Turnkey Projects Suppliers and Manufacturers

Frozen and unfrozen storage of foods Postharvest Pre-cooling applications of fresh fruits and vegetables Rapid Cooling applications for production process requirements Freezing of foods by Air Blast Freezing at -35/-40 °C Drying applications with cooling technology Monoblock water chillers with ice accumulation for dairy industry

The introduction of cassava starch machine 1.It is a physical separation process which makes the starch separated from the cellulose, protein, inorganic salt and other material in fresh cassava tubers. 2.After crushing fresh cassava into mash materials, we add water in the mash and use a filter to remove the residue, and then we get starch milk with protein, a little tiny cellulose, and other impurities in it. 3.Because of starch is not soluble in cold water and has different specific gravity with water, specially designed machinery equipments can be used for separating starch from starch milk, and finally achieving the purpose of collecting starch. The capacity of cassava starch machine for the whole standard production line, the hot sales capacity include: 1.Output: 5 tons per hour tapioca starch machine 2.Output: 10 tons per hour tapioca starch machine 3. Output: 20 tons per hour tapioca starch machine 4.Output: 30 tons per hour tapioca starch machine 5.Output: 50 tons per hour tapioca starch machine 6.Output: 100 tons per hour tapioca starch machine note: 1.The capacity refers to ourput tapioca starch capacity 2.The machine will work continute for 24hours per day 3.We will also design the production line according to the customer's requirement.

We specialize in special purpose machinery & turnkey project. Tech specs & costings vary based on the customer requirements. Variable

.Interior turnkey projects

.Construction services (full turnkey projects)

Textile spinning, open end, weaving, processing, non woven, geo textiles, machines and spare parts .Export with installation, training, turnkey projects

Ethanol /alcohol process line/machine,ethanol/alcohol turnkey project , industry fruit process machine/production line ,industry vegetable process machine/production line, industry noodle machine/production line , industry bread/cake machine/process line and so on . industry waste water treatment system process line .packing machine.Our company's products, technical support, training, installation and commissioning

.dredging and shipbuilding

Electronic control panel, machinery, turnkey projects, automation projects.

Fruit processing We a turnkey plant consultant & executors fr mineral water projects & fruit processing plants . Executed more than 14+6 plants in african countries. Our company is a dealer of a wide variety of food processing equipments in east african countries uganda , ethiopian , rwandi , congo etc.. Presently we are executing 3 in 1 fruit processing unit at uganda, masaka.Hv fruit processing plant with 5t/ h fruits intake with fruit juice 250ml/ 1 lit spout /pack filling line machinery with associate equipments . Fruits : pineapple , passion fruit & citrus . We are still looking forward to expanding our representative package to better meet our clients needs, therefore we would like to offer you an opportunity to have our representation african countries. We strongly believe that our food processing/production lines and packaging machines could benefit your presentation package . We a associated with mfg of food processing machinary .

Introduction Our production complete line adapts to palm fruit , palm kernel, rapeseed , coconut, corn germ and many other oil seeds. We can provide all the plants include oil pretraetment , refining and packing line. Technology process Raw material degermingcscreening¨cmagnetic separation-softening¨crolling embryos¨cfrying¨cpressing¨cfiltering¨crefining¨cedible oil Characteristic (1).Clearing equipment . Magnetic selection machine is to rid off the iron. (2). Flake equipment To make the sunflower seed into pieces between the thickness 0.3 ¨c 0.35 mm , so its well-proportioned by heating, also for the soaking process . (3).Steaming and drying process. The process is to add the hot water into the seeds crushed/flaked to moist , to add steams for steaming the seeds, to dry the seeds for ridding off more water content . In the process, with the water and temperature to make the protein of seeds change the character , make the oil moleculeo loose for easily Pressing to get crude oil, also get the better cake and oil . Moisture content :5¨c 10 %; temperature : 105 ¨c 110 degrees ; requiring time : 40mins . (4). Pre-pressing process The process is to press the seeds and get the crude oil . Requiring water content : 3.5- 4.2 % ; Temperature 105 ¨c 110 degrees ; Residue oil of cake :6% orso . (5).Filtering oil Firstly to fit the rude oil with oil-dreg sieves, then use oil filter for clear the small dregs . The oil cleared is pumped into oil tank or oil refining. Depends on capacity

1.Working process: Firstly , put the raw material into furnace, then seal the feed inlet system. Secondly, burned the fuel material(coal, or wood, or natural gas , oil ) in the combustion system, the reactor will slowly heat , when the temperature reaches around 250 degree celsius, it will produce oil gas, oil gas will be processed by our technology , then go to cooling system to cold liquid oil. The gas which can not be liquid under normal pressure , which will be designed to back to combustion system to instead the fuel material to burn the reactor, which can save energy very much . After finishing oil produce , the temperature of reactor will be down, At the same time , carbon black will be discharged automatically. Lastly, when the temperature falls to 100 degree celsius, worker could open the door of reactor to discharge of steel wire . Then can start another batch working. 2.The usage of final production-----fuel oil Fuel oil from waste tyre are used in below industries A.Power plant factory B.Glass factory C.Cement factory D.Ceramic factory E.Aluminum factory F.Boiler factory G.Central heating factory H.Painting factory The usage of final production-----carbon black Carbon black from waste tyre are used in below industries A.Electric cable jacketing B.Conveyor ban C.Hose and doormat D.Black nylon bag E.Rubber additive F.Automatic spare parts G.Heat isolation H.Black colorant in rubber materials I.Plastic pipes J.Industries rubber products K.Fire fighting The usage of final production----- steel wire Steel wire from waste tyre can be re-sale to steel factory. It varies according to diffrent capacity.

Waste tire pyrolysis plant 1) overview of pyrolysis plant The whole pyrolysis system is composed by 13 parts, which are reactor , transmission device, catalytic chamber, cooling tube, heavy tank , oil-water separator, condenser, light oil tank, safety device, vacuum system, dedusting system, draft fan, chimmey. Cooling systems decides oil output. There are two steps for cooling. Cooling pipe is the first step. The second is condenser. We have three condensers. And there are 57 pipes in one condenser. Diameter is 48mm for one small pipe. The heat exchanging area is about 13square meters for one condenser. So the total cooling area is about 40 square meters, which will guarantee you a high oil yield. 2) main features: Safety: 1. Professional sealing technology for cover, oil outlet. 2. Heavy oil is separated which can avoid the problems of jam in later condensing. 3. Vacuum system will prevent exhaust gas from going back to reactor and causing accident. 4. Alarm, safety valves, thermometer, pressure gauge and safety valve. 5. It is dangerous to burning exhaust gas (c1 to c4). In our process, it is transferred first through the safety device and a safety burning air muzzle. Before burning, we should ensure the safety of production. Environment friendly: 1. Well water dedusting system with high pressure nozzle and environmental damper inside can avoid black smoke. 2. The exhaust gas will be directly recycled for heating reactor, no gas pollution 3. Every junction of the reactor is in good sealing situation with professional sealing material. Long service life: 1. Material: q245r special steel plate, thickness 14mm. 2. The service life of the reactor will be 8 years Energy saving: 1. Well sealing for heating system, no gas leak and saving fuel. 2. The exhaust gas will be recycled for reactor heating.

With 4 salves inside and 20 22 gauge nett ms Crca steel sheet used . Minimum 100 pcs.

Irrigation sprinklers.

Pure LEad ingot is being produced from raw lead bullion / remelted and secondary lead ingots / lead scraps though pyrometallurgical process. Our refining process, producing pure lead ingots with a minimum purity level of 99.97% by weight but achieves purity level of 99.985% in most of cases. We dispatch after staking of 42 ingots in one bundle dully striped.

This is commercially called as 'Raw Lead or Lead Bullion', which is further processed to Pure Lead (99.97 purity) and / or Specific Lead Alloys. We dispatch after staking of 42 ingots in one bundle dully striped