SR2611-2S-S2R+ is an internal (6Gbps) RAID module designed in 2 of 5.25� CD-ROM bay to satisfy the demands of SMB and industrial computing environment. With LCD tents leaving you to easily grasp HDD status. SR2611-2S-S2R+ accommodates 2 of 3.5 � SATA III hard drive and offering both RAID 0 and RAID 1 functions . Uses the RAID 0 function to integrate the capacity of two hard drives and to enhance both read & write performance. On the other hand, uses RAID 1 function for data redundancy by mirroring data among both hard drives to prevent the event of a hard drive failure causes system shutdown. Model No SR2611-2S-S2R+ Drive Bay 2 CDRom DriveBay Drive Fit 2.5"/3.5" SATA III HDD x 2 Host Interface SATA III Connector (7Pin) RAID Level RAID 0 / RAID 1 Hot-Swap RAID 1 Power Supply 15 PIN Power Connector x1, BIG 4Pin Connector x 1 Engineering Configuration Port RS232 Status Display LCD Display Cooling Fan 6cm Fan Buzzer Alarm Yes Environment Detector Fan Failure / Overheat Dimension & Weight 146 ( W ) x 196 ( L ) x 85 ( H ) mm / 1.3 KG Certifications CE / FCC Operating System Windows, Linux Function Control Interface GUI (Windows Only) Packing Content SATA Cable�Internal RS232 Cable�External RS232 Cable�Accessory Kit HDD Capacity Single HDD tested up to 8TB RAID 0 Operating temperature 32° to 104° F (0° to 40° C) Storage temperature 32° to 104° F (0° to 40° C) Relative humidity 5% to 95% noncondensing
iR2022 accommodates 2 of 2.5SATA III hard drive and offering both RAID 0 and RAID 1 functions . Uses the RAID 0 function to integrate the capacity of one hard drives and to enhance both read & write performance. On the other hand, uses RAID 1 function for data redundancy by mirroring data among both hard drives to prevent the event of a hard drive failure causes system shutdown. Model No: iR2022 Interfaces: 7+15-pin SATA III (6.0Gb/s) Port Compatible Drives: 2.5 SATA III, II, I HDD/SSD (x2) Raid Level: RAID 0 / RAID 1 System Monitoring: Fan Failure, Overheat. HDD/SSD Failure Cooling System: 4 cm Low Noise Fan Operating System: Windows, Linux Function Control Interface: GUI (Windows Only)
The RAIDON iR2623-S3 is a fault-tolerant hard disk array which is easy to install and hot-swappable allowing drives to be replaced while the power is on. It is suitable for applications such as professional workstations, file servers and as real-time backup storage systems. The iR2623-S3â??s disk array is made up of two 3.5" hard disks, augmented by a 2.5" hard disk or SSD extractable tray with a separate SATA interface to diversify usage. The iR2623-S3 is a dual function storage device, offering data security and removable storage for on the go data transport. Model No iR2623-S3 Interfaces 6Gbps SATA III 1 Ports ( 3.5" RAID Module ) / 6Gbps SATA III 1 Ports ( 2.5" HDD/SSD ) Compatible Drive 2 x 2.5"/3.5" SATA III (6.0 Gbits) HDD/SSD + 1 x 2.5" SATA III (6.0 Gbits) HDD/SSD Storage Mode RAID 1 or RAID 0 ( 3.5" RAID Module ) +Independent volume( 2.5" HDD/SSD ) Operating System Windows, Linux Function Control Interface GUI (Windows Only) Electrical and Operating Requirements * Line voltage: 12V + 5V DC * Maximum continuous power: 60W * Operating temperature: 32° to 104° F (0° to 40° C) * Storage temperature: -4° to 116° F (-20° to 47° C) * Relative humidity: 5% to 95% noncondensing Size and Weight 148 mm (W) x 84 mm (H) x 202 mm (D) , 1.2 Kg Product Code EAN:4711132864984 UPC:884826503668 Carton 8 pcs per carton Package Accessories * iR2623-S3 x 1 * SATA Cable x 2 * Internal RS232 cable x 1 * External RS232 cable x 1 * Accessory kit * Quick Installation Guide
iT4300-U6 is a 4 bays internal storage solution for 5.25-inch CD-ROM. Using the JBOD function enables you to store the operating system and data file in different hard disk space. The advantage of storage distribution can help to enhance the performance of system operation. RAIDON also delivers iT4300-U6 with only JBOD function to SAS interface, users may collocate a RAID card whenever is necessary to upgrade to a RAID storage for desired applications. Model no. iT4300-U6 Interface SFF-8643 miniSAS 12Gbps Port Support Hard Drive 4x 2.5� SAS/SATA HDD/SSD RAID Level JBOD Cooling Fan 4 cm Power Supply 15-pin Power Connector LED Indicators Yes Operating System Windows, Linux Certification CE & FCC Packing Content Quick Installation Guide� Accessory Kit�Key� MiniSAS 12Gbps Internal Cable Dimension 146(W)x 42(H) x 153(L) mm Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing
iT4300-U5 is a 4 bays internal storage solution for 5.25-inch CD-ROM. Using the JBOD function enables you to store the operating system and data file in different hard disk space. The advantage of storage distribution can help to enhance the performance of system operation. RAIDON also delivers iT4300-U5 with only JBOD function to SAS 6G interface, users may collocate a RAID card whenever is necessary to upgrade to a RAID storage for desired applications. Model no. iT4300-U5 Interface MiniSAS Support Hard Drive 2.5" SAS / SATA HDD x 4 RAID Level JBOD The Largest Capacity 2TB Cooling Fan 4 cm Power Supply 15-pin Power Connector LED Indicators Yes Operating System Windows, Linux Certification CE & FCC Packing Content Quick Installation Guide�Accessory Kit�Key�Mini SAS 6G Internal Cable Dimension 146(W)x 42(H) x 153(L) mm Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing
Price: Approx. Rs 225 / Piece Product Details: Brand Probizz Padlock Size 65 mm Padlock Type With Key Lock Shackle Type Normal Ideal For Door Packaging Size 10 - 20 Pieces Finish Type Stainless Steel Color Silver Security lock of high quality and resistance. Pack of 2 padlocks. It has a pin with a diameter of 9 mm for closing the padlock. External measurements: 50 x 75 x 20 mm (width x height x depth). Interior (closed): 23 x 30 x 20 mm (width x height x depth) Includes 3 keys for opening and closing. Made of hardened steel of high resistance.
1) Mortise Locks 2) Pad Locks 3) Cam Locks 4) Safe Locks 5) Furniture Locks 6) Euro Cylinder Locks 7) Multipurpose Locks 8) Pin Locks 9) Door Locks 10) Night Latch Locks 11) Door Handles 12) Pull Handles 13) Mortise Handles 14) Glass Handles 15) Cabinet Handles 16) Door And Cabinet Konbs 17) Wall Hooks 18) Coat Hooks 19) Door Fittings 20) Hinges 21) Tower Bolt 22) Furniture Hinges 23) Aldrops 24) Door Knowcker 25) Door Stopper 26) Door Closer 27) Bathroom Fittings
ST2760 is a internal JBOD module, which supports two 2.5� SATA hard drive, you can store the operating system and data file in different hard drive or use it with a RAID card. It is designed to has the same dimension as one 3.5� hard drive or one floppy size, this allows you to install ST2760 in the mini-Server, Surveillance Server, 1U Server, eMail Server and POS System that has limited space. ST2760 can help you to save the problem of requiring larger capacity but with limited space. Model No ST2760-2S-S2 Drive Bay 3.5" Floppy DriveBay Drive Fit 2.5" SATA III HDD x 2 (9.5mm thickness) RAID Level JBOD Host Interface SATA III Connector (7Pin) x2 Power Supply SATA Connector (15Pin) HDD Access Indicator LED Color Matt Black Structure Metal Body Dimensions 101.7W x 147L x 25.8H(mm) Weight 0.4(kg) Certifications CE & FCC Operating System Support Windows, Linux Packing Content Accessory Kit HDD Capacity Single HDD tested up to 2TB Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing
iT4300-S3 is an 4 bays internal storage solution for 5.25-inch CD-ROM. Using the JBOD function enables you to store the operating system and data file in different hard disk space. The advantage of storage distribution can help to enhance the performance of system operation. RAIDON also delivers iT4300-S3 with only JBOD function to mini SAS to 4*SATA cable, users may collocate a RAID card whenever is necessary to upgrade to a RAID storage for desired applications. Model no. iT4300-S3 Interface miniSAS 6G TO 4 Port SATA Support Hard Drive 4x 2.5" SATA SSD/HDD(15mm) RAID Level JBOD System Monitoring Fan Failure / Overheat (alarm) The Largest Capacity 2TB Cooling Fan 4 cm Power Supply 15-pin Power Connector LED Indicators Yes Operating System Windows 7 or above, Linux Certification CE & FCC Product Code EAN:4711132864434 UPC:884826503576 Packing Content iT4300-S3 (with removable drive tray enclosed x 4), Quick Installation Guide, Screws & Keys, miniSAS 6G TO 4 Port SATA Internal Cable Dimension 146(W)x 42(H) x 153(L) mm Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing
iR4300-S2 is built in the RAID features which protects your data from HDD/SSD damage. Its RAID 5 feature provides you an affordable cost in leveraging your mass data base. iR4300-S2 provides multiple storage options. With RAID 5, a user will have the maximum protection of his/her data with allowance for a single drive failure but yet all data will be kept intact. In the RAID 0 mode, a user will have the benefit of a single massive volume for storage with high I/O speed, with sets of data being striped across the four enclosed drives. Model no. iR4300-S2 Interface 1x SATA II (3Gbps) Support Hard Drive 4x 2.5" SATA SSD/HDD(15mm) RAID Level RAID 0/1/3/5/clone/JBOD Cooling Fan 4 cm Power Supply 15-pin Power Connector LED Indicators Yes System Monitoring Fan Failure / Overheat (alarm) Operating System Windows 7 or above, Linux Certification CE & FCC Product Code EAN:4713227440127 UPC:884826504306 Packing Content iR4300-S2 (with removable drive tray enclosed x 4), Quick Installation Guide, Screws & Keys, SATA Cable, Dimension 146(W)x 42(H) x 153(L) mm Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing
GR3660-TB2 supports Thunderbolt 2.0 (TB2) interface for an extreme high data transfer speed. And both of the two TB2 ports are equipped with up to 20Gb/s data transfer rate which is 4 times faster than USB3.0 and even 3+ times than SATA III interfaces. You could definitely use it to play your 4Khigh-resolution films with no any lagging hassle. TB2 interface not only brings you this high data transfer rate advantage, it also let you chain maximum up to another 6 more GR3660-TB2 products (or other compatible storage products). While using PhotoShop or Lightroom Photo Editing software, you, as a professional photographer or the hobbyist, could use your GR3660-TB2 with 2.5" SSDs to help managing your huge photo library. Your RAID 1 data protection and fast data transfer rate could definitely help could definitely help you to keep your RAW files and their finished photos. Model No GR3660-TB2 Interfaces Thunderbolt 2 Port x 2 ( up to 20 Gbps ) Compatible Drive 2 x 3.5" /2.5" SATA HDD/SSD ( up to 6 Gbps ) / Support large volume up to 10TB Storage Mode 2 x Independent ( JBOD ) / RAID 0 / RAID 1 Cooling System 4 cm Low noise fan Operating System Windows, Linux, Mac Electrical and Operating Requirements * Line voltage: 100-240V AC * Frequency: 50Hz to 60Hz, single phase * Operating temperature: 32° to 104° F (0° to 40° C) * Storage temperature: -4° to 113° F (-20° to 45° C) * Relative humidity: 5% to 95% noncondensing Size and Weight Height: 122 mm Width: 63 mm Depth: 244 mm Weight: 1.2 kg Product Code EAN�4713227440042 UPC�884826504221 Carton 8 pcs per carton Package Accessories * GR3660-TB2 Product Unit x1(Removable Tray x2) * Thunderbolt Cable x 1 * Power Cord x1 * CD x1 * Foot Pad x4 * AC/DC Adapter x1 * Quick Installation Guide x1
LED indoor lighting & outdoor lighting, such as LED 4 pins tube light, LED plug light, LED T5 tube light, LED T8 tube light, LED circline tube light, LED ceiling light, LED down light, LED track light, LED pendent light, LED panel light, LED spot light, LED candle light, LED bulb light, LED corn light, LED R7S light, LED flood light, LED high bay light, LED strip light, LED module light, LED torch light, LED grow light, LED fresh light.
Detailed Product Description XD-PICTURE CARD Features: 1. Interface: 10-pin serial memory stick interface and 4-pin parallel 2. Operating voltage: 2.7 - 3.6V 3. Temperature: 0 - 55fpC (operation) -20 - 65fpC (storage) 4. Power consumption (parallel): 100mAh (max.) 5. Power consumption (serial): 65mAh (max.) 6. Maximum read speed: 4Mbps 7. Maximum write speed: 2.5Mbps 8. Dimensions (approx.): 20 x 25 x 1.7mm 9. Weight (approx.): 2g OEM is warmly welcome. Lifetime Limited Warranty: 1 year warranty. Terms of Payment: T/T or Western Union Minimum Order: 50 Piece/Pieces Packaging: Gift boxes, Blister Packing, Plastic boxes Detailed Product Description Memory Stick PRO Duo: Capacity: 256MB -- 8GB Features: 1.Interface: 10-pin serial memory stick interface and 4-pin parallel 2.Operating voltage: 2.7 - 3.6V 3.Power consumption (parallel): 100mA (max.) 4.Power consumption (serial): 65mA (max.) 5.Minimum Write Speed: 15 Mbps on Memory Stick PRO Duo 6.Transfer speed: 80Mbps (under optimal conditions) 7. Dimensions (approx.): 0. 79 x 1. 22 x 0. 06" (20 x 31 x 1. 6mm) 8.Weight (approx.): 0.07oz. (2g) 9.Operating temperature: -13 ~ 185fpF (-10.56 ~ 85fpC) 10.Included Accessories: Memory Stick Duo Adapter and Storage Case OEM is warmly welcome. Lifetime Limited Warranty: 1 year warranty.
1. Suitable for various modules and multimedia interfaces 2. Radian appearance makes it more slinky 3. Embedded chart and logo position make it easy to identity 4. With position of inserted graph and label for convenient distinction. 1.12 years working experience. 2. OEM design is available. 3.PE Package
125mm*125mm Mono- Crystalline Solar Module from PEAK POWER 20W-60w NO. of cells and connections 36.
Schools management system, that works with PC, palms, pocket pcs, fax, scanners, rfid, fingerprint and code readers and provides parent communication in 30 languages.Add-on modules, software, interface and applications developer for sale (or rent) with maintenance
ZXM400 is an interface module card of simulation telephone, which can support 4 Line simulations outside-line, and FXO can make up with FXS freely. It meets the flexible demands of small and medium-sized enterprises, and ití»s the most popular and use cards of Asterisk. It can the rate of compatible for Digiumí»s TDM400P is 100%. The user can use the driver of totally the same as ZAPTEL and Astresik software without revise any software codes Inner box 190*155*45 G.W/unit(kg) 0.1
Product description: Dr18 module power connectors are special products for interface of module, completely replaceable with the same type products of elcon. The advanced technology crown spring is used in these connectors to enable high dynamic contacting reliability. This product parts are plated with silver or golden, the plug is installed with pin, and the socket is installed with jack. The optional termination styles including pressure welding(y), welding (h), and plate welding (pcb ). There three basic types provided for pins: postmate, standard, premate to satisfy the customers different requirements and we could make it according to per customer's requirement. Product feature: The product adopts advanced technology crown spring as contact, and used beryllium which has high flexibility and high intensity, it is smooth contact side, and avoids damaging when insert and extract, in the meaning time ensures largest contact size, the advantages of this connector is low resistance , small temperature rise. Endurance of vibration to shock and high dynamic contact reliability. Product specifications Contact materials: brass, beryllium, and gold-plated, silver-plated on surface. Housing materials: ge pbt 420seo (black) Mechanical endurance:,161;y1000times Rated current:20,5a¡ê,172;12,35a Contact resistance¡êo20,,161;¨¹5m|,184;¡ê,172;12,,161;¨¹1m|,184; Withstanding voltage¡êo20,,161;y1000vac, 12,,161;y2000vac Insulation resistance: 20,,161;y3000m|,184;, 12,,161;y3000m|,184; Available contacts: size ,20 ,161;¨¢ 11 contacts Size ,12 ,161;¨¢ 7 contacts Other information: If you are interested in our products or have some available suggestions, please feel free to contact us, thanks. According to standard requirements
Driver: M100 Category: Standard Display Color: 65K color TFT HMI Size (inch) : 3.5 Display Scale: 4:3 Resolution: 320xRGBx240 Brightness: Typical brightness 250 nit; 64 level back light brightness adjustment using software Viewing Angle (L/R/U/D): 60/60/50/55 Memory Space (Flash): 128MB or 1GB Input Power Voltage (V): 4.5-26 Power Consumption (W): 1.0 Interface: Serial Mode: Universal asynchronous receiver/transmitter (UART), 8N1 mode( 1 start bit, 1 stop bit,8 data bits, no parity bit), baud rate:1200-115200bps. USB Interface: No Touch Panel: 4 line resistance Touch panel LCD (DMT32240S035_01WT) Key-board Interface: 4*4 Matrix Keyboard interface Video Interface: No Real-time Clock (RTC) (Backup battery): No.
Technical specification: Drive Module: M100 Series: Basic Display Color: 65K color TFT HMI Size (inch) : 4.3 Display Scale: 16:9 Resolution: 480xRGBx272 Brightness: Typical brightness 300 nit; 64 level back light brightness adjustment using software Viewing Angle (L/R/U/D): 75/75/60/70 Memory Space (Flash): 128MB or 1 GB Input Power Voltage (V): 4.5-6 Power Consumption (W): 1.5 Interface: Serial Mode: Universal asynchronous receiver/transmitter (UART), 8N1 mode (1 start bit, 1 stop bit,8 data bits, no parity bit), baud rate:1200-115200bps. baud rate adjustment available by software setting. USB Interface: No Touch Panel: 4 line resistance touch panel LCD Key-board Interface: 4*4 Matrix Keyboard interface Video Interface: No Real-time Clock (RTC) (Backup battery): Support Gregorian calendar and lunar calendar RTC(2000-2099) Dimension Viewing Area Size: 95.0 (w)*53.9(h) mm Dimensions: 121.9 (w)*74.7(h) *14.0 (N/K)/16.0(T)(t) mm Net Weight: 130g Working Environment Working Temperature: -20-- +70 Storage Temperature: -30--+80 High Temperature: 60 degree @90% RH Command Set All modules are using one unified instruction set. Dimensions: 121.9 (w)*74.7(h) *14.0 (N/K)/16.0(T)(t) mm.
