly adapt to different gloss lamination package. Cross-cutting knife operates independently and controlled by computer. No need to change cross-cutting knives when die set is changed Equipped with warning and protection system for power default phase, reverse phase and overtension, and lubrication of machines, which can help for operator use and adjust easily. Forming, sealing, cross knife and rolling knife are all equipped with safety protection system and safety cover. System can automaticly stop in case of emergency. In the meanwhile, screen can show faults of system and appropriate solutions. Options Special design is available for various product Cross cutting applies to different pattern Extendable filling area Automatic notice for insufficient film supply function Date injecting, date thermal printing, labeling, water cooling machine Gas flushing available for Modified Atmosphere Packaging (MAP) Die sets customizable. Extra die sets available at certain prices. Different vacuum pump options Functions Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Electronic or metal parts: to avoid dampness and prevent rust Extend product shelf life Nice appearance Available for special applications Applications Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicine etc.
The multi-function packaging line integrates automatic package forming, filling, vacuuming, gas flushing, sealing, printing, cutting, conveying processes all in one set of machine. Specification Model DRZ-420 Machine dimension 5300 950 x 1860 mm Width of forming film 422mm Width of sealing film 393mm Vacuum Degree 0.1mBar Max. forming depth 70 mm Vacuum Pump 100-300m3/h Customizable Yes Power Apply to using area Features Multi function packaging machine line is highly customizable product, the above datas are all customizable. Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable SUS304 stainless steel construction Original German (BUSCH or Gardner Denver) vacuum pump guarantee performance and durability. Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations AirTAC valve terminal type pneumatic system. Photoelectric tracking sensor from USA Banner Corp guarantees high precision package, perfectly adapt to different gloss lamination package. Cross-cutting knife operates independently and controlled by computer. No need to change cross-cutting knives when die set is changed Equipped with warning and protection system for power default phase, reverse phase and overtension, and lubrication of machines, which can help for operator use and adjust easily. Forming, sealing, cross knife and rolling knife are all equipped with safety protection system and safety cover. System can automaticly stop in case of emergency. In the meanwhile, screen can show faults of system and appropriate solutions. Options Special design is available for various product Cross cutting applies to different pattern Extendable filling area Automatic notice for insufficient film supply function Date injecting, date thermal printing, labeling, water cooling machine Gas flushing available for Modified Atmosphere Packaging (MAP) Die sets customizable. Extra die sets available at certain prices. Different vacuum pump options Functions Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Applications Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicineâ?¦etc.
The multi-function packaging line integrates automatic package forming, filling, vacuuming, gas flushing, sealing, printing, cutting, conveying processes all in one set of machine. Specification Model DRZ-420 Machine dimension 5300 950 x 1860 mm Width of forming film 422mm Width of sealing film 393mm Vacuum Degree 0.1mBar Max. forming depth 70 mm Vacuum Pump 100-300m3/h Customizable Yes Power Apply to using area Features Multi function packaging machine line is highly customizable product, the above datas are all customizable. Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable SUS304 stainless steel construction Original German (BUSCH or Gardner Denver) vacuum pump guarantee performance and durability. Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations AirTAC valve terminal type pneumatic system. Photoelectric tracking sensor from USA Banner Corp guarantees high precision package, perfectly adapt to different gloss lamination package. Cross-cutting knife operates independently and controlled by computer. No need to change cross-cutting knives when die set is changed Equipped with warning and protection system for power default phase, reverse phase and overtension, and lubrication of machines, which can help for operator use and adjust easily. Forming, sealing, cross knife and rolling knife are all equipped with safety protection system and safety cover. System can automaticly stop in case of emergency. In the meanwhile, screen can show faults of system and appropriate solutions. Options Special design is available for various product Cross cutting applies to different pattern Extendable filling area Automatic notice for insufficient film supply function Date injecting, date thermal printing, labeling, water cooling machine Gas flushing available for Modified Atmosphere Packaging (MAP) Die sets customizable. Extra die sets available at certain prices. Different vacuum pump options Functions Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Applications Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicine etc.
The multi-function packaging line integrates automatic package forming, filling, vacuuming, gas flushing, sealing, printing, cutting, conveying processes all in one set of machine. Specification Model DRZ-420 Machine dimension 5300 950 x 1860 mm Width of forming film 422mm Width of sealing film 393mm Vacuum Degree 0.1mBar Max. forming depth 70 mm Vacuum Pump 100-300m3/h Customizable Yes Power Apply to using area Features Multi function packaging machine line is highly customizable product, the above datas are all customizable. Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable SUS304 stainless steel construction Original German (BUSCH or Gardner Denver) vacuum pump guarantee performance and durability. Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations AirTAC valve terminal type pneumatic system. Photoelectric tracking sensor from USA Banner Corp guarantees high precision package, perfectly adapt to different gloss lamination package. Cross-cutting knife operates independently and controlled by computer. No need to change cross-cutting knives when die set is changed Equipped with warning and protection system for power default phase, reverse phase and overtension, and lubrication of machines, which can help for operator use and adjust easily. Forming, sealing, cross knife and rolling knife are all equipped with safety protection system and safety cover. System can automaticly stop in case of emergency. In the meanwhile, screen can show faults of system and appropriate solutions. Options Special design is available for various product Cross cutting applies to different pattern Extendable filling area Automatic notice for insufficient film supply function Date injecting, date thermal printing, labeling, water cooling machine Gas flushing available for Modified Atmosphere Packaging (MAP) Die sets customizable. Extra die sets available at certain prices. Different vacuum pump options Functions Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Applications Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicine etc.
The multi-function packaging line integrates automatic package forming, filling, vacuuming, gas flushing, sealing, printing, cutting, conveying processes all in one set of machine. Specification Model DRZ-420 Machine dimension 5300 950 x 1860 mm Width of forming film 422mm Width of sealing film 393mm Vacuum Degree 0.1mBar Max. forming depth 70 mm Vacuum Pump 100-300m3/h Customizable Yes Power Apply to using area Features Multi function packaging machine line is highly customizable product, the above datas are all customizable. Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable SUS304 stainless steel construction Original German (BUSCH or Gardner Denver) vacuum pump guarantee performance and durability. Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations AirTAC valve terminal type pneumatic system. Photoelectric tracking sensor from USA Banner Corp guarantees high precision package, perfectly adapt to different gloss lamination package. Cross-cutting knife operates independently and controlled by computer. No need to change cross-cutting knives when die set is changed Equipped with warning and protection system for power default phase, reverse phase and overtension, and lubrication of machines, which can help for operator use and adjust easily. Forming, sealing, cross knife and rolling knife are all equipped with safety protection system and safety cover. System can automaticly stop in case of emergency. In the meanwhile, screen can show faults of system and appropriate solutions. Options Special design is available for various product Cross cutting applies to different pattern Extendable filling area Automatic notice for insufficient film supply function Date injecting, date thermal printing, labeling, water cooling machine Gas flushing available for Modified Atmosphere Packaging (MAP) Die sets customizable. Extra die sets available at certain prices. Different vacuum pump options Functions Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Applications Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicine etc.
The multi-function packaging line integrates automatic package forming, filling, vacuuming, gas flushing, sealing, printing, cutting, conveying processes all in one set of machine. Specification Model DRZ-420 Machine dimension 5300 950 x 1860 mm Width of forming film 422mm Width of sealing film 393mm Vacuum Degree 0.1mBar Max. forming depth 70 mm Vacuum Pump 100-300m3/h Customizable Yes Power Apply to using area Features Multi function packaging machine line is highly customizable product, the above datas are all customizable. Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable SUS304 stainless steel construction Original German (BUSCH or Gardner Denver) vacuum pump guarantee performance and durability. Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations AirTAC valve terminal type pneumatic system. Photoelectric tracking sensor from USA Banner Corp guarantees high precision package, perfectly adapt to different gloss lamination package. Cross-cutting knife operates independently and controlled by computer. No need to change cross-cutting knives when die set is changed Equipped with warning and protection system for power default phase, reverse phase and overtension, and lubrication of machines, which can help for operator use and adjust easily. Forming, sealing, cross knife and rolling knife are all equipped with safety protection system and safety cover. System can automaticly stop in case of emergency. In the meanwhile, screen can show faults of system and appropriate solutions. Options Special design is available for various product Cross cutting applies to different pattern Extendable filling area Automatic notice for insufficient film supply function Date injecting, date thermal printing, labeling, water cooling machine Gas flushing available for Modified Atmosphere Packaging (MAP) Die sets customizable. Extra die sets available at certain prices. Different vacuum pump options Functions Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Applications Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicine etc.
The multi-function packaging line integrates automatic package forming, filling, vacuuming, gas flushing, sealing, printing, cutting, conveying processes all in one set of machine. Specification Model DRZ-420 Machine dimension 5300 950 x 1860 mm Width of forming film 422mm Width of sealing film 393mm Vacuum Degree 0.1mBar Max. forming depth 70 mm Vacuum Pump 100-300m3/h Customizable Yes Power Apply to using area Features Multi function packaging machine line is highly customizable product, the above datas are all customizable. Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable SUS304 stainless steel construction Original German (BUSCH or Gardner Denver) vacuum pump guarantee performance and durability. Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations AirTAC valve terminal type pneumatic system. Photoelectric tracking sensor from USA Banner Corp guarantees high precision package, perfectly adapt to different gloss lamination package. Cross-cutting knife operates independently and controlled by computer. No need to change cross-cutting knives when die set is changed Equipped with warning and protection system for power default phase, reverse phase and overtension, and lubrication of machines, which can help for operator use and adjust easily. Forming, sealing, cross knife and rolling knife are all equipped with safety protection system and safety cover. System can automaticly stop in case of emergency. In the meanwhile, screen can show faults of system and appropriate solutions. Options Special design is available for various product Cross cutting applies to different pattern Extendable filling area Automatic notice for insufficient film supply function Date injecting, date thermal printing, labeling, water cooling machine Gas flushing available for Modified Atmosphere Packaging (MAP) Die sets customizable. Extra die sets available at certain prices. Different vacuum pump options Functions Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Applications Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicine etc.
The multi-function packaging line integrates automatic package forming, filling, vacuuming, gas flushing, sealing, printing, cutting, conveying processes all in one set of machine. Specification Model DRZ-420 Machine dimension 5300 950 x 1860 mm Width of forming film 422mm Width of sealing film 393mm Vacuum Degree 0.1mBar Max. forming depth 70 mm Vacuum Pump 100-300m3/h Customizable Yes Power Apply to using area Features Multi function packaging machine line is highly customizable product, the above datas are all customizable. Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable SUS304 stainless steel construction Original German (BUSCH or Gardner Denver) vacuum pump guarantee performance and durability. Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations AirTAC valve terminal type pneumatic system. Photoelectric tracking sensor from USA Banner Corp guarantees high precision package, perfectly adapt to different gloss lamination package. Cross-cutting knife operates independently and controlled by computer. No need to change cross-cutting knives when die set is changed Equipped with warning and protection system for power default phase, reverse phase and overtension, and lubrication of machines, which can help for operator use and adjust easily. Forming, sealing, cross knife and rolling knife are all equipped with safety protection system and safety cover. System can automaticly stop in case of emergency. In the meanwhile, screen can show faults of system and appropriate solutions. Options Special design is available for various product Cross cutting applies to different pattern Extendable filling area Automatic notice for insufficient film supply function Date injecting, date thermal printing, labeling, water cooling machine Gas flushing available for Modified Atmosphere Packaging (MAP) Die sets customizable. Extra die sets available at certain prices. Different vacuum pump options Functions Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Applications Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicine etc.
The multi-function packaging line integrates automatic package forming, filling, vacuuming, gas flushing, sealing, printing, cutting, conveying processes all in one set of machine. Specification Model DRZ-420 Machine dimension 5300 950 x 1860 mm Width of forming film 422mm Width of sealing film 393mm Vacuum Degree 0.1mBar Max. forming depth 70 mm Vacuum Pump 100-300m3/h Customizable Yes Power Apply to using area Features Multi function packaging machine line is highly customizable product, the above datas are all customizable. Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable SUS304 stainless steel construction Original German (BUSCH or Gardner Denver) vacuum pump guarantee performance and durability. Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations AirTAC valve terminal type pneumatic system. Photoelectric tracking sensor from USA Banner Corp guarantees high precision package, perfectly adapt to different gloss lamination package. Cross-cutting knife operates independently and controlled by computer. No need to change cross-cutting knives when die set is changed Equipped with warning and protection system for power default phase, reverse phase and overtension, and lubrication of machines, which can help for operator use and adjust easily. Forming, sealing, cross knife and rolling knife are all equipped with safety protection system and safety cover. System can automaticly stop in case of emergency. In the meanwhile, screen can show faults of system and appropriate solutions. Options Special design is available for various product Cross cutting applies to different pattern Extendable filling area Automatic notice for insufficient film supply function Date injecting, date thermal printing, labeling, water cooling machine Gas flushing available for Modified Atmosphere Packaging (MAP) Die sets customizable. Extra die sets available at certain prices. Different vacuum pump options Functions Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Applications Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicine etc.
The multi-function packaging line integrates automatic package forming, filling, vacuuming, gas flushing, sealing, printing, cutting, conveying processes all in one set of machine. Specification Model DRZ-420 Machine dimension 5300 950 x 1860 mm Width of forming film 422mm Width of sealing film 393mm Vacuum Degree 0.1mBar Max. forming depth 70 mm Vacuum Pump 100-300m3/h Customizable Yes Power Apply to using area Features Multi function packaging machine line is highly customizable product, the above datas are all customizable. Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable SUS304 stainless steel construction Original German (BUSCH or Gardner Denver) vacuum pump guarantee performance and durability. Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations AirTAC valve terminal type pneumatic system. Photoelectric tracking sensor from USA Banner Corp guarantees high precision package, perfectly adapt to different gloss lamination package. Cross-cutting knife operates independently and controlled by computer. No need to change cross-cutting knives when die set is changed Equipped with warning and protection system for power default phase, reverse phase and overtension, and lubrication of machines, which can help for operator use and adjust easily. Forming, sealing, cross knife and rolling knife are all equipped with safety protection system and safety cover. System can automaticly stop in case of emergency. In the meanwhile, screen can show faults of system and appropriate solutions. Options Special design is available for various product Cross cutting applies to different pattern Extendable filling area Automatic notice for insufficient film supply function Date injecting, date thermal printing, labeling, water cooling machine Gas flushing available for Modified Atmosphere Packaging (MAP) Die sets customizable. Extra die sets available at certain prices. Different vacuum pump options Functions Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Applications Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicine etc.
The multi-function packaging line integrates automatic package forming, filling, vacuuming, gas flushing, sealing, printing, cutting, conveying processes all in one set of machine. Specification Model DRZ-420 Machine dimension 5300 950 x 1860 mm Width of forming film 422mm Width of sealing film 393mm Vacuum Degree 0.1mBar Max. forming depth 70 mm Vacuum Pump 100-300m3/h Customizable Yes Power Apply to using area Features Multi function packaging machine line is highly customizable product, the above datas are all customizable. Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable SUS304 stainless steel construction Original German (BUSCH or Gardner Denver) vacuum pump guarantee performance and durability. Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations AirTAC valve terminal type pneumatic system. Photoelectric tracking sensor from USA Banner Corp guarantees high precision package, perfectly adapt to different gloss lamination package. Cross-cutting knife operates independently and controlled by computer. No need to change cross-cutting knives when die set is changed Equipped with warning and protection system for power default phase, reverse phase and overtension, and lubrication of machines, which can help for operator use and adjust easily. Forming, sealing, cross knife and rolling knife are all equipped with safety protection system and safety cover. System can automaticly stop in case of emergency. In the meanwhile, screen can show faults of system and appropriate solutions. Options Special design is available for various product Cross cutting applies to different pattern Extendable filling area Automatic notice for insufficient film supply function Date injecting, date thermal printing, labeling, water cooling machine Gas flushing available for Modified Atmosphere Packaging (MAP) Die sets customizable. Extra die sets available at certain prices. Different vacuum pump options Functions Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Electronic or metal parts: to avoid dampness and prevent rust Extend product shelf life Nice appearance Available for special applications Applications Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicine etc.
The multi-function packaging line integrates automatic package forming, filling, vacuuming, gas flushing, sealing, printing, cutting, conveying processes all in one set of machine. Specification Model DRZ-420 Machine dimension 5300 950 x 1860 mm Width of forming film 422mm Width of sealing film 393mm Vacuum Degree 0.1mBar Max. forming depth 70 mm Vacuum Pump 100-300m3/h Customizable Yes Power Apply to using area Features Multi function packaging machine line is highly customizable product, the above datas are all customizable. Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable SUS304 stainless steel construction Original German (BUSCH or Gardner Denver) vacuum pump guarantee performance and durability. Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations AirTAC valve terminal type pneumatic system. Photoelectric tracking sensor from USA Banner Corp guarantees high precision package, perfectly adapt to different gloss lamination package. Cross-cutting knife operates independently and controlled by computer. No need to change cross-cutting knives when die set is changed Equipped with warning and protection system for power default phase, reverse phase and overtension, and lubrication of machines, which can help for operator use and adjust easily. Forming, sealing, cross knife and rolling knife are all equipped with safety protection system and safety cover. System can automaticly stop in case of emergency. In the meanwhile, screen can show faults of system and appropriate solutions. Options Special design is available for various product Cross cutting applies to different pattern Extendable filling area Automatic notice for insufficient film supply function Date injecting, date thermal printing, labeling, water cooling machine Gas flushing available for Modified Atmosphere Packaging (MAP) Die sets customizable. Extra die sets available at certain prices. Different vacuum pump options Functions Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Applications Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicine etc.
The multi-function packaging line integrates automatic package forming, filling, vacuuming, gas flushing, sealing, printing, cutting, conveying processes all in one set of machine. Specification Model DRZ-420 Machine dimension 5300 950 x 1860 mm Width of forming film 422mm Width of sealing film 393mm Vacuum Degree 0.1mBar Max. forming depth 70 mm Vacuum Pump 100-300m3/h Customizable Yes Power Apply to using area Features Multi function packaging machine line is highly customizable product, the above datas are all customizable. Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable SUS304 stainless steel construction Original German (BUSCH or Gardner Denver) vacuum pump guarantee performance and durability. Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations AirTAC valve terminal type pneumatic system. Photoelectric tracking sensor from USA Banner Corp guarantees high precision package, perfectly adapt to different gloss lamination package. Cross-cutting knife operates independently and controlled by computer. No need to change cross-cutting knives when die set is changed Equipped with warning and protection system for power default phase, reverse phase and overtension, and lubrication of machines, which can help for operator use and adjust easily. Forming, sealing, cross knife and rolling knife are all equipped with safety protection system and safety cover. System can automaticly stop in case of emergency. In the meanwhile, screen can show faults of system and appropriate solutions. Options Special design is available for various product Cross cutting applies to different pattern Extendable filling area Automatic notice for insufficient film supply function Date injecting, date thermal printing, labeling, water cooling machine Gas flushing available for Modified Atmosphere Packaging (MAP) Die sets customizable. Extra die sets available at certain prices. Different vacuum pump options Functions Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Applications Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicine etc.
The multi-function packaging line integrates automatic package forming, filling, vacuuming, gas flushing, sealing, printing, cutting, conveying processes all in one set of machine. Specification Model DRZ-420 Machine dimension 5300 950 x 1860 mm Width of forming film 422mm Width of sealing film 393mm Vacuum Degree 0.1mBar Max. forming depth 70 mm Vacuum Pump 100-300m3/h Customizable Yes Power Apply to using area Features Multi function packaging machine line is highly customizable product, the above datas are all customizable. Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable SUS304 stainless steel construction Original German (BUSCH or Gardner Denver) vacuum pump guarantee performance and durability. Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations AirTAC valve terminal type pneumatic system. Photoelectric tracking sensor from USA Banner Corp guarantees high precision package, perfectly adapt to different gloss lamination package. Cross-cutting knife operates independently and controlled by computer. No need to change cross-cutting knives when die set is changed Equipped with warning and protection system for power default phase, reverse phase and overtension, and lubrication of machines, which can help for operator use and adjust easily. Forming, sealing, cross knife and rolling knife are all equipped with safety protection system and safety cover. System can automaticly stop in case of emergency. In the meanwhile, screen can show faults of system and appropriate solutions. Options Special design is available for various product Cross cutting applies to different pattern Extendable filling area Automatic notice for insufficient film supply function Date injecting, date thermal printing, labeling, water cooling machine Gas flushing available for Modified Atmosphere Packaging (MAP) Die sets customizable. Extra die sets available at certain prices. Different vacuum pump options Functions Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Applications Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicine etc.
The multi-function packaging line integrates automatic package forming, filling, vacuuming, gas flushing, sealing, printing, cutting, conveying processes all in one set of machine. Specification Model DRZ-420 Machine dimension 5300 950 x 1860 mm Width of forming film 422mm Width of sealing film 393mm Vacuum Degree 0.1mBar Max. forming depth 70 mm Vacuum Pump 100-300m3/h Customizable Yes Power Apply to using area Features Multi function packaging machine line is highly customizable product, the above datas are all customizable. Cycle speed is adjustable by touch panel, easy to read and operate (with choice of multi-language) Durable SUS304 stainless steel construction Original German (BUSCH or Gardner Denver) vacuum pump guarantee performance and durability. Forming depth is adjustable Machine can be set up for clear and printed film Fast, simple, easy change over for die sets Safety measures conform to CE regulations AirTAC valve terminal type pneumatic system. Photoelectric tracking sensor from USA Banner Corp guarantees high precision package, perfectly adapt to different gloss lamination package. Cross-cutting knife operates independently and controlled by computer. No need to change cross-cutting knives when die set is changed Equipped with warning and protection system for power default phase, reverse phase and overtension, and lubrication of machines, which can help for operator use and adjust easily. Forming, sealing, cross knife and rolling knife are all equipped with safety protection system and safety cover. System can automaticly stop in case of emergency. In the meanwhile, screen can show faults of system and appropriate solutions. Options Special design is available for various product Cross cutting applies to different pattern Extendable filling area Automatic notice for insufficient film supply function Date injecting, date thermal printing, labeling, water cooling machine Gas flushing available for Modified Atmosphere Packaging (MAP) Die sets customizable. Extra die sets available at certain prices. Different vacuum pump options Functions Food: to prevent oxidation, mildew, insect borers and dampness; to maintain product freshness and to preserve flavor Applications Fresh meat, seafood, pickles, vegetables, agricultural products, fruit, vegetarian food, herbs, bean paste, prepared foods, electronic parts, precious metals, precision instruments, medical instruments and medicine etc.
