SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
MPPT Solar charge controller Feature 1. We choose high speed and high performance 32-bit processor with excellent EMC design 2. Advanced MPPT tracking algorithm, the tracking efficiency more than 99% 3. High performance IGBT power module as electronic switch, there is no any mechanical switch, plus multiphase synchronous rectification technology, improves the stable greatly 4. Ultrafast maximum power point tracking speed to ensure tracking efficiency 5. Accurate identification and tracking of multi-peak maximum power points 6. With current-limiting charging function, charging current can be set, friendly and compatible with various capacity batteries. 7. Widely PV arraysâ?? voltage input, this can save the cost of PV combiner box, wires and construction 8. Full enclosed duct design and high-speed fan for cooling makes the controller suitable for various harsh environment 9. It shows the ambient temperature. It also has automatic temperature compensation function and RTC real time function 10. The perfect battery protection function and multi-stage charging improves battery life 11. It has the statistical function of generating capacity which is very convenient for customers to view the daily, monthly and total charging capacity of the controller. 12. Complete menu display and operation, plus the humanized design of browsing interface, these makes the operation more easy 13. It can work with GEL. LEAD-ACID, LITHIUM and other type battery 14. Twice protection function to protect battery from damage when the power switch is down (optional) 15. Standard Modbus communication protocol for RS-485 or GPRS communication to extend the communication distance (optional function)
We choose high speed and high performance 32-bit processor with excellent EMC design Advanced MPPT tracking algorithm, the tracking efficiency more than 99% High performance IGBT power module as electronic switch, there is no any mechanical switch, plus multiphase synchronous rectification technology, improves the stable greatly Ultrafast maximum power point tracking speed to ensure tracking efficiency Accurate identification and tracking of multi-peak maximum power points With current-limiting charging function, charging current can be set, friendly and compatible with various capacity batteries. Widely PV arrays voltage input, this can save the cost of PV combiner box, wires and construction Full enclosed duct design and high-speed fan for cooling makes the controller suitable for various harsh environment It shows the ambient temperature. It also has automatic temperature compensation function and RTC real time function The perfect battery protection function and multi-stage charging improves battery life It has the statistical function of generating capacity which is very convenient for customers to view the daily, monthly and total charging capacity of the controller. Complete menu display and operation, plus the humanized design of browsing interface, these makes the operation more easy It can work with GEL. LEAD-ACID, LITHIUM and other type battery Twice protection function to protect battery from damage when the power switch is down (optional) Standard Modbus communication protocol for RS-485 or GPRS communication to extend the communication distance (optional function)
Basic Information Product name Cetearyl Glucoside & Cetearyl Alcohol & Cetyl Alcohol Specifications 99% Appearance White to light yellow flake Shelf life 2 years Storage Cool Dry Place Package 1kg/bottle, 25kgs/drum. Two plastic bags inside and Paper-drums or per customer's requirements. CAS 246159-33-1 Function&Application 1.It`s vegetable based, eco-friendly, and extremely mild 2.It can be soluble in water or ethanol 3.It is compatible with both cationic and nonionic surfactants 4.It is stable below 100 5. Overall good chemical stability, excellent resistance to heat, light and pressure, strongly resistant to both acid and alkaline substances 6. Excellent thickener and emulsifier with good anti-bacterial properties Specification Item Specification Result Specification Result main fraction,% 98.00 98.66 C6 / Hydrocaebon,% 1.5 0.6 C8 / Acid Value, mg(KOH)/g 0.3 0.55 C10 / Saponification Value, mg(KOH)/g 1.0 0.27 C12 / Hydroxyl Value, mg(KOH)/g 205-230 222.96 C14 0.47 Lodine Value, (gl2/100g) 2.0 0.64 C16 71.58 Moisture,% / / C18 27.08 Hazen 30.0 20.0 C20 0.05 Melting Point, 47-55 50.3 others 0.22 Appearance White flake
PropylParaben, also called propyl p-hydroxybenzoate, E216, CAS no.94-13-3, the manufacturing process via Paraben. Propylparaben is one of a family of preservatives known as parabens, the compounds of parahydroxybenzoic acid. Function: preventing the growth of fungi. It is used as a preservative in water-based cosmetics, such as creams, lotions, shampoos and bath products. PropylParaben often used as a preservative and anti-fungal agent to prevent molding and to provide a much longer shelf life to chips, jams, jellies in food application. As an experienced PropylParaben manufacturer and supplier, we has been supplying and exporting PropylParaben for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. PropylParaben powder food grade Specification ITEM SPECIFICATIONS Characters White crystalline powder Purity (on dry base) % 98.0-102.0 Acidity (PH) 4.0-7.0 Melting point (C) 96-99 Sulfate (SO42-) 300 ppm Residue on Ignition (%) 0.10 Completeness of solution Clear and transparent Organic volatile impurities 0.5 Loss on Drying (%) 0.5
Kojic Acid, CAS number 501-30-4, is a chelation agent produced by several species of fungi, especially Aspergillus oryzae, which has the Japanese common name koji, appears as an off-white crystalline powder. It is often used on cut fruits to prevent oxidative browning, and it is also used in seafood to preserve pink and red colors. Kojic acid also has antibacterial and antifungal properties. Kojic acid also acts as both antioxidant and bleaching agents in cosmetic creams. As an experienced Kojic Acid manufacturer and supplier, we has been supplying and exporting Kojic Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Kojic Acid powder Specification ITEM STANDARD Apperance Almost White Crystalline powder Assay % 99 Melting point 152-156 Loss on drying % 1 Ignition residue 0.1 Chloride(ppm) 100 Heavy metal(ppm) 3 Arsenic (ppm) 1 Ferrum (ppm) 10 Microbiological test Bacteria: 3000CFU/gFungus: 100CFU/g
DL-Tartaric Acid, E330,CAS no.133-37-9, is a 1:1 mixture of L-Tartaric acid and D-Tartaric acid. DL Tartaric acid and its derivatives have a plethora of uses in the field of food and beverage. As an experienced DL-Tartaric Acid manufacturer and supplier, we has been supplying and exporting DL-Tartaric Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. DL-Tartaric Acid Specification Item Specification â??FCCIV/BP98 Name DL-Tartaric Acid Appearance White powder Purity(as C4H6O6) >99.7% Molecular formula C4H6O6 Melting Point 200-206�ºC Loss on drying
Ethyl Maltol, E637 CAS No.4940-11-8, is a common flavor manufactured through chemical synthesis from Maltol, available as White crystalline powder. Ethyl Maltol appears as a white crystalline powder. It is a flavoring agent with a slight sweet taste, and is commonly used to prolong the shelf life of food products. It increases flavor and sweetness in items such as in ice cream, jelly, ketchup, chocolate, candies, desserts, beverages, essences, wines, tobacco products, and other consumables. As an experienced Ethyl Maltol manufacturer and supplier, we has been supplying and exporting Ethyl Maltol for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Ethyl Maltol Specification ITEM STANDARD Appearance White crystal Solubility in ethanol colourless and clear Purity 99.2 % Melting point 89-93 Moisture 0.5 % Residue on ignition % 0.2 % Heavy metals (as Pb) 10 PPM Arsenic 1 PPM Fe 1 PPM
Maltol, E636, CAS No.118-71-8, is a natural organic compound manufactured through chemical synthesis or fermentation, available as White crystalline powder. Maltol is primarily used in the food and beverage as a flavor enhancer. Maltol is widely used as a fragrance and sweetness intensifier in foods, cigarettes, beer, ice cream, soft drinks, candy, roasted foods, pudding, and jelly. Maltol and ethyl maltol is widely used as flavour enhancer. As an experienced Maltol manufacturer and supplier, we has been supplying and exporting Maltol for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply yoMaltol Specification ITEM STANDARD Color and shape White crystalline powder Purity > 99.0 % Melting point 160-164 â?? Water < 0.5 % Residue on ignition % 0.2 % Heavy metals (as Pb) < 10 PPM Lead < 10 PPM Arsenic < 3 PPM Cadmium < 1 PPM Mercury < 1 PPMu within 1 working day.
Vanillin powder or crystal, CAS No.121-33-5, chemical formula C8H8O, food aroma and food fragrance, extract manufacturing process: isolated from vanilla bean; or chemical synthetic manufacturing process by guaiacol and glyoxylic acid. With strong vanilla perfume, Vanillin along with Ethyl Vanillin used in confectionery, ice cream, beverage, cake, chocolate, bread, biscuit and in wine. The synthetic vanillin is now used more often than natural vanilla extract as a flavoring agent in foods, beverages, and pharmaceuticals. As an experienced Vanillin manufacturer and supplier, we has been supplying and exporting Vanillin for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Vanillin powder/crystal Food grade Specification ITEM STANDARD Appearance White to pale yellow crystal like powder or crystal Odor Has a sweet, milk and vanilla aroma Solubility (25 ) 1 gram completely dissolves in 3ml 70% or 2ml 95% ethanol, and makes clear solution Purity (GC) 99.5% Min Loss on Drying 0.5% Max Melting Point () 81- 83 Arsenic (As) 3 mg/kg Mercury (Hg) 1 mg/kg Total Heavy Metals (as Pb) 10 mg/kg Residue of Ignition 0.05%
Ethyl Vanillin, CAS No.121-32-4, Chemical Formula C9H10O3, manufacturing process from chemical synthesis. Ethyl Vanillin is one of the important edible food flavors and fragrances and the raw material in food additive industry. It has full-bodied and lasting fragrance of Vanilla Beans and is 3-4 times as fragrant as Vanillin. Ethyl Vanillin is used in food, sweets, chocolate, candy, ice cream, drinks and cosmetics as fragrance fixative and additive. As an experienced Ethyl Vanillin manufacturer and supplier, we has been supplying and exporting Ethyl Vanillin for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Ethyl Vanillin food grade Specification ITEM STANDARD Appearance Fine white to slightly yellow crystal Odor Characteristic of vanilla, stronger than vanilla Solubility (25 ) 1 gram completely dissolves in 2ml 95% ethanol, and make clear solution Purity (HPLC) 99% Loss on Drying 0.5% Melting Point () 76.0- 78.0 Arsenic (As) 3 mg/kg Mercury (Hg) 1 mg/kg Total Heavy Metals (as Pb) 10 mg/kg Residue of Ignition 0.05%
Vanilla powder, CAS No.8024-06-4, manufactured through grinding of dried vanilla, available as White to light pink crystalline powder. Vanilla is widely used as aromas & perfumes. The main fragrant ingredient isolated from vanilla â?? vanillin, is also available. Vanilla appears as a white to light pink crystalline powder. It is a mixture consisting of vanillin, glucose and flavoring, blended by using scientific and novel method. Vanilla powder often used in bread, cakes, confectionery, ice cream, beverages, dairy products, and soybean milk. As an experienced Vanilla manufacturer and supplier, we has been supplying and exporting Vanilla for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Vanilla powder Specification ITEM STANDARD Appearance White to light pink crystalline powder Odor Smell strong creamy fragrances with fruit fragrances Solubility 1 gram fully soluble in 3ml 70% or 25ml 95% ethanol makes transparent solution Melting point () 87 Loss on drying (%) 10 Arsenic 3 mg/kg Total heavy metal (as pb) 10 mg/kg
Menthol Crystals, CAS No.89-78-1, food aromas, a natural spice manufactured through chemical synthesis or extraction from Peppermint Oil, available as white waxy crystalline. Menthol Crystals is widely used as aromas & perfumes. It is often used in cosmetics, salves, balms, medicated creams, throat lozenges, toothpaste, mouthwash, gum, foot sprays, pain relief, shampoos, conditioners, linaments, shaving creams, oral or throat sprays, compresses, medicated oils, and cooling gels. As an experienced Menthol Crystals manufacturer and supplier, we has been supplying and exporting Menthol Crystals for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Menthol Crystals Food grade Specification Color and Appearance: Colorless, Transparent prism-shaped or needle- like crystals Odor: Asian species with the characteristics of natural menthol Melting point: 42 44 Solubility 1g:5ml (90%) Non volatile matter: 0.05% Optical rotation(20 ) -49 -50 Purity â?¥99% As Content 3 mg/kg Heavy Metal 10 mg/kg Standard BP2004/USP29/JP14/EP6.0/CP2005/FCCV Packing In 25kg drum
Propyleneglycol alginate with best quality Cas 9005-37-2 Propyleneglycol alginate Basic information Product Name: Propyleneglycol alginate CAS: 9005-37-2 MF: (C9H14O70n MW: 0 Propyleneglycol alginate Chemical Properties Boiling point 886.32C (rough estimate) density 1.2096 (rough estimate) FEMA 2941 | PROPYLENE GLYCOL ALGINATE refractive index 1.7040 (estimate) solubility Soluble in dilute organic acids and water, forming stable, viscous, colloidal solutions at pH 3. Depending upon the degree of esterification, propylene glycol alginate is also soluble in aqueous ethanol/water mixtures containing up to 60% w/w of ethanol (95%). PH pH(1%, 25):3.5~4.5 CAS DataBase Reference 9005-37-2 EPA Substance Registry System Propylene glycol alginate (9005-37-2) Item Specifications Results Appearance White or light yellow powder Light yellow powder Degree of Esterification % 40% 86.20% Loss on drying % 20.0% 12.83% Insoluble ash% 1.0% 0.17% Viscosity 500-700 630mpa.s Particle size(80 mesh) 98% Passing rate 98% PH 2.8-4.5 3.47 Pb (mg/kg) 5.0
Specifications Analysis contents Analysis standard BP2000 Analysis results Appearance white, powder, prill, needle and with styrax benzoin smell Content%(as dry product C7H5NaO2) 99.0-100.5% 99.55% Acid and Alkalinity 0.20ml/0.1N 0.20ml/0.1N Heavy metals%( Pb) 0.001% 0.001% Loss on drying 1.5% 1.32% PH value 7.5-8.0 7.5 Total CL content 0.03 0.03 Pb mg/kg 5mg/kg 5mg/kg As mg/kg 3mg/kg 3mg/kg Hg mg/kg 1mg/kg 1mg/kg Halogenide%(Fecl3) â?¤0.02 0.02 Transparency and color According to Y6 According to Y6 Dissoluble state Passing test Passing test Polycyclic acids Passing test Passing test Fusion point C 121.5-123.5 122.8 Compound easy to be oxide Passing test Passing test 25KG/BAG,17.5TONS/FCL WITHOUT PALLETS,15TONS WITH PALLETS Packing & Shipping
Mannitol, E421, CAS No. 87-78-5, a sugar alcohol/polyol, the sweetness equivalent to sucrose 70%. Manufacturing process via the hydrogenation of fructose. It is an isomer of Sorbitol, widely used as sweetener in chewing gum with its pleasant taste and mouth feel. Characteristics: colorless crystalline powder, odor free and with sweet taste, easily dissolved in water. Function and uses as a sugar substitute for people with diabetes and in chewing gums. As an experienced Mannitol manufacturer and supplier, we has been supplying and exporting Mannitol for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Mannitol powder food grade Specification ITEM STANDARD APPEARANCE WHITE CRYSTALLINE POWDER ASSAY 98.5-101.5% WATER INSOLUBLE FREELY SOLUBLE ACID DEGREE CONFORMS LOSS ON DRYING 0.3 % MAX RESIDUE ON IGNITION 0.1% MAX REDUCING SUGARS 0.3% MAX ARSENIC 2PPM MAX NICKEL 1PPM MAX CHLORIDE 10PPM MAX SPECIFIC ROTATION +137�°-+145�° MELTING POINT 165-168â?? AEROBIC PLATE COUNT 1000cfu/g MAX COLIFORM 10MPN/100g MAX ESCHERICHIA COL 10cfu/g MAX YEAST&MOLD 10cfu/g MAX SULFATE 50PPM MAX LEAD 1PPM MAX
ButylParaben, E209, CAS no.94-26-8, food and cosmetic antioxidant/preservative, manufacturing process via chemical synthesis, 4-hydroxybenzoic acid (Paraben) and 1-butanol as raw materials. ButylParaben used as an antifungal agent in food active against molds and yeasts, and less active against bacteria. Butylparaben is in the paraben family (Ethylparaben, Methylparaben Propylparaben) of preservatives used by the food, pharmaceutical, and personal care product industries. As an experienced ButylParaben manufacturer and supplier, we has been supplying and exporting ButylParaben for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. ButylParaben powder Specification ITEM SPECIFICATIONS Preperty: White crystalline powder Content %: 99.0 Melting Point C: 67-72 Loss in dry,% 0.5 Acid degree: qualified Sulfate (counted by SO42-),% 0.024 4-Hydroxybenzoic acid and Salicylic acid Qualified AS,%: 0.0003 Heavy metal (count by Pb),%: 0.001 Remain in burning % 0.1
EthylParaben, E214, CAS number 120-47-8, food and cosmetic antioxidant/preservative, manufacturing process via chemical synthesis, 4-hydroxybenzoic acid (Paraben) and ethyl alcohol as raw materials. Butylparaben is in the paraben family (ButylParaben, Methylparaben Propylparaben) of preservatives used as an anti-fungal preservative in baked goods, creams and pastes, jams and jellies, syrups, processed vegetables, oils, seasonings, dairy products, beverages and skin care products. As an experienced EthylParaben manufacturer and supplier, we has been supplying and exporting EthylParaben for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. EthylParaben powder Specification ITEM SPECIFICATION Characters Colorless crystals or white crystalline powder Purity (on dry base) % 99.0-100.5% Melting Point 115-118 Acidity qualified Sulfate(SO42-) % / Heavy Metal (Pb) % / Heavy Metal(AS) % / Loss on Drying % 0.50 Residue % 0.10 p-Hydroxybenzoic Acid and Salicylic Acid / Appearance of Solution Clear Identification / Related Substances qualified Organic Volatile impurities /
