NE 30/1 to NE 120/1 combed compact Weaving & knitting , waxed / unwaxed yarns Actual resultant : +ve Imperfections well within Industry standards Inspection & Quality testing always welcome Sampling on request BCI, GOTS ,Organic certification
Seraphim redefined the high-efficiency module series by integrating 182mm silicon wafers with multi-busbar and half-cut cell technologies. Seraphim panel combined creative technology effectively and extremely improved the module efficiency and power output. Maximum Power: 400-415W
Charge Controller Type : MPPT Typical Batt Voltage (V) : 12 V Rated Output Current (A) : 20 A Input Voltage Range : 18-32 Vdc Max PV Open Voltage : 37V Nominal Battery Voltage : Programable to Battery Type Typical Idle Current : 90% Features : Battery Voltage Settings: Boost Charging; Boost Return; Float Charging Battery Low Load Disconnect, Load Reconnect Temp Compensation :18mV/C" Protection : Surge, Over charge, Overload, Short Circuit, Solar and Battery reverse, Revere current from battery at night Enclosure : Open Frame, Only PCB assembly with Chassis will be Supplied
We can offer Solar PV Modules for 3W to 230W with best quality and warranty. Please write us with your requirement for more details. 3W to 230W.
High conversion and low heat, laminated glass iron anti-aging eva and fire tpt backboard, high conversion, long service life and easy to install. Electrical characters: Maximum power: 120w Open circuit voltage:21.5v Short circuit current:7.45a Maximum power voltage: 17v Maximum power current:7.05a Module dimensions: 1420x660x42mm Maximum system voltage: 1000v Weight: 11.5kg Cell dimensions: 150x150mm
1. Mono 160w to 185w 2. Poly from 200w to 230w 3. Some small modules from 1w to 150w 2pcs/carton, 18cartons/pallet
Solar module
Solar modules HIGH EFFICENCY PV MODULE The John-Kenndu JKG-130 series module are designed especailly with the transparant TPT for a better photovoltaic application in the cold climat. The outstanding resistances to the toughe weathe and moisture make the products have a better durability. Type: JKG-130 Framed module in black style with junction box and plugs Cell efficency[%]: 16.5-14.5 Proven materials Solar cell: 5'' monocrystaline silicon cell by MOTECH Glass: Super white solar glass TPT: Transparant EVA: F+RST TM EVA film Cable: Length: 100 cm each Plug: MC4 compatible Silicon glue: Dowcoring 737 neutral cure sealant-transparant
Specifications 1.ZNSHINESOLAR as a vertically intergrated manufacturer,from raw silicon to solar panels. 2.ZNSHINESOLAR's IPO in early 2013. The benefits of this panel: >>High efficiency up to 16.14% >>Highly automated and vertically integrated manufacturing process >>Output guarantee of 25 years >>Europe-wide references >>Bankable in Europe >>Certificate: TUV;CE;UL;RoHS;PV-CYCLE;PowerGuard;etc. Packaging Information Modules per box 24 / 52 pcs. (45 / 40 mm) Modules per 40¡® HQ container 672 / 728 pcs.(45 / 40 mm)
We offer a range of disposable paper glasses that are perfect for events, parties, Corporate, independent, and everyday use. Made from high-quality paper with a glossy finish, our disposable glasses are available in various sizes, starting from 160 GSM. Our disposable paper glasses are suitable for serving cold beverages, with a capacity of up to 150 ml. Beyond that, we offer glass options. The printing on our disposable glasses is done using non-toxic, odorless inks, ensuring your safety and satisfaction. Features Clean, hygienic, and convenient Eco-friendly and degradable Free from toxic elements, safe to use Available in various sizes and styles for hot and cold drinks Suitable for food service, restaurants, and corporate events Customization options available: Plain Double layer Rippled Embossed Bubbled Curly Specifications Industry dimensions: 2oz, 4oz, 8oz, 12oz, 16oz 8oz cups 80mm top diameter x 92mm height 12oz cups 90mm top diameter x 112mm height 16oz cups 90mm top diameter x 137mm height GSM: 155 to 175GSM (60 to 120ml) base paper for smaller cups GSM: 180 to 240GSM (150 to 450ml) base paper for larger glasses
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services. Safe and reliable High quality li-ion cell for mobile use Laser welding connection with high strength and low impedance Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation Damping pad design to improve the impact resistance of the system IP54 safe and reliable operation in outdoor environment Serially designed PCS and battery pack eliminates circulating current and improve system reliability. Integrated BMS,DC, AC multi-layer protection, maximum safety performance design Efficient and Convenient Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion Easy access to PV and diesel generator, intelligent muli-energy management. Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring Multi systems could be connected in parallel Cost optimization One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc. Small size, light weight, less space and installation cost Long cycle life, low failure rate, reduce operation and maintenance investment Maximize green energy utilization. Rated output power: 100KW Rated energy: 150KWH
GRES is an intelligent and modular power supply equipment integrating lithium battery and MPCS. According to different application scenarios, lithium battery, bidirectional DC / AC converter, bidirectional DC / DC converter, Static switch and Power management system can be arbitrarily combined to realize grid connected power supply, off grid power supply and off grid uninterrupted power supply power supply, static reactive power compensation, harmonic suppression and other functions. The system can have access to new energy, power grid, diesel generator and to rreasonable configuration, scientific utilization, to provide users with green, environmental protection, noise free, high reliability and high security power services. Safe and reliable High quality li-ion cell for mobile use Laser welding connection with high strength and low impedance Cells is designed with PC holders and reinforce steel structure to guarantee the highest safety of the system in transportation, installation and operation Damping pad design to improve the impact resistance of the system IP54 safe and reliable operation in outdoor environment Serially designed PCS and battery pack eliminates circulating current and improve system reliability. Integrated BMS,DC, AC multi-layer protection, maximum safety performance design Efficient and Convenient Integrated system, standard modular power module and battery module, easy for installation, maintenance and capacity expantion Easy access to PV and diesel generator, intelligent muli-energy management. Fixed on the ground or mounted on vehicle, can be loaded and unloaded by forklift and hoisted by lifting ring Multi systems could be connected in parallel Cost optimization One investment, multiple benefits:Peak shaving, backup power supply, microgrid building,power quality improving and energy storage,etc. Small size, light weight, less space and installation cost Long cycle life, low failure rate, reduce operation and maintenance investment Maximize green energy utilization. Rated output power: 50KW Rated energy: 75KWH
The 19 inches rack standard backup battery is based on Lithium iron phosphate battery, It has been designed to provide backup power for telecom equipment or energy storage system in household. It has excellent safety, high energy density, long lifetime, very nice temperature performance, green power newly of excellent safety and high reliability. Custom capacity is acceptable. High cycle life 4000 cycles @80% DoD for effectively lower total of ownership cost. Longer service life Low maintenance batteries with stable chemistry. Built in circuit protection Battery Management System (BMS) is incorporated against abuse. Better storage Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation. Quickly recharge Save time and increase productivity with less down time thanks to superior charge/discharge efficiency. Extreme heat tolerance Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60C. Lightweight Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent. Function Support parallel operation
The wall mounted Lithium battery (LiFePO4 Battery) solutions are highly integrated, deep cycle backup power solutions for your solar home energy storage system. With rich experience and advanced techniques, the product has the features of the fashionable design, high energy, high power density, long service life, and easiness of installation and expansion. Custom capacity is acceptable. High cycle life 4000 cycles @80% DoD for effectively lower total of ownership cost. Longer service life Low maintenance batteries with stable chemistry. Built in circuit protection Battery Management System (BMS) is incorporated against abuse. Better storage Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation. Quickly recharge Save time and increase productivity with less down time thanks to superior charge/discharge efficiency. Extreme heat tolerance Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60C. Lightweight Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent. Function Support parallel operation
The wall mounted Lithium battery (LiFePO4 Battery) solutions are highly integrated, deep cycle backup power solutions for your solar home energy storage system. With rich experience and advanced techniques, the product has the features of the fashionable design, high energy, high power density, long service life, and easiness of installation and expansion. Custom capacity is acceptable. High cycle life 4000 cycles @80% DoD for effectively lower total of ownership cost. Longer service life Low maintenance batteries with stable chemistry. Built in circuit protection Battery Management System (BMS) is incorporated against abuse. Better storage Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation. Quickly recharge Save time and increase productivity with less down time thanks to superior charge/discharge efficiency. Extreme heat tolerance Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60C. Lightweight Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent. Function Support parallel operation
Features : 3 times peak power, excellent loading capability. Combine inverter/solar controller/battery all in one. Multiple output : 2*AC output socket, 4*DC 12V, 2* Working mode AC prior/ECO mode/Solar prior selectable AC charging current 0 1 0A selectable. LVD/HVD/Charging voltage adjutable, suitable for kinds of battery Adding fault code to monitor real time work situations Continuous stable p ure sine wave output with inbuilt AVR stabilizer . Digital LCD and LED for visualization of operation status of the equipment. Inbuilt automatic AC charger and AC mains switcher, stwitch time 4ms
The 19 inches rack standard backup battery is based on Lithium iron phosphate battery, It has been designed to provide backup power for telecom equipment or energy storage system in household. It has excellent safety, high energy density, long lifetime, very nice temperature performance, green power newly of excellent safety and high reliability. Custom capacity is acceptable. High cycle life 4000 cycles @80% DoD for effectively lower total of ownership cost. Longer service life Low maintenance batteries with stable chemistry. Built in circuit protection Battery Management System (BMS) is incorporated against abuse. Better storage Up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation. Quickly recharge Save time and increase productivity with less down time thanks to superior charge/discharge efficiency. Extreme heat tolerance Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60C. Lightweight Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent. Function Support parallel operation
Input Voltage 12V / 24V DC optional Output Voltage 115V / 230V AC optional Portable power for AC products, AC outlets for connecting multiple loads High surge capacity for products that require more power to start High efficiency converts virtually all of the battery's power to AC Mounting brackets for convenient installation Heavy duty stud-connection mounting RS232 communication port WIFI/BMS Optional Overload and over temperature shut down Low voltage and over voltage alarm/cut off Input reverse protection Short circuit protection PI15 series is a pure sine wave inverter, high frequency machine solution, the product is small size, the solution is reliable and stable, the main function is to invert the DC 12VDC battery or 24VDC battery to AC 230VAC or AC 115VAC output, mainly used for emergency use Electricity, car inverter, outdoor electricity and other occasions.
Rated power : 5KW Pure sine wave solar inverter Output power factor 1 Built-in 80A MPPT solar charger Built-in anti-dust kit for harsh environment Support parallel operation up to 3 units (available for 3KW-5.5KW 48V) WIFI remote monitoring (optional) Compatible to generator
Solar Modules: We are supplying solar cells for the last few years to the Solar Module Manufactures all over INDIA. We are importing Solar Cells from different countries like KORA, CHINA, HONGKONG, GREECE, FRENCH ETC. These cells we are doing segregation in the aspects of Electrically,Cosmetically and visual checking and supply the same to our customers. As we have very good facility to do all segregation process,we are able to supply Good Quality of Solar Cells to all our end customers in INDIA. The brands which we are dealing mainly HYUNDAI,HANWHA,SUNTECH and other prominent brands
