Increases fuel average of the engine by 30 to 60% Guaranteed Eco-friendly, 100% Herbal Multi fuel multi functional bio additive for petrol vehicles Removes carbon from engine hence reduces friction Removes black smoke by 80% Reduces engine noise 20% resulting smoother rides Saves petrol vaporization 5% - 10% Increases engine power and torque by 20% Smooth drive quick without knocking noise, backfire, delay time chain etc. Totally prevents corrosion in fuel tank & cleans fuel supply in carburetor
Bio Mileager Premium 20W-40 is premium quality multigrade engine oils are formulated to meet the special requirements of high performance 4 stroke, two and three wheelers. It provides total engine protection viz. protection from rust, corrosion, high temperature, wear & tear etc.
Bio Mileager Front Fork Oil is a highly stable suspension oil for maintaining consistent fork operation.
Bio Mileager Thanda Cool Oil is a herbal additive based anti-freeze containing inhibitors providing protection from freezing, overheating, rust and corrosion.
â?¢ Bio Mileager Type A Gear Oil is a premium quality red dyed transmission oil having a low coefficient of friction
Bio Mileager UTTF Gear Oil is a premium quality transmission oil, blended from high quality solvent refined base stocks fortified with carefully selected additives, to give good detergent, thermal and oxidation stability, low temperature fluidity, seal compatibility, antifoam, anticorrosion and antiwear characteristics.
Exceptional anti corrosion and rust preventative.. Stable milky emulsions with water having hardness up to 400-800 PPM. Highly satisfactory dissipation and cooling properties resulting in excellent surface finishes and longer tool life. Do not contain ingredients harmful to operation. Better hard water stability with superior cast iron corrosion test results.
â?¢ To ensure reliable performance of heat transfer system proper selection of thermic fluid is very important. Bio Mileager Heat Transfer Oil having good characteristics of thermal transmission.
Lithium hydroxide CAS No. : 1310-65-2 Other Names : lithium hydrate MF : LiOH.H2O, LiOH EINECS No. : 215-183-4 Purity : 56.5% Appearance : White Powder Application : lubricating greases, batteries etc Color : White Sample : Available Apperance : Powder Mp : 462 C Density : 1.43 Water Solubility:Water Solubility: 113 g/L (20 C) lithium hydroxide Lithium hydroxide CAS 1310-65-2 Usage 1. It is mainly used as raw material for preparing lithium compounds. It can also be used in metallurgy, petroleum, glass, ceramics and other industries. 2. It is used to make lithium salt and lithium grease, electrolyte of alkaline battery, absorption liquid of lithium bromide refrigerator, etc
Prime tallow (extra fancy) F.F.A : 2% max F.A.C : 3-5% max M.I.U : 1% max Titre : 41.5 C min Bleach : 0.5 red max Prime tallow (top white) F.F.A : 2-5% F.A.C :1-3% max M.I.U : 1% max Titre : 41.5 C min Good tallow (fancy) F.F.A : 2-5% max F.A.C : 11A/11B max M.I.U : 1% max Titre : 41.5 C min Bleach : 1.0 red max Bleachable tallow F.F.A : 4% max F.A.C : 19/21Max M.I.U : 1% max Titre : 41.5 C min Bleach : 1.5 red max Unbleachable tallow F.F.A : 10% max F.A.C : 21/23 max M.I.U : 1% max Titre : 41.5 C min Refined yellow grease F.F.A : 10% max F.A.C : 21 max M.I.U : 2% max Titre : 38.0 C min Yellow grease (crude) F.F.A:10% max F.A.C:21 max M.I.U:7% max Titre:38.0 C min Low gut tallow F.F.A : 60% max F.A.C : 45 max M.I.U : 3% max Titre : 40.0 C min
Prime tallow (extra fancy) F.F.A :2% max F.A.C : 3-5% max M.I.U : 1% max Titre : 41.5 C min Bleach : 0.5 red max Prime tallow (top white) F.F.A : 2-5% F.A.C : 1-3% max M.I.U : 1% max Titre : 41.5 C min Good tallow (fancy) F.F.A:2-5% max F.A.C:11A/11B max M.I.U:1% max Titre:41.5 C min Bleach:1.0 red max Bleachable tallow F.F.A:4% max F.A.C:19/21Max M.I.U:1% max Titre:41.5 C min Bleach:1.5 red max Unbleachable tallow F.F.A:10% max F.A.C:21/23 max M.I.U:1% max Titre:41.5 C min Refined yellow grease F.F.A:10% max F.A.C:21 max M.I.U:2% max Titre:38.0 C min Yellow grease (crude) F.F.A:10% max F.A.C:21 max M.I.U:7% max Titre:38.0 C min Low gut tallow F.F.A:60% max F.A.C:45 max M.I.U:3% max Titre:40.0 C min
We are interested in supplying quality DUDU OSUN and Raw African Black Soap for smooth skins and acti-bacterial,anti-ageing qualities among others.It is also used as a natural shampoo to eliminate dry itchy scalp. We have 48 pieces per Carton , we can supply up to 500 Cartons per month if needed directly from the factory. The DUDU OSUN and Raw African Black Soap is made traditionally from pure natural ingredients and herbs from the tropical rain forest and savannah regions. It has No Artificial Colours , No Preservatives ,and Bio-Degradable. The soap is all organic and can be used on all skin types as it smoothens the skin and also acts as an anti-bacterial and anti-ageing products. QUANTITY: We have 45,000 pcs/Month Available Delivery:2-3 Days After Confirmation Of Order
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
FOB $250/MT MOQ 22MT Our used engine oil is 100% from vehicles workshop, and that is the reason is higher quality as compared to a supplier who mixed vehicles and factory used engine oil, and that is the reason we have max ability to supply only 2000 mt per month, as we try to keep the quality at the highest in its grade. The contract specs are as below, however in reality it's better as you can see in our latest lab test result in the attached picture. 1) Water : +/- 2% 2) Gross calorific Value : Min 10 000 Kcal 3) Sulfur content : Max 0.
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
SHUTTERINGOIL Applied by spraying guns, rollers or by brushes prior to pouring aerated concrete and are recommended for use as a concrete mould release agent with the protection of moulds from rust. APPLICATION \' It is used for prevents sticking of formwork to concrete, allowing easy stripping of formwork after harder�±ng of concrete. , BENEFITS It helps easy removal of the shuttering at time of deshuttering the member whereas the oil must be of good condition. It helps in the repetative use of plywood for more project. It make a thin layer between the plywood and concrete which help in reducing of adhesion in the inner surface.
LOOMOIL Generally suggested for non-critical all loss lubrication systems of textile and other looms which do not require additive containing oil. APPLICATION Non-critical all loss lubrication systems of textile and other looms which do not require additive containing oil. BENEFITS They perform well both for boundary as well as full fluid lubrication conditions. They allow for good ageing resistance. They allow for good ageing resistance. With their good anti-rusting properties, they are good for use under a wide range of temperatures and stress.
RUST PREVENTIVE OIL Rust preventive oils are used to protect components previously exposed to water containing machines and grinding coolants, cleaners or water rinses. APPLICATION Protect metal surfaces and parts before, during, and after the machining process and when stored indoors. BENEFITS Non-staining and are easily applicably by brush, spray or swab These are water displaced. This obviates the need for specially drying parts to be protected.
CUTTINGOIL Provide lubrication to the cutting tool and work piece, u hich helps to improve the movement of the tool and reduce wear and tear on the machinery. APPLICATION Provide lubrication to the cutting tool and work piece, which helps to improve the movement of the tool and reduce wear and tear on the machinery. BENEFITS Low energy costs. The cooling feature of the cutting fluid and its lubrication effect is essential in lowering energy costs. Prevents rust and corrosion. Clears metal chips and debris. Reduces metal to metal contact. Limits residue formation.