Water processor Carton
1. Trichloro isocyanuric acid, tcca water treatment Chemicals 2.Type: powder, granular, tablet 3.Packaging: 25kg/50kg per fiber drum 25kg/50kg per fiber drum; 25kg/50kg per plastic drum;
7. Payment terms :, tt and l/c at sight , 8. Usage, :widely applied for treating the domestic drinking water , domestic sewage and industrial waste water . , 9. Package: pp woven bag with pe lined bag (25kgs/bag) or pe bag (20 kgs/bag) , 10. Storage: the products shall be sealed and stored in the dry and ventilated place to prevent from rain , high temperature and strong sunlight . , 11.Application method: 1)the liquid product can be, used, directly or, used after dilution. , , , dilution is necessary before, used for the solid product. The normal dilution ratio for the solid product is 5%-15%. , 2)the specific dosage is based on the flocculation tests and trials by the users. The usual dosage of the liquid product is 3-40 g/ton, and of the solid product, 1-15 g/ton. Plastic woven bag with pe lined bag (25kgs/bag)
Higher molecular wt. Chemical for flocculation process in effluent treatment plant 30/50/200 kgs packaging
Technical specifications and features: Commodity name: calcium hypochlorite Un: 1780 Imd: 5.1 Available chlorine: 65%, ¡ý60% Calcium chloride: 9%, 10% Yearly loss of chlorine: 8% Moisture: 3% Packing: plastic or steel drums lined with inner pe bag of 45-50kg net, or can be adaptable in terms of various requirements. Application: 1. For bleaching purpose of cotton, hemp, fiber, pulp and starch. 2. Disinfection and water-treatment. 3. Disinfectant for chemical poisonous and radioactive substance. Cautions: It shall be stored in a cool, ventilated place. Avoid heat, moisture and direct sunlight. Incompatibilities include oil, acid and organic substances. First aid information: wash with dilute ammonia solution in case of skin contact. Fire information: fire extinguishing media: sand, carbon dioxide and foam. Plastic or steel drums lined with inner pe bag of 45-50kg net, or can be adaptable in terms of various requirements.
Product introduction 1.Become flocculant in high speed , big block ,high activity and rapid sedimentation analysis. 2.It doesn't need other accessory ingredients and use less dosage than other unorganic coagulating agents and has lower cost for treatment water. 3.It has wide range PH value and strong adaptability and good effect for high turbid and high temperature organic contaminated water and lowly turbid low--temperature or ganic continue-aminated water. Product Details: AL2O3 content/% : 30 Basicity% : 40-90 Density(20¡ãC)/(g/cm3) : 1.12 Water insoluble content /% : 1.0 PH(1% aqueous solution) : 3.5-5.0 arsenic(As) content% : 0.0002 Ammoniacal nitrogen(N)content % : 0.01 lead(Pb)content% : 0.001 cadmium(Cd)content% : 0.0002 mercury(Hg)content % : 0.00001 hexavalent chrome(Cr6+)% : 0.0005 Application 1.Tap water,life sewage 2.Various industrial waste water. 3.Tannage and cloth cockling-prevent 4.Cement Solidifying, and moulding 5.Refining of pharmaceuticals, glycerine and sugar 6. Catalyzer carrier 7. Paper-making glue. Packaging and storage : 1, Lined with plastic bags, with outer surface of plastic film woven bag, each bag weighs about 25kg. 2, Stored in a cool and dry place to prevent the sun and rain. Cautions: 1.This product mustn't be stored together with other chemical reagents. 2.Solid products should be stored in a ventiated and dry place with the storage period of two years,and the availability won't be changed after the product is affected by damp. 25kg/bag.
Items index Appearance Colorless or light yellow transparent liquid White crystal powder Active content (HEDP)% 58.0-62.0 89.0 min Phosphorous acid (as PO33-)% 2.0 max 0.5 max Phosphoric acid (asPO43- )% 0.8 max 0.5 max Chloride (as Cl-)% 1.0 max 0. 1 max pH (1£¥ solution) 2 max 2 max Density (20¡æ)g/cm3 1.430 - 1.460 - Fe ion ppm 10 max 20 max. HEDP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required HEDP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients. Storage for ten months in room shady and dry place.
Item Standard AL2O3 (m/m):% 28-30 27~29 Water- insoluble(m/m):% 1.0 1.5 Ammonium Nitrogen:% 0.09 0.15 Density(20oC)/(g/cm3) 1.12 1.12 Ph Value(1% aqueous solution) 3.5~5.0 3.5~5.0 Basicity % 40~90 40~90 As(m/m):% 0.005 0.005 Pb(m/m):% 0.001 0.003 Cd(m/m):% 0.002 0.002 Hg(m/m):% 0.00001 0.0001 Cr6+ (m/m):% 0.0015 0.005. In two-layer bag with the interior in plastic and the exterior in woven. The weight of each bag is 25kg.
D201 is a high capacity, shock resistant, macroporous,Type I ,strongly basic anion exchange resin supplied in the chloride or hydroxide form as moist, tough, uniform, spherical beads. D201 has a high operating capacity, especially on high-FMA feedwaters, as well as a high reversible sorptive capacity for complex organic materials, such as the fulvic and humic acids which occur in many surface water supplies. It is recommended for use in waters with low silica loads. For high silica waters, a type 1 anion resin such as Pure D201 is recommended. Typical physical & Chemical characteristics: Polymer Matrix Structure: Styrene Crosslinked with DVB Physical Form and Appearance: Opaque beads Whole Bead Count: 95% min. Functional Groups: R-N(CH3)2(C2H4OH)+ Ionic Form ,as shipped: CL Total Exchange Capacity, CL- form, wet, volumetric 1.2 eq/l min. Moisture Retention, CL- form: 47-57% Particle Size Range: +1.2 mm
MB101 is a high quality resin mixture for direct purification of water. It is suitable for use in regenerable or non-regenerable cartridges and in large ion exchange units. Passage of water at recommended flow rates through the resin as supplied can achieve almost complete reduction of total dissolved solids. The residuals produce average conductivity values of about 0.1 µs cm-1 for a major portion of the service run which may be extended depending upon the final water quality acceptable. Equivalent volumes of ultra pure water may be obtained after regeneration but only if sufficient regenerant quantities are employed to achieve the percentage conversion levels equivalent to those of the "as supplied" resin. Generally acceptable capacity and quality is obtained economically at lower regeneration Typical physical & Chemical characteristics: Guaranteed Sales Specification Units OH - Form H + Form Polymer Matrix Structure - Gel PolyStyrene Crosslinked with DVB Anion Cation Functional Group - Quaternary Amine Sulfonic acid Volume ratio - 60% 40% Total Exchange Capacity, min. meq/l 1.30 1.9 Water Retention Capacity % 53-60 45-50 Particle Size Distribution - - - >1.25 mm max. % 5 5
D301 is a very high capacity, bead form, weak base, macroporous type, anion resin made by epoxy polyamine condensation. It is a spherical bead form resin(unlike other granular formulations) suitable for use in high flowrate applications. The exceptionally high operating capacity and regeneration efficiency of D301 make it ideal for applications where the maximum possible throughput and minimum chemical dose are required. Typical physical & Chemical characteristics: Polymer Matrix Structure: Styrene Crosslinked with DVB Physical Form and Appearance: yellow spherical beads Whole Bead Count: 95% min. Functional Groups: R-N(CH3)2 Tertiary Amine Ionic Form ,as shipped: Free Base Total Exchange Capacity, CL- form, wet, volumetric 1.4 eq/l min. Water Retention inside of structure, CL- form: 50-60% Moisture content %: 5% max. Particle Size Range: 0.4mm-1.2mm¡Ý95% Swelling (FB-CL) : 20% Shipping Weight (approx.): 650-710 g/l Specific Gravity, moist CL- Form: 1.03-1.06 PH Range, Stability: 0 - 14. 25L /bag,1000L /big bag with pallet.
201x7 is a high capacity, shock resistant, gelular,Type I ,strongly basic anion exchange resin supplied in the chloride or hydroxide form as moist, uniform, spherical beads. 201x7 is intended for use in all type of deionization systems and chemical processing applications.. Typical physical & Chemical characteristics Polymer Matrix Structure: Styrene Crosslinked with DVB Physical Form and Appearance: Clear spherical beads Whole Bead Count: 95% min. Functional Groups: R-N(CH3)3+ Ionic Form ,as shipped: CL Total Exchange Capacity, CL- form, wet, volumetric 1.30 meq/l min. Moisture Retention, CL- form: 45-52% Particle Size Range: 0.4-0.8mm Swelling CL-¡ú OH-: 18-20% Shipping Weight (approx.): 670-720 g/l Specific Gravity, moist CL- Form: 1.09 PH Range, Stability: 0 - 14. 25L /bag,1000L /big bag with pallet.
We can supply any quantity & certified super high grade quality of hydrated lime in 25kg, 40kg & jumbo packaging for the 400kgs also with short timelines. If you are seeking 86+, 90+ & 96+ (pharma grade), we can supply the same to you also. Our entire product lines are iso 9001 certified. Serious buyers please contact immediately. Assuring of our best services at all times. 25kg, 40kg, 700kg
CAS: 15827-60-8 Molecular Formula: C9H28O15N3P5 Molecular weight: 573.2 1, Properties:DTPMPA is innocuous, easy to be dissolved in acid solution. DTPMPA has excellent scale and corrosion inhibiting and temperature tolerance ability. DTPMPA can inhibit the scale formation of carbonate, sulfate and phosphate.Under situation of alkali environment and high temperature (above 210oC) DTPMPA has better scale and corrosion inhibition effect than other organophosphines. 2, Specification: Items Index Appearance Yello Brow or red brown viscous liquid Active acid % ¡Ý 50.0 Phosphorous acid (as PO33-)% ¡Ü 3.0 Chloride (as Cl-)% ¡Ü 12-17 Density (20oC) g/cm3 1.35-1.45 pH (1% solution) ¡Ü 2.0 Fe ppm ¡Ü 35. 3,Application range&using method DTPMPA can be used as scale and corrosion inhibitor in circulating cool water system and boiler water, and especially good in alkali circulating cool water system without additional pH regulation, It can also be used as scale and corrosion inhibitor in oilfield refill water, cool water and boiler water with high concentration of barium carbonate. When used alone, little scale sediment is found even none of dispersant is used. DTPMPA can also be used as peroxide stabilizer, chelating agent in woven & dyeing industry, pigment dispersant, microelement's carrying agent in fertilizer and concrete modifier. In addition, DTPMPA is used in papermaking, electroplating, acid cleaning and cosmetics. 4.,Safety Protection:Acidity, Avoid contact with eye and skin, once contacted, flush with water. Package and Storage:Normally In 25kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition. ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. Appearance : Colorless or light yellow transparent liquid Active acid % : 48.0-52.0 Chloride (as Cl-)% : 2.0(or1.0) min pH value 1 solution : 2.0 max Fe (as Fe3+) (ppm) : 20 Density 20¡æg/cm3 : 1.33 min Colour Alpha (Hazen) : 40 max.
HEDP is an organ phosphoric acid corrosion inhibitor. It can chelate with FE, cu, and ZN ions to form stable chelating compounds. It can dissolve the oxidized materials on these metals surfaces. HEDP shows excellent scale and corrosion inhibition effects under temperature 250¡æ. HEDP has good chemical stability under high ph value, hard to be hydrolyzed, and hard to be decomposed under ordinary light and heat conditions. Its acid/alkali and chlorine oxidation tolerance are better than that of other organ phosphoric acids (salt). HEDP can react with metal ions in water system to form hexa-element chelating complex, with calcium ion in particular. Therefore, HEDP has good antiscale and visible threshold effects. When built together with other water treatment chemicals, it shows good synergistic effects. The solid state of HEDP is crystal powder, suitable for usage in winter and freezing districts. Because of its high purity, it can be used as cleaning agent in electronic fields and as additives in daily chemicals. Appearance: colorless or light yellow transparent liquid Active content HEDP : 58.0-62.0 Phosphorous acid as po33-%: 2.0 max Phosphoric acid aspo43- %: 0.8 max Chloride (as cl-)%: 0.01 max Ph 1 solution: 2 max Density 20¡æg/cm3: 1.40 Fe ion ppm : 10 max Colour alpha (hazen): 40 max.
HPMA is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330¡æ. HPMA has obvious threshold effect under high temperature (350¡æ) and high pH£¨8.3£©level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300¡æ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, HPMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA has good corrosion inhibition effect when used together with zinc salt. HPMA can also used as additives for cement. Appearance : Clear to umber transparent liquid Solid content % : 48.0 min Bromine value mg/g : 80.0 max Average molecular weight : 450 min pH 1 solution : 2.0-3.0 Density 20¡æ g/cm3 : 1.18 min.
CAS No 23783-26-8 Molecular Formula:C2H5O6P Molecular weight:156 Properties: HPAA is chemically stable, hard to be hydrolyzed, hard to be destroyed by acid or alkali, safety in use, no toxicity, no pollution. HPAA can improve zinc solubility. Its corrosion inhibition ability is 5-8 times better than that of HEDP and EDTMP. When built with low molecular polymers, its corrosion inhibition effect is even better. Specification: Appearance:Dark umber transparent viscous liquid Solid content %:47.0-50.0 Phosphorous acid(as PO33-)%:4.0 max Density(20 centigrade degrees)g/cm3:1.30 min pH(1% solution):1.0-3.0 Usage: HPAA is mainly used as cathode corrosion inhibitor in oilfield refill water system in fields such as steel & iron, petrochemcal, power plant and medical industries. When built with zinc salt, the effect is even better. Package and Storage: Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for one year in room shady and dry place.
Cyanuric acid General description: Formula: c3h3n3o3 Molecular weight: 129.1 Cas no. : 108-80-5 Appearance: White powder, granular or colored tablet form, non-toxic and odorless Specifications: Items Powder Granular Content 98.5%min 98.0%min Moisture 0.5%max 0.50%max Burnt residue 0.10%max 0.10%max Ph (1%solution) 4.0 min 4.0min Ammelide/ammeline 0.5%max Iron(fe) 20 ppm max Sulphate(so42-) 0.5%max Size 8-30mesh, 90%through Usage: For manufacture of chlorinated isocyanides. It¡¯s mainly used in synthesizing new type bleaching agent, resin, anti-oxidant, paint, coating, selective weedkiller and metal cyaniding slow corroding. And it also can be directly used as swimming pool chlorine stabilizer, nylon, plastic, polyester, fire-retardant agent and cosmetics additive. Package: In 25kg, 1000kg bag for powder. In 25kg plastic bag or 50kg pe drums for granular Or according to buyer's requirement 21mt/20fcl
Sodium dichloroisocyanurate (sdic) General description Formula : c3o3n3cl2na Molecular weight : 219.98 Un no. : 2465 Cas no. : 2839-78-9 Effective cl: 56% min: Ph value( 1% solution)5.5-6.5: Moisture: 8.0% max Water insoluble matter: 0.2%max: Granular: 8-30 mesh, 20-60 mesh(or decided by customer) Specifications Effective chloride = Appearance Moisture = Ph value 56% , 60% 62% White powder : 8.0 4.0 5.5-7.0 56% , 60% , 62% White granular : 8 -30m , 20 -40m , 20 -60m 8.0 4.0 5.5-7.0 56% , 60% , 62% White tablet : 1 , 3 , 5 , 20g, 100g 8.0 4.0 5.5-7.0 55% White tablet : 1 , 3 , 5 , 20g , 100g 12-14 % 5.5-7.0 30% , 40% ib White powder , granular, tablet Usage It is widely used for the sterilization of swimming pool and drinking water , or fighting against infectious diseases or act as water treatment in raising silkworm, livestock, poultry and fish .It is also used as detergent of tableware, bleaching agent for cotton and flax fabric and blend fabric, as germicide in hospitals, restaurants and also as deco lour, etc. Packing Tube, bucket, cardboard drum, pe-drum, carton, jumbo bag. 1kg, 2kg, 5kg, 10kg, 20kg, 25kg, 30kg, 50kg, 1000kg Or according to buyer's requirement Cautions Keep dry, out of sunlight and rain, avoid its contact with strong acids, strong bases and strong reducing agents 21mt/20fcl