PoE Injector for door locks PT-PSE105GBS-D is a single port fiber PoE Media converter with 4 Pair PoE up to 90 watts of power with 6Kv surge protection PoE Injector for displays Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. PoE Injector for information kiosks Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 50-57Vdc, the output voltage follows input and operates under -40 to +65, For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. It is suitable for special scenarios, like highway side, exurb, etc. PoE Injector for IoT application Specifications Parameter high quality PoE Injector Description Key Features Industrial Fiber PoE can be outdoor use by covered with waterproof case Surge protection at PoE port 1000Base-FX to 10/100/1000Base-TX SFP slot for Multi mode or Single mode SFP transceiver Gigabit data rates DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GBS-D Ports condition SFP Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 3/6(+),1/2(-) Output Power Voltage: 50-57Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 50-57Vdc Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV AC Surge Protection Line-Earth 1.2/50us (8/20us):2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*1, SFP slot*1 Size:144.5 X 96 X 35.4mm Weight: 485gï¼?1.1lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Green SFP fiber indicator: Green PoE data indicator: Yellow Warranty 2 year
outdoor PoE Injector Designed for the PoE++ powered 95W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. high quality PoE Injector Enclosed in an IP20 high-impact metal case, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 100-240VAC with 6KV surge protection, 50 or 60 Hz and operates under -40 to +65. The effective distance limitation is 100 meters over Cat5e/Cat6 cables. PoE Injector manufacturer: Creative Lianjie Network Technology Co., Ltd indoor PoE Injector Specifications Parameter UL certification PoE Description Key Features Industrial PoE can be outdoor use by covered with waterproof case Extend temperature from -40 to 65 Lighting Protection at PoE port Gigabit data rates IP20 high-impact metal enclosure AC power cord with optional US or EU plug or other standard plug Diagnostic LEDs Part Number PT-PSE109GBRO Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) and 3/6(+),1/2(-) Output Power Voltage: 55Vdc User Port Power: 95W Guaranteen Input AC Input Voltage:90 to 264Vac(100 to 240Vac Rated) AC Input Current: 2.0A Frequency: 47 to 63Hz (50/60Hz Typ.) Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Metal Color: Black Mounting:Wall-mounted IP Rated: IP20 Connectors: Shielded RJ-45*2 Size: 214 X 134 X 41mm Weight: 1070gï¼?2.36lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Green Warranty 2 year Safety Approvals cUL/UL, CE, CB, FCC, RCM, NOM
PT-POS401GR-OT is a 4-ports ourdoor use PoE switch with 2 Pair PoE,each port up to 30 watts of power at 55 VDC at 0.55 amp.Switch industrial poe has sealing gasket inside which passed extension, bearing, corrosion, aging test. 4 ports includ 1 LAN port and 3 PoE output ports with 6KV (10/700us) surge protection. outdoor poe switch suppots 10/100/1000-Mbps of data speed. It is compliant with IEEE802.3af/at standard equipments, such as wireless APs, network camera, VoIP phone, base stations, and other high power Ethernet terminals.It has detection chip inside, which will detect and classify PD before powering it. outdoor poe switch will not provide power until a standard-compliant PD is detected. poe switch supplier: Creative Lianjie Network Technology Co., Ltd Enclosed in an IP67 waterproof metal casing, designed for outdoor installation with installation kit PT-POT-MBK, no need to open the equipment. It operates with input voltage of 100-240Vdc, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). PoE Switch for network camera Specifications Parameter Description Key Features 1 LAN+3 PoE ports PoE Switch Wide temperature solutions Lighting Protection Part Number PT-POS401GR-OT Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*3,Earth Port*1 Regulatory Compliance IEEE802.3 af/at RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 3/6 (+), 1/2 () Output Power Voltage: 55Vdc Output Current: 550mA (Per Port) User Port Power: 30W Guaranteen(Per Port) Input AC Input Voltage: 100 to 240 Vac AC Input Current: 2A Frequency: 47 to 63Hz (50/60Hz Typ.) Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV
PT-POS401GRF-OT is a 4-ports ourdoor use PoE switch with 2 Pair PoE, each port up to 30 watts of power at 55 VDC at 0.55 amp. It has sealing gasket inside which passed extension, bearing, corrosion, aging test. 4 ports includ 1 SFP port and 3 PoE output ports with 6KV (10/700us) surge protection. PoE Switch for VoIP phone It suppots 10/100/1000-Mbps of data speed. It is compliant with IEEE802.3af/at standard equipments, such as wireless APs, network camera, VoIP phone, base stations, and other high power Ethernet terminals.It has detection chip inside, which will detect and classify PD before powering it. It will not provide power until a standard-compliant PD is detected. PoE Switch for base stations Enclosed in an IP67 waterproof metal casing, designed for outdoor installation with installation kit PT-POT-MBK, no need to open the equipment. It operates with input voltage of 100-240Vdc, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). switch industrial poe Specifications Parameter Description PoE Switch for network camera Key Features 1 SFP +3 PoE ports PoE Switch Wide temperature solutions Lighting Protection Part Number PT-POS401GRF-OT Ports condition SFP Port*1, AC Input Port*1, PoE Output Port*3,Earth Port*1 Regulatory Compliance IEEE802.3 af/at RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 3/6 (+), 1/2 () Output Power Voltage: 55Vdc Output Current: 550mA (Per Port) User Port Power: 30W Guaranteen(Per Port) Input AC Input Voltage: 100 to 240 Vac AC Input Current: 2A Frequency: 47 to 63Hz (50/60Hz Typ.) Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV Mechanical Characteristics Case: Metal Color: White Mounting: Wall- mounted/ Pole-mounted IP Rated: IP67 Connectors: Shielded RJ-45*3,SFP*1 Size: 176mmX 269mmX 65mm Weight: 1.8kgï¼?3.97lbï¼? Warranty 2 year
outdoor poe switch PT-POS401GR-OT-D is a 3 port outdoor Switch with 2 Pair PoE up to 30 watts of power at 55 VDC at 0.55 amp. PoE Switch for wireless APs Designed for the PoE+ powered 30W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3at and remains compatible with any IEEE802.3af compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We can custom PoE Switch Enclosed in an IP67 fire retardant metal case, designed for indoor installation with Wall-mounted. outdoor poe switch operates with a wide input voltage of 44-57 VDC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). outdoor poe switch Specifications Parameter Description Key Features Wall-mounted/Pole-mounted Part Number PT-POS401GR-OT-D Ports condition LAN Port*1, DC Input Port*1, PoE Output Port*3 Regulatory Compliance IEEE802.3at RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 30W (per port) Guaranteen Input DC Input Voltage: 44 to 57 Vdc Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Metal Color: White Mounting: Wall-mounted/Pole-mounted IP Rated: IP67 Connectors: Shielded RJ-45*4 Size: 176mmX 269mmX 65mm Weight: 1800gï¼?3lb 15ozï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Green Warranty 2 year Safety Approvals CE/FCC
PT-POS301GWS-AD is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.10 amp. Designed for the PoE++ powered 60w poe switch Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, 60w poe switch supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. outdoor poe switch Enclosed in an IP40 fire retardant metal case, designed for outdoor installation with a Din-rail mount tracking. outdoor poe switch operates with a wide input voltage of 44-57 VDC or 100-240Vac 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender) PoE Switch for network camera Specifications Parameter Description Key Features Industrial Boost PoE Solar Application Lighting Protection DIN Rail Part Number PT-POS301GWS-AD Ports condition LAN Port*1, SFP Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () & 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input DC Input Voltage: 44 to 57 Vdc AC Input Voltage: 100 to 240 Vac Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 4KV Differential mode surge protection (10/700us): 1.5KV Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV
POE Injector For IP Cameras PT-PSE100GF PT-PSE100GF is a single port midspan Injector with 2 Pair PoE up to 15.4 watts of power at 48Vdc, 0.32A amp. Designed for the AF powered 15.4W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3af devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We provide high quality PoE Injector, outdoor PoE Injector, POE for DIN Rail, dc poe injector and soon. Enclosed in an IP40 fire retardant plastic case, designed for indoor use, installation with Wall-mounted. It operates with a wide input voltage of 100-240Vac, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. Can be extended with the PoE Injector for wireless APs PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). We are PoE Injector supplier and more information you can view here Parameter Description Key Features Part Number PT-PSE100GF Ports condition LAN Port*1,AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3af RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps PoE Injector Output Pin Assignment and Polarity: 4/5 (+), 7/8 () Output Power Voltage: 48Vdc User Port Power:15.4W Guaranteen Input Input Voltage: 100-240Vac Frequency: 50/60Hz Typ Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 2000meters AC Surge Protection Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV Mechanical Characteristics Case: plastic Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 134 X 56X 33mm Weight:170g(0.37lb) LED Indicator Power Indicator: Green PoE Load Indicator: Green Warranty 2 year Safety Approvals CE, FCC
PT-PSE106GW is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.1 amp. Household PoE Injector Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as wireless APs, base stations, high power cameras, door locks, displays, POS, information kiosks and other high power Ethernet terminals. It is also compatible and safe to use with any IEEE802.3af/at compliant terminals. It supports 10/100/1000Mbps of data rates. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. China PoE Injector for camera Enclosed in an IP40 plastic case, designed for indoor use. It operates with input voltage of 100-240 Vac, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables. Can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). China Lighting Protection POE Specifications Parameter Description Key Features Part Number PT-PSE106GW Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3af/at/bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () & 3/6(+),1/2(-) Output Power Voltage: 55Vdc Output Power Current: 1100mA User Port Power: 60W Guaranteen Input AC Input Voltage: 100 to 240 Vac AC Input Current: 1.5A Frequency: 47 to 63Hz (50/60Hz Typ.) Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Metal Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 193mmX 85mmX 41mm Weight: 415gï¼?0.88lbï¼? LED Indicator Power Indicator : Green PoE Load Indicator : Green @â?¤30W Blue @>30W â?¤60W Warranty 2 year Safety Approvals cUL / UL / CB / CE / FCC / PSE / SAA
Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon. poe injector 60w Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. It operates with a wide input voltage of 36-72 VDC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). high quality PoE Injector Specifications Parameter PoE Injector for camera Description Key Features Wall-mounted Part Number PT-PSE106GW-AR-D Ports condition LAN Port*1, DC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () and 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input DC Input Voltage: 36 to 72 Vdc DC Input Current: 2.5A Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Plastic Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 193mmX 85mmX 41mm Weight: 380gï¼?13.4ozï¼? LED Indicator Power Indicator : Green PoE Load Indicator : Green @â?¤30W Blue @ï¼?30Wâ?¤60W Warranty 2 year Safety Approvals CE/FCC
PT-PSE106GW-AR is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.1 amp. PoE Injector supplier:Creative Lianjie Network Technology Co., Ltd Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. We provide high quality PoE Injector, UL certification PoE, POE for DIN Rail, dc poe injector and soon. Enclosed in an IP40 fire retardant plastic case, designed for indoor installation with Wall-mounted. UL certification PoE operates with a wide input voltage of 100-240 VAC. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender). high quality PoE Injector Specifications Parameter Description Key Features Wall-mounted PoE Injector Part Number PT-PSE106GW-AR Ports condition LAN Port*1, AC Input Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () and 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input AC Input Voltage: 100-240 Vac Frequency: 47 to 63Hz (50/60Hz Typ.) AC Input Current:1.5A Working Environment Operating Temperature: 0 to 40 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -20 to 70 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Line-Earth 1.2/50us (8/20us): 6KV Line-Line 1.2/50us (8/20us): 4KV AC Surge Protection Line-Earth 1.2/50us (8/20us): 2KV Line-Line 1.2/50us (8/20us): 1KV Mechanical Characteristics Case: Plastic Color: Black Mounting: Wall-mounted IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 193mmX 85mmX 41mm Weight: 425gï¼?15.0ozï¼? LED Indicator Power Indicator : Green PoE Load Indicator : Green @â?¤30W Blue @ï¼?30Wâ?¤60W Warranty 2 year Safety Approvals cUL/UL/FCC/CE/PSE/SAA/BIS
PT-PSE105GB-E is a single port midspan Injector with 4 Pair PoE up to 90 watts of power at 55Vdc, at 1.63Amp with 6Kv surge protection. Designed for the PoE++ powered 90W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, injecteur poe supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. China PoE Injector for IP Cameras Enclosed in an IP40 high-impact metal case with DIN Rail mount bracket, designed for indoor use but can work outdoor by covered with waterproof case. It works with a wide input voltage of 12-48Vdc make it possible for solar application and operates under -40 to +65, For planning purposes, the effective distance is 100 meters over Cat5e/Cat6 cables. PoE Injector supplier and PoE Injector manufacturer :Creative Lianjie Network Technology Co., Ltd injecteur poe Specifications Parameter Description Key Features Industrial PoE can be outdoor use by covered with waterproof case Surge protection at PoE port Gigabit data rates 12-48VDC input make it possible for solar application DIN Rail mount IP40 high-impact metal enclosure Extend temperature from -40 to 65 Diagnostic LEDs Part Number PT-PSE105GB-E Ports condition LAN Port*1, PoE Output Port*1, DC input Terminal Block *1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5(+), 7/8(-) & 1/2(-),3/6(+) Output Power Voltage: 55Vdc User Port Power: 90W Guaranteen Input DC Input Voltage: 12 to 48Vdc DC Input Current: 8.0A Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 6KV Differential mode surge protection (10/700us): 1.5KV Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 144.5mmX 95mmX 35.4mm Weight: 400gï¼?0.88lbï¼? LED Indicator Power Indicator: Green PoE Load Indicator: Yellow Warranty 2 year
PT-PSE105GWS-2D is a single port midspan Injector with 4 Pair PoE up to 60 watts of power at 55 VDC at 1.10 amp. PoE Switch for base stations Designed for the PoE++ powered 60W PoE Powered Devices (PDs), such as IP Cameras, wireless APs, Microwave radio, IoT application, door locks, displays, POS, and information kiosks, It supports 10/100/1000Mbps of data rates. Fully comply with IEEE802.3bt and remains compatible with any IEEE802.3af/at compliant devices. Equipped detecting chip inside, which will detect and classify PD before powering it, protecting non PoE device. PoE Switch for Ethernet terminals Enclosed in an IP40 fire retardant metal case, designed for outdoor installation with a Din-rail mount tracking. It operates with a wide input voltage of 44-57 VDC, 50 or 60 Hz. The effective distance limitation of 100 meters over Cat5e/Cat6 cables can be extended with the PT-PEX-01G-OT(Outdoor or Indoor PoE Extender) We also provide poe adapter, PoE Splitter for wireless APs PoE Switch for VoIP phone China Specifications Parameter Description Key Features Industrial Boost PoE Solar Application Lighting Protection DIN Rail Part Number PT-PSE105GWS-2D Ports condition LAN Port*1, SFP Port*1, PoE Output Port*1 Regulatory Compliance IEEE802.3bt RoHS Compliance WEEE Compliance Pass Through Data Rates 10/100/1000 Mbps Output Pin Assignment and Polarity: 4/5 (+), 7/8 () & 3/6 (+), 1/2 () Output Power Voltage: 55Vdc User Port Power: 60W Guaranteen Input DC Input Voltage: 44 to 57 Vdc Working Environment Operating Temperature: -40 to 65 Operating Humidity: 20% to 80%, non-condensation Storage Temperature: -40 to 85 Storage Humidity: 10% to 90%, non-condensation Operating Altitude: up to 5000meters PoE Surge Protection Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection(10/700us): 4KV Differential mode surge protection (10/700us): 1.5KV Mechanical Characteristics Case: Metal Color: Black Mounting: DIN-rail IP Rated: IP40 Connectors: Shielded RJ-45*2 Size: 144.5mmX 104.2mmX 60mm Weight: 400gï¼?0.88lbï¼? LED Indicator PowerIndicator: Green PoE Load Indicator: Yellow SFP Indicator: Green Lan Indicator: Yellow Warranty 2 year Safety Approvals CE
Diesel fuel injection part.
Element plunger pump.
Head rotor.
Delivery valve.
Type:, common rail nozzle Model no.:, dsla140p1723 Oe no.:, 0 433 175 481 Injector no.:, 0 445 120 123, 0 445 120 022 Engine type:, isde4 & 6 cylinder Application:, dongfeng engine company Brand name:, dyd or neutral Material:, high-speed steel Needle color:, black Net weight:, 30g/pc Gross weight:, 40g/pc Moq:, 1 box Box size:, 10(cm)*4.5(cm)*7.5(cm) Packaging details:, 1pc/tube, 10pcs/box Warranty:, 6 months Shipping way:, dhl, fedex, ups, tnt, ems, aramex, by air, by sea Delivery time:, about 3-5 working days after receiving payment Payment terms:, t/t, western union, moneygram, paypal Current export market:, south/north america, europe, mid east, africa, asia, australia 1pc/tube, 10pcs/box, box size:, 10(cm)*4.5(cm)*7.5(cm), net weight:, 30g/pc Gross weight:, 40g/pc
Common rail tester, common rail tools, diesel fuel system spare parts, diesel fuel system training.
New Arrival!!!!! Caterpillar Injector Parts Spool Valve Manufacturer C7/C9 For Sale FM Our Main Products: 1.Head Rotor:VE head Rotor(Bosch,Denso,Zexel,Delphi) 2.Fuel Injection Pump:(ISUZU,JMC) 3.Ve Pump Parts:(Feed Pump ,Cam Plate, Drive Shaft,Solenoid Valve,Roller Ring,Oil Seal,etc.) 4.Reparit Kit(VE Pump,Lucas,etc.) 5.Plunger:(Type:A,AD,P,PS7100,P8500,MW,PW,PT,etc.) 6.Nozzle:(Type:DN_SD,DNOPDN,S,SN,P,PN.etc.) 7.Delivery Valve(A,P type etc.) 8.Pencil Nozzle(Ford,John Deer,CAT.) 9.Common Rail Control Valve(621C,622B,625C,C7/C9,etc.) 10.Lucas Head Rotor.(DPA,DPS,DP200) 11.Diesel Fuel Injectors(Bosch,Denso,Delphi) 12.Nozzle Tester,Test Bench. 13.Other Components Related items: Caterpillar C7 INJECTOR Caterpillar C9 INJECTOR Caterpillar C10 INJECTOR Caterpillar C12 INJECTOR Caterpillar C13 INJECTOR Caterpillar C15 INJECTOR Caterpillar 3116 INJECTOR Caterpillar 3126 INJECTOR Caterpillar 3176 INJECTOR
Aotomobile maintenance, common rail injecter tester, common ail system tester, vp37, test banch.