904L (N08904, 1.4539) super austenitic stainless steel contains 14.0-18.0% chromium, 24.0-26.0% nickel and 4.5% molybdenum. 904L super austenitic stainless steel is a low carbon high nickel, molybdenum austenitic stainless acid resistant steel. It has very good activation-passivation transformation ability, excellent corrosion resistance, good corrosion resistance in non-oxidizing acids such as sulfuric acid, acetic acid, formic acid, phosphoric acid, and good corrosion resistance in neutral chloride ion-containing media. Excellent pitting corrosion resistance, good crevice corrosion resistance and stress corrosion resistance. It is suitable for sulfuric acid of various concentrations below 70�¯�¿�½?�?�°C, and has good corrosion resistance against acetic acid of any concentration and temperature under normal pressure, and the mixed acid of formic acid and acetic acid. Here are some of the most common international standards for 904L stainless steel: ASTM A240/A240M: Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications ASTM A276/A276M: Standard Specification for Stainless Steel Bars and Shapes ASTM A312/A312M: Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes ASTM B625/B625M: Standard Specification for UNS N08925, UNS N08031, UNS N08034, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip EN 1.4539: European standard for austenitic stainless steel with high molybdenum content EN 10028-7: Flat products made of steels for pressure purposes - Part 7: Stainless steels EN 10216-5: Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes EN 10217-7: Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes JIS G4304: Hot-rolled stainless steel plate, sheet and strip JIS G4305: Cold-rolled stainless steel plate, sheet and strip JIS G4312: Heat-resisting steel plate, sheet and strip GB/T 3280: Cold rolled stainless steel plate, sheet and strip GB/T 4237: Hot rolled stainless steel plate, sheet and strip GB/T 24511: Stainless steel and heat-resisting steel plate, sheet and strip for pressure equipments We can provide the following form:904L stainless steel coil; 904L stainless stee strip;904L stainless stee plate; 904L stainless steel sheets; 904L stainless steel tubes; 904L stainless steel pipe;904L stainless steel flat; 904L stainless steel bar
Classification: Adipic Acid CAS No.: 124-04-9 Other Names: Adipic Acid MF: C6H10O4 EINECS No.: 204-673-3 Place of Origin: Shandong, China Grade Standard: Agriculture Grade, Electron Grade, Industrial Grade, Reagent Grade Purity: â?¥99.7, 99.8% Appearance: white crystalline powder Application: Nylon,engineering plastics, PU, RESIN Brand Name: AOJIN Model Number: AJ-adipic acid Usage: Leather Tanning Industry Certificate: COA MSDS Sample: adipic acid Available SHELF LIFE: 2 Years MOQ: 20t/1FCL HS Code: 29171200 Storage: Cool Dry Place Keywords: buy 99.8% Adipic Acid factory price
Monel 400 (UNS N04400, NCu30) The structure of Monel 400 alloy is a high-strength single-phase solid solution. It is a corrosion-resistant alloy with the largest amount, the widest application and excellent comprehensive performance. This alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium, and also has excellent corrosion resistance to hot concentrated lye. At the same time, it is also resistant to corrosion by neutral solutions, water, sea water, atmosphere, organic compounds, etc. An important feature of this alloy is that it generally does not produce stress corrosion cracks and has good cutting performance. The alloy has excellent corrosion resistance in fluorine gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives. At the same time, it is more corrosion resistant than copper-based alloys in seawater. â?² Acid medium: M400 is corrosion-resistant in sulfuric acid with a concentration of less than 85%. M400 is one of the very few important materials in durable hydrofluoric acid. â?² Water corrosion: M400 alloy not only has excellent corrosion resistance under most water corrosion conditions, but also pitting corrosion and stress corrosion are rarely found, and the corrosion rate is less than 0.25mm/a. â?² High temperature corrosion: The maximum temperature of M400 continuous work in the air is generally around 600�°C, and in high temperature steam, the corrosion rate is less than 0.026mm/a. â?² Ammonia: Due to the high nickel content of Monel 400 alloy, it can resist corrosion under anhydrous ammonia and ammoniation conditions below 585�°C. American standard designation: UNS N04400, Specifications: ASTM B164, ASTM B127, ASTM B165, ASTM B725, ASTM B163, ASTM B366, ASTM B164, ASTM B564, ASTM B164, AMS 4574, AMS 4675, AMS 4730, AMS 4731, AMS 4544, AMS 4574, AMS 4675, AMS 4730, AMS 4731, AMS 4544. German standard designation: W.Nr. 2.4360, Specifications: DIN 17743, DIN 17750, DIN 17752, DIN 17753, DIN 17754. Japanese standard designation: JIS NW4400, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907. Chinese standard designation: NS111, Specifications: GB/T 2054, GB/T 2055, GB/T 2056, GB/T 2057, GB/T 2058, GB/T 2059, GB/T 2060, GB/T 2061. We can provide the following the form:Monel alloy 400 coil; Monel alloy 400 strip;Monel alloy 400 plate; Monel alloy 400 sheets; Monel alloy 400 tube; Monel alloy 400 pipe; Monel alloy 400 flat; Monel alloy 400 bar GB: NS111 ;JIS:NW4400;UNS:N04400;W.Nr:2.436 This alloy is mainly used for 1. Seamless water pipes and steam pipes in power plants 2. Sea water exchanger and evaporator 3. Sulfuric acid and hydrochloric acid environment 4. Crude oil distillation 5. The pump shaft and propeller of the equipment used in seawater 6. The nuclear industry is used to manufacture equipment for uranium refining and isotope separation 7. Manufacture of pumps and valves used in the production of hydro
Monel 400 (UNS N04400, NCu30) The structure of Monel 400 alloy is a high-strength single-phase solid solution. It is a corrosion-resistant alloy with the largest amount, the widest application and excellent comprehensive performance. This alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium, and also has excellent corrosion resistance to hot concentrated lye. At the same time, it is also resistant to corrosion by neutral solutions, water, sea water, atmosphere, organic compounds, etc. An important feature of this alloy is that it generally does not produce stress corrosion cracks and has good cutting performance. The alloy has excellent corrosion resistance in fluorine gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives. At the same time, it is more corrosion resistant than copper-based alloys in seawater. â?² Acid medium: M400 is corrosion-resistant in sulfuric acid with a concentration of less than 85%. M400 is one of the very few important materials in durable hydrofluoric acid. â?² Water corrosion: M400 alloy not only has excellent corrosion resistance under most water corrosion conditions, but also pitting corrosion and stress corrosion are rarely found, and the corrosion rate is less than 0.25mm/a. â?² High temperature corrosion: The maximum temperature of M400 continuous work in the air is generally around 600�°C, and in high temperature steam, the corrosion rate is less than 0.026mm/a. â?² Ammonia: Due to the high nickel content of Monel 400 alloy, it can resist corrosion under anhydrous ammonia and ammoniation conditions below 585�°C. American standard designation: UNS N04400, Specifications: ASTM B164, ASTM B127, ASTM B165, ASTM B725, ASTM B163, ASTM B366, ASTM B164, ASTM B564, ASTM B164, AMS 4574, AMS 4675, AMS 4730, AMS 4731, AMS 4544, AMS 4574, AMS 4675, AMS 4730, AMS 4731, AMS 4544. German standard designation: W.Nr. 2.4360, Specifications: DIN 17743, DIN 17750, DIN 17752, DIN 17753, DIN 17754. Japanese standard designation: JIS NW4400, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907. Chinese standard designation: NS111, Specifications: GB/T 2054, GB/T 2055, GB/T 2056, GB/T 2057, GB/T 2058, GB/T 2059, GB/T 2060, GB/T 2061. We can provide the following the form:Monel alloy 400 coil; Monel alloy 400 strip;Monel alloy 400 plate; Monel alloy 400 sheets; Monel alloy 400 tube; Monel alloy 400 pipe;Monel alloy 400 flat; Monel alloy 400 bar GB:NS111;JIS:NW4400;UNS:N04400;W.Nr:2.436 This alloy is mainly used for 1. Seamless water pipes and steam pipes in power plants 2. Sea water exchanger and evaporator 3. Sulfuric acid and hydrochloric acid environment 4. Crude oil distillation 5. The pump shaft and propeller of the equipment used in seawater 6. The nuclear industry is used to manufacture equipment for uranium refining and isotope separation 7. Manufacture of pumps and valves used in the production of hydrochlo
**Professional Fuel Supply Offer** **Product:** - DIESEL, GAS , OIL , EN590, JET A-1, D1 , D2 D-6 - Monthly Quantity: 50,000 MT - 10,000,000 MT **Pricing:** - Prices: Negotiable - CIF terms available - EN590 FOB - Jet A-1 Fuel FOB - D1 FOB - D2 FOB - D6 FOB **Contact Information:** WhatsApp: +17705881989 WeChat: +14043768928 Email: wpaul@pbwmanufacturing.com **Requirements for Proceeding:** - Buyer to issue Irrevocable Corporate Purchase Order (ICPO) along with company Certificate - Buyer must have TSR **Storage Information:** - Fuel is stored at Vopak and Kinder Morgan, renowned Tier 1 Tank Storage Facilities in Rotterdam, Houston, Fujairah, Duqum, and Qatar. . TTT Procedure for FOB Dip and Pay, Rotterdam Port (E-tank / Non-negotiable) 1. Initial Steps: The buyer issues an Irrevocable Corporate Purchase Order (ICPO), company registration certificate, data page of the buyer's passport and an Authorization to Verify (ATV) the Tank Storage Agreement with the E-Tank provider. (Proof of funds will be waived if the ATV is successful.) 2. TSA Verification, CI and DTA: The seller verifies the TSA and upon successful verification, issues the Commercial Invoice (C.I). The buyer signs and returns the CI to the seller within 48 hours. The seller will also issue a DTA ( Dip Test Authorization) to be endorsed by the buyer and buyer's tank farm. 3. Proof of Product and Injection Schedule a. Injection Schedule: The seller releases the injection schedule to the buyer and the buyer's tank farm company. The buyer and their tank farm must sign and return these documents to the seller within 48 hours. b. Proof of Product (POP) Documents: Concurrently, the seller issues the following documents to the buyer: (a) Fresh SGS report (b) Product Passport (c) Injection Report (d) Unconditional DTA (e) Authorization to Sell and Collect (ATSC) (f) AuthorizationtoVerify(ATV) Option A �¢?? seller injects fuel into the buyer�¢??s tank. 4. Tank Storage Receipt: The buyer�¢??s tank storage company will issue a TSR for at least 5 days. The Lessee�¢??s name will include both the Buyer and the Seller. The refinery�¢??s name will also be included. 5. Injection of product into Buyer�¢??s tanks: Upon Buyer�¢??s confirmation of the POP documents in clause 5, Seller will commence injection of product into the Buyer�¢??s tank. 6. Dip Test: The Buyer is responsible for ordering SGS to conduct a dip test of the product in the Buyer�¢??s tank at the Buyer's expense. 7. Payment and Delivery: Following a successful SGS dip test, the Buyer must make a 100% payment via MT103/TT wire transfer for the total product within forty-eight (48) hours. The Seller will pay commissions to all intermediaries involved in the transaction within forty-eight (48) banking hours after confirmation of the Buyer's payment.
Inconel 601, an alloy material. Excellent oxidation resistance at high temperature, good carbonation resistance, good oxidation resistance to sulfur-containing atmosphere, good mechanical properties at room temperature and high temperature, good resistance to stress corrosion cracking due to controlled Carbon content and grain size, 601 has higher creep rupture strength, so it is recommended to use 601 in the field above 500 �°C. Below are the international standard designations and specifications for Inconel 601: American standard designation: UNS N06601, Specifications: ASTM B166, ASTM B167, ASTM B168, ASTM B775, ASTM B829, ASTM B517, ASTM B751, ASTM B775, ASTM B829, ASTM B775, ASTM B751, ASTM B775, AMS 5715, AMS 5870, AMS 5871, AMS 5580, AMS 5715, AMS 5870, AMS 5871, AMS 5580. German standard designation: W.Nr. 2.4851, Specifications: DIN 17742, DIN 17750, DIN 17751, DIN 17752, DIN 17753, DIN 17754. Japanese standard designation: JIS NCF 601, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907. Chinese standard designation: GH236, Specifications: GB/T 5580, GB/T 14992, GB/T 14995, GB/T 14997, GB/T 15000, GB/T 15001. We can provide the following the form:Inconel601 alloy coil; Inconel601 alloy strip;Inconel601 alloy plate; Inconel601 alloy sheets; Inconel601 alloy tube; Inconel601 alloy pipe; Inconel601 alloy flat; Inconel601 alloy bar GB:1Cr23Ni60Fe13Al;JIS:NAS 601/NCF 601;UNS:N06601;W.Nr:2.4851 1. Trays, baskets and fixtures used in heat treatment factories. 2. Steel wire split annealing and radiant tubes, high-velocity gas burners, wire mesh belts in industrial furnaces. 3. Isolation tanks in ammonia reforming and catalytic support grids in nitric acid manufacturing. 4. Exhaust system components 5. Combustion chamber of solid waste incinerator 6. Pipe supports and soot handling components 7. Exhaust gas detoxification system components 8. Oxygen reheater
Chemical Name - 2-BENZOYLAMINO â?? 5-NAPTHOL 7-SULPHONIC ACID CAS No - 132-87-6
N-formyl-L-leucine(CAS:6113-61-7)
Java Peanuts Specifications: � PROPERTIES VALUES & LIMITS � Product Name: Java Peanuts / Kacang Tanah / Groundnut Kernels � Counts Per Ounce: 50/60, 60/70 & 80/90 (Counts Per Ounce) � Moisture: 7% Max � Cleaning: Sortex Cleaned � Oil Content: 48% - 52% Max � Place of Origin: India � Foreign Material: 1% Max � Aflatoxin: 10 ppb (Tlc Method) � Shape: Long/ Lengthy, Round Packaging Details: � TYPES OF BAGS QUANTITY � Jute Bag 2, 8, 10, 15, 25 & 50 KG in New Jute Bag � PP Bag 25 & 50 KG in New PP Bags � Vacuum Pack 25 Kg Vacuum Bags, Out Side PP Bag � - As Per Customer Requirement Container Capacity: � TYPE OF CONTAINER � QUANTITY � 20\' FT Container� � 19-20 Metric Tons � 40\' FT Container � 27 Metric Tons
Carbon Chain Distribution by GLC (%) C16 C18 C20 1.0 max. 99.0 min. 1.0 max. Appearance Flakes / Fused Hydrocarbons (% by wt) 0.3 max. Moisture (% by wt) 0.1 max. (Fused) 0.3 max. (Flakes/Pastilles) Acid Value 0.1 max. Saponification Value 0.2 max. Iodine Value 0.2 max. Avg. Molecular Weight 267 - 274 Hydroxyl Value 205 - 210 Solidification Range (C) 56-59 Flash Point (�°C) Ca 195 Density (gms/cc) @ 60C 0.805- 0.815 Colour (apha) 10 max. Boiling Range (C) 330 -355 Carbonyl Value (as ppm CO) 50
TJ Peanuts Specifications: PROPERTIES VALUES & LIMITS Product Name: TJ Peanuts / Kacang Tanah / Groundnut Kernels Counts Per Ounce: 50/60, 60/70 & 80/90 (Counts Per Ounce)  Moisture: 7% Max  Cleaning: Sortex Cleaned Oil Content: 48% - 52% Max  Place of Origin: India  Foreign Material: 1% Max Aflatoxin: 10 ppb (Tlc Method)  Shape: Long/ Lengthy, Round Packaging Details: � TYPES OF BAGS QUANTITY � Jute Bag 2, 8, 10, 15, 25 & 50 KG in New Jute Bag  PP Bag 25 & 50 KG in New PP Bags Vacuum Pack 25 Kg Vacuum Bags, Out Side PP Bag � - As Per Customer Requirement Container Capacity: � TYPE OF CONTAINER  QUANTITY 20' FT Container  19-20 Metric Tons  40' FT Container  27 Metric Tons
Wooden Key Holder For Home and Office | Bird Design Key holder For home and office | Unique design Key Holder for Home and office DECORATIVE KEY HOOK RACK� â?? This beautiful couple shape pine key rack features 7 individual hanging stainless steel hooks used for storing keys, headphones, or small personal items. THE SEARCH IS OVER: You can say goodbye to the torment of scrounging through your home each day to discover your keys, caps and so forth. Elegant Matt Design: The modern design will add a touch of style to your storage and complement your home decor. It is wall mounted hanging organizer for the entrance of the house or anywhere so it can save and utilize the space. Use wherever more storage is needed in hallways, entryways, mudrooms, kitchens, laundry/utility rooms, garages, offices and more. SMART HOUSEWARMING GIFT� Great for newlyweds, new couples, friends, and family, these make a wonderful unique present for anyone with large families or multiple cars
FULLY REFINED PARAFFIN WAX Test Items Standard Melting Point 50/52;52/54;54/56;56/58;58/60 60/62;62/64;64/66 Oil Content % (m/m) â?¤ Max 0.5 Color Saybolt â?¥ Min +27 Min +25 Light Stability # â?¤ Max 4 Max 5 Penetration (25â??) 1/10 mm â?¤ Max 19.0 Max 17.0 Odor, No Max â?¤ Max 1.0 Water Soluble Acid And Alkali null Impurity and Water null Viscosity(100â??)mm�²/s report SEMI REFINED PARAFFIN WAX Test Items Standard Melting Point 56-58; 58-60 70-72 Oil Content % (m/m) % â?¤ Max 2.0 Color Saybolt â?¥ Min +18 Light Stability # â?¤ Max 6 Max 7 Penetration (25â??) 1/10 mm â?¤ Max 23 Odor, No Max â?¤ Max 2.0 Water Soluble Acid And Alkali null Impurity and Water null Viscosity(100â??)mm�²/s report CRUDE WAX Test Items Standard Melting Point 52-54; 54-56; 58-60; 64-66 Oil Content % (m/m) % â?¤ Max 2.0 Light Stability # â?¤ Max -5 Odor, No Max â?¤ Max 3.0 Impurity and Water null
Essential details Place of Origin: AUSTRIA Brand Name: High quality Aluminium litho sheet Type: Aluminum Sheets Weight: 25 Al Content (%): 99.7%-99.9% Material: 99.7% Pure Aluminum Supply Ability Supply Ability 12100 Ton/Tons per Month Packaging & delivery Packaging Details pallet Lead time: Quantity(tons) 1 - 1000 >1000 Lead time (days) 20 To be negotiated Specifications 1. Alloy: 6063-T5/T6 2. Length: 3-6.5 m 3. Normal anodizing thickness: 8 to 12 micro 4. Normal powder coating thickness: 60 â?? 100 micro 5. Tensile Strength: â?¥160 MPa 6. Yield strength: â?¥110 MPa 7. Extensibility: â?¥8% 8. Hardness (HW): â?¥8
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�¯�¿�½?�?�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�¯�¿�½?�?�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�¯�¿�½?�?�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�¯�¿�½?�?�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�¯�¿�½?�?�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�¯�¿�½?�?�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller nominated bank account within 48 hours after receipt of the final assay report from buyer�¯�¿�½?�?�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading
We are a group of companies and one of the prominent traders and suppliers of varied collection of commodities. We have constantly evolved to create a richly diversified line of products from some of the most reputed fields across Africa. Our products are procured from authorized vendors and are in total compliance with set industry norms. On behalf of the Management of Alpha Metal & Chemical Solutions hereby termed as the seller and with full corporate authority and responsibility certifies, represents and warrants to inform you that we are ready, willing and able to supply under the penalty of perjury, the following commodity with its specifications mentioned below. Product Name : Rail Scrap (R50, R65 & HMS) Material : Iron Metal Scrap Application : Melting/Industrial Use Quantity : Agreed shipment/Bulky 50,000 Metric Tonnes Current location : Kenya Country of Origin: Colonial Price :$195 Per Tonne (Negotiable) Contract : CIF Loading Port : Mombasa Delivery : Immediately contract signed by both parties Port Destination : TBA Payment : By TT within 48 hours after delivery and final analysis at the final destination port CHEMICAL COMPOSITION: SCRAP/RAILROAD FERROUS SCRAP (R50/R65) R50 GOST 7173-75 : Weight 51.67 KG/Meter R65 GOST 8165-75 : Weight 64.72 KG/Meter C : 0.60 -0.82% Mn : 0.75 1.05% Si : 0.13 0.28% P : Max 0.035% S : Max 0.045% Ar : Max 0.051% PROCEDURE: 1. Seller issues the FCO 2. The buyer physically inspects the goods in Kenya 3. After client�?�¢??s satisfaction, buyer and seller enter into a contract according to their own agreement. 4. Upon signing of the contract, the buyer will cater for the goods insurance, logistics and cutting charges summing to at least 10% of the whole contract value. 5. Note that the above charges are deductible from the final invoice value and the remaining balance of 90% is to be paid in negotiations with some after documentation including Bill of Lading and some balance after the goods arrive to the buyer�?�¢??s final destination port. i.e. (Terms are Negotiable)' 6. After loading, the seller/representative will travel together with the buyer to assist and witness discharge/offloading and to control the wire transfer of the final payment to be made to seller�?�¢??s nominated bank account within 48 hours after receipt of the final assay report from buyer�?�¢??s inspection. 7. In future quantities, seller shall notify the buyer of availability and the above procedure will be repeated. DOCUMENTATION: - Commercial Invoice, - Insurance, - Certificate of Origin, - Export permit/Certificate, - Ownership certificate, - Customs Clearance Certificate (Taxes) - Packing list - Bill of Lading