SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
We, JiwooHoldings Inc is a seller mandate of Drained-Acid battery scrap in Korea. Battery scrap origin is US and seller drained acid in Korea factory, We can supply outter case crushed(Rails) scrap as well. Suppliable Capacity is 500~5,000ton per month and MOQ is 500tons, if you have interested, Please feel free to contact me anytime.
Power semiconductors, like diodes, thyristors, modules, bridge rectifiers, rotating assemblies, surge suppressors for inverters, ups, battery chargers, furnaces, dc drives, apfc panel, eot cranes, welding machines, etc.
Wireless charger, batteries power bank, dust sensor, optical disc drive, tof, lidar, ar glass.
A Christmas tree is an assembly of valves, spools and fittings used for oil, gas, water injection, water disposal, gas injection, condensate and other types of wells Christmas Tree consists of chokes, valves and spools. The main purpose of christmas tree is to control the flow of well fluids or gas during production. Additional functions of christmas tree include pressure relief, chemical injection, a conduit for control systems to monitor and control safety valves in down-hole For price,specification etc please contact us
BOP Accumulator Units meet or exceed the design specification as specified in API 16D. Each control system is specifically engineered to assure reliable control of the BOP stack with adequate reserve for continuous operation under emergency conditions. For price and specification please contact us.
These are used in oil and gas drilling industries and other industries also- Spotting Fluid Weighted Spotting Fluid Non Weighted. Payment Term - LC For price and specification, please contact us
Electrical materials, electrical equipments, lighting fixtures, plumbing materials, ac materials, it materials, ceiling materials, partition materials, painting materials, floor tiles, hardware materials, hand tools & power tools, garage tools, wooden & carpenter materials, batteries. medical equipment and medical consumable product and medical surgical equipment..
Copper cathode, copper wire scrap, sunflower oil, soybeans seeds, used rails, palm oil, urea 46% nitrogen granular, white corn, sisal fiber, cashew nut, sesame seed, hardwood charcoal, a4 paper icumsa 45 sugar, wood pellets, paper scrap, used engines, yamaha cardboard engines, pet bittle scrap, almond nuts, pistachio nuts, battery scrap, computer scrap, phone scrap, beef meat, goat meat, lamb meat, wet salted cow, cocoa, arabica coffee.
Couplings, gearbox, valves, pumps, bearings, conveyor systems, pipes & fittings, automation drives electrical items, rtd, cables, switchgears, transformers, measuring instruments, drilling machines. ball valves, gate valves, globe valves, butterfly valves, diaphragm valves, waffle valves, sluice valves, hydraulic valves, pneumatic valves, solenoid valves, bellow seal valves, check valves in stainless steel, ss 304, ss 316, brass, m.s, cast iron, cast steel, pvc, nylon, teflon, ceramic lining valves. fittings: flanges, elbows, tee, couplers, nipples. bearings, v belts, couplings: gear couplings, pin bush couplings,pulleys.Export, clearance, door delivery, import, automations, maintenance, retro fitting, installations
NZG31 Petrol Engine Rail Drilling Machine This machine is an indispensable tool for railway maintenance construction and emergency repair operations It uses a hollow drill bit a screw nut clamping mechanism with quick opening function fast clamping accurate positioning fast drilling simple operation and safety use Place of Origin Hubei China Type Rail drilling Machine Material Stainless Steel Dimensions L x W x H mm 800340400 mm Brand Name Linkage Product name Rail Cutting Machine Place of Origin Hubei Idle Rev 270rmin Borehole diameter 9836mm Power of petrol engine 12kW Spindle RPM 250 285 rmin Drilling time 25s Specification linear velocity 400 32 4 70m s Engine type fourstroke petrol engineHonda weight 17kg
Place of Origin Hubei, China Type Other Material alumunium Dimensions (L x W x H) (mm) 300*300*150mm Brand Name Linkage Product name Railway track maintenance equipment Usage petrol Rail Drilling Machine Application petrol Rail Drilling Machine Standard crcc Quality Control iso Certificate CE Warranty 1YEAR Customize yes Model NZG-31 Engine GX50 4-stroke petrol engine, air-cooled. Power 1.47kW Spindle revolution 7000r/min Fuel tank capacity 0.63L drilling time 40s/hole
So Klin Biomatic Product of Wings Indonesia It is the washing expert detergent powder that fit for all kinds of washing machines. The detergent with special formula that come with Bio-Enzyme give effective and efficient power in removing stains yet protecting the fabric. Sit back & relax with simple and effective detergent powder. There are 2 different variants available to cater special to your washing machines So Klin Biomatic Blue : Create less foam that perfectly suitable for both Front Loading washing machines and Top Loading washing machines. So Klin Biomatic Green: Come with special formulation that suitable best for Top Loading washing machines. So Klin Biomatic comes with 8 special features: Enzyme : For effective cleaning power in removing stains Anti Re-deposition : To protecting the clothes from stains. Color Guard : To protect and lock the color vibrant of your lovely clothes. Non- ionic Tenside : Protecting your skins from Allergic and Irritation Free. Concentrate Formula : Value for money with more wash Low Foam : Friendly to your machine and environment. Bright Activator : Gives your clothes a brighter look as if as new clothes. Save & Efficient : Safe and efficient for washing machine Anti-bacterial formula
Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability.
This Internal Combustion Rail Drilling Machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, fast clamping, accurate positioning, fast drilling, simple operation and safety use.The rail clamping device has self-locking function, and high drilling precision. The hollow drill bit is used, and special twist drills below �?13.5 can also be clamped according to needs. It has automatic water supply function when drilling, and is suitable for maintenance, emergency repair and overhaul operations in public works departments. Weight 23kg Dimensions (L x W x H) (mm) 668�?340�?425ï¼?mmï¼? Place of Origin China Engine Petrol engine :Honda GX50 1.47kW single cylinder,4stroke, forced air colling Displacement 47.9ml Speed 7000rmp Fuel tank capacity 0.63L Max drilling diameter 36mm Drill time â?¤30s Spindle speed at full load 292r/min Drill rod size weldon 19
Paper for the printing industry, woodfree offset paper 45 150gsm, white/color bond paper 45 80gsm, white drawing paper 70 150gsm, color printing paper 45 120gsm, carbonless base paper 42 60gsm, carbonless copy paper 48 80gsm, cast coated paper 75 350gsm, color paper cover 15 180gsm, self adhesive paper 170 190gsm, art paper 80 450gsm, computer forms, office continuous paper, fax paper/cashier paper, thermal paper 48 180gsm, newsprint paper 45 60gsm used forklift used trucks use forklift batteries.Manufacturer and distributor of european print papers.
Solar products, solar appliances, home appliances, electric appliances, lithium battery, gel battery, hybrid inverter, solar lights, solar accessories, solar fan, power inverter, electric cooker, led tv, solar power station.
1. Semiconductor / display material, part, equipment 2. electrical/electronic material, part, equipment 3. medical / biomaterial, equipment 4. machine metal part 5. chemical materials 6. power parts 7. car parts 8. cosmetic 9. consumer goods.Consulting and advisory services: offering expertise and support for businesses engaging in international trade, such as compliance with trade regulations, market entry strategies, and risk management.
