Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
We will deliver all Elevator parts. Panels Doors Headers Sills Door contact switch All limit switches
One of the most efficient ways to elevate bulk materials vertically is a bucket elevator. This bucket elevator is suited for transportation of cereals, seeds, fertilizers of granular products. A bucket elevator consists of a series of buckets attached to a belt with sprockets located at the top and bottom of the unit. Bulk materials are loaded into each bucket as the bucket moves past an inlet point. As the bucket goes over the head sprocket, materials pour out of the bucket into a discharge. It is worth noting that our bucket elevator is greatly flexible as it meets the construction requirements of individual plant layouts, i.e. height, bucket width, and carbon or stainless steel build. With weather-proof & dust-proof construction and security measures that are carefully fitted to maintain product integrity and work environment. Thus, that is the reliable bucket elevator of maximum grain throughput and less grain damage base on stable operation in processing production.
Model SLX side door elevators with square shoulder are suitable for handling tubing,casing,drill pipe and drill collar in oil and natural gas drilling,well construction.The products are desinged and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hositing Equipment.
SJ series auxiliary elevator is mainly used as a tool in handing single casing or tubing in oil and natural gas drilling and cementing operation.The products are designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
CDZ drilling pipe elevator is mainly used in the holding and hoisting of drilling pipe with 18 degree taper and tools in oil and natural gas drilling ,well construction.The products shall be designed and manufacutured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
Model CD side door elevators with square shoulder are suitable for handling tubing,casing,drill pipe and drill collar in oil and natural gas drilling,well construction.The products are designed and manufactured according to the requirements in API 8C Sepecification for Drilling and Production Hositing Equipment.
CDZ drilling pipe elevator is mainly used in the holding and hoisting of drilling pipe with 18 degree taper and tools in oil and natural gas drilling,well construction.The products shall be designed and manufactured according to the requirements in API Spec 8C Specification for Drilling and Production Hoisting Equipment.
We are the supplier for elevator-escalator-Lift and their parts. Guided Rail Price Available. 50*50*5 (A) (T50) 1800 Mt 70*65*9 (B) (T70) 900 Mt 89*62*16 (B) 900 Mt Include all Flange.
Model SLX side door elevators with square shoulder are suitable for handling tubing, casing, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API 8A/8C Specification for drilling and production hoisting equipment.
Model SLX side door elevators with square shoulder are suitable for handling tubing, casing, drill pipes and drill collars in oil drilling, natural gas drilling and well construction. The products shall be designed and manufactured according to API 8A/8C Specification for drilling and production hoisting equipment.
Panoramic elevator It adopt highly secure safety laminated glass. It is transparent. The passengers might appreciate the busy and prosperous city sight through the transparent car wall. Superior car wall It adopt highly secure safety laminated glass. It is transparent. The passengers might appreciate the busy and prosperous city sight through the transparent car wall. Lamination layer in laminated glass resists radiation. It buffers sound-wave vibration and isolates the sound. Large area car wall glass design shows smooth and beautiful lines. It beautifies the elevator car outline. Furthermore, the buildings are more attractive. Outer glass hood It harmoniously combines with the building and surroundings. Panoramic elevator is part of the building. It also adds a mobile charming scene for the building. Fiber g lass reinforced plastic construction It perfectly displays an overall compact and beautiful space. It can carry out different construction layout designs. It is prompt and convenient. Round halfround, square etc. Are available for your free choice.
OEM Customized Passenger Elevator. We can produce the elevator according to your requirements.
TA center latch elevators with square shoulder are suitable for handling, drill collar, casing and tubing. The products are designed and manufactured according to the requirements in API Spec 8C specification for Drilling and production Hoisting Equipment
TA center latch elevators with square shoulder are suitable for handling, drill collar, casing and tubing. The products are designed and manufactured according to the requirements in API Spec 8C specification for Drilling and production Hoisting Equipment