Solar Cells Solar Panel Solar Module Ultra-high Efficiency TOPCon Module Much higher module conversion efficiency of 23%, resulting in significantly lower LCOE and greater BoS savings Low attenuation, long warranty (30-year power warranty with less than 0.4% annual linear power decay) Significantly improved temperature coefficient of -0.29% Higher bifacially of 85% leads to more power generation
250W Solar Panel 2018 high efficiency New-Tech Poly Solar Panel with TUV IP67 25 Years Warranty1. Product Introduction of the 250W Poly Solar PanelWe supply 250W Poly solar Solar Panel 2018 high quality with TUV ISO IP67 25 Years Warranty. We devoted ourselves to Solar many years, covering most of Europe and Americas and most of Asia market. Limited power degradation of panels caused by PID effect is guaranteed under strict testing condition (85/85%RH,96hours) for mass production. Polycrystalline 72-cell module achieves a power output up to 330Wp. Entire module certified to withstand high wind loads (2400 Pascal) and snow loads (5400 Pascal). Advanced glass and surface texturing allow for excellent performance in low-light environments. We are expecting become your long-term partner in China. 2. Product Parameter (Specification) of the250W Poly Solar PanelProduction line3. Product Feature And Application of the 300W Poly Solar PanelWe supply 300W Poly solar Solar Panel has 5 Key Features:(1) PID Resistant: Limited power degradation of panel caused by PID effect is guaranteed under strict testing condition (85/85%RH,96hours)for mass production.(2) High power output: With up to 300 Wp and 17.26 % efficiency, highest performing module of its kind on the market.(3) Low-light-performance: Excellent performance in low-light environments.(4) Severe Weather Resilience: Extremely weather resistant due to approval for increased snow and wind loads: 5400 Pa snow load, 2400 Pa wind load.(5) 5 Busbar Solar Cell: No power loss thanks to improved temperature co-efficient caused by 5 busbar solar cell. We supply 300W Poly solar Solar Panel has 5 application used.1. On-gaid/ Off-gaid roof solar system2. Agriculture/Fishery industry3. Street light/ Traffic light4. Others265/270W Polycrystalline 60cells (156mmx156mm)ELECTRICAL SPECIFICATIONS (STC)TypePmaxToleranceVmpImpVocIscSYP265S265W+-3%31.548.4138.708.91SYP270S270W+-3%31.998.4539.348.92SYP275S275W+-3%32.998.4939.948.95STC Irradiance 1000 W/ m2, Temperature 25+/-2, AM1.5PRODUCTION SPECIFICATIONS -Cell Size60pcs (156mmX156mm)-Dimensions1640 x 992 x 35mm -Weight18.5kg -Temperature Coefficient (Voc)-0.39%/-Temperature Coefficient (Isc)+0.033%/-Temperature Coefficient (Pmax)-0.44%/- Junction BoxIP65- Power Tolerance±3%
200W Solar Panel 2018 high efficiency New-Tech Poly Solar Panel with TUV IP67 25 Years Warranty 1. Product Introduction of the 200W Poly Solar PanelWe supply 200W Poly solar Solar Panel 2018 high quality with TUV ISO IP67 25 Years Warranty. We devoted ourselves to Solar many years, covering most of Europe and Americas and most of Asia market. Limited power degradation of panels caused by PID effect is guaranteed under strict testing condition (85/85%RH,96hours) for mass production. Polycrystalline 72-cell module achieves a power output up to 330Wp. Entire module certified to withstand high wind loads (2400 Pascal) and snow loads (5400 Pascal). Advanced glass and surface texturing allow for excellent performance in low-light environments. We are expecting become your long-term partner in China.2. Product Parameter (Specification) of the250W Poly Solar PanelProduction line3. Product Feature And Application of the 300W Poly Solar PanelWe supply 300W Poly solar Solar Panel has 5 Key Features:(1) PID Resistant: Limited power degradation of panel caused by PID effect is guaranteed under strict testing condition (85/85%RH,96hours)for mass production.(2) High power output: With up to 300 Wp and 17.26 % efficiency, highest performing module of its kind on the market.(3) Low-light-performance: Excellent performance in low-light environments.(4) Severe Weather Resilience: Extremely weather resistant due to approval for increased snow and wind loads: 5400 Pa snow load, 2400 Pa wind load.(5) 5 Busbar Solar Cell: No power loss thanks to improved temperature co-efficient caused by 5 busbar solar cell. We supply 300W Poly solar Solar Panel has 5 application used.1. On-gaid/ Off-gaid roof solar system 2. Agriculture/Fishery industry3. Street light/ Traffic light4. Others230W Polycrystalline72cells (156mmx117mm)ELECTRICAL SPECIFICATIONS (STC)TypePmaxToleranceVmpImpVocIscSYP230S230W+-3%36.26.3645.27.07STCï¼? Irradiance 1000 W/ m2, Temperature 25+/-2, AM1.5PRODUCTION SPECIFICATIONSï¼?-Cell Size72pcs (156mmX117mm)-Dimensions990 x 1490 x 35mm -Weight 16.5kg -Temperature Coefficient (Voc)-0.39%/-Temperature Coefficient (Isc)+0.033%/-Temperature Coefficient (Pmax)-0.44%/- Junction BoxIP65- Power Tolerance±3%
250W Solar Panel 2018 high efficiency New-Tech Poly Solar Panel with TUV IP67 25 Years Warranty1. Product Introduction of the 250W Poly Solar PanelWe supply 250W Poly solar Solar Panel 2018 high quality with TUV ISO IP67 25 Years Warranty. We devoted ourselves to Solar many years, covering most of Europe and Americas and most of Asia market. Limited power degradation of panels caused by PID effect is guaranteed under strict testing condition (85/85%RH,96hours) for mass production. Polycrystalline 72-cell module achieves a power output up to 330Wp. Entire module certified to withstand high wind loads (2400 Pascal) and snow loads (5400 Pascal). Advanced glass and surface texturing allow for excellent performance in low-light environments. We are expecting become your long-term partner in China. 2. Product Parameter (Specification) of the250W Poly Solar PanelProduction line3. Product Feature And Application of the 300W Poly Solar PanelWe supply 300W Poly solar Solar Panel has 5 Key Features:(1) PID Resistant: Limited power degradation of panel caused by PID effect is guaranteed under strict testing condition (85/85%RH,96hours)for mass production.(2) High power output: With up to 300 Wp and 17.26 % efficiency, highest performing module of its kind on the market.(3) Low-light-performance: Excellent performance in low-light environments.(4) Severe Weather Resilience: Extremely weather resistant due to approval for increased snow and wind loads: 5400 Pa snow load, 2400 Pa wind load.(5) 5 Busbar Solar Cell: No power loss thanks to improved temperature co-efficient caused by 5 busbar solar cell. We supply 300W Poly solar Solar Panel has 5 application used.1. On-gaid/ Off-gaid roof solar system 2. Agriculture/Fishery industry3. Street light/ Traffic light4. Others250/260W Polycrystalline 72cells (156mmx130mm)ELECTRICAL SPECIFICATIONS (STC)TypePmaxToleranceVmpImpVocIscSYP240S240W+-3% 35.4 6.78 44.27.54 SYP245S245W+-3%35.76.8744.67.64SYP250S250W+-3% 36.06.9545.0 7.73 SYP255S255W+-3%36.27.0545.27.84SYP260S260W+-3%36.47.1545.47.95STCï¼? Irradiance 1000 W/ m2, Temperature 25+/-2, AM1.5PRODUCTION SPECIFICATIONSï¼?-Cell Size72pcs (156mmX130mm)-Dimensions 1640 x 992 x 35mm -Weight 18.5kg -Temperature Coefficient (Voc) -0.39%/-Temperature Coefficient (Isc)+0.033%/-Temperature Coefficient (Pmax) -0.44%/- Junction Box IP65- Power Tolerance ±3%
Name: High efficiency polysilicon wafer Technology : Diamond wire cutting Type : P type Resistance:1~3μs minority carrier:>2 μs Hem width:157.00~157.25mm Thickness:200±20μm Transfer efficiency:>18.8% Advantage of High efficiency polysilicon wafer for solar cell The production process is simple, cost-effective, and reduces silicon waste High conversion efficiency, low fragmentation rate and low optical attenuation Manufacturing Specialization, Intelligence and Greening Customized products to meet customer needs Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsale@hxkjgf.com
Advantage of high quality rHigh efficiency polysilicon wafer for solar cell The production process is simple, cost-effective, and reduces silicon waste High conversion efficiency, low fragmentation rate and low optical attenuation Manufacturing Specialization, Intelligence and Greening Customized products to meet customer needs Equipment situation Seiko JJL800F Type, 36 polycrystalline ingot foundry furnaces, the annual output is 2000 tons of semi-fused high efficiency polycrystalline silicon blocks and the demand of native polycrystalline ingots is 1700tons. There are 12 sets of WuXi ShangJi brand diamond wire slicing machines, 8 sets reforming machines, the single blade capacity is 20,000 pieces per day, and the annual production capacity is over 10 million pieces. Name: High efficiency polycrystalline silicon block Technology :Semi-melting Type: P Type Resistance:1~3Ωcm minority carrier :>6μs Hem width:157.00~157.25mm Angle of Chamfer:1~2m Technology : Diamond wire cutting Type : P type Resistance:1~3μs minority carrier:>2 μs Hem width:157.00~157.25mm Thickness:200±20μm Transfer efficiency:>18.8% Hengxing company website: https://hengxingsteelwire.com/ Email contact US:wmsale@hxkjgf.com
Our factory in China and product more than 100 kinds of solar products, we has professional quality solar panels manufacturing experience for 17 years.We complete capacity of 2GW in 2022 year. As a solar energy products manufacturers, we have formed the sales territory from domestic to overseas at present. Adhering to the leading technology, the new intelligent production line is a strong guarantee for us to serve customers.Please contact us if you are interested in our product.
Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services
CPV Solar Power Prisms is used to collect the sunlight, for solar condenser, solar energy concentrating photovoltaic (CPV) system, solar power generation, etc., which is the main optical component when solar power transform to electric energy. Solar Engery Prism Specifications Material BK7, UV Fused Silica, or customer request. Size 0.5mm-300mm Size tolerance +/-0.1mm or customer request Clear Aperture 90% S/D 60-40 40-20 20/10 10/5 Flatness 1/10lambda at 632.80nm Chamfer 0.25mmx45 Angle tolerance
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, TV, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, itâ??s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter's usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] RS485 communication; AC bypass complementary function; Built-in charger
Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 12, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 13, Solar controller adopt IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 14, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 15, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 16, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 17, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. 18, The controller also has temperature compensation function and RTC real time clock function,
ESS lithium battery system is composed of lithium battery modules, BMS system, PV charge controller, AC/DC Charger, central control unit CCU, temperature detector, integrated structure and other parts; the solar panels in the system are battery storage and power for output; BMS module completes the detection and control of voltage, current, temperature, SOC, SOH and charging and discharging related parameters of power battery pack; PV controller and inverter realize bidirectional AC/DC function to meet the charging and discharging conversion demand of power battery pack; each detector is used to monitor the ambient temperature in real time to ensure the safety of the system. Product Features: 1. Standardized components, modular architecture, easy for expansion. 2. High energy density, small footprint, short construction period, strong environmental adaptability 3. Battery module within the layered stack design, with more than 10 years of long design life 4. Long Cycle Life LiFePO4 Lithium ion Battery system from 20KWH--500KWH optional 5. BMS battery management system with SOC automatic calibration and high current passive balancing function, combined with the perfect operation control and management strategies to achieve accurate and efficient management 6. The combination of software and hardware protection, with alarm protection and automatic diagnostic functions, improve the protection strategy to ensure safe and efficient operation of the system. 7. Our BMS system adopts American NXP automotive grade chips with high performance. 8. Product communicates with the monitoring platform in real time through RS232, CAN communication interface, and reports various records in time to ensure real-time monitoring of the battery pack of the monitoring platform. 9. Colorful LCD display all module working information and status.
1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Wide input voltage can be set according to customer requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 13, European CE (EMC, LVD, UL1741) and ISO9001 certificates. [Optional] A, RS485 communication; B, AC bypass complementary function; C, Built-in charger
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stationsâ?? need, there are 48Vã??96Vã??120Vã??192Vã??220Vã??240Vã?? 360Vã??384Vã??480Vã??492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stations need, there are 48V 96V 120V 192V 220V 240V 360V 384V 480V 492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)