Internal Combustion Rail Drilling Machine Suppliers and Manufacturers

The internal combustion rail drilling machine is suitable for high-power track maintenance machinery working between areas without power supply. The machine uses Japanese internal combustion engine as power Source, small size, simple operation, easy maintenance, it is the ideal machine for drilling 75kg, 60kg, 50kg, 43kg rail. Local borehole The machine is suitable for the public works and engineering department to drill the joint hole of the rail and the basic rail of the switch, and is also suitable for the electrical and engineering department to guide the rail The cable plug hole is drilled. The public works department uses �?31 hollow drill bit, and the electric department uses special twist drill bit. The drilling machine has safe and reliable, Fast card loading, high drilling accuracy, short time, fast efficiency, light weight, simple operation, flexible and convenient features. The drilling machine is composed of clamp, shaft sleeve feeding device, working device, reducer, gasoline engine, scale and other parts. Gasoline engine power through Clutch, reducer, working device, transfer spindle to drive drill bit rotation.

This machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, fast clamping, accurate positioning, fast drilling, simple operation and safety use.The rail clamping device has self-locking function, and high drilling precision. The hollow drill bit is used, and special twist drills below 13.5 can also be clamped according to needs. It has automatic water supply function when drilling, and is suitable for maintenance, emergency repair and overhaul operations in public works departments. Item Petrol Engine Rail Drilling Machine Dimensions (L x W x H) (mm) 650*230*250mm Place of Origin China Model NZG-31Internal Combustion Steel Rail Drilling Machine Internal Combustion Engine Honda Gasoline Engine GX35 Rotate Speed without load 270r/min Rate of Power 1.2KW Driling Diameter 31, 13.5, 9.8 Drilling Time 25s Weight 17KG

The internal combustion rail drilling machine is an essential tool for line maintenance, construction and emergency repair operations in railway works and engineering departments. It adopts a hollow drill bit and a screw nut tightening mechanism with a quick-opening function. Easy to operate and safe to use. The machine is also equipped with an automatic water supply and cooling device for the drill bit. When the drilling starts, the cooling water is automatically supplied, and after the drilling is completed, it stops automatically. Gasoline engine power 1.47kW (Mitsubishi) or 1.2kW (Thailand Honda) Maximum hole diameter 31mm Spindle revolutions 250~ 285r/min Drilling time 40S Dimensions 800 X 340 X 400mm Net weight of the whole machine 23kg

The internal combustion rail drilling machine is an essential tool for line maintenance, construction and emergency repair operations in railway works and engineering departments. It adopts a hollow drill bit and a screw nut tightening mechanism with a quick-opening function. Easy to operate and safe to use. The machine is also equipped with an automatic water supply and cooling device for the drill bit. When the drilling starts, the cooling water is automatically supplied, and after the drilling is completed, it stops automatically. Gasoline engine power 1.47kW (Mitsubishi) or 1.2kW (Thailand Honda) Maximum hole diameter 31mm Spindle revolutions 250~ 285r/min Drilling time 40S Dimensions 800 X 340 X 400mm Net weight of the whole machine 23kg

This Internal Combustion Rail Drilling Machine is an indispensable tool for railway maintenance, construction and emergency repair operations. It uses a hollow drill bit, fast clamping, accurate positioning, fast drilling, simple operation and safety use.The rail clamping device has self-locking function, and high drilling precision. The hollow drill bit is used, and special twist drills below �?13.5 can also be clamped according to needs. It has automatic water supply function when drilling, and is suitable for maintenance, emergency repair and overhaul operations in public works departments. Weight 23kg Dimensions (L x W x H) (mm) 668�?340�?425ï¼?mmï¼? Place of Origin China Engine Petrol engine :Honda GX50 1.47kW single cylinder,4stroke, forced air colling Displacement 47.9ml Speed 7000rmp Fuel tank capacity 0.63L Max drilling diameter 36mm Drill time â?¤30s Spindle speed at full load 292r/min Drill rod size weldon 19

The internal combustion rock drill is a combination of small gasoline engine, compressor, rock drill from the jackhammer tool.It is suitable for mountains, no power, no wind pressure equipment areas and greater mobility of temporary works. During operation, compressed air from the purge itself of the eyes of rock powder guns. Main applications Turning the swing arm to running-or-stop rotation, the machine can be converted into a breaker or a hammer, for breaking, digging, splitting or ramming. The machine is suited to build of bridge, road, power station, geological exploration etc. Features of rock drill 1.Easy to operate , just turn the handle to make it work. 2. Time and labor saving, Drilling fast and high efficiency. 3.Light Drilling Tools, only 27kgs, easy to carry. 4.Used to drill vertical downward hole(max depth 6m) and and

Summary Advantages: Needless to replace the internals of the engine head, just handle the handle to operate it. Easy to operate. More time-saving and effortless. Drilling faster and more efficient. Have reached the tip-top level of the same field now, and allow to be replaced with the same kind of the domestic products. Applications: Available for drilling, splitting breaking, ramming, shoveling. And widely used in mining, road contruction, quarrying and national defense construction, etc. Wooden crate

1. Introduction of YN27A internal combustion rock drill The YN27A internal combustion rock drill is widely used in an internal combustion type rock drill for mining, road construction, quarrying, national defense engineering, etc. The rock drill is easy to operate. The rock drill is suitable for areas with no power supply and no wind pressure equipment and temporary engineering with large fluidity. Especially suitable 2.Features of YN27A internal combustion rock drill ·It is not necessary to replace the internal parts of the machine head, just move the handle as required to operate. ·The machine is easy to operate, saves time and labor, and has the characteristics of fast cutting speed and high efficiency. ·The machine has reached the first-class level of similar products and can be completely interchanged with international similar products. ·Drill holes in the rock, which can be vertically downwards, horizontally upwards less than 45°, and vertically drilled up to six meters. ·The weight of the main unit is only 27 kg, which is convenient to carry. It is suitable for areas with high mountains, no power supply, no wind pressure equipment and temporary projects with large fluidity. ·This machine has wide adaptability in both high mountains and flat land, regardless of the extreme heat of 40° or the cold region of minus 40°. 3.Parameters of YN27A internal combustion rock drill ·Host weight: 27kg ·Engine type: Single cylinder air-cooled two-stroke gasoline engine ·Carburetor type: No float ·Ignition method: Thyristor contactless system ·Engine capacity:185 cm³ ·Engine load speed:(Determined when chiseling five holesï¼?ï¼?â?¥2450 r/min ·Drill rod idle speedï¼?â?¥200r/min ·Shank size tailï¼?Hexagon 22|*108 mm ·Deepest hole penetration depthï¼?â?¥6 m ·Fuel tank capacityï¼?â?¥1.14 L ·Punching speedï¼?â?¥250mm/min ·Gasoline and lubricating oil mixing ratio:(By volumeï¼?ï¼?9:1 ·Spark plug electrode gap:0.5-0.7 mm ·Fuel consumption rate:(Determined when chiseling five holes):â?¤0.12L/M ·Impact energy:â?¥20J Shandong Master Machinery Group specializes in supplying internal combustion rock drill. The main models are YN27A, YN27P, YN27C.

1.Introduction of YN27C internal combustion rock drill The YN27C internal combustion rock drill has various functions such as mining, drilling, building construction, geological exploration, cement pavement, asphalt pavement and other functions such as splitting, crushing, compacting and shovel. It is widely used in mining, road construction, quarrying, construction, railway tamping, geological survey, national defense engineering, etc. 2.Features of YN27C internal combustion rock drill You only need to move the handle as required to complete the drilling or crushing operation. The machine is easy to operate, saves time and labor, and has the characteristics of fast cutting speed and high efficiency. The machine has reached the first-class level of similar products and can be completely interchanged with international similar products. The drilling can be vertically downwards, horizontally upwards less than 45°, and vertically drilled up to six meters. The weight of the main machine is only 27 kg. Only one person can operate it. It is easy to carry. It is suitable for areas with high mountains, no power supply, no wind pressure equipment and temporary projects with large mobility. This machine has wide adaptability in both high mountains and flat land, regardless of the extreme heat of 40° or the cold region of minus 40°. This machine adopts export packaging, and all the indicators meet the export standards. This product is exempt from inspection and does not require commodity inspection for export. Since only gasoline needs to be added to work, no other auxiliary equipment is needed. This machine is suitable for mining of various mines such as iron ore, copper mine, nickel mine, lead-zinc mine, gold mine, gemstone mine, granite, bluestone and jade. 3.Parameters of YN27C internal combustion rock drill Host weight: 27kg Engine type: single cylinder air-cooled two-stroke gasoline engine Carburetor type: no float Ignition method: thermistor contactless system Engine displacement: 185 cm³ Engine load speed (measured when chiseling five holes): â?¥2450r/min Drill rod idle speed: â?¥200r/min Shank size drill rod tail: hexagon 22*108mm Deepest hole drilling depth: â?¥6m Fuel tank volume: â?¥1.14L Punching speed: â?¥250mm/min Gasoline and lubricating oil mixing ratio (by volume): 12:1 Spark plug electrode gap: 0.5-0.7mm Fuel consumption rate (measured when chiseling five holes: â?¤0.12L/M Impact energy: â?¥25J Shandong Master Machinery Group specializes in supplying internal combustion rock drills. The main models are YN27A, YN27P and YN27C.

We supply Anti Vibration Machine Pads, Round Levelling Mounts, Precision Wedge Mounts, Base Mounts and special tailor made mounts for special applications as per sample or drawings Our Products are manufactured using materials such as Nitrile Rubber, Cork articles, Chemicals, and High Grade Castings & Fasteners. Our product range covers a wide range of applications from Forging Hammer to Air Compressor.

Hss twist drill bits, sds plus hammer drill bit, hss machine taps, hss step drill bits, hss center drill bits, wood working drill bits, masonry drill bits, end mills, diamond cutting disc, tct saw blade.

Specifications: Sheet Size:210mm x 297mm, International Size A4 Quality: Imported 100% Virgin Wood Pulp Whiteness = 102-104%, Natural White Capability: High Speed Copying100ppm, Laser Capable,Inkjet Capable, Fax Capable. Thickness: 103-110 um Surface roughness TS ml/min: 75-175 Surface roughness BS ml/min: 100-200 Bending stiffness MD: >110 Mn Bending stiffness CD: >50 Mn CIE whiteness: 148-152 Cobb Test: 27-33 g/m2 27-33 multi-function A4 copy paper Basic weight - 70gsm, 75gsm, 80gsm Size - A4, A3, 8.5*11",8.5*13",11*17" Moisture - 3.5%-4.5% capapacity - >94% Brightness - 101-104% Place of Origin - Thailand Key Performance - No jam in photocopy machine Leave no dust in the copy machine Nice appearance-white and clean Nice touch-smooth and bulky No see through-print both sides Been developed for Photocopy Machines,Laser Printers,Inkjet Printers,Fax Machines Packing - 500sheets/ream,5,8 or 10reams/carton PACKING DETAILS - 500 Sheets per Ream 5 Reams per Box 1560 Boxes per 20ft container( With Pallet) 1600 Boxes Per 20ft container( Without Pallet) 7800 Reams Total in one 20FCL( With Pallet) 8000 Reams Total in one 20FCL( Without Pallet)